Skip to content
Permalink
Fetching contributors…
Cannot retrieve contributors at this time
82 lines (74 sloc) 2.15 KB
/include/ "system-conf.dtsi"
/include/ "openamp-overlay.dtsi"
/ {
mdio {
compatible = "cdns,macb-mdio";
reg = <0x0 0xff0b0000 0x0 0x1000>;
clocks = <&clk 31>, <&clk 49>, <&clk 45>;
clock-names = "pclk", "hclk", "tx_clk";
#address-cells = <1>;
#size-cells = <0>;
phy0: phy@1 {
device_type = "ethernet-phy";
reg = <0x1>;
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
ti,fifo-depth = <0x1>;
};
phy1: phy@3 {
device_type = "ethernet-phy";
reg = <0x3>;
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
ti,fifo-depth = <0x1>;
};
phy2: phy@12 {
device_type = "ethernet-phy";
reg = <0xc>;
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
ti,fifo-depth = <0x1>;
};
phy3: phy@15 {
device_type = "ethernet-phy";
reg = <0xf>;
ti,rx-internal-delay = <0x8>;
ti,tx-internal-delay = <0xa>;
ti,fifo-depth = <0x1>;
ti,dp83867-sgmii-autoneg-dis;
ti,dp83867-sgmii-clk-en;
};
};
};
&gem0 {
local-mac-address = [00 0a 35 00 01 22];
phy-handle = <&phy0>;
phy-mode = "gmii";
status = "okay";
phy-reset-gpio = <&gpio 416 1>;
phy-reset-active-low;
};
&gem1 {
local-mac-address = [00 0a 35 00 01 23];
phy-handle = <&phy1>;
phy-mode = "gmii";
status = "okay";
phy-reset-gpio = <&gpio 417 1>;
phy-reset-active-low;
};
&gem2 {
local-mac-address = [00 0a 35 00 01 24];
phy-handle = <&phy2>;
phy-mode = "gmii";
status = "okay";
phy-reset-gpio = <&gpio 418 1>;
phy-reset-active-low;
};
&gem3 {
local-mac-address = [00 0a 35 00 01 25];
phy-handle = <&phy3>;
phy-mode = "gmii";
status = "okay";
phy-reset-gpio = <&gpio 419 1>;
phy-reset-active-low;
};
You can’t perform that action at this time.