Assets 5

Basic set of scripts to configure Betaflight from your Taranis TX (OpenTx)

This is a simplied set of configuration 'lua' scripts, based on the v0.3 version of the 'betaflight-tx-lua-scripts' repository. The 'betaflight-tx-lua-scripts' repository now contains many more screens. This version has only the "PIDs", "Rates" and "VTX" screens.

The VTX screen has the following enhancements:

  • Can step through available frequencies for bands / channels. Implements feature suggested by issue #33.

  • If Betaflight has 'SetFreqByMHzMsp' support then any frequency in MHz can be set (via band 'U'); see: http://www.etheli.com/CF/vtxCfgCMSFreqViaMsp

  • When doing a 'save' on the VTX screen, now performs an EEPROM_SAVE after updating the values (needed for latest version of Betaflight).

  • Shows 'Retrying' if save-retry happens.

Unpack the BFSetup .zip file corresponding to your transmitter onto the SD card in the transmitter.

To use this functionality a receiver that supports Smartport telemetry must be connected to a serial port (UART) on the flight controller; see here for a how-to: http://www.nitbeatfpv.com/tramphv-unify-vtx-settings-taranis

This article on Oscar Liang's site is also a good reference: https://oscarliang.com/betaflight-change-pid-vtx-settings-taranis

Also note the issue with inverted SBUS/Smartport signals, discussed here.

Dec 29, 2017

v0.4

Made vtx freq editable
Can step through available frequencies for bands / channels.

If Cleanflight/Betaflight has 'SetFreqByMHzMsp' support then any
frequency in MHz can be set (via band 'U').

Modified README.md
Dec 29, 2017

v0.3

Initial v0.3 fileset from old 'betaflight-tx-lua-scripts' repository.