diff --git a/_devices/Arlec-PB89HA_Plug.md b/_devices/Arlec-PB89HA_Plug.md
index 8b137891..6bec2748 100644
--- a/_devices/Arlec-PB89HA_Plug.md
+++ b/_devices/Arlec-PB89HA_Plug.md
@@ -1 +1,111 @@
+---
+title: Arlec PCB89HA Power Board
+date-published: 2020-01-04
+type: plug
+standard: au
+---
+1. TOC
+{:toc}
 
+## GPIO Pinout
+
+| Pin     | Function                           |
+|---------|------------------------------------|
+| GPIO1   | LED (Inverted: true)               |
+| GPIO3   | Button (Inverted: true)            |
+| GPIO04  | Relay 2                            |
+| GPIO05  | Relay 1                            |
+| GPIO12  | Relay 4                            |
+| GPIO13  | Relay 3                            |
+
+## Basic Configuration
+
+```yaml
+# Basic Config
+substitutions:
+  device_name: "arlec_PCB89HA_1"
+  name: "ARLEC PCB89HA"
+  
+esphome:
+  name: ${device_name}
+  comment: ${name}
+  platform: ESP8266
+  board: esp01_1m
+  
+wifi:
+  ssid: 'ssid'
+  password: 'password'
+  
+logger:
+  # Important! The status LED and button are on the Pins used by UART0
+  hardware_uart: UART1
+
+api:
+  password: 'api_password'
+
+ota:
+  password: 'ota_password'
+  
+status_led:
+  pin: 
+    number: GPIO1
+    inverted: True
+  
+sensor:
+  - platform: uptime
+    name: ${name} Uptime
+    
+  - platform: wifi_signal
+    name: ${name} Signal
+    update_interval: 300s
+
+binary_sensor:
+  - platform: gpio
+    pin: 
+      number: GPIO3
+      inverted: True
+    name: ${name} button
+    internal: True
+    on_multi_click:
+      # Support a single or double click to switch on each relay
+      - timing:
+          # Single click
+          - ON for at most 1s
+          - OFF for at least 0.5s
+        then:
+          - switch.toggle: relay_a
+
+      - timing:
+          # Double click
+          - ON for at most 1s
+          - OFF for at most 1s
+          - ON for at most 1s
+          - OFF for at least 0.2s
+        then:
+          - switch.toggle: relay_b
+
+switch:
+  - platform: gpio
+    pin: GPIO05
+    name: "${name} - A"
+    id: relay_a
+    restore_mode: always off
+          
+  - platform: gpio
+    pin: GPIO04
+    name: "${name} - B"
+    id: relay_b
+    restore_mode: always off
+
+  - platform: gpio
+    pin: GPIO13
+    name: "${name} - C"
+    id: relay_c
+    restore_mode: always off
+          
+  - platform: gpio
+    pin: GPIO12
+    name: "${name} - D"
+    id: relay_d
+    restore_mode: always off
+```