New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Backport fix for LineageOS issue #492 to Pie #3
Backport fix for LineageOS issue #492 to Pie #3
Conversation
This is partly a backport of d6c0a4f (ipv4: Kill 'rt_src' from 'struct rtable'). skb->sk can be null, and in fact it is when creating the buffer in inet_rtm_getroute. There is no other way of accessing the flow, so pass it directly. Fixes invalid memory address when running 'ip route get $IPADDR' Bug: https://gitlab.com/LineageOS/issues/android/issues/492 Change-Id: I7b9e5499614b96360c9c8420907e82e145bb97f3
@surblazer since this repo is a fork and not the official one, may I ask which Gerrit? |
@antoineco I'm sorry, I deleted original message cause just confused with LineageOS one. Of course, no need to use gerrit here :) |
Looks like I was too fast! Thanks for the confirmation. |
FYI pitrus is now I'm not experiencing any more crash since today's build. |
I've seen a fair number of issues with kswapd and other processes appearing to get stuck in v3.12-rc. Using sysrq-p many times seems to indicate that it gets stuck somewhere in list_lru_walk_node(), called from prune_icache_sb() and super_cache_scan(). I never seem to be able to trigger a calltrace for functions above that point. So I decided to add the following to super_cache_scan(): @@ -81,10 +81,14 @@ static unsigned long super_cache_scan(struct shrinker *shrink, inodes = list_lru_count_node(&sb->s_inode_lru, sc->nid); dentries = list_lru_count_node(&sb->s_dentry_lru, sc->nid); total_objects = dentries + inodes + fs_objects + 1; +printk("%s:%u: %s: dentries %lu inodes %lu total %lu\n", current->comm, current->pid, __func__, dentries, inodes, total_objects); /* proportion the scan between the caches */ dentries = mult_frac(sc->nr_to_scan, dentries, total_objects); inodes = mult_frac(sc->nr_to_scan, inodes, total_objects); +printk("%s:%u: %s: dentries %lu inodes %lu\n", current->comm, current->pid, __func__, dentries, inodes); +BUG_ON(dentries == 0); +BUG_ON(inodes == 0); /* * prune the dcache first as the icache is pinned by it, then @@ -99,7 +103,7 @@ static unsigned long super_cache_scan(struct shrinker *shrink, freed += sb->s_op->free_cached_objects(sb, fs_objects, sc->nid); } - +printk("%s:%u: %s: dentries %lu inodes %lu freed %lu\n", current->comm, current->pid, __func__, dentries, inodes, freed); drop_super(sb); return freed; } and shortly thereafter, having applied some pressure, I got this: update-apt-xapi:1616: super_cache_scan: dentries 25632 inodes 2 total 25635 update-apt-xapi:1616: super_cache_scan: dentries 1023 inodes 0 ------------[ cut here ]------------ Kernel BUG at c0101994 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#3] SMP ARM Modules linked in: fuse rfcomm bnep bluetooth hid_cypress CPU: 0 PID: 1616 Comm: update-apt-xapi Tainted: G D 3.12.0-rc7+ #154 task: daea1200 ti: c3bf8000 task.ti: c3bf8000 PC is at super_cache_scan+0x1c0/0x278 LR is at trace_hardirqs_on+0x14/0x18 Process update-apt-xapi (pid: 1616, stack limit = 0xc3bf8240) ... Backtrace: (super_cache_scan) from [<c00cd69c>] (shrink_slab+0x254/0x4c8) (shrink_slab) from [<c00d09a0>] (try_to_free_pages+0x3a0/0x5e0) (try_to_free_pages) from [<c00c59cc>] (__alloc_pages_nodemask+0x5) (__alloc_pages_nodemask) from [<c00e07c0>] (__pte_alloc+0x2c/0x13) (__pte_alloc) from [<c00e3a70>] (handle_mm_fault+0x84c/0x914) (handle_mm_fault) from [<c001a4cc>] (do_page_fault+0x1f0/0x3bc) (do_page_fault) from [<c001a7b0>] (do_translation_fault+0xac/0xb8) (do_translation_fault) from [<c000840c>] (do_DataAbort+0x38/0xa0) (do_DataAbort) from [<c00133f8>] (__dabt_usr+0x38/0x40) Notice that we had a very low number of inodes, which were reduced to zero my mult_frac(). Now, prune_icache_sb() calls list_lru_walk_node() passing that number of inodes (0) into that as the number of objects to scan: long prune_icache_sb(struct super_block *sb, unsigned long nr_to_scan, int nid) { LIST_HEAD(freeable); long freed; freed = list_lru_walk_node(&sb->s_inode_lru, nid, inode_lru_isolate, &freeable, &nr_to_scan); which does: unsigned long list_lru_walk_node(struct list_lru *lru, int nid, list_lru_walk_cb isolate, void *cb_arg, unsigned long *nr_to_walk) { struct list_lru_node *nlru = &lru->node[nid]; struct list_head *item, *n; unsigned long isolated = 0; spin_lock(&nlru->lock); restart: list_for_each_safe(item, n, &nlru->list) { enum lru_status ret; /* * decrement nr_to_walk first so that we don't livelock if we * get stuck on large numbesr of LRU_RETRY items */ if (--(*nr_to_walk) == 0) break; So, if *nr_to_walk was zero when this function was entered, that means we're wanting to operate on (~0UL)+1 objects - which might as well be infinite. Clearly this is not correct behaviour. If we think about the behaviour of this function when *nr_to_walk is 1, then clearly it's wrong - we decrement first and then test for zero - which results in us doing nothing at all. A post-decrement would give the desired behaviour - we'd try to walk one object and one object only if *nr_to_walk were one. It also gives the correct behaviour for zero - we exit at this point. Fixes: 5cedf72 ("list_lru: fix broken LRU_RETRY behaviour") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Dave Chinner <dchinner@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> [ Modified to make sure we never underflow the count: this function gets called in a loop, so the 0 -> ~0ul transition is dangerous - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Change-Id: I8c53bcc4c70ed978e6cf81a6f38fb06a59cc64ce
I've seen a fair number of issues with kswapd and other processes appearing to get stuck in v3.12-rc. Using sysrq-p many times seems to indicate that it gets stuck somewhere in list_lru_walk_node(), called from prune_icache_sb() and super_cache_scan(). I never seem to be able to trigger a calltrace for functions above that point. So I decided to add the following to super_cache_scan(): @@ -81,10 +81,14 @@ static unsigned long super_cache_scan(struct shrinker *shrink, inodes = list_lru_count_node(&sb->s_inode_lru, sc->nid); dentries = list_lru_count_node(&sb->s_dentry_lru, sc->nid); total_objects = dentries + inodes + fs_objects + 1; +printk("%s:%u: %s: dentries %lu inodes %lu total %lu\n", current->comm, current->pid, __func__, dentries, inodes, total_objects); /* proportion the scan between the caches */ dentries = mult_frac(sc->nr_to_scan, dentries, total_objects); inodes = mult_frac(sc->nr_to_scan, inodes, total_objects); +printk("%s:%u: %s: dentries %lu inodes %lu\n", current->comm, current->pid, __func__, dentries, inodes); +BUG_ON(dentries == 0); +BUG_ON(inodes == 0); /* * prune the dcache first as the icache is pinned by it, then @@ -99,7 +103,7 @@ static unsigned long super_cache_scan(struct shrinker *shrink, freed += sb->s_op->free_cached_objects(sb, fs_objects, sc->nid); } - +printk("%s:%u: %s: dentries %lu inodes %lu freed %lu\n", current->comm, current->pid, __func__, dentries, inodes, freed); drop_super(sb); return freed; } and shortly thereafter, having applied some pressure, I got this: update-apt-xapi:1616: super_cache_scan: dentries 25632 inodes 2 total 25635 update-apt-xapi:1616: super_cache_scan: dentries 1023 inodes 0 ------------[ cut here ]------------ Kernel BUG at c0101994 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#3] SMP ARM Modules linked in: fuse rfcomm bnep bluetooth hid_cypress CPU: 0 PID: 1616 Comm: update-apt-xapi Tainted: G D 3.12.0-rc7+ #154 task: daea1200 ti: c3bf8000 task.ti: c3bf8000 PC is at super_cache_scan+0x1c0/0x278 LR is at trace_hardirqs_on+0x14/0x18 Process update-apt-xapi (pid: 1616, stack limit = 0xc3bf8240) ... Backtrace: (super_cache_scan) from [<c00cd69c>] (shrink_slab+0x254/0x4c8) (shrink_slab) from [<c00d09a0>] (try_to_free_pages+0x3a0/0x5e0) (try_to_free_pages) from [<c00c59cc>] (__alloc_pages_nodemask+0x5) (__alloc_pages_nodemask) from [<c00e07c0>] (__pte_alloc+0x2c/0x13) (__pte_alloc) from [<c00e3a70>] (handle_mm_fault+0x84c/0x914) (handle_mm_fault) from [<c001a4cc>] (do_page_fault+0x1f0/0x3bc) (do_page_fault) from [<c001a7b0>] (do_translation_fault+0xac/0xb8) (do_translation_fault) from [<c000840c>] (do_DataAbort+0x38/0xa0) (do_DataAbort) from [<c00133f8>] (__dabt_usr+0x38/0x40) Notice that we had a very low number of inodes, which were reduced to zero my mult_frac(). Now, prune_icache_sb() calls list_lru_walk_node() passing that number of inodes (0) into that as the number of objects to scan: long prune_icache_sb(struct super_block *sb, unsigned long nr_to_scan, int nid) { LIST_HEAD(freeable); long freed; freed = list_lru_walk_node(&sb->s_inode_lru, nid, inode_lru_isolate, &freeable, &nr_to_scan); which does: unsigned long list_lru_walk_node(struct list_lru *lru, int nid, list_lru_walk_cb isolate, void *cb_arg, unsigned long *nr_to_walk) { struct list_lru_node *nlru = &lru->node[nid]; struct list_head *item, *n; unsigned long isolated = 0; spin_lock(&nlru->lock); restart: list_for_each_safe(item, n, &nlru->list) { enum lru_status ret; /* * decrement nr_to_walk first so that we don't livelock if we * get stuck on large numbesr of LRU_RETRY items */ if (--(*nr_to_walk) == 0) break; So, if *nr_to_walk was zero when this function was entered, that means we're wanting to operate on (~0UL)+1 objects - which might as well be infinite. Clearly this is not correct behaviour. If we think about the behaviour of this function when *nr_to_walk is 1, then clearly it's wrong - we decrement first and then test for zero - which results in us doing nothing at all. A post-decrement would give the desired behaviour - we'd try to walk one object and one object only if *nr_to_walk were one. It also gives the correct behaviour for zero - we exit at this point. Fixes: 5cedf72 ("list_lru: fix broken LRU_RETRY behaviour") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Dave Chinner <dchinner@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> [ Modified to make sure we never underflow the count: this function gets called in a loop, so the 0 -> ~0ul transition is dangerous - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Change-Id: I8c53bcc4c70ed978e6cf81a6f38fb06a59cc64ce
I've seen a fair number of issues with kswapd and other processes appearing to get stuck in v3.12-rc. Using sysrq-p many times seems to indicate that it gets stuck somewhere in list_lru_walk_node(), called from prune_icache_sb() and super_cache_scan(). I never seem to be able to trigger a calltrace for functions above that point. So I decided to add the following to super_cache_scan(): @@ -81,10 +81,14 @@ static unsigned long super_cache_scan(struct shrinker *shrink, inodes = list_lru_count_node(&sb->s_inode_lru, sc->nid); dentries = list_lru_count_node(&sb->s_dentry_lru, sc->nid); total_objects = dentries + inodes + fs_objects + 1; +printk("%s:%u: %s: dentries %lu inodes %lu total %lu\n", current->comm, current->pid, __func__, dentries, inodes, total_objects); /* proportion the scan between the caches */ dentries = mult_frac(sc->nr_to_scan, dentries, total_objects); inodes = mult_frac(sc->nr_to_scan, inodes, total_objects); +printk("%s:%u: %s: dentries %lu inodes %lu\n", current->comm, current->pid, __func__, dentries, inodes); +BUG_ON(dentries == 0); +BUG_ON(inodes == 0); /* * prune the dcache first as the icache is pinned by it, then @@ -99,7 +103,7 @@ static unsigned long super_cache_scan(struct shrinker *shrink, freed += sb->s_op->free_cached_objects(sb, fs_objects, sc->nid); } - +printk("%s:%u: %s: dentries %lu inodes %lu freed %lu\n", current->comm, current->pid, __func__, dentries, inodes, freed); drop_super(sb); return freed; } and shortly thereafter, having applied some pressure, I got this: update-apt-xapi:1616: super_cache_scan: dentries 25632 inodes 2 total 25635 update-apt-xapi:1616: super_cache_scan: dentries 1023 inodes 0 ------------[ cut here ]------------ Kernel BUG at c0101994 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#3] SMP ARM Modules linked in: fuse rfcomm bnep bluetooth hid_cypress CPU: 0 PID: 1616 Comm: update-apt-xapi Tainted: G D 3.12.0-rc7+ #154 task: daea1200 ti: c3bf8000 task.ti: c3bf8000 PC is at super_cache_scan+0x1c0/0x278 LR is at trace_hardirqs_on+0x14/0x18 Process update-apt-xapi (pid: 1616, stack limit = 0xc3bf8240) ... Backtrace: (super_cache_scan) from [<c00cd69c>] (shrink_slab+0x254/0x4c8) (shrink_slab) from [<c00d09a0>] (try_to_free_pages+0x3a0/0x5e0) (try_to_free_pages) from [<c00c59cc>] (__alloc_pages_nodemask+0x5) (__alloc_pages_nodemask) from [<c00e07c0>] (__pte_alloc+0x2c/0x13) (__pte_alloc) from [<c00e3a70>] (handle_mm_fault+0x84c/0x914) (handle_mm_fault) from [<c001a4cc>] (do_page_fault+0x1f0/0x3bc) (do_page_fault) from [<c001a7b0>] (do_translation_fault+0xac/0xb8) (do_translation_fault) from [<c000840c>] (do_DataAbort+0x38/0xa0) (do_DataAbort) from [<c00133f8>] (__dabt_usr+0x38/0x40) Notice that we had a very low number of inodes, which were reduced to zero my mult_frac(). Now, prune_icache_sb() calls list_lru_walk_node() passing that number of inodes (0) into that as the number of objects to scan: long prune_icache_sb(struct super_block *sb, unsigned long nr_to_scan, int nid) { LIST_HEAD(freeable); long freed; freed = list_lru_walk_node(&sb->s_inode_lru, nid, inode_lru_isolate, &freeable, &nr_to_scan); which does: unsigned long list_lru_walk_node(struct list_lru *lru, int nid, list_lru_walk_cb isolate, void *cb_arg, unsigned long *nr_to_walk) { struct list_lru_node *nlru = &lru->node[nid]; struct list_head *item, *n; unsigned long isolated = 0; spin_lock(&nlru->lock); restart: list_for_each_safe(item, n, &nlru->list) { enum lru_status ret; /* * decrement nr_to_walk first so that we don't livelock if we * get stuck on large numbesr of LRU_RETRY items */ if (--(*nr_to_walk) == 0) break; So, if *nr_to_walk was zero when this function was entered, that means we're wanting to operate on (~0UL)+1 objects - which might as well be infinite. Clearly this is not correct behaviour. If we think about the behaviour of this function when *nr_to_walk is 1, then clearly it's wrong - we decrement first and then test for zero - which results in us doing nothing at all. A post-decrement would give the desired behaviour - we'd try to walk one object and one object only if *nr_to_walk were one. It also gives the correct behaviour for zero - we exit at this point. Fixes: 5cedf72 ("list_lru: fix broken LRU_RETRY behaviour") Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Dave Chinner <dchinner@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> [ Modified to make sure we never underflow the count: this function gets called in a loop, so the 0 -> ~0ul transition is dangerous - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Change-Id: I8c53bcc4c70ed978e6cf81a6f38fb06a59cc64ce
First of all, thanks for the work you've been doing on this kernel!
Let me know if you prefer to receive patch submissions via another medium than GitHub.
Unofficial LineageOS 16.0 builds for Google's Nexus 7 (2013), such as https://lineageos.wickenberg.nu/deb, include a kernel built from this branch (thanks to XDA Developers user
pitrus-
).Unfortunately, a variety of popular apps - such as Firefox Mobile (mozilla-mobile/fenix#5663 (comment)) - have been causing OS crashes on this release for quite a while due to a critical patch that wasn't backported to
android_kernel_google_msm
for Pie.Ref. https://gitlab.com/LineageOS/issues/android/issues/492
The commit in this pull request is a 100% unmodified backport of LineageOS/android_kernel_cyanogen_msm8974@f44b4b1 (which was itself later backported to
android_kernel_google_msm
in v18.1 via LineageOS@e4cede1).