Skip to content

Home

Jump to bottom Edit New page
reflextechno edited this page Apr 29, 2018 · 1 revision

/*--------------------------------------------------------------------------------------

dmd_test.cpp Demo and example project for the Freetronics DMD, a 512 LED matrix display panel arranged in a 32 x 16 layout.

Copyright (C) 2011 Marc Alexander (info freetronics com)

See http://www.freetronics.com/dmd for resources and a getting started guide.

Note that the DMD library uses the SPI port for the fastest, low overhead writing to the display. Keep an eye on conflicts if there are any other devices running from the same SPI port, and that the chip select on those devices is correctly set to be inactive when the DMD is being written to.

USAGE NOTES

  • Place the DMD library folder into the "arduino/libraries/" folder of your Arduino installation.
  • Get the TimerOne library from here: http://code.google.com/p/arduino-timerone/downloads/list or download the local copy from the DMD library page (which may be older but was used for this creation) and place the TimerOne library folder into the "arduino/libraries/" folder of your Arduino installation.
  • Restart the IDE.
  • In the Arduino IDE, you can open File > Examples > DMD > dmd_demo, or dmd_clock_readout, and get it running straight away!

  • The DMD comes with a pre-made data cable and DMDCON connector board so you can plug-and-play straight into any regular size Arduino Board (Uno, Freetronics Eleven, EtherTen, USBDroid, etc)

  • Please note that the Mega boards have SPI on different pins, so this library does not currently support the DMDCON connector board for direct connection to Mega's, please jumper the DMDCON pins to the matching SPI pins on the other header on the Mega boards.

This example code is in the public domain. The DMD library is open source (GPL), for more see DMD.cpp and DMD.h

--------------------------------------------------------------------------------------*/

/-------------------------------------------------------------------------------------- Includes --------------------------------------------------------------------------------------/ #include <SPI.h> //SPI.h must be included as DMD is written by SPI (the IDE complains otherwise) #include <DMD.h> // #include <TimerOne.h> // #include "SystemFont5x7.h" #include "Arial_black_16.h"

//Fire up the DMD library as dmd #define DISPLAYS_ACROSS 1 #define DISPLAYS_DOWN 1 DMD dmd(DISPLAYS_ACROSS, DISPLAYS_DOWN);

/-------------------------------------------------------------------------------------- Interrupt handler for Timer1 (TimerOne) driven DMD refresh scanning, this gets called at the period set in Timer1.initialize(); --------------------------------------------------------------------------------------/ void ScanDMD() { dmd.scanDisplayBySPI(); }

/-------------------------------------------------------------------------------------- setup Called by the Arduino architecture before the main loop begins --------------------------------------------------------------------------------------/ void setup(void) {

//initialize TimerOne's interrupt/CPU usage used to scan and refresh the display Timer1.initialize( 5000 ); //period in microseconds to call ScanDMD. Anything longer than 5000 (5ms) and you can see flicker. Timer1.attachInterrupt( ScanDMD ); //attach the Timer1 interrupt to ScanDMD which goes to dmd.scanDisplayBySPI()

//clear/init the DMD pixels held in RAM dmd.clearScreen( true ); //true is normal (all pixels off), false is negative (all pixels on)

}

/-------------------------------------------------------------------------------------- loop Arduino architecture main loop --------------------------------------------------------------------------------------/ void loop(void) { byte b;

// 10 x 14 font clock, including demo of OR and NOR modes for pixels so that the flashing colon can be overlayed dmd.clearScreen( true ); dmd.selectFont(Arial_Black_16); dmd.drawChar( 0, 3, '2', GRAPHICS_NORMAL ); dmd.drawChar( 7, 3, '3', GRAPHICS_NORMAL ); dmd.drawChar( 17, 3, '4', GRAPHICS_NORMAL ); dmd.drawChar( 25, 3, '5', GRAPHICS_NORMAL ); dmd.drawChar( 15, 3, ':', GRAPHICS_OR ); // clock colon overlay on delay( 1000 ); dmd.drawChar( 15, 3, ':', GRAPHICS_NOR ); // clock colon overlay off delay( 1000 ); dmd.drawChar( 15, 3, ':', GRAPHICS_OR ); // clock colon overlay on delay( 1000 ); dmd.drawChar( 15, 3, ':', GRAPHICS_NOR ); // clock colon overlay off delay( 1000 ); dmd.drawChar( 15, 3, ':', GRAPHICS_OR ); // clock colon overlay on delay( 1000 );

dmd.drawMarquee("Scrolling Text",14,(32*DISPLAYS_ACROSS)-1,0); long start=millis(); long timer=start; boolean ret=false; while(!ret){ if ((timer+30) < millis()) { ret=dmd.stepMarquee(-1,0); timer=millis(); } } // half the pixels on dmd.drawTestPattern( PATTERN_ALT_0 ); delay( 1000 );

// the other half on dmd.drawTestPattern( PATTERN_ALT_1 ); delay( 1000 );

// display some text dmd.clearScreen( true ); dmd.selectFont(System5x7); for (byte x=0;x<DISPLAYS_ACROSS;x++) { for (byte y=0;y<DISPLAYS_DOWN;y++) { dmd.drawString( 2+(32x), 1+(16y), "freet", 5, GRAPHICS_NORMAL ); dmd.drawString( 2+(32x), 9+(16y), "ronic", 5, GRAPHICS_NORMAL ); } } delay( 2000 );

// draw a border rectangle around the outside of the display dmd.clearScreen( true ); dmd.drawBox( 0, 0, (32DISPLAYS_ACROSS)-1, (16DISPLAYS_DOWN)-1, GRAPHICS_NORMAL ); delay( 1000 );

for (byte y=0;y<DISPLAYS_DOWN;y++) { for (byte x=0;x<DISPLAYS_ACROSS;x++) { // draw an X int ix=32x; int iy=16y; dmd.drawLine( 0+ix, 0+iy, 11+ix, 15+iy, GRAPHICS_NORMAL ); dmd.drawLine( 0+ix, 15+iy, 11+ix, 0+iy, GRAPHICS_NORMAL ); delay( 1000 );

   // draw a circle
   dmd.drawCircle( 16+ix,  8+iy,  5, GRAPHICS_NORMAL );
   delay( 1000 );

   // draw a filled box
   dmd.drawFilledBox( 24+ix, 3+iy, 29+ix, 13+iy, GRAPHICS_NORMAL );
   delay( 1000 );
 }

}

// stripe chaser for( b = 0 ; b < 20 ; b++ ) { dmd.drawTestPattern( (b&1)+PATTERN_STRIPE_0 ); delay( 200 );
} delay( 200 );

}

Add a custom footer
Add a custom sidebar
Clone this wiki locally