Skip to content


Saurabh Levin edited this page Nov 21, 2018 · 14 revisions

Things You Will Need

1 tablet each of Nitrate Reagent A and B

  1. A smartphone with the ffem Collect and ffem Water apps installed, and an alignment sticker around the camera

  2. A Cuvette and pipe

  3. A 10 ml measuring tube

  4. Tissue Paper

  5. A sample of water to test


  1. Open the ffem Collect app, and select "Fill Blank Form". Select the form you need to fill out.
  2. Answer all the questions in the form, swiping left to go to the next questions. When you reach the water quality questions, launch the test for Nitrate
  3. Rinse the empty cuvette and measuring tube twice with the sample to remove any traces of previous solutions.

  4. Measure 10 ml of the sample with the measuring tube.

  5. Add one tablet each of reagent A and B into the measuring tube. Close the lid and shake it to ensure proper mixing of the reagent and sample.
6. Pour the contents of the mixing tube into the provided cuvette. Close the lid and fit the cuvette into the pipe.
  1. Launch the test on the app selecting "No Dilution" on the next screen.
  2. Place the phone face down, and use the sticker to help center the cuvette over the camera. Wait for 6 minutes for the test to complete - you will hear 6 beeps and a "Test Completion" sound.
9. You should receive a contaminant concentration value in ppm. Tap Accept Result to return to the survey.
  1. Empty the contents of the cuvette and rinse it once.
  1. Complete the rest of the survey, and submit it once you have filled in all the forms.

Dilution Ranges

Validation Testing

You can’t perform that action at this time.