Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

executable file 439 lines (401 sloc) 12.755 kb
#!/bin/bash
#Copyright (c) 2009 Eucalyptus Systems, Inc.
#
#This program is free software: you can redistribute it and/or modify
#it under the terms of the GNU General Public License as published by
#the Free Software Foundation, only version 3 of the License.
#
#This file is distributed in the hope that it will be useful, but WITHOUT
#ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
#FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
#for more details.
#
#You should have received a copy of the GNU General Public License along
#with this program. If not, see <http://www.gnu.org/licenses/>.
#
#Please contact Eucalyptus Systems, Inc., 130 Castilian
#Dr., Goleta, CA 93101 USA or visit <http://www.eucalyptus.com/licenses/>
#if you need additional information or have any questions.
#
#This file may incorporate work covered under the following copyright and
#permission notice:
#
# Software License Agreement (BSD License)
#
# Copyright (c) 2008, Regents of the University of California
#
#
# Redistribution and use of this software in source and binary forms, with
# or without modification, are permitted provided that the following
# conditions are met:
#
# Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
#
# Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
# IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
# PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
# OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. USERS OF
# THIS SOFTWARE ACKNOWLEDGE THE POSSIBLE PRESENCE OF OTHER OPEN SOURCE
# LICENSED MATERIAL, COPYRIGHTED MATERIAL OR PATENTED MATERIAL IN THIS
# SOFTWARE, AND IF ANY SUCH MATERIAL IS DISCOVERED THE PARTY DISCOVERING
# IT MAY INFORM DR. RICH WOLSKI AT THE UNIVERSITY OF CALIFORNIA, SANTA
# BARBARA WHO WILL THEN ASCERTAIN THE MOST APPROPRIATE REMEDY, WHICH IN
# THE REGENTS’ DISCRETION MAY INCLUDE, WITHOUT LIMITATION, REPLACEMENT
# OF THE CODE SO IDENTIFIED, LICENSING OF THE CODE SO IDENTIFIED, OR
# WITHDRAWAL OF THE CODE CAPABILITY TO THE EXTENT NEEDED TO COMPLY WITH
# ANY SUCH LICENSES OR RIGHTS.
#
#
# Init script for the Eucalyptus node controller.
#
# chkconfig: 2345 99 05
# description: script for starting and stopping eucalyptus node controller
#
### BEGIN INIT INFO
# Provides: eucalyptus-nc
# Required-Start: $remote_fs $syslog libvirtd
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Start Eucalyptus node controller
# Description: Start the Eucalyptus node controller
### END INIT INFO
#
# Do NOT "set -e"
# if we have lsb functions let's source them
WE_HAVE_LSB="N"
if [ -e /lib/lsb/init-functions ]; then
. /lib/lsb/init-functions
# very old lsb don't have the functions we need
if type log_daemon_msg > /dev/null 2> /dev/null ; then
WE_HAVE_LSB="Y"
fi
fi
if [ "$EUID" != "0" ]; then
echo "Eucalyptus init scritps must be run as root."
exit 1
fi
# I just wanted to set PATH to be the system PATH, but if a user install
# eucalyptus manually, it may have binaries in a non-standard position:
# hence we need to keep the PATH we receive.
export PATH=/sbin:/usr/sbin:/bin:/usr/bin:$PATH
DESC="Eucalyptus services"
NAME=eucalyptus-nc
BRCTL="`which brctl 2> /dev/null`"
MODPROBE="`which modprobe 2> /dev/null`"
EUCA_USER="eucalyptus"
# honor the ENV variable if found otherwise look in root
if [ -z "$EUCALYPTUS" ] ; then
EUCALYPTUS="@prefix@"
if [ ! -e ${EUCALYPTUS}/etc/eucalyptus/eucalyptus.conf ] ; then
EUCALYPTUS="/"
fi
fi
export EUCALYPTUS
create_httpd_config() {
IPS="all"
# let's configure the common parts for both CC and NC
cat $EUCALYPTUS/etc/eucalyptus/httpd.conf |sed "s|EUCALYPTUS|$EUCALYPTUS|"|sed "s|AXIS2C_HOME|$AXIS2C_HOME|"|sed "s|\(ServerRoot\).*|\1 "$HTTPD_HOME"|" |sed "s|EUCA_USER|$EUCA_USER|" > $EUCALYPTUS/etc/eucalyptus/httpd-tmp.conf
# load authz if we have it (ubuntu needs it)
if [ -e $HTTPD_HOME/usr/lib/apache2/modules/mod_authz_host.so ]; then
echo "LoadModule authz_host_module /usr/lib/apache2/modules/mod_authz_host.so" >> $EUCALYPTUS/etc/eucalyptus/httpd-tmp.conf
fi
# let's configure the NC
cat $EUCALYPTUS/etc/eucalyptus/httpd-tmp.conf |sed "s|\(Listen\).*|\1 $NC_PORT|"|sed "s|\(PidFile\).*|\1 $EUCALYPTUS/var/run/eucalyptus/eucalyptus-nc.pid|"|sed "s|\(Allow from\).*|\1 $IPS|"|sed "s|\(ErrorLog\).*|\1 $EUCALYPTUS/var/log/eucalyptus/httpd-nc_error_log|" > $EUCALYPTUS/etc/eucalyptus/httpd-nc.conf
}
# crude way to start the axis2c services
do_start() {
# fixes #469984
IPTABLES="`which iptables 2> /dev/null`"
if [ -n "$IPTABLES" ]; then
[ -x $IPTABLES ] && $IPTABLES -L -n > /dev/null 2> /dev/null
fi
if [ ! -x $HTTPD ]; then
echo
echo "cannot find httpd (was set to <$HTTPD>)!"
exit 1
fi
if [ ! -x $EUCALYPTUS/usr/sbin/euca_conf ]; then
echo "Some eucalyptus components are missing"
exit 1
fi
if ! $EUCALYPTUS/usr/sbin/euca_conf --check nc ; then
exit 1
fi
# we have a program to test the hypervisor and more for the NC
if [ ! -x $EUCALYPTUS/usr/sbin/euca_test_nc ]; then
echo
echo "Cannot check Node Controller: missing euca_test_nc."
else
# sometimes, libvirtd takes some time to start on init, so retry euca_test_nc a few times before failing
for i in 1 2 3 4 5
do
PASSED=0
if ( $EUCALYPTUS/usr/sbin/euca_test_nc $HYPERVISOR > $EUCALYPTUS/var/log/eucalyptus/euca_test_nc.log 2>&1 ); then
PASSED=1
else
sleep 1
fi
done
if ( test $PASSED = "0" ); then
echo
echo "Node Controller cannot be started: errors in $EUCALYPTUS/var/log/eucalyptus/euca_test_nc.log"
exit 1
fi
fi
# on SYSTEM or STATIC mode the bridge needs to exists
if [ "$VNET_MODE" = "SYSTEM" -o "$VNET_MODE" = "STATIC" ]; then
if [ -n "$BRCTL" -a -x $BRCTL ]; then
if ! $BRCTL show |grep $VNET_BRIDGE > /dev/null 2> /dev/null ; then
echo
echo "Warning! Cannot find bridge $VNET_BRIDGE: instances may be without net"
fi
fi
fi
# we need aoe loaded
if [ -z "$MODPROBE" ]; then
echo
echo "Cannot find modprobe: you may have problems."
elif ! $MODPROBE aoe ; then
echo
echo "Failed to load aoe: you may experience problems"
fi
# we need IP forwarding and we need to use iptable over the bridge
if [ -w /proc/sys/net/ipv4/ip_forward ]; then
VAL=`cat /proc/sys/net/ipv4/ip_forward`
if [ "$VAL" = "0" ]; then
echo
echo "Enabling IP forwarding for eucalyptus."
echo -n 1 > /proc/sys/net/ipv4/ip_forward
fi
fi
if [ -w /proc/sys/net/bridge/bridge-nf-call-iptables ]; then
VAL=`cat /proc/sys/net/bridge/bridge-nf-call-iptables`
if [ "$VAL" = "0" ]; then
echo
echo "Enabling bridge netfiltering for eucalyptus."
echo 1 > /proc/sys/net/bridge/bridge-nf-call-iptables
fi
fi
# let's be sure we have the right port for NC and CC
create_httpd_config
if ! $HTTPD -f $EUCALYPTUS/etc/eucalyptus/httpd-nc.conf ; then
echo
echo "Failed to start the NC!"
exit 1
fi
}
do_status() {
pidfile=$EUCALYPTUS/var/run/eucalyptus/eucalyptus-nc.pid
if [ -s $pidfile ]; then
pid=`cat $pidfile 2> /dev/null`
if ps axww|grep $pid|grep httpd-nc.conf > /dev/null ; then
# we are good
return 0
fi
fi
return 1
}
do_stop() {
pidfile=$EUCALYPTUS/var/run/eucalyptus/eucalyptus-nc.pid
# let's be sure we are killing the right process
if ! do_status ; then
rm -f $pidfile
return
fi
# now kill the services
if [ -s $pidfile ]; then
pid=`cat $pidfile 2> /dev/null`
kill $pid > /dev/null 2>&1
else
return
fi
timeout=5
while [ $timeout -gt 0 ]; do
if ps $pid > /dev/null 2>&1 ; then
sleep 1
timeout=$(($timeout - 1))
else
break
fi
done
if [ $timeout -eq 0 ]; then
kill -9 $pid > /dev/null 2>&1
fi
rm -f $pidfile
}
# Read configuration variable file if it is present
if [ -r $EUCALYPTUS/etc/eucalyptus/eucalyptus.conf ]; then
. $EUCALYPTUS/etc/eucalyptus/eucalyptus.conf
else
echo "Cannot find eucalyptus configuration file!"
exit 1
fi
if [ "$EUCALYPTUS" = "not_configured" ]; then
echo "EUCALYPTUS not configured!"
exit 1
fi
# let's see how many loop devices we have available
LOOP_AVL="`/bin/ls /dev/loop* 2> /dev/null|wc -l`"
if [ -z "$LOOP_AVL" -o "$LOOP_AVL" = "0" ]; then
echo "Couldn't find loop devices (/dev/loop*): expect problems"
elif [ $LOOP_AVL -lt 32 ]; then
echo "You should have at least 32 loop devices"
fi
if [ -z "$EUCA_USER" ] ; then
EUCA_USER="root"
fi
# let's try to pick the system apache2
HTTPD="`which apache2 2> /dev/null`" # .deb based machines
if [ -z "$HTTPD" ]; then
HTTPD="`which httpd 2> /dev/null`" # .rpm based machines
fi
if [ -z "$HTTPD" ]; then
HTTPD="`which httpd2 2> /dev/null`" # newer .rpm based machines
fi
HTTPD_HOME="/"
# let's find our dependencies
for y in $EUCALYPTUS/opt $EUCALYPTUS/packages $EUCALYPTUS /opt ; do
for x in `/bin/ls $y 2> /dev/null`; do
# this is for the RPM installed pacakges
if [ "$x" = "euca-axis2c" ]; then
if [ -e $y/$x/lib/libmod_axis2.so ]; then
export AXIS2C_HOME="$y/$x"
fi
fi
# this is for system or source installed
if [ "`echo $x | cut -f 1 -d -`" = "axis2c" ]; then
if [ -e $y/$x/lib/libmod_axis2.so ]; then
export AXIS2C_HOME="$y/$x"
fi
fi
done
done
# if we didn't find AXIS2C we'll pick the one we used at configuration
# time
if [ -z "$AXIS2C_HOME" ]; then
export AXIS2C_HOME="@AXIS2C_HOME@"
fi
# finally let's check the path
if [ ! -d "$AXIS2C_HOME" ]; then
echo "Cannot find AXIS2C_HOME?"
exit 1
fi
# do we have the httpd daemon?
if [ -z "${HTTPD}" ]; then
echo "apache2/httpd daemon not found!"
exit 1
fi
# set the library path correctly
export LD_LIBRARY_PATH="$AXIS2C_HOME/lib:$AXIS2C_HOME/modules/rampart:$EUCALYPTUS/usr/lib/eucalyptus"
case "$1" in
start)
if [ "$VERBOSE" != no ]; then
if [ "$WE_HAVE_LSB" = "Y" ]; then
log_daemon_msg "Starting $DESC" "$NAME"
else
echo -n "Starting $DESC: "
fi
fi
# let's check there is no previous NC running
if do_status ; then
echo
echo "another NC is already running!"
if [ "$VERBOSE" != no ]; then
if [ "$WE_HAVE_LSB" = "Y" ]; then
log_end_msg 1
fi
fi
exit 1
fi
rm -f /dev/shm/sem.eucalyptus-nc* /dev/shm/sem.eucalyptus-st*
do_start
case "$?" in
0|1)
if [ "$VERBOSE" != no ]; then
if [ "$WE_HAVE_LSB" = "Y" ]; then
log_end_msg 0
else
echo "done."
fi
fi
;;
*)
if [ "$VERBOSE" != no ]; then
if [ "$WE_HAVE_LSB" = "Y" ]; then
log_end_msg 1
else
echo "failed!"
fi
fi
;;
esac
;;
stop)
if [ "$VERBOSE" != no ]; then
if [ "$WE_HAVE_LSB" = "Y" ]; then
log_begin_msg "Stopping $DESC"
else
echo -n "Stopping $DESC: "
fi
fi
do_stop
rm -f /dev/shm/sem.eucalyptus-nc* /dev/shm/sem.eucalyptus-st*
if [ "$VERBOSE" != no ]; then
if [ "$WE_HAVE_LSB" = "Y" ]; then
log_end_msg 0
else
echo "done."
fi
fi
;;
restart)
if [ "$VERBOSE" != no ]; then
if [ "$WE_HAVE_LSB" = "Y" ]; then
log_begin_msg "Restarting $DESC"
else
echo -n "Restarting $DESC: "
fi
fi
# restart allow the CC to mantain the state across restart
do_stop
do_start
if [ "$VERBOSE" != no ]; then
if [ "$WE_HAVE_LSB" = "Y" ]; then
log_end_msg 0
else
echo "done."
fi
fi
;;
status)
if do_status ; then
echo "NC is running"
else
exit 3
fi
;;
config)
echo "EUCALYPTUS=${EUCALYPTUS}"
echo "AXIS2C_HOME=${AXIS2C_HOME}"
echo "HTTPD_HOME=${HTTPD_HOME}"
echo "HTTPD=${HTTPD}"
;;
*)
echo "Usage: $NAME {start|stop|restart}" >&2
exit 3
;;
esac
:
Jump to Line
Something went wrong with that request. Please try again.