- Code: Robot | UI | Image Processing | Oculus Rift
- Factsheet: Google Doc
This code was used to control Team 1418's robot in 2015.
They had a great performance at George Mason University at the Greater DC Regional, finishing as the #2 seed, and led the #2 alliance to the semifinals with teams 1885 and 686. They were awarded the Innovation in Control award for a variety of reasons, including their simple but effective sensor package, multiple autonomous modes and useful touchscreen driver station interface.
- Full pyfrc integration for testing & robot simulation
- Unit tests over the robot code with 70% code coverage
- Complex autonomous mode support
- Multiple working autonomous modes used in competition
- Three Tote Strafe - Picks up three totes and makes a Tote Stack worth 20 points
- Can Pickup - Picks up a single can and puts it in the auto zone
- Tote Pickup - Picks up a single tote and puts it in the auto zone
- Tote Pickup II - Pick up two totes from the landfill, and move back into the auto zone
- Drive Forward - Drives the robot into the auto zone
- Automatic support for tuning the autonomous mode parameters via the UI
- Multiple working autonomous modes used in competition
- Two forklifts, one for cans and one for totes
- Encoder-based PID control allows operator to pick up and deposit totes/cans quickly and accurately
- Fully controllable via NetworkTables
- Mecanum drive
The robot code is written in Python, and so to run it you must install RobotPy onto the robot. Refer to the instructions accompanying RobotPy for more information.
With the pyfrc library installed, you can deploy the code onto the robot by running robot.py with the following arguments:
python3 robot.py deploy
This will run the unit tests and upload the code to the robot of your choice.
The robot code has full integration with pyfrc. Make sure you have pyfrc installed, and then you can use the various simulation/testing options of the code by running robot.py directly.
python3 robot.py sim
.
You are here.
robot/
robot/
The robot code lives here
tests/
py.test-based unit tests that test the code and can be run via pyfrc
electrical_test/
Barebones code ran to make sure all of the electronics are working
tests/
Basic testing code to make sure we don't have syntax errors
CrioTests/
Code for testing sensors on the Crio
practice_robot/
Barebones code for testing drive trains on the practice robot.
Students:
- Tim Winters
- Matt Puentes
- Katherine Reinke
- Rachel Baek
Dustin Spicuzza, mentor