Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

executable file 496 lines (451 sloc) 14.996 kb
#!/bin/bash
#
# Init script for the Eucalyptus node controller
#
# Copyright 2009-2012 Eucalyptus Systems, Inc.
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 3 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see http://www.gnu.org/licenses/.
#
# Please contact Eucalyptus Systems, Inc., 6755 Hollister Ave., Goleta
# CA 93117, USA or visit http://www.eucalyptus.com/licenses/ if you need
# additional information or have any questions.
#
# This file may incorporate work covered under the following copyright
# and permission notice:
#
# Software License Agreement (BSD License)
#
# Copyright (c) 2008, Regents of the University of California
# All rights reserved.
#
# Redistribution and use of this software in source and binary forms,
# with or without modification, are permitted provided that the
# following conditions are met:
#
# Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#
# Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer
# in the documentation and/or other materials provided with the
# distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE. USERS OF THIS SOFTWARE ACKNOWLEDGE
# THE POSSIBLE PRESENCE OF OTHER OPEN SOURCE LICENSED MATERIAL,
# COPYRIGHTED MATERIAL OR PATENTED MATERIAL IN THIS SOFTWARE,
# AND IF ANY SUCH MATERIAL IS DISCOVERED THE PARTY DISCOVERING
# IT MAY INFORM DR. RICH WOLSKI AT THE UNIVERSITY OF CALIFORNIA,
# SANTA BARBARA WHO WILL THEN ASCERTAIN THE MOST APPROPRIATE REMEDY,
# WHICH IN THE REGENTS' DISCRETION MAY INCLUDE, WITHOUT LIMITATION,
# REPLACEMENT OF THE CODE SO IDENTIFIED, LICENSING OF THE CODE SO
# IDENTIFIED, OR WITHDRAWAL OF THE CODE CAPABILITY TO THE EXTENT
# NEEDED TO COMPLY WITH ANY SUCH LICENSES OR RIGHTS.
#
# chkconfig: 2345 99 05
# description: eucalyptus node controller
#
### BEGIN INIT INFO
# Provides: eucalyptus-nc
# Required-Start: $remote_fs $syslog libvirtd
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Eucalyptus node controller
# Description: Eucalyptus node controller
### END INIT INFO
#
# Do NOT "set -e"
# Use the functions script for distributions that support it (e.g., RHEL)
# This allows Eucalyptus to use correct localization settings
[ -f /etc/init.d/functions ] && . /etc/init.d/functions
# For fault reporting: $LOCALE can be set in /etc/sysconfig/i18n
[ -n "$LOCALE" ] && export LOCALE || unset LOCALE
LOCKFILE=/var/lock/subsys/eucalyptus-nc
# if we have lsb functions let's source them
WE_HAVE_LSB="N"
if [ -e /lib/lsb/init-functions ]; then
. /lib/lsb/init-functions
# very old lsb don't have the functions we need
if type log_daemon_msg > /dev/null 2> /dev/null ; then
WE_HAVE_LSB="Y"
fi
fi
if [ "$EUID" != "0" ]; then
echo "Eucalyptus init scritps must be run as root."
exit 1
fi
# I just wanted to set PATH to be the system PATH, but if a user install
# eucalyptus manually, it may have binaries in a non-standard position:
# hence we need to keep the PATH we receive.
export PATH=/sbin:/usr/sbin:/bin:/usr/bin:$PATH
DESC="Eucalyptus services"
NAME=eucalyptus-nc
BRCTL="`which brctl 2> /dev/null`"
MODPROBE="`which modprobe 2> /dev/null`"
EUCA_USER="eucalyptus"
# honor the ENV variable if found otherwise look in root
if [ -z "$EUCALYPTUS" ] ; then
EUCALYPTUS="@prefix@"
if [ ! -e ${EUCALYPTUS}/etc/eucalyptus/eucalyptus.conf ] ; then
EUCALYPTUS="/"
fi
fi
export EUCALYPTUS
create_httpd_config() {
IPS="all"
# let's configure the common parts for both CC and NC
sed -e "s|EUCALYPTUS|$EUCALYPTUS|" \
-e "s|APACHE2_MODULE_DIR|$APACHE2_MODULE_DIR|" \
-e "s|AXIS2C_HOME|$AXIS2C_HOME|" \
-e "s|\(ServerRoot\).*|\1 "$HTTPD_HOME"|" \
-e "s|EUCA_USER|$EUCA_USER|" \
$EUCALYPTUS/etc/eucalyptus/httpd.conf \
> $EUCALYPTUS/etc/eucalyptus/httpd-tmp.conf
# load authz if we have it (ubuntu needs it)
if [ -e $HTTPD_HOME/usr/lib/apache2/modules/mod_authz_host.so ]; then
echo "LoadModule authz_host_module /usr/lib/apache2/modules/mod_authz_host.so" >> $EUCALYPTUS/etc/eucalyptus/httpd-tmp.conf
fi
# let's configure the NC
sed -e "s|\(Listen\).*|\1 $NC_PORT|" \
-e "s|\(PidFile\).*|\1 $EUCALYPTUS/var/run/eucalyptus/eucalyptus-nc.pid|" \
-e "s|\(Allow from\).*|\1 $IPS|" \
-e "s|\(ErrorLog\).*|\1 $EUCALYPTUS/var/log/eucalyptus/httpd-nc_error_log|" \
$EUCALYPTUS/etc/eucalyptus/httpd-tmp.conf \
> $EUCALYPTUS/etc/eucalyptus/httpd-nc.conf
}
# crude way to start the axis2c services
do_start() {
# check if NTPD is running and throw a fault if it is not
if [ ! `pgrep -n ntp` ]; then
# write fault to stdout
echo
$EUCALYPTUS/usr/sbin/euca-generate-fault 1008 daemon ntp
# and to NC's fault log
$EUCALYPTUS/usr/sbin/euca-generate-fault -c nc 1008 daemon ntp
fi
# fixes #469984
IPTABLES="`which iptables 2> /dev/null`"
if [ -n "$IPTABLES" ]; then
[ -x $IPTABLES ] && $IPTABLES -L -n > /dev/null 2> /dev/null
fi
if [ ! -x $HTTPD ]; then
echo
echo "cannot find httpd (was set to <$HTTPD>)!"
exit 1
fi
if [ ! -x $EUCALYPTUS/usr/sbin/euca_conf ]; then
echo "Some eucalyptus components are missing"
exit 1
fi
# Add loop devices if necessary (and possible)
[ -z "$CREATE_NC_LOOP_DEVICES" ] && CREATE_NC_LOOP_DEVICES=256
if [ "$CREATE_NC_LOOP_DEVICES" -gt 0 ] 2>/dev/null; then
"$EUCALYPTUS/usr/share/eucalyptus/create-loop-devices" $CREATE_NC_LOOP_DEVICES
fi
# let's see how many loop devices we have available
LOOP_AVL_DEV="`/bin/ls -1d /dev/loop* 2>/dev/null | wc -l`"
LOOP_AVL_SYS="`/bin/ls -1d /sys/block/loop* 2>/dev/null | wc -l`"
if [ -z "$LOOP_AVL_DEV" -o "$LOOP_AVL_DEV" = "0" ]; then
echo "warning: no loop devices found in /dev; expect problems" >&2
elif [ $LOOP_AVL_DEV -lt 50 ]; then
echo "warning: found $LOOP_AVL_DEV loop devices in /dev; at least 50 are recommended" >&2
elif [ -z "$LOOP_AVL_SYS" -o "$LOOP_AVL_SYS" -lt "$LOOP_AVL_DEV" ] && [[ `uname -r` < 2.6.22 ]]; then # The version comparison does not work in every shell
# When then loop driver's max_loop option is not 0, loop device nodes
# that are not automatically created by the kernel do not work. We can
# check for this case by looking for too few loop device entries in
# sysfs.
#
# Trying to determine whether or not max_loop is 0 is difficult on
# Linux 2, so in general we make no attempt to do so. However, max_loop
# *cannot* be 0 on Linux < 2.6.22, so we perform this check on those
# systems so it will hopefully cover the majority of cases.
echo "warning: found fewer loop devices in /sys/block than in /dev ($LOOP_AVL_SYS < $LOOP_AVL_DEV); expect problems"
fi
if ! $EUCALYPTUS/usr/sbin/euca_conf --check nc ; then
exit 1
fi
# we have a program to test the hypervisor and more for the NC
if [ ! -x $EUCALYPTUS/usr/sbin/euca_test_nc ]; then
echo
echo "Cannot check Node Controller: missing euca_test_nc."
else
# sometimes, libvirtd takes some time to start on init, so retry euca_test_nc a few times before failing
for i in 1 2 3 4 5
do
PASSED=0
if ( $EUCALYPTUS/usr/sbin/euca_test_nc $HYPERVISOR > $EUCALYPTUS/var/log/eucalyptus/euca_test_nc.log 2>&1 ); then
PASSED=1
else
sleep 1
fi
done
if ( test $PASSED = "0" ); then
echo
echo "Node Controller cannot be started: errors in $EUCALYPTUS/var/log/eucalyptus/euca_test_nc.log"
exit 1
fi
fi
# on SYSTEM or STATIC mode the bridge needs to exists
if [ "$VNET_MODE" = "SYSTEM" -o "$VNET_MODE" = "STATIC" ]; then
if [ -n "$BRCTL" -a -x $BRCTL ]; then
if ! $BRCTL show |grep $VNET_BRIDGE > /dev/null 2> /dev/null ; then
echo
echo "Warning! Cannot find bridge $VNET_BRIDGE: instances may be without net"
fi
fi
fi
# we need IP forwarding and we need to use iptable over the bridge
if [ -w /proc/sys/net/ipv4/ip_forward ]; then
VAL=`cat /proc/sys/net/ipv4/ip_forward`
if [ "$VAL" = "0" ]; then
echo
echo "Enabling IP forwarding for eucalyptus."
echo -n 1 > /proc/sys/net/ipv4/ip_forward
fi
fi
if [ -w /proc/sys/net/bridge/bridge-nf-call-iptables ]; then
VAL=`cat /proc/sys/net/bridge/bridge-nf-call-iptables`
if [ "$VAL" = "0" ]; then
echo
echo "Enabling bridge netfiltering for eucalyptus."
echo 1 > /proc/sys/net/bridge/bridge-nf-call-iptables
fi
fi
# let's be sure we have the right port for NC and CC
create_httpd_config
if [ -x $EUCALYPTUS/usr/sbin/eucanetd ]; then
if ! $EUCALYPTUS/usr/sbin/eucanetd ; then
echo
echo "Failed to start the eucanetd"
fi
fi
if ! $HTTPD -f $EUCALYPTUS/etc/eucalyptus/httpd-nc.conf ; then
echo
echo "Failed to start the NC!"
exit 1
fi
touch $LOCKFILE
}
do_status() {
pidfile=$EUCALYPTUS/var/run/eucalyptus/eucalyptus-nc.pid
if [ -s $pidfile ]; then
pid=`cat $pidfile 2> /dev/null`
if ps axww|grep $pid|grep httpd-nc.conf > /dev/null ; then
# we are good
return 0
fi
fi
return 1
}
do_stop() {
netpid="$EUCALYPTUS/var/run/eucalyptus/eucanetd.pid"
if [ -f "$netpid" ]; then
kill `cat $netpid` >/dev/null 2>&1
rm -f $netpid
fi
pidfile=$EUCALYPTUS/var/run/eucalyptus/eucalyptus-nc.pid
# let's be sure we are killing the right process
if ! do_status ; then
rm -f $pidfile
return
fi
# now kill the services
if [ -s $pidfile ]; then
pid=`cat $pidfile 2> /dev/null`
kill $pid > /dev/null 2>&1
else
return
fi
timeout=5
while [ $timeout -gt 0 ]; do
if ps $pid > /dev/null 2>&1 ; then
sleep 1
timeout=$(($timeout - 1))
else
break
fi
done
if [ $timeout -eq 0 ]; then
kill -9 $pid > /dev/null 2>&1
fi
rm -f $pidfile
rm -f $LOCKFILE
}
# Read configuration variable file if it is present
if [ -r $EUCALYPTUS/etc/eucalyptus/eucalyptus.conf ]; then
. $EUCALYPTUS/etc/eucalyptus/eucalyptus.conf
else
echo "Cannot find eucalyptus configuration file!"
exit 1
fi
if [ "$EUCALYPTUS" = "not_configured" ]; then
echo "EUCALYPTUS not configured!"
exit 1
fi
if [ -z "$EUCA_USER" ] ; then
EUCA_USER="root"
fi
# let's try to pick the system apache2
HTTPD="`which apache2 2> /dev/null`" # .deb based machines
if [ -z "$HTTPD" ]; then
HTTPD="`which httpd 2> /dev/null`" # .rpm based machines
fi
if [ -z "$HTTPD" ]; then
HTTPD="`which httpd2 2> /dev/null`" # newer .rpm based machines
fi
HTTPD_HOME="/"
if [ -d "@AXIS2C_HOME@" -a -e @AXIS2C_HOME@/services/EucalyptusNC ]; then
export AXIS2C_HOME="@AXIS2C_HOME@"
else
# let's find our dependencies
for y in $EUCALYPTUS/opt $EUCALYPTUS/packages $EUCALYPTUS /opt ; do
for x in `/bin/ls $y 2> /dev/null`; do
# this is for system or source installed
if [ "`echo $x | cut -f 1 -d -`" = "axis2c" ]; then
if [ -e $y/$x/lib/libmod_axis2.so -a \
-e $y/$x/services/EucalyptusNC ]; then
export AXIS2C_HOME="$y/$x"
break
fi
fi
done
done
fi
if [ -z "$AXIS2C_HOME" ]; then
echo "Cannot find AXIS2C_HOME?"
exit 1
fi
# do we have the httpd daemon?
if [ -z "${HTTPD}" ]; then
echo "apache2/httpd daemon not found!"
exit 1
fi
if [ -z "${APACHE2_MODULE_DIR}" ]; then
export APACHE2_MODULE_DIR="@APACHE2_MODULE_DIR@"
fi
if [ ! -d "$APACHE2_MODULE_DIR" ]; then
echo "Cannot find APACHE2_MODULE_DIR?"
exit 1
fi
# set the library path correctly
export LD_LIBRARY_PATH="$AXIS2C_HOME/lib:$AXIS2C_HOME/modules/rampart:$EUCALYPTUS/usr/lib/eucalyptus"
case "$1" in
start)
if [ "$VERBOSE" != no ]; then
if [ "$WE_HAVE_LSB" = "Y" ]; then
log_daemon_msg "Starting $DESC" "$NAME"
else
echo -n "Starting $DESC: "
fi
fi
# let's check there is no previous NC running
if do_status ; then
echo
echo "another NC is already running!"
if [ "$VERBOSE" != no ]; then
if [ "$WE_HAVE_LSB" = "Y" ]; then
log_end_msg 1
fi
fi
exit 1
fi
rm -f /dev/shm/sem.eucalyptus-nc* /dev/shm/sem.eucalyptus-st*
do_start
case "$?" in
0|1)
if [ "$VERBOSE" != no ]; then
if [ "$WE_HAVE_LSB" = "Y" ]; then
log_end_msg 0
else
echo "done."
fi
fi
;;
*)
if [ "$VERBOSE" != no ]; then
if [ "$WE_HAVE_LSB" = "Y" ]; then
log_end_msg 1
else
echo "failed!"
fi
fi
;;
esac
;;
stop)
if [ "$VERBOSE" != no ]; then
if [ "$WE_HAVE_LSB" = "Y" ]; then
log_begin_msg "Stopping $DESC"
else
echo -n "Stopping $DESC: "
fi
fi
do_stop
rm -f /dev/shm/sem.eucalyptus-nc* /dev/shm/sem.eucalyptus-st*
if [ "$VERBOSE" != no ]; then
if [ "$WE_HAVE_LSB" = "Y" ]; then
log_end_msg 0
else
echo "done."
fi
fi
;;
restart)
if [ "$VERBOSE" != no ]; then
if [ "$WE_HAVE_LSB" = "Y" ]; then
log_begin_msg "Restarting $DESC"
else
echo -n "Restarting $DESC: "
fi
fi
# restart allow the CC to mantain the state across restart
do_stop
do_start
if [ "$VERBOSE" != no ]; then
if [ "$WE_HAVE_LSB" = "Y" ]; then
log_end_msg 0
else
echo "done."
fi
fi
;;
status)
if do_status ; then
echo "NC is running"
else
exit 3
fi
;;
config)
echo "EUCALYPTUS=${EUCALYPTUS}"
echo "AXIS2C_HOME=${AXIS2C_HOME}"
echo "HTTPD_HOME=${HTTPD_HOME}"
echo "HTTPD=${HTTPD}"
;;
*)
echo "Usage: $NAME {start|stop|restart}" >&2
exit 3
;;
esac
:
Jump to Line
Something went wrong with that request. Please try again.