Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

0x8006 not interpretated by ZGUI #101

Closed
pipiche38 opened this issue Dec 17, 2018 · 7 comments

Comments

@pipiche38
Copy link

commented Dec 17, 2018

When doing a 'Reset' , while all 0x8003/0x8004/0x8005 are correctly interated in the Message View, this is not the case for 0x8006

Type: 0x8006 (Unrecognized)

@pipiche38

This comment has been minimized.

Copy link
Author

commented Dec 17, 2018

in Addition here is what I have in the Raw data
19:22:12.873 <- 01 80 06 00 02 85 01 00 03

8006 Command Type
0002 Lenght
85 CRC
VALUE: 01
RSSI: 00

This is not matching what is described in the zigate.fr command table, as the expected values are
0x00 for STARTUP
0x02 for NFN_START
0x06 for RUNNING

@ISO-B

This comment has been minimized.

Copy link
Collaborator

commented Mar 6, 2019

At the moment correct values are:
0x00 for STARTUP
0x01 for RUNNING if firmware has built without FULL_FUNC_DEVICE flag. If flag is used then 0x01 is NFN_START and 0x02 is RUNNING.

It would be best to change code so 0x01 would be always RUNNING and 0x02 would be NFN_START

@pipiche38

This comment has been minimized.

Copy link
Author

commented Mar 6, 2019

Will update on my side with 0x01 = running

ISO-B added a commit to ISO-B/ZiGate-firmware that referenced this issue Mar 6, 2019

@pipiche38

This comment has been minimized.

Copy link
Author

commented Mar 6, 2019

thanks

fairecasoimeme added a commit that referenced this issue Mar 7, 2019

@ISO-B

This comment has been minimized.

Copy link
Collaborator

commented Mar 7, 2019

@fairecasoimeme just to notify you that documentation needs update.

@ISO-B ISO-B added this to the v3.1a milestone Mar 7, 2019

@fairecasoimeme

This comment has been minimized.

Copy link
Owner

commented Mar 7, 2019

ok thanks, I added to my todolist ;)

@fairecasoimeme

This comment has been minimized.

Copy link
Owner

commented Mar 7, 2019

Finally, I updated

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Projects
None yet
3 participants
You can’t perform that action at this time.