diff --git a/README-python-library.md b/README-python-library.md
new file mode 100644
index 00000000..5ecad345
--- /dev/null
+++ b/README-python-library.md
@@ -0,0 +1,251 @@
+/* Documentation of back-end functions used in PSLab, taken from sciencelab.py */
+
+def get_resistance(self):
+
+def __ignoreCalibration__(self):
+
+def __print__(self, *args):
+
+def __del__(self):
+
+def get__version(self):
+
+def getRadioLinks(self):
+
+def newRadioLink(self, **args):
+
+def reconnect(self, **kwargs):
+
+def capture1(self, ch, ns, tg, *args, **kwargs):
+
+def capture2(self, ns, tg, TraceOneRemap='CH1'):
+
+def capture4(self, ns, tg, TraceOneRemap='CH1'):
+
+def capture_multiple(self, samples, tg, *args):
+
+def __capture_fullspeed__(self, chan, samples, tg, *args, **kwargs):
+
+def capture_fullspeed(self, chan, samples, tg, *args, **kwargs):
+
+def __capture_fullspeed_hr__(self, chan, samples, tg, *args):
+
+def capture_fullspeed_hr(self, chan, samples, tg, *args):
+
+def __retrieveBufferData__(self, chan, samples, tg):
+
+def capture_traces(self, num, samples, tg, channel_one_input='CH1', CH123SA=0, *kwargs):
+
+def capture_highres_traces(self, channel, samples, tg, **kwargs):
+
+def fetch_trace(self, channel_number):
+
+def oscilloscope_progress(self):
+
+def __fetch_channel__(self, channel_number):
+
+def __fetch_channel_oneshot__(self, channel_number):
+
+def configure_trigger(self, chan, name, voltage, resolution=10, **kwargs):
+
+def set_gain(self, channel, gain, Force=False):
+
+def select_range(self, channel, voltage_range):
+
+def __calcCHOSA__(self, name):
+
+def get_voltage(self, channel_name, **kwargs):
+
+def voltmeter_autorange(self, channel_name):
+
+def __autoSelectRange__(self, channel_name, V):
+
+def __autoRangeScope__(self, tg):
+
+def get_average_voltage(self, channel_name, **kwargs):
+
+def __get_raw_average_voltage__(self, channel_name, **kwargs):
+
+def fetch_buffer(self, starting_position=0, total_points=100):
+
+def clear_buffer(self, starting_position, total_points):
+
+def fill(slef, starting_position, poin_array):
+
+def start_streaming(self, tg, channel='CH1'):
+
+def stop_streaming(self):
+
+def __calcDChan__(self, name):
+
+def __get_high_freq__backup__(self, pin):
+
+def get_high_freq(self, pin):
+
+def get_freq(self, channel='CNTR', timeout=2):
+
+def r2r_time(self, channel, skip_cycle=0, timeout=5):
+
+def f2f_time(self,channel, skip_cycle=0, timeout=5):
+
+def MeasureInterval(self, channel1, channel2, edge1, edge2, timeout=0.1):
+
+def DutyCycle(self, channel='ID1', timeout=1.):
+
+def PulseTime(self, channel='ID1', PulseType='LOW', timeout=0.1):
+
+def MeasureMultipleDigitalEdges(self, channel1, channel2, edgeType1, edgeType2, points1, points2, timeout=0.1, **kwargs):
+
+def capture_edges1(self, waiting_time=1., **args):
+
+def start_one_channel_LA_backup__(self, trigger=1, channel='ID1', maximum_time=67, **args):
+
+def start_one_channel_LA(self, **args):
+
+def start_two_channel_LA(self, **args):
+
+def start_three_channel_LA(self, **args):
+
+def start_four_channel_LA(self, trigger=1, maximum_time=0.001, mode=[1, 1, 1, 1], **args):
+
+def get_LA_initial_states(self):
+
+def stop_LA(self):
+
+def fetch_int_data_from_LA(self, bytes, chan=1):
+
+def fetch_LA_channels(self):
+
+def __fetch_LA_channel__(self, channel_number, initial_states):
+
+def get_states(self):
+
+def get_state(self, input_id):
+
+def set_state(self, **kwargs):
+
+def countPulses(self, channel='SEN'):
+
+def readPulseCount(self):
+
+def __charge_cap__(self, state, t):
+
+def __capture_capacitance__(self, samples, tg):
+
+def capacitance_via_RC_discharge(self):
+
+def __get_capacitor_range__(self, ctime):
+
+def get_capacitor_range(self):
+
+def get_capacitance(self):
+
+def __calibrate_ctmu__(self, scalers):
+
+def __get_capacitance__(self, current_range, trim, Charge_Time):
+
+def get_temperature(self):
+
+def __start_ctmu__(self, Crange, trim, tgen=1):
+
+def __stop_ctmu__(self):
+
+def resetHardware(self):
+
+def read_flash(self, page, location):
+
+def __stoa__(self, s):
+
+def __atos__(self, a):
+
+def read_bulk_flash(self, page, numbytes):
+
+def write_flash(self, page, location, string_to_write):
+
+def write_bulk_flash(self, location, data):
+
+def set_wave(self, chan, freq):
+
+def set_sine1(self, freq):
+
+def set_sine2(self, freq):
+
+def set_w1(self, freq, waveType=None):
+
+def set_w2(self, freq, waveType=None):
+
+def readbackWavefrom(self, chan):
+
+def set_waves(self, freq, phase, f2=None):
+
+def load_equation(self, chan, function, span=None, **kwargs):
+
+def load_table(self, chan, points, mode='arbit', **kwargs):
+
+def sqr1(self, freq, duty_cycle=50, onlyPrepare=False):
+
+def sqr1_pattern(self, timing_array):
+
+def sqr2(self, freq, duty_cycle):
+
+def set_sqrs(self, wavelength, phase, high_time1, high_time2, prescaler=1):
+
+def sqrPWM(self, freq, h0, p1, h1, p2, h2, p3, h3, **kwargs):
+
+def map_reference_clock(self, scaler, *args):
+
+def set_pv1(self, val):
+ 
+def set_pv2(self, val):
+
+def set_pv3(self, val):
+
+def set_pcs(self, val):
+
+def get_pv1(self):
+
+def get_pv2(self):
+
+ def get_pv3(self):
+ 
+ def get_pcs(self):
+ 
+ def WS2812B(self, cols, output='CS1'):
+ 
+ def read_program_address(self, address):
+ 
+ def device_id(self):
+ 
+ def __write_program_address__(self, address, value):
+ 
+ def read_data_address(self, address):
+ 
+ def __write_data_address__(self, address, value):
+ 
+ def __stepperMotor__(self, steps, delay, direction):
+ 
+ def stepForward(self, steps, delay):
+ 
+ def stepBackward(self, steps, delay):
+ 
+ def servo(self, angle, chan='SQR1'):
+ 
+ def servo4(self, a1, a2, a3, a4):
+ 
+ def enableUartPassthrough(self, baudrate, persist=False):
+ 
+ def estimateDistance(self):
+ 
+ def opticalArray(self, SS, delay, channel='CH3', **kwargs):
+ 
+ def setUARTBAUD(self, BAUD):
+ 
+ def writeUART(self, character):
+ 
+ def readUART(self):
+ 
+ def readUARTStatus(self):
+ 
+ def readLog(self):
+ 
+ def raiseException(self, ex, msg):