Connecting to: /dev/ttyACM0 Changing monitoring state from 'Offline' to 'Opening serial port' Connected to: Serial(port='/dev/ttyACM0', baudrate=250000, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor Changing monitoring state from 'Opening serial port' to 'Connecting' Send: N0 M110 N0*125 Recv: start Send: N0 M110 N0*125 Recv: echo:Marlin 1.1.0-RC7 Recv: echo: Last Updated: 2016-07-26 12:00 | Author: (none, default config) Recv: Compiled: Jul 27 2016 Recv: echo: Free Memory: 3049 PlannerBufferBytes: 1232 Recv: echo:Hardcoded Default Settings Loaded Recv: echo:Steps per unit: Recv: echo: M92 X80.00 Y80.00 Z800.00 E95.00 Recv: echo:Maximum feedrates (mm/s): Recv: echo: M203 X300.00 Y300.00 Z5.00 E25.00 Recv: echo:Maximum Acceleration (mm/s2): Recv: echo: M201 X3000 Y3000 Z100 E10000 Recv: echo:Accelerations: P=printing, R=retract and T=travel Recv: echo: M204 P800.00 R3000.00 T3000.00 Recv: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s) Recv: echo: M205 S0.00 T0.00 B20000 X8.00 Z0.40 E5.00 Recv: echo:Home offset (mm) Recv: echo: M206 X0.00 Y0.00 Z0.00 Recv: echo:Material heatup parameters: Recv: echo: M145 S0 H210 B60 F0 Recv: echo: M145 S1 H240 B100 F0 Recv: echo:PID settings: Recv: echo: M301 P22.20 I1.08 D114.00 C100.00 L20 Recv: echo:Retract: S=Length (mm) F:Speed (mm/m) Z: ZLift (mm) Recv: echo: M207 S1.00 F2700.00 Z0.00 Recv: echo:Recover: S=Extra length (mm) F:Speed (mm/m) Recv: echo: M208 S0.00 F2700.00 Recv: echo:Auto-Retract: S=0 to disable, 1 to interpret extrude-only moves as retracts or recoveries Recv: echo: M209 S0 Recv: echo:Filament settings: Disabled Recv: echo: M200 D3.00 Recv: echo: M200 D0 Recv: echo:SD init fail Recv: ok Changing monitoring state from 'Connecting' to 'Operational' Send: N0 M110 N0*125 Recv: echo:SD init fail Recv: echo:Unknown command: "" Recv: ok Send: M21 Recv: echo:SD init fail Recv: ok Send: M20 Recv: Begin file list Recv: End file list Recv: ok Send: M115 Recv: FIRMWARE_NAME:Marlin 1.1.0-RC7 (Github) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:3D Printer EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff Recv: ok Send: M105 Recv: ok T:25.4 /0.0 B:35.2 /0.0 B@:0 @:0 Send: M105 Recv: ok T:25.3 /0.0 B:35.0 /0.0 B@:0 @:0 Changing monitoring state from 'Operational' to 'Printing' Send: N0 M110 N0*125 Recv: ok Send: N1 M190 S60.000000*113 Changing monitoring state from 'Printing' to 'Operational' Changing monitoring state from 'Operational' to 'Offline' Connection closed, closing down monitor Connecting to: /dev/ttyACM0 Changing monitoring state from 'Offline' to 'Opening serial port' Connected to: Serial(port='/dev/ttyACM0', baudrate=250000, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor Changing monitoring state from 'Opening serial port' to 'Connecting' Send: N0 M110 N0*125 Recv: start Recv: echo:Marlin 1.1.0-RC7 Send: N0 M110 N0*125 Recv: echo: Last Updated: 2016-07-26 12:00 | Author: (none, default config) Recv: Compiled: Jul 27 2016 Recv: echo: Free Memory: 3049 PlannerBufferBytes: 1232 Recv: echo:Hardcoded Default Settings Loaded Recv: echo:Steps per unit: Recv: echo: M92 X80.00 Y80.00 Z800.00 E95.00 Recv: echo:Maximum feedrates (mm/s): Recv: echo: M203 X300.00 Y300.00 Z5.00 E25.00 Recv: echo:Maximum Acceleration (mm/s2): Recv: echo: M201 X3000 Y3000 Z100 E10000 Recv: echo:Accelerations: P=printing, R=retract and T=travel Recv: echo: M204 P800.00 R3000.00 T3000.00 Recv: echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s) Recv: echo: M205 S0.00 T0.00 B20000 X8.00 Z0.40 E5.00 Recv: echo:Home offset (mm) Recv: echo: M206 X0.00 Y0.00 Z0.00 Recv: echo:Material heatup parameters: Recv: echo: M145 S0 H210 B60 F0 Recv: echo: M145 S1 H240 B100 F0 Recv: echo:PID settings: Recv: echo: M301 P22.20 I1.08 D114.00 C100.00 L20 Recv: echo:Retract: S=Length (mm) F:Speed (mm/m) Z: ZLift (mm) Recv: echo: M207 S1.00 F2700.00 Z0.00 Recv: echo:Recover: S=Extra length (mm) F:Speed (mm/m) Recv: echo: M208 S0.00 F2700.00 Recv: echo:Auto-Retract: S=0 to disable, 1 to interpret extrude-only moves as retracts or recoveries Recv: echo: M209 S0 Recv: echo:Filament settings: Disabled Recv: echo: M200 D3.00 Recv: echo: M200 D0 Recv: echo:SD init fail Recv: ok Changing monitoring state from 'Connecting' to 'Operational' Send: N0 M110 N0*125 Recv: echo:SD init fail Recv: echo:Unknown command: "" Recv: ok Send: M21 Recv: echo:SD init fail Recv: ok Send: M20 Recv: Begin file list Recv: End file list Recv: ok Send: M115 Recv: FIRMWARE_NAME:Marlin 1.1.0-RC7 (Github) SOURCE_CODE_URL:https://github.com/MarlinFirmware/Marlin PROTOCOL_VERSION:1.0 MACHINE_TYPE:3D Printer EXTRUDER_COUNT:1 UUID:cede2a2f-41a2-4748-9b12-c55c62f367ff Recv: ok Send: M105 Recv: ok T:25.0 /0.0 B:33.9 /0.0 B@:0 @:0 Send: M105 Recv: ok T:25.0 /0.0 B:33.9 /0.0 B@:0 @:0 Send: M105 Recv: ok T:25.0 /0.0 B:33.9 /0.0 B@:0 @:0 Changing monitoring state from 'Operational' to 'Printing' Send: N0 M110 N0*125 Recv: ok Send: N1 M190 S60.000000*113 Recv: 25.0 /0.0 B:33.9 /60.0 B@:0 @:0 W:? Recv: T:25.0 /0.0 B:33.9 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:33.9 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:34.2 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:34.2 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:34.6 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:34.7 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:35.0 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:35.3 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:35.5 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:35.7 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:36.1 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:36.4 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:36.8 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:37.0 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:37.2 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:37.5 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:37.9 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:38.3 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:38.6 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:39.0 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:39.3 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:39.4 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:39.8 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:40.0 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:40.3 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:40.5 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:40.8 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:41.1 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:41.4 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:41.7 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:42.0 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:42.3 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:42.6 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:42.9 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:43.2 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:43.5 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:43.8 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:44.1 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:44.4 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:44.5 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:44.8 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:45.0 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:45.3 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:45.6 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:45.9 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:46.2 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:46.5 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:46.8 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:47.1 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:47.4 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:47.7 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:47.9 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:48.0 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:48.3 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:48.6 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:48.9 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:49.2 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:49.5 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:49.8 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:50.1 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:50.2 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:50.4 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:50.7 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:51.0 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:51.2 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:51.4 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:51.5 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:51.6 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:51.8 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:52.0 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:52.2 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:52.4 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:52.6 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:52.7 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:52.8 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:53.0 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:53.2 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:53.4 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:53.6 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:53.7 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:53.9 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:54.0 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:54.2 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:54.4 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:54.6 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:54.7 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:54.8 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:55.0 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:55.2 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:55.4 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:55.5 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:55.6 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:55.8 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:56.0 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:56.2 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:56.4 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:56.6 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:56.6 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:56.8 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:57.0 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:57.2 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:57.4 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:57.5 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:57.7 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:57.8 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:58.0 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:58.2 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:58.4 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:58.4 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:58.6 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:58.8 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:59.0 /60.0 B@:127 @:0 W:? Recv: T:25.0 /0.0 B:59.1 /60.0 B@:127 @:0 W:9 Recv: T:25.0 /0.0 B:59.2 /60.0 B@:127 @:0 W:8 Recv: T:25.0 /0.0 B:59.4 /60.0 B@:127 @:0 W:7 Recv: T:25.0 /0.0 B:59.6 /60.0 B@:127 @:0 W:6 Recv: T:25.0 /0.0 B:59.8 /60.0 B@:127 @:0 W:5 Recv: T:25.0 /0.0 B:60.0 /60.0 B@:127 @:0 W:4 Recv: T:25.0 /0.0 B:60.0 /60.0 B@:127 @:0 W:3 Recv: T:25.0 /0.0 B:60.2 /60.0 B@:127 @:0 W:2 Recv: T:25.0 /0.0 B:60.4 /60.0 B@:127 @:0 W:1 Recv: T:25.0 /0.0 B:60.6 /60.0 B@:127 @:0 W:0 Recv: ok Send: N2 M109 S210.000000*71 No response from printer after 6 consecutive communication timeouts, considering it dead. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves. Changing monitoring state from 'Printing' to 'Offline: Too many consecutive timeouts, printer still connected and alive?' Connection closed, closing down monitor