Skip to content

Boron (Soil)

Saurabh Levin edited this page Jan 13, 2020 · 3 revisions

Things You Will Need

  1. 1 Bottle of Boron Reagent A

  2. 1 Bottle of Boron Reagent B

  3. A smartphone with the ffem Collect and ffem Soil apps installed, and an alignment sticker around the camera

  4. A Cuvette and pipe

  5. A 10 ml measuring tube

  6. Tissue Paper

  7. A sample of soil extract to test


Steps

Note: Before testing, you must have a solution of soil extract. refer to the link for instructions on how to prepare it.

  1. Open the ffem Collect app, and select "Fill Blank Form". Select the form you need to fill out.
                    
  1. Answer all the questions in the form, swiping left to go to the next questions. When you reach the soil quality questions, launch the test for Available Boron
                    
  1. Rinse the empty cuvette and measuring tube twice with the sample to remove any traces of previous solutions.


  1. Take 5ml of of the extracted soil sample, and add it to the measuring tube.


  1. Add 2 ml of Reagent A and 4 ml of Reagent B to the measuring tube. Close the lid and shake the tube to help the reaction.
                
  1. Pour the solution from the mixing tube into the provided cuvette. Close the lid and fit the cuvette into the pipe.

                                        

  1. Launch the test on the app selecting "No Dilution" on the next screen.
                    
  1. Place the phone face down, and use the sticker to help center the cuvette over the camera. Wait for about 10 minutes for the test to complete - you will hear 6 beeps and a "Test Completion" sound.
                                        
  1. You should receive a contaminant concentration value in mg/L. Tap Accept Result to return to the survey.
                   
  1. Empty the contents of the cuvette and rinse it once.
  1. Complete the rest of the survey, and submit it once you have filled in all the forms.
You can’t perform that action at this time.