Skip to content
Commits on May 31, 2016
Commits on Feb 12, 2016
  1. Removed commented out code

    Removed printf code
    committed Feb 13, 2016
Commits on Feb 8, 2016
  1. - Fixed race condition in sensniff example

    Akiba committed Feb 8, 2016
  2. Changed default speed to 57600

    Compatible across all boards
    committed Feb 8, 2016
  3. Fixed bug in sensniff example

    Akiba committed Feb 8, 2016
  4. Added chibiGetChannel() command so that sensniff-freaklabs can displa…

    …y proper channel
    Akiba committed Feb 8, 2016
Commits on Jan 26, 2016
Commits on Jan 22, 2016
  1. Added function to calculate remaining space in rx buffer

    Used for checking when buffer is full in main sketch
    akiba committed Jan 22, 2016
Commits on Jan 5, 2016
  1. Updated documentation & user config file

    Added new init modes to documentation
    Changed init mode on 2.4 GHz to 802.15.4 compliant
    committed Jan 5, 2016
Commits on Jan 4, 2016
  1. Preparation for release

    * Fixed bug where re-init of chibi stack doesn't initialize previous
    sequence and previous source address. This led to some strange bugs
    where packets would get flagged as duplicate packets and dropped.
    * Added support for ATMega1284P in promiscuous mode using very large
    receive buffer sizes. This is possible because the ATMega1284P has 16 kB
    RAM as opposed to the ATMega328P with 2 kB RAM.
    * Added support for Freaklabs FreakUSB, Arashi, and Saboten product
    lines. These will be introduced shortly.
    * Added support for OQPSK 1000 kb/s, 500 kb/s, and BPSK 20 kb/s data
    rates as well as the standard 250 kb/s for the 900 MHz boards
    * Added support for OQPSK 2000 kb/s, 1000 kb/s, and 500 kb/s as well as
    standard 250 kb/s for the 2.4 GHz boards
    committed Jan 4, 2016
Commits on Dec 31, 2015
  1. Fixed typo

    committed Dec 31, 2015
  2. Modified Saboten settings in UsrCfg.h file

    Wrong settings for Saboten in the user config file
    committed Dec 31, 2015
Commits on Dec 30, 2015
  1. Board updates to support new boards

    * Mainly modding software to support new boards
    * Adding conditional compiles based on board
    committed Dec 30, 2015
Commits on May 4, 2014
Commits on Oct 25, 2013
  1. - Updated keywords.txt file

    - Added support for Saboten v1.1 at 900 MHz
    - Added feature to turn off amps for sleep mode on long range board
    unknown committed Oct 25, 2013
Commits on Oct 6, 2013
  1. - Updated the HOWTO chibiArduino Usage document

    - Added a check to chb_set_mode function to only allow it to be used for 900 MHz radios
    unknown committed Oct 6, 2013
  2. - Added tx power register settings in comments

    unknown committed Oct 6, 2013
  3. - Removed AES example for now.

    unknown committed Oct 6, 2013
  4. - Added checks on the examples to make sure that duplicate packets ar…

    …e discarded.
    unknown committed Oct 6, 2013
Commits on Sep 30, 2013
  1. - Changed default initial values for long range board to tune it acro…

    …ss different channels and modes
    unknown committed Sep 30, 2013
Commits on Sep 25, 2013
  1. - Bugfix: Removed CHIBI_ENTER_CRIT and CHIBI_LEAVE_CRIT statements fr…

    …om ISR
    - Bugfix: Tx power not set to full power in init code
    - Bugfix: Added code to change Tx power to 5 dBm for long range board. This is max spec'd by CC1190 datasheet.
    unknown committed Sep 25, 2013
Commits on Jul 29, 2013
  1. Create

    committed Jul 29, 2013
  2. - Feature: Added support for long range boards. Autodetect long range…

    … boards and initializes front end RF module and high gain mode pin
    - Bug Fix: Fixed race condition in chb_tx where it's put into tx mode while receiving a packet. fix was to wait until radio state machine fully made transition to tx mode.
    unknown committed Jul 29, 2013
Commits on Jul 23, 2013
  1. - Fixed race condition in unicast transmit.

    - When changing radio state machine, need to first look at current state and then verify the change to the correct state was fully executed.
    unknown committed Jul 23, 2013
Commits on Jul 10, 2013
  1. - Previous bug fix had unintended consequence. Reinstating previous s…

    …tatement to manually switch back to RX mode.
    unknown committed Jul 10, 2013
Commits on Jul 9, 2013
  1. - Fixed bug that causes hang during transmission. No need to wait for…

    … radio to go into RX_STATE. It will do that automagically.
    committed Jul 9, 2013
Commits on Jul 3, 2013
  1. - Fixed race condition bug: When transmitting, irq issued after trans…

    …mit end. If ISR is not serviced quickly enough, IRQ will be missed and system hangs. This occurs when simultaneously transmitting and receiving and the received frame occurs in a short window between transmission end and the interrupt being serviced.
    - Removed chb_rx_poll.c/h: polling mode will no longer be supported
    - Removed boards.txt: Will post different method of board identification in future
    committed Jul 3, 2013
Commits on Jun 21, 2013
  1. Merge branch 'master' of

    committed Jun 21, 2013
  2. - chibiArduino v1.0

    - added support for AT86RF212 900 MHz chip
    - added support for AT86RF231 2.4 GHz chip
    - added support for AES encryption
    - added support for high data rate modes (2 Mbps at 2.4 GHz, 1 Mbps at 900 MHz)
    - added hardware based true random number generation
    - added precompiler defines based on board definition file for chibiArduino hardware variants
    - added support for different modulation modes at 900 MHz using OQPSK and BPSK
    - added AES example
    - bumped version to 1.0. yee-haw!
    committed Jun 21, 2013
Something went wrong with that request. Please try again.