Headless mode is a system configuration which enables access to FedBerry (at first boot) using ssh from another computer on a network. When this feature is enabled, the initial-setup service is bypassed and disabled.
Enable Headless mode
After copying Fedberry to your SD card, mount the /boot partition and create a text file called
headless.txt(if using Windows).
If your RPi requires a static IP Address, add the following lines to your /boot/headless config file:
IPADDR=<Required RPi static IP address> NETMASK=<Network subnet mask> GATEWAY=<Router/gateway IP address>
IPADDR=192.168.1.20 NETMASK=255.255.255.0 GATEWAY=192.168.1.1
- Unmout your SD card and use it to boot Fedberry in headless mode.