network:
  schema: http
  host: evcc.local
  port: 7070

interval: 10s # control cycle interval

# log settings
log: info
levels:
  site: debug
  lp-1: debug
  lp-2: debug
  cache: error
  db: error

# meter definitions
# for documentation see https://docs.evcc.io/docs/devices/meters
meters:
  - name: mt175
    type: template
    template: tasmota
    usage: grid
    host: 192.168.178.31 # IP-Adresse oder Hostname
    user: admin
    password: xxx 

# charger definitions
# for documentation see https://docs.evcc.io/docs/devices/chargers
chargers:
  - name: steckdose
    type: template
    template: tasmota
    host: 192.168.178.19 # IP-Adresse oder Hostname
    user: # Standard-User ist admin (Optional)
    password: # Passwort des Benutzerkontos (bei führenden Nullen bitte in einfache Hochkommata setzen) (Optional)
    channel: 1 # Nummer des Schaltkanals (1-8), bei Geräten mit mehr als einem Schalter
    standbypower: 15 # Leistung oberhalb des angegebenen Wertes wird als Ladeleistung gewertet (Optional) 

# vehicle definitions
# for documentation see https://docs.evcc.io/docs/devices/vehicles
vehicles:
  - name: tesla_model_3
    type: template
    template: tesla
    title: Tesla Model 3
    accessToken: xxx
    refreshToken: xxx
    vin: # Erforderlich, wenn mehrere Fahrzeuge des Herstellers vorhanden sind (Optional)
    capacity: 77 # Akkukapazität in kWh (Optional) 
    targetSoc: 95
    minCurrent: 2
    maxCurrent: 6

# site describes the EVU connection, PV and home battery
site:
  title: Home # display name for UI
  meters:
    grid: mt175 
  residualPower: 0 # egt den Soll-Arbeitspunkt der Überschussregelung am Netzübergang (Gridmeter) fest. Der Standardwert ist 0 W. Negative Werte verschieben den Sollwert in Richtung Netzeinspeisung, positive Werte in Richtung Netzbezug. Letztendlich wird mit diesem Wert der durch die Steuerung einzustellende "Ruhezustand" des Regelkreises eingestellt.
  prioritySoc: 0 # give home battery priority up to this soc (empty to disable)
  bufferSoc: 0 # continue charging on battery above soc (0 to disable)
  bufferStartSoc: 0 # start charging on battery above soc (0 to disable)
  maxGridSupplyWhileBatteryCharging: 0 # ignore battery charging if AC consumption is above this value
  smartCostLimit: 0 # set cost limit for automatic charging in PV mode

# loadpoint describes the charger, charge meter and connected vehicle
loadpoints:
  - title: Garage # display name for UI
    charger: steckdose # charger
    mode: pv # set default charge mode
    vehicle: tesla_model_3
    resetOnDisconnect: true # set defaults when vehicle disconnects
    phases: 1 # electrical connection (normal charger: default 3 for 3 phase, 1p3p charger: 0 for "auto" or 1/3 for fixed phases)
    minCurrent: 2 # minimum charge current (default 6A)
    maxCurrent: 6 # maximum charge current (default 16A)

    # remaining settings are experts-only and best left at default values
    priority: 0
    soc:
      poll:
        mode: charging
        interval: 60m
      estimate: true # set false to disable interpolating between api updates (not recommended)
    enable: # pv mode enable behavior
      delay: 1m # threshold must be exceeded for this long
      threshold: 0 # grid power threshold (in Watts, negative=export). If zero, export must exceed minimum charge power to enable
    disable: # pv mode disable behavior
      delay: 3m # threshold must be exceeded for this long
      threshold: 0 # maximum import power (W)
    guardDuration: 5m # switch charger contactor not more often than this (default 5m)

# push messages
messaging:
  events:
    start: # charge start event
      title: Charge started
      msg: Started charging in "${mode}" mode
    stop: # charge stop event
      title: Charge finished
      msg: Finished charging ${chargedEnergy:%.1fk}kWh in ${chargeDuration}.
    connect: # vehicle connect event
      title: Car connected
      msg: "Car connected at ${pvPower:%.1fk}kW PV"
    disconnect: # vehicle connected event
      title: Car disconnected
      msg: Car disconnected after ${connectedDuration}
    soc: # vehicle soc update event
      title: Soc updated
      msg: Battery charged to ${vehicleSoc:%.0f}%
    guest: # vehicle could not be identified
      title: Unknown vehicle
      msg: Unknown vehicle, guest connected?