Copyright 2013 Freetronics Pty Ltd
Freetronics site: www.freetronics.com
Freetronics email: info@freetronics.com
Based on the circuit described in the "RFID Access Control" project in the book "Practical Arduino", this shield allows you to control a door lock using an electric strike plate using a number of commonly available RFID reader modules.
Supported reader modules include:
- ID12
- ID20
- RDM630
- RDM880
- HF MultiTag
Features:
- Reset button wired through to Arduino reset pin.
- Blue "Arduino power on" LED with current-limiting resistor.
- 100nF bypass/smoothing capacitor on supply rails.
- Overlay guide where you need it: both top and bottom.
Compatible with the Freetronics TwentyTen, Arduino Uno, Arduino Duemilanove, and other compatible boards based on the same header format.
More information is available at:
http://www.freetronics.com/dlock http://www.practicalarduino.com/projects/rfid-access-control
The design is saved as an EAGLE project. EAGLE PCB design software is available from www.cadsoftusa.com free for non-commercial use. To use this project download it and place the directory containing these files into the "eagle" directory on your computer. Then open EAGLE and navigate to Projects -> eagle -> DLOCK.
The specific terms of distribution of this project are governed by the license referenced below.
Licensed under the TAPR Open Hardware License (www.tapr.org/OHL). The "license" folder within this repository also contains a copy of this license in plain text format.