C2600: client wifi does not work properly - mark ipq806x as broken

[Noodlesalat]

Hi,
I have some problems with the client wifi connection on the TP-Link C2600. When I try to connect to the node it disconnects me a few times until the connection is established.

Here is a part of logread while connecting:

Tue Aug  7 23:55:10 2018 daemon.info hostapd: client0: STA MACADDRESS IEEE 802.11: authenticated
Tue Aug  7 23:55:10 2018 daemon.info hostapd: client0: STA MACADDRESS IEEE 802.11: associated (aid 1)
Tue Aug  7 23:55:10 2018 daemon.notice hostapd: client0: AP-STA-CONNECTED MACADDRESS
Tue Aug  7 23:55:12 2018 daemon.notice hostapd: client0: AP-STA-DISCONNECTED MACADDRESS
Tue Aug  7 23:55:12 2018 daemon.info hostapd: client0: STA MACADDRESS IEEE 802.11: disassociated
Tue Aug  7 23:55:13 2018 daemon.info hostapd: client0: STA MACADDRESS IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Tue Aug  7 23:55:20 2018 daemon.info hostapd: client0: STA MACADDRESS IEEE 802.11: authenticated
Tue Aug  7 23:55:20 2018 daemon.info hostapd: client0: STA MACADDRESS IEEE 802.11: associated (aid 1)
Tue Aug  7 23:55:20 2018 daemon.notice hostapd: client0: AP-STA-CONNECTED MACADDRESS
Tue Aug  7 23:55:21 2018 daemon.notice netifd: client (1739): cat: write error: Broken pipe
Tue Aug  7 23:55:22 2018 daemon.notice hostapd: client0: AP-STA-DISCONNECTED MACADDRESS
Tue Aug  7 23:55:22 2018 daemon.info hostapd: client0: STA MACADDRESS IEEE 802.11: disassociated
Tue Aug  7 23:55:23 2018 daemon.info hostapd: client0: STA MACADDRESS IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Tue Aug  7 23:55:25 2018 daemon.info hostapd: client0: STA MACADDRESS IEEE 802.11: authenticated
Tue Aug  7 23:55:25 2018 daemon.info hostapd: client0: STA MACADDRESS IEEE 802.11: associated (aid 1)
Tue Aug  7 23:55:25 2018 daemon.notice hostapd: client0: AP-STA-CONNECTED MACADDRESS
Tue Aug  7 23:55:27 2018 daemon.notice hostapd: client0: AP-STA-DISCONNECTED MACADDRESS
Tue Aug  7 23:55:27 2018 daemon.info hostapd: client0: STA MACADDRESS IEEE 802.11: disassociated
Tue Aug  7 23:55:28 2018 daemon.info hostapd: client0: STA MACADDRESS IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE)
Tue Aug  7 23:55:29 2018 daemon.info hostapd: client0: STA MACADDRESS IEEE 802.11: authenticated
Tue Aug  7 23:55:29 2018 daemon.info hostapd: client0: STA MACADDRESS IEEE 802.11: associated (aid 1)
Tue Aug  7 23:55:29 2018 daemon.notice hostapd: client0: AP-STA-CONNECTED MACADDRESS

I also tested firmware without the ct-packages:

• with the ct-packages the client wifi does not work, but the wifi mesh works great
• without the ct-packages the client wifi works, but the mesh network does not appear

[rotanid]

• which Gluon version (or if it's not a released version: which commit?) are you testing? have you tested latest commits?
• which meshing standard are you using? ibss or 802.11s - and have you tried the other standard?

[Noodlesalat]

which Gluon version (or if it's not a released version: which commit?) are you testing? have you tested latest commits?

d87c4b521b2e891155241c01b98a7ac90a8883b9. I also tried the gluon master branch around yesterday.

which meshing standard are you using? ibss or 802.11s - and have you tried the other standard?

Currently 802.11s and I have not tested ibss.

[rotanid]

actually we're more interested in the case "without the ct-packages the client wifi works, but the mesh network does not appear" as on other devices, the -ct packages are only necessary for ibss meshing.
could you try again with the kmod without ct and the firmware without ct and check if the mesh interface is there on the device itself and post the complete dmesg from the boot process?

[Noodlesalat]

ct

logread

Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.015423] futex hash table entries: 512 (order: 3, 32768 bytes)
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.015536] pinctrl core: initialized pinctrl subsystem
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.016519] NET: Registered protocol family 16
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.016759] DMA: preallocated 256 KiB pool for atomic coherent allocations
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.018096] cpuidle: using governor ladder
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.018161] cpuidle: using governor menu
Thu Apr 12 07:59:18 2018 kern.err kernel: [    0.038818] msm_bus_fabric_init_driver
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.040215] usbcore: registered new interface driver usbfs
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.040303] usbcore: registered new interface driver hub
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.040400] usbcore: registered new device driver usb
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.040456] pps_core: LinuxPPS API ver. 1 registered
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.040468] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.040500] PTP clock support registered
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.042360] clocksource: Switched to clocksource dg_timer
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.045607] NET: Registered protocol family 2
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.046199] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.046241] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.046294] TCP: Hash tables configured (established 4096 bind 4096)
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.046383] UDP hash table entries: 256 (order: 1, 8192 bytes)
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.046409] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.046563] NET: Registered protocol family 1
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.046610] PCI: CLS 0 bytes, default 64
Thu Apr 12 07:59:18 2018 kern.warn kernel: [    0.047725] No memory allocated for crashlog
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.047959] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.053052] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.053069] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.061295] io scheduler noop registered
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.061312] io scheduler deadline registered (default)
Thu Apr 12 07:59:18 2018 kern.warn kernel: [    0.062975] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
Thu Apr 12 07:59:18 2018 kern.warn kernel: [    0.063094] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
Thu Apr 12 07:59:18 2018 kern.warn kernel: [    0.063187] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.064014] OF: PCI: host bridge /soc/pci@1b500000 ranges:
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.064056] OF: PCI:    IO 0x0fe00000..0x0fefffff -> 0x0fe00000
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.064081] OF: PCI:   MEM 0x08000000..0x0fdfffff -> 0x08000000
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.163076] qcom-pcie 1b500000.pci: link up
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.163252] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.163274] pci_bus 0000:00: root bus resource [bus 00-ff]
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.163293] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.163308] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.163324] pci_bus 0000:00: scanning bus
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.163372] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.163469] pci 0000:00:00.0: calling pci_fixup_ide_bases+0x0/0x44
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.163541] pci 0000:00:00.0: supports D1
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.163552] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.163567] pci 0000:00:00.0: PME# disabled
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.163823] pci_bus 0000:00: fixups for bus
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.163847] PCI: bus0: Fast back to back transfers disabled
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.163865] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.163986] pci_bus 0000:01: scanning bus
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.164162] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.164510] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.164979] pci 0000:01:00.0: calling pci_fixup_ide_bases+0x0/0x44
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.165620] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.165660] pci 0000:01:00.0: PME# disabled
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.165995] pci_bus 0000:01: fixups for bus
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.166065] PCI: bus1: Fast back to back transfers disabled
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.166080] pci_bus 0000:01: bus scan returning with max=01
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.166096] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.166114] pci_bus 0000:00: bus scan returning with max=ff
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.166163] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.166187] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.166316] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.166340] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x081fffff]
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.166376] pci 0000:00:00.0: calling qcom_pcie_fixup_final+0x0/0x94
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.166571] pcieport 0000:00:00.0: assign IRQ: got 66
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.166893] pcieport 0000:00:00.0: AER enabled with IRQ 34
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.167013] pci 0000:01:00.0: calling qcom_pcie_fixup_final+0x0/0x94
Thu Apr 12 07:59:18 2018 kern.warn kernel: [    0.167456] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
Thu Apr 12 07:59:18 2018 kern.warn kernel: [    0.167553] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
Thu Apr 12 07:59:18 2018 kern.warn kernel: [    0.167657] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.168458] OF: PCI: host bridge /soc/pci@1b700000 ranges:
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.168493] OF: PCI:    IO 0x31e00000..0x31efffff -> 0x31e00000
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.168516] OF: PCI:   MEM 0x2e000000..0x31dfffff -> 0x2e000000
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.278424] qcom-pcie 1b700000.pci: link up
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.278584] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.278602] pci_bus 0001:00: root bus resource [bus 00-ff]
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.278616] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.278629] pci_bus 0001:00: scanning bus
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.278668] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.278742] pci 0001:00:00.0: calling pci_fixup_ide_bases+0x0/0x44
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.278804] pci 0001:00:00.0: supports D1
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.278814] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.278827] pci 0001:00:00.0: PME# disabled
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.279068] pci_bus 0001:00: fixups for bus
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.279087] PCI: bus0: Fast back to back transfers disabled
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.279105] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.279222] pci_bus 0001:01: scanning bus
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.279409] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.279780] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.280282] pci 0001:01:00.0: calling pci_fixup_ide_bases+0x0/0x44
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.280973] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.281017] pci 0001:01:00.0: PME# disabled
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.281357] pci_bus 0001:01: fixups for bus
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.281433] PCI: bus1: Fast back to back transfers disabled
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.281447] pci_bus 0001:01: bus scan returning with max=01
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.281463] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.281480] pci_bus 0001:00: bus scan returning with max=ff
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.281517] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.281539] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.281671] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.281692] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e1fffff]
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.281725] pci 0001:00:00.0: calling qcom_pcie_fixup_final+0x0/0x94
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.281905] pcieport 0001:00:00.0: assign IRQ: got 99
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.282204] pcieport 0001:00:00.0: AER enabled with IRQ 67
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    0.282317] pci 0001:01:00.0: calling qcom_pcie_fixup_final+0x0/0x94
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.284580] L2 @ QSB rate. Forcing new rate.
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.284795] L2 @ 384000 KHz
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.284963] CPU0 @ 800000 KHz
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.284976] CPU1 @ QSB rate. Forcing new rate.
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.285095] CPU1 @ 384000 KHz
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.289051] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.290452] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.291894] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.294700] msm_serial 16340000.serial: msm_serial: detected port #0
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.294810] msm_serial 16340000.serial: uartclk = 7372800
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.294890] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 100, base_baud = 460800) is a MSM
Thu Apr 12 07:59:18 2018 kern.info kernel: [    0.294925] msm_serial: console setup on port #0
Thu Apr 12 07:59:18 2018 kern.info kernel: [    1.025172] console [ttyMSM0] enabled
Thu Apr 12 07:59:18 2018 kern.info kernel: [    1.029873] msm_serial: driver initialized
Thu Apr 12 07:59:18 2018 kern.info kernel: [    1.038541] loop: module loaded
Thu Apr 12 07:59:18 2018 kern.info kernel: [    1.040038] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
Thu Apr 12 07:59:18 2018 kern.info kernel: [    1.041967] m25p80 spi0.0: mx25u25635f (32768 Kbytes)
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.048134] 25 fixed-partitions partitions found on MTD device spi0.0
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.052893] Creating 25 MTD partitions on "spi0.0":
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.059248] 0x000000000000-0x000000020000 : "SBL1"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.064864] 0x000000020000-0x000000040000 : "MIBIB"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.069519] 0x000000040000-0x000000060000 : "SBL2"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.074388] 0x000000060000-0x000000090000 : "SBL3"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.079148] 0x000000090000-0x0000000a0000 : "DDRCONFIG"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.084029] 0x0000000a0000-0x0000000b0000 : "SSD"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.089052] 0x0000000b0000-0x0000000e0000 : "TZ"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.094013] 0x0000000e0000-0x000000100000 : "RPM"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.098593] 0x000000100000-0x000000170000 : "fs-uboot"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.103282] 0x000000170000-0x0000001b0000 : "uboot-env"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.108226] 0x0000001b0000-0x0000001f0000 : "radio"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.113457] 0x0000001f0000-0x0000005f0000 : "os-image"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.118236] 0x0000005f0000-0x000001ef0000 : "rootfs"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.123495] mtd: device 12 (rootfs) set to be root filesystem
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.128581] 1 squashfs-split partitions found on MTD device rootfs
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.133597] 0x000000980000-0x000001ef0000 : "rootfs_data"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.140816] 0x000001ef0000-0x000001ef0200 : "default-mac"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.146252] 0x000001ef0200-0x000001ef0400 : "pin"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.151488] 0x000001ef0400-0x000001f00000 : "product-info"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.156279] 0x000001f00000-0x000001f10000 : "partition-table"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.161560] 0x000001f10000-0x000001f20000 : "soft-version"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.167499] 0x000001f20000-0x000001f30000 : "support-list"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.172875] 0x000001f30000-0x000001f40000 : "profile"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.178251] 0x000001f40000-0x000001f50000 : "default-config"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.183441] 0x000001f50000-0x000001f90000 : "user-config"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.189088] 0x000001f90000-0x000001fd0000 : "qos-db"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.194516] 0x000001fd0000-0x000001fe0000 : "usb-config"
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    1.199433] 0x000001fe0000-0x000002000000 : "log"
Thu Apr 12 07:59:18 2018 kern.info kernel: [    1.206196] libphy: GPIO Bitbanged MDIO: probed
Thu Apr 12 07:59:18 2018 kern.info kernel: [    1.233220] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.134936] libphy: Fixed MDIO Bus: probed
Thu Apr 12 07:59:18 2018 kern.warn kernel: [    2.137442] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.138390] stmmac - user ID: 0x10, Synopsys ID: 0x37
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.144569] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.149489] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.155647] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.163640] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.171102] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.178242] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.186102] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.191847] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.199320] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
Thu Apr 12 07:59:18 2018 kern.warn kernel: [    2.208630] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.214964] stmmac - user ID: 0x10, Synopsys ID: 0x37
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.220927] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.226063] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.232040] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.240116] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.247654] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.254707] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.262504] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.268418] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.275792] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.283512] i2c /dev entries driver
Thu Apr 12 07:59:18 2018 kern.err kernel: [    2.292285] Calibration not found.
Thu Apr 12 07:59:18 2018 kern.err kernel: [    2.294353] qcom-tsens 900000.thermal-sensor: tsens calibration failed
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.299398] Speed bin: 0
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.304357] PVS bin: 1
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    2.308753] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    2.309215] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.317118] sdhci: Secure Digital Host Controller Interface driver
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.323706] sdhci: Copyright(c) Pierre Ossman
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.329859] sdhci-pltfm: SDHCI platform and OF driver helper
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.336831] NET: Registered protocol family 10
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.342137] Segment Routing with IPv6
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.344512] NET: Registered protocol family 17
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.348080] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.352959] 8021q: 802.1Q VLAN Support v1.8
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    2.365605] Registering SWP/SWPB emulation handler
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.386578] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.400369] s1a: supplied by regulator-dummy
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.400489] s1a: Bringing 0uV into 1050000-1050000uV
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.404224] s1b: supplied by regulator-dummy
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.408735] s1b: Bringing 0uV into 1050000-1050000uV
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.413457] s2a: supplied by regulator-dummy
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.417936] s2a: Bringing 0uV into 800000-800000uV
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.422475] s2b: supplied by regulator-dummy
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.426907] s2b: Bringing 0uV into 800000-800000uV
Thu Apr 12 07:59:18 2018 kern.warn kernel: [    2.432687] thermal thermal_zone0: failed to read out thermal zone (-110)
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.440308] hctosys: unable to open rtc device (rtc0)
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    2.452334] random: fast init done
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.453145] VFS: Mounted root (squashfs filesystem) readonly on device 31:12.
Thu Apr 12 07:59:18 2018 kern.info kernel: [    2.455465] Freeing unused kernel memory: 1024K
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    3.272978] random: crng init done
Thu Apr 12 07:59:18 2018 user.info kernel: [    3.378271] init: Console is alive
Thu Apr 12 07:59:18 2018 user.info kernel: [    3.378480] init: - watchdog -
Thu Apr 12 07:59:18 2018 user.info kernel: [    5.702054] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Apr 12 07:59:18 2018 kern.info kernel: [    5.812046] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Apr 12 07:59:18 2018 kern.notice kernel: [    5.814199] SCSI subsystem initialized
Thu Apr 12 07:59:18 2018 kern.debug kernel: [    5.819989] libata version 3.00 loaded.
Thu Apr 12 07:59:18 2018 kern.info kernel: [    5.823108] ehci-platform: EHCI generic platform driver
Thu Apr 12 07:59:18 2018 kern.info kernel: [    5.825678] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Thu Apr 12 07:59:18 2018 kern.info kernel: [    5.827561] ohci-platform: OHCI generic platform driver
Thu Apr 12 07:59:18 2018 kern.info kernel: [    5.961400] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Thu Apr 12 07:59:18 2018 kern.info kernel: [    5.961495] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Thu Apr 12 07:59:18 2018 kern.info kernel: [    5.966276] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Thu Apr 12 07:59:18 2018 kern.info kernel: [    5.973568] xhci-hcd xhci-hcd.0.auto: irq 106, io mem 0x11000000
Thu Apr 12 07:59:18 2018 kern.info kernel: [    5.982783] hub 1-0:1.0: USB hub found
Thu Apr 12 07:59:18 2018 kern.info kernel: [    5.988377] hub 1-0:1.0: 1 port detected
Thu Apr 12 07:59:18 2018 kern.info kernel: [    5.992037] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Thu Apr 12 07:59:18 2018 kern.info kernel: [    5.995978] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Thu Apr 12 07:59:18 2018 kern.info kernel: [    6.001206] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
Thu Apr 12 07:59:18 2018 kern.info kernel: [    6.008935] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Thu Apr 12 07:59:18 2018 kern.info kernel: [    6.015780] hub 2-0:1.0: USB hub found
Thu Apr 12 07:59:18 2018 kern.info kernel: [    6.023759] hub 2-0:1.0: 1 port detected
Thu Apr 12 07:59:18 2018 kern.info kernel: [    6.027494] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Thu Apr 12 07:59:18 2018 kern.info kernel: [    6.031333] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Thu Apr 12 07:59:18 2018 kern.info kernel: [    6.036814] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Thu Apr 12 07:59:18 2018 kern.info kernel: [    6.044253] xhci-hcd xhci-hcd.1.auto: irq 107, io mem 0x10000000
Thu Apr 12 07:59:18 2018 kern.info kernel: [    6.053299] hub 3-0:1.0: USB hub found
Thu Apr 12 07:59:18 2018 kern.info kernel: [    6.059137] hub 3-0:1.0: 1 port detected
Thu Apr 12 07:59:18 2018 kern.info kernel: [    6.062926] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Thu Apr 12 07:59:18 2018 kern.info kernel: [    6.066744] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Thu Apr 12 07:59:18 2018 kern.info kernel: [    6.072037] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0  SuperSpeed
Thu Apr 12 07:59:18 2018 kern.info kernel: [    6.079761] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Thu Apr 12 07:59:18 2018 kern.info kernel: [    6.086599] hub 4-0:1.0: USB hub found
Thu Apr 12 07:59:18 2018 kern.info kernel: [    6.094649] hub 4-0:1.0: 1 port detected
Thu Apr 12 07:59:18 2018 kern.info kernel: [    6.100713] usbcore: registered new interface driver usb-storage
Thu Apr 12 07:59:18 2018 user.info kernel: [    6.102241] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Apr 12 07:59:18 2018 user.info kernel: [    6.108758] init: - preinit -
Thu Apr 12 07:59:18 2018 kern.info kernel: [    8.430198] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
Thu Apr 12 07:59:18 2018 kern.info kernel: [    8.430909] dwmac1000: Master AXI performs any burst length
Thu Apr 12 07:59:18 2018 kern.info kernel: [    8.439157] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Thu Apr 12 07:59:18 2018 kern.info kernel: [    8.444617] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Thu Apr 12 07:59:18 2018 kern.info kernel: [    8.454056] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Thu Apr 12 07:59:18 2018 kern.info kernel: [    9.512670] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
Thu Apr 12 07:59:18 2018 kern.info kernel: [    9.512756] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Thu Apr 12 07:59:18 2018 user.info kernel: [   11.657604] mount_root: loading kmods from internal overlay
Thu Apr 12 07:59:18 2018 user.info kernel: [   11.694276] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Thu Apr 12 07:59:18 2018 user.info kernel: [   11.695971] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Thu Apr 12 07:59:18 2018 kern.notice kernel: [   14.722611] jffs2: notice: (143) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (2 unchecked, 0 orphan) and 25 of xref (0 dead, 0 orphan) found.
Thu Apr 12 07:59:18 2018 user.info kernel: [   14.724343] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Apr 12 07:59:18 2018 user.info kernel: [   14.755380] block: extroot: not configured
Thu Apr 12 07:59:18 2018 kern.notice kernel: [   15.090240] jffs2: notice: (141) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (2 unchecked, 0 orphan) and 25 of xref (0 dead, 0 orphan) found.
Thu Apr 12 07:59:18 2018 user.info kernel: [   15.093743] mount_root: loading kmods from internal overlay
Thu Apr 12 07:59:18 2018 user.info kernel: [   15.133255] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
Thu Apr 12 07:59:18 2018 user.info kernel: [   15.139516] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
Thu Apr 12 07:59:18 2018 user.info kernel: [   17.562984] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Apr 12 07:59:18 2018 user.info kernel: [   17.570248] block: extroot: not configured
Thu Apr 12 07:59:18 2018 user.info kernel: [   17.615031] mount_root: switching to jffs2 overlay
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   17.654047] overlayfs: upper fs does not support tmpfile.
Thu Apr 12 07:59:18 2018 user.warn kernel: [   17.661764] urandom-seed: Seeding with /etc/urandom.seed
Thu Apr 12 07:59:18 2018 user.info kernel: [   17.804991] procd: - early -
Thu Apr 12 07:59:18 2018 user.info kernel: [   17.805129] procd: - watchdog -
Thu Apr 12 07:59:18 2018 user.info kernel: [   18.510268] procd: - watchdog -
Thu Apr 12 07:59:18 2018 user.info kernel: [   18.510565] procd: - ubus -
Thu Apr 12 07:59:18 2018 user.info kernel: [   18.568227] procd: - init -
Thu Apr 12 07:59:18 2018 user.info kernel: [   18.896766] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Apr 12 07:59:18 2018 kern.info kernel: [   18.914059] ntfs: driver 2.1.32 [Flags: R/O MODULE].
Thu Apr 12 07:59:18 2018 kern.info kernel: [   18.925512] tun: Universal TUN/TAP device driver, 1.6
Thu Apr 12 07:59:18 2018 kern.info kernel: [   18.929453] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Apr 12 07:59:18 2018 kern.info kernel: [   19.205124] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Thu Apr 12 07:59:18 2018 kern.info kernel: [   19.205149] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Thu Apr 12 07:59:18 2018 kern.info kernel: [   19.222136] batman_adv: B.A.T.M.A.N. advanced 2018.1 (compatibility version 15) loaded
Thu Apr 12 07:59:18 2018 kern.info kernel: [   19.227406] u32 classifier
Thu Apr 12 07:59:18 2018 kern.info kernel: [   19.228942]     input device check on
Thu Apr 12 07:59:18 2018 kern.info kernel: [   19.231653]     Actions configured
Thu Apr 12 07:59:18 2018 kern.info kernel: [   19.236548] Mirror/redirect action on
Thu Apr 12 07:59:18 2018 kern.info kernel: [   19.266502] Ebtables v2.0 registered
Thu Apr 12 07:59:18 2018 kern.info kernel: [   19.267459] hso: drivers/net/usb/hso.c: Option Wireless
Thu Apr 12 07:59:18 2018 kern.info kernel: [   19.269247] usbcore: registered new interface driver hso
Thu Apr 12 07:59:18 2018 kern.info kernel: [   19.275686] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Apr 12 07:59:18 2018 kern.info kernel: [   19.280508] usbcore: registered new interface driver ipheth
Thu Apr 12 07:59:18 2018 kern.info kernel: [   19.625566] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.077153] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.077303] usbcore: registered new interface driver pegasus
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.085400] usbcore: registered new interface driver r8152
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.091028] usbcore: registered new interface driver ums-alauda
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.096290] usbcore: registered new interface driver ums-cypress
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.101665] usbcore: registered new interface driver ums-datafab
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.107917] usbcore: registered new interface driver ums-freecom
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.113970] usbcore: registered new interface driver ums-isd200
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.119956] usbcore: registered new interface driver ums-jumpshot
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.125609] usbcore: registered new interface driver ums-karma
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.132071] usbcore: registered new interface driver ums-sddr09
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.137811] usbcore: registered new interface driver ums-sddr55
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.143650] usbcore: registered new interface driver ums-usbat
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.154432] usbcore: registered new interface driver usbserial
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.154520] usbcore: registered new interface driver usbserial_generic
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.159734] usbserial: USB Serial support registered for generic
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.182785] xt_time: kernel timezone is -0000
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.184618] usbcore: registered new interface driver asix
Thu Apr 12 07:59:18 2018 kern.debug kernel: [   20.198895] ath10k_pci 0000:01:00.0: assign IRQ: got 66
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.198923] ath10k 4.13 driver, optimized for CT firmware, probing pci device: 0x40.
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.199762] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
Thu Apr 12 07:59:18 2018 kern.debug kernel: [   20.205956] ath10k_pci 0000:01:00.0: enabling bus mastering
Thu Apr 12 07:59:18 2018 kern.info kernel: [   20.206643] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   20.379562] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:01:00.0.txt failed with error -2
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   20.379603] ath10k_pci 0000:01:00.0: Falling back to user helper
Thu Apr 12 07:59:18 2018 kern.err kernel: [   20.423992] firmware ath10k!fwcfg-pci-0000:01:00.0.txt: firmware_loading_store: map pages failed
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   20.428612] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/ct-firmware-5.bin failed with error -2
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   20.431855] ath10k_pci 0000:01:00.0: Falling back to user helper
Thu Apr 12 07:59:18 2018 kern.err kernel: [   20.476074] firmware ath10k!QCA99X0!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   20.476367] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/ct-firmware-2.bin failed with error -2
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   20.484421] ath10k_pci 0000:01:00.0: Falling back to user helper
Thu Apr 12 07:59:18 2018 kern.err kernel: [   20.527292] firmware ath10k!QCA99X0!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   20.527581] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   20.535613] ath10k_pci 0000:01:00.0: Falling back to user helper
Thu Apr 12 07:59:18 2018 kern.err kernel: [   20.578905] firmware ath10k!QCA99X0!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
Thu Apr 12 07:59:18 2018 kern.info kernel: [   21.625618] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
Thu Apr 12 07:59:18 2018 kern.info kernel: [   21.625660] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 0
Thu Apr 12 07:59:18 2018 kern.info kernel: [   21.636926] ath10k_pci 0000:01:00.0: firmware ver 10.4-ct-9980-fW-011-cf79c7f api 5 features peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,cust-stats-CT crc32 2da81174
Thu Apr 12 07:59:18 2018 kern.info kernel: [   21.700379] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:1 crc32 08fa09f2
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   22.885212] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   22.885246] ath10k_pci 0000:01:00.0: msdu-desc: 2500  skid: 32
Thu Apr 12 07:59:18 2018 kern.info kernel: [   22.960692] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0'
Thu Apr 12 07:59:18 2018 kern.info kernel: [   22.961375] ath10k_pci 0000:01:00.0: wmi print 'free: 33100 iram: 16188 sram: 16448'
Thu Apr 12 07:59:18 2018 kern.info kernel: [   23.107646] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
Thu Apr 12 07:59:18 2018 kern.debug kernel: [   23.238723] ath: EEPROM regdomain: 0x0
Thu Apr 12 07:59:18 2018 kern.debug kernel: [   23.238732] ath: EEPROM indicates default country code should be used
Thu Apr 12 07:59:18 2018 kern.debug kernel: [   23.238738] ath: doing EEPROM country->regdmn map search
Thu Apr 12 07:59:18 2018 kern.debug kernel: [   23.238749] ath: country maps to regdmn code: 0x3a
Thu Apr 12 07:59:18 2018 kern.debug kernel: [   23.238757] ath: Country alpha2 being used: US
Thu Apr 12 07:59:18 2018 kern.debug kernel: [   23.238763] ath: Regpair used: 0x3a
Thu Apr 12 07:59:18 2018 kern.debug kernel: [   23.242227] ath10k_pci 0001:01:00.0: assign IRQ: got 99
Thu Apr 12 07:59:18 2018 kern.info kernel: [   23.242256] ath10k 4.13 driver, optimized for CT firmware, probing pci device: 0x40.
Thu Apr 12 07:59:18 2018 kern.info kernel: [   23.242996] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
Thu Apr 12 07:59:18 2018 kern.debug kernel: [   23.249159] ath10k_pci 0001:01:00.0: enabling bus mastering
Thu Apr 12 07:59:18 2018 kern.info kernel: [   23.249742] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   23.424569] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/fwcfg-pci-0001:01:00.0.txt failed with error -2
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   23.424601] ath10k_pci 0001:01:00.0: Falling back to user helper
Thu Apr 12 07:59:18 2018 kern.err kernel: [   23.682485] firmware ath10k!fwcfg-pci-0001:01:00.0.txt: firmware_loading_store: map pages failed
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   24.244375] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/ct-firmware-5.bin failed with error -2
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   24.244413] ath10k_pci 0001:01:00.0: Falling back to user helper
Thu Apr 12 07:59:18 2018 kern.err kernel: [   24.281949] firmware ath10k!QCA99X0!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   24.282221] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/ct-firmware-2.bin failed with error -2
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   24.290276] ath10k_pci 0001:01:00.0: Falling back to user helper
Thu Apr 12 07:59:18 2018 kern.err kernel: [   24.336129] firmware ath10k!QCA99X0!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   24.336301] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   24.344415] ath10k_pci 0001:01:00.0: Falling back to user helper
Thu Apr 12 07:59:18 2018 kern.err kernel: [   24.372388] firmware ath10k!QCA99X0!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
Thu Apr 12 07:59:18 2018 kern.info kernel: [   24.372516] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
Thu Apr 12 07:59:18 2018 kern.info kernel: [   24.380325] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 0
Thu Apr 12 07:59:18 2018 kern.info kernel: [   24.391587] ath10k_pci 0001:01:00.0: firmware ver 10.4-ct-9980-fW-011-cf79c7f api 5 features peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,cust-stats-CT crc32 2da81174
Thu Apr 12 07:59:18 2018 kern.info kernel: [   24.456893] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:2 crc32 08fa09f2
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   25.654094] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
Thu Apr 12 07:59:18 2018 kern.warn kernel: [   25.654124] ath10k_pci 0001:01:00.0: msdu-desc: 2500  skid: 32
Thu Apr 12 07:59:18 2018 kern.info kernel: [   25.731404] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0'
Thu Apr 12 07:59:18 2018 kern.info kernel: [   25.732097] ath10k_pci 0001:01:00.0: wmi print 'free: 33100 iram: 16188 sram: 16448'
Thu Apr 12 07:59:18 2018 kern.info kernel: [   25.883822] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
Thu Apr 12 07:59:18 2018 kern.debug kernel: [   26.018875] ath: EEPROM regdomain: 0x0
Thu Apr 12 07:59:18 2018 kern.debug kernel: [   26.018883] ath: EEPROM indicates default country code should be used
Thu Apr 12 07:59:18 2018 kern.debug kernel: [   26.018889] ath: doing EEPROM country->regdmn map search
Thu Apr 12 07:59:18 2018 kern.debug kernel: [   26.018900] ath: country maps to regdmn code: 0x3a
Thu Apr 12 07:59:18 2018 kern.debug kernel: [   26.018909] ath: Country alpha2 being used: US
Thu Apr 12 07:59:18 2018 kern.debug kernel: [   26.018916] ath: Regpair used: 0x3a
Thu Apr 12 07:59:18 2018 kern.info kernel: [   26.023949] usbcore: registered new interface driver ax88179_178a
Thu Apr 12 07:59:18 2018 kern.info kernel: [   26.024910] usbcore: registered new interface driver cdc_eem
Thu Apr 12 07:59:18 2018 kern.info kernel: [   26.030572] usbcore: registered new interface driver cdc_ether
Thu Apr 12 07:59:18 2018 kern.info kernel: [   26.035524] usbcore: registered new interface driver cdc_subset
Thu Apr 12 07:59:18 2018 kern.info kernel: [   26.041094] usbcore: registered new interface driver dm9601
Thu Apr 12 07:59:18 2018 kern.info kernel: [   26.244372] usbcore: registered new interface driver ftdi_sio
Thu Apr 12 07:59:18 2018 kern.info kernel: [   26.244486] usbserial: USB Serial support registered for FTDI USB Serial Device
Thu Apr 12 07:59:18 2018 kern.info kernel: [   26.404454] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
Thu Apr 12 07:59:18 2018 kern.info kernel: [   26.407221] usbcore: registered new interface driver pl2303
Thu Apr 12 07:59:18 2018 kern.info kernel: [   26.410969] usbserial: USB Serial support registered for pl2303
Thu Apr 12 07:59:18 2018 kern.info kernel: [   26.417646] usbcore: registered new interface driver rndis_host
Thu Apr 12 07:59:18 2018 kern.info kernel: [   26.423216] usbcore: registered new interface driver smsc95xx
Thu Apr 12 07:59:18 2018 user.info kernel: [   26.428471] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Apr 12 07:59:18 2018 daemon.notice haveged: haveged starting up
Thu Apr 12 07:59:18 2018 daemon.notice procd: /etc/rc.d/S19dnsmasq: Command failed: Not found
Thu Apr 12 07:59:19 2018 daemon.notice procd: /etc/rc.d/S19dnsmasq: Failed to parse json data: unexpected end of data
Thu Apr 12 07:59:19 2018 daemon.notice procd: /etc/rc.d/S19dnsmasq: Command failed: Not found
Thu Apr 12 07:59:19 2018 daemon.notice procd: /etc/rc.d/S19dnsmasq: Failed to parse json data: unexpected end of data
Thu Apr 12 07:59:19 2018 daemon.notice procd: /etc/rc.d/S19dnsmasq: Command failed: Not found
Thu Apr 12 07:59:19 2018 daemon.notice procd: /etc/rc.d/S19dnsmasq: Failed to parse json data: unexpected end of data
Thu Apr 12 07:59:19 2018 daemon.notice procd: /etc/rc.d/S19dnsmasq: Command failed: Not found
Thu Apr 12 07:59:19 2018 daemon.notice procd: /etc/rc.d/S19dnsmasq: Failed to parse json data: unexpected end of data
Thu Apr 12 07:59:19 2018 daemon.info dnsmasq[880]: started, version 2.80test2 cachesize 150
Thu Apr 12 07:59:19 2018 daemon.info dnsmasq[880]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Apr 12 07:59:19 2018 daemon.info dnsmasq[880]: using nameserver fd01:67c:2ed8:a::56:1#53
Thu Apr 12 07:59:19 2018 daemon.info dnsmasq[880]: using nameserver fd01:67c:2ed8:a::55:1#53
Thu Apr 12 07:59:19 2018 daemon.info dnsmasq[880]: using local addresses only for domain lan
Thu Apr 12 07:59:19 2018 daemon.warn dnsmasq[880]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Apr 12 07:59:19 2018 daemon.info dnsmasq[880]: read /etc/hosts - 4 addresses
Thu Apr 12 07:59:19 2018 daemon.info dnsmasq[880]: read /tmp/hosts/dhcp.cfg01411c - 4 addresses
Thu Apr 12 07:59:20 2018 daemon.info haveged: haveged: ver: 1.9.2; arch: generic; vend: ; build: (gcc 7.3.0 CV); collect: 128K
Thu Apr 12 07:59:20 2018 daemon.info haveged: haveged: cpu: (); data: 32K (P); inst: 32K (P); idx: 16/40; sz: 31328/75928
Thu Apr 12 07:59:20 2018 daemon.info haveged: haveged: fills: 0, generated: 0
Thu Apr 12 07:59:21 2018 daemon.err gluon-arp-limiter[1061]: Error - interface bat0 is not present or not a batman-adv interface
Thu Apr 12 07:59:21 2018 daemon.err gluon-arp-limiter[1061]: Error - interface bat0 is not present or not a batman-adv interface
Thu Apr 12 07:59:22 2018 user.notice : Added device handler type: tunnel
Thu Apr 12 07:59:22 2018 user.notice : Added device handler type: Network device
Thu Apr 12 07:59:22 2018 user.notice : Added device handler type: bridge
Thu Apr 12 07:59:22 2018 user.notice : Added device handler type: veth
Thu Apr 12 07:59:22 2018 user.notice : Added device handler type: macvlan
Thu Apr 12 07:59:22 2018 user.notice : Added device handler type: 8021ad
Thu Apr 12 07:59:22 2018 user.notice : Added device handler type: 8021q
Thu Apr 12 07:59:24 2018 daemon.warn netifd: You have delegated IPv6-prefixes but haven't assigned them to any interface. Did you forget to set option ip6assign on your lan-interfaces?
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.047486] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.048514] dwmac1000: Master AXI performs any burst length
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.056474] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.061911] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.071016] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.089550] br-client: port 1(eth1.1) entered blocking state
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.089584] br-client: port 1(eth1.1) entered disabled state
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.094592] device eth1.1 entered promiscuous mode
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.099915] device eth1 entered promiscuous mode
Thu Apr 12 07:59:24 2018 daemon.notice netifd: Interface 'client' is enabled
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.109958] IPv6: ADDRCONF(NETDEV_UP): br-client: link is not ready
Thu Apr 12 07:59:24 2018 user.notice sysctl: net.ipv6.conf.br-client.forwarding = 0
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.309937] Generic PHY fixed-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:00, irq=POLL)
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.310949] dwmac1000: Master AXI performs any burst length
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.318925] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.324449] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.333988] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.348647] br-wan: port 1(eth0.2) entered blocking state
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.348687] br-wan: port 1(eth0.2) entered disabled state
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.353435] device eth0.2 entered promiscuous mode
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.358415] device eth0 entered promiscuous mode
Thu Apr 12 07:59:24 2018 daemon.notice netifd: Interface 'wan6' is enabled
Thu Apr 12 07:59:24 2018 daemon.notice netifd: Interface 'wan' is enabled
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.372381] IPv6: ADDRCONF(NETDEV_UP): br-wan: link is not ready
Thu Apr 12 07:59:24 2018 daemon.notice netifd: Interface 'local_node' is enabled
Thu Apr 12 07:59:24 2018 daemon.notice netifd: Interface 'local_node' is setting up now
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.384752] IPv6: ADDRCONF(NETDEV_UP): local-node: link is not ready
Thu Apr 12 07:59:24 2018 daemon.notice netifd: Interface 'local_node' is now up
Thu Apr 12 07:59:24 2018 daemon.notice netifd: Interface 'gluon_bat0' is setting up now
Thu Apr 12 07:59:24 2018 daemon.notice netifd: Interface 'loopback' is enabled
Thu Apr 12 07:59:24 2018 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Apr 12 07:59:24 2018 daemon.notice netifd: Interface 'loopback' is now up
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.423784] IPv6: ADDRCONF(NETDEV_CHANGE): local-node: link becomes ready
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.447117] br-client: port 2(local-port) entered blocking state
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.447168] br-client: port 2(local-port) entered disabled state
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.500426] device local-port entered promiscuous mode
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.500618] br-client: port 2(local-port) entered blocking state
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.504568] br-client: port 2(local-port) entered forwarding state
Thu Apr 12 07:59:24 2018 daemon.notice netifd: bridge 'br-client' link is up
Thu Apr 12 07:59:24 2018 daemon.notice netifd: Interface 'client' has link connectivity
Thu Apr 12 07:59:24 2018 daemon.notice netifd: Interface 'client' is setting up now
Thu Apr 12 07:59:24 2018 daemon.notice netifd: Network device 'local-port' link is up
Thu Apr 12 07:59:24 2018 daemon.notice netifd: veth 'local-node' link is up
Thu Apr 12 07:59:24 2018 daemon.notice netifd: Interface 'local_node' has link connectivity
Thu Apr 12 07:59:24 2018 daemon.notice netifd: Network device 'lo' link is up
Thu Apr 12 07:59:24 2018 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Apr 12 07:59:24 2018 kern.info kernel: [   33.580780] IPv6: ADDRCONF(NETDEV_CHANGE): br-client: link becomes ready
Thu Apr 12 07:59:25 2018 user.notice firewall: Reloading firewall due to ifup of local_node (local-node)
Thu Apr 12 07:59:25 2018 kern.info kernel: [   33.997404] batman_adv: bat0: Adding interface: primary0
Thu Apr 12 07:59:25 2018 kern.info kernel: [   33.997451] batman_adv: bat0: Interface activated: primary0
Thu Apr 12 07:59:25 2018 daemon.notice netifd: Interface 'bat0' is enabled
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.004229] 8021q: adding VLAN 0 to HW filter on device bat0
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.010240] br-client: port 3(bat0) entered blocking state
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.013126] br-client: port 3(bat0) entered disabled state
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.018522] device bat0 entered promiscuous mode
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.023907] br-client: port 3(bat0) entered blocking state
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.028520] br-client: port 3(bat0) entered forwarding state
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.152834] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
Thu Apr 12 07:59:25 2018 daemon.notice netifd: Network device 'bat0' link is up
Thu Apr 12 07:59:25 2018 daemon.notice netifd: Interface 'bat0' has link connectivity
Thu Apr 12 07:59:25 2018 daemon.notice netifd: Interface 'bat0' is setting up now
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.210812] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.211658] br-client: port 1(eth1.1) entered blocking state
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.216007] br-client: port 1(eth1.1) entered forwarding state
Thu Apr 12 07:59:25 2018 daemon.notice netifd: Interface 'bat0' is now up
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.227851] batman_adv: bat0: Interface deactivated: primary0
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.375345] IPv6: ADDRCONF(NETDEV_UP): primary0: link is not ready
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.377046] batman_adv: bat0: Interface activated: primary0
Thu Apr 12 07:59:25 2018 daemon.notice netifd: Interface 'gluon_bat0' is now up
Thu Apr 12 07:59:25 2018 daemon.notice netifd: Network device 'primary0' link is up
Thu Apr 12 07:59:25 2018 daemon.notice netifd: Network device 'eth1' link is up
Thu Apr 12 07:59:25 2018 daemon.notice netifd: VLAN 'eth1.1' link is up
Thu Apr 12 07:59:25 2018 daemon.notice netifd: Network device 'eth0' link is up
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.402783] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.402846] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Apr 12 07:59:25 2018 daemon.notice netifd: VLAN 'eth0.2' link is up
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.437607] br-wan: port 1(eth0.2) entered blocking state
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.437648] br-wan: port 1(eth0.2) entered forwarding state
Thu Apr 12 07:59:25 2018 daemon.notice netifd: bridge 'br-wan' link is up
Thu Apr 12 07:59:25 2018 daemon.notice netifd: Interface 'wan6' has link connectivity
Thu Apr 12 07:59:25 2018 daemon.notice netifd: Interface 'wan6' is setting up now
Thu Apr 12 07:59:25 2018 daemon.notice netifd: Interface 'wan' has link connectivity
Thu Apr 12 07:59:25 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.468145] IPv6: ADDRCONF(NETDEV_CHANGE): br-wan: link becomes ready
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.509936] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.509975] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
Thu Apr 12 07:59:25 2018 daemon.notice netifd: Interface 'client' is now down
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.617629] br-client: port 3(bat0) entered disabled state
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.617721] br-client: port 2(local-port) entered disabled state
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.622046] br-client: port 1(eth1.1) entered disabled state
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.658192] device bat0 left promiscuous mode
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.658281] br-client: port 3(bat0) entered disabled state
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.683422] device eth1.1 left promiscuous mode
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.683449] device eth1 left promiscuous mode
Thu Apr 12 07:59:25 2018 kern.info kernel: [   34.686880] br-client: port 1(eth1.1) entered disabled state
Thu Apr 12 07:59:26 2018 kern.info kernel: [   34.862903] IPv6: ADDRCONF(NETDEV_UP): eth1.1: link is not ready
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.012342] device local-port left promiscuous mode
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.012444] br-client: port 2(local-port) entered disabled state
Thu Apr 12 07:59:26 2018 kern.debug kernel: [   35.072032] ath: EEPROM regdomain: 0x8114
Thu Apr 12 07:59:26 2018 kern.debug kernel: [   35.072040] ath: EEPROM indicates we should expect a country code
Thu Apr 12 07:59:26 2018 kern.debug kernel: [   35.072044] ath: doing EEPROM country->regdmn map search
Thu Apr 12 07:59:26 2018 kern.debug kernel: [   35.072049] ath: country maps to regdmn code: 0x37
Thu Apr 12 07:59:26 2018 kern.debug kernel: [   35.072056] ath: Country alpha2 being used: DE
Thu Apr 12 07:59:26 2018 kern.debug kernel: [   35.072060] ath: Regpair used: 0x37
Thu Apr 12 07:59:26 2018 kern.debug kernel: [   35.072067] ath: regdomain 0x8114 dynamically updated by user
Thu Apr 12 07:59:26 2018 kern.debug kernel: [   35.072095] ath: EEPROM regdomain: 0x8114
Thu Apr 12 07:59:26 2018 kern.debug kernel: [   35.072099] ath: EEPROM indicates we should expect a country code
Thu Apr 12 07:59:26 2018 kern.debug kernel: [   35.072103] ath: doing EEPROM country->regdmn map search
Thu Apr 12 07:59:26 2018 kern.debug kernel: [   35.072107] ath: country maps to regdmn code: 0x37
Thu Apr 12 07:59:26 2018 kern.debug kernel: [   35.072111] ath: Country alpha2 being used: DE
Thu Apr 12 07:59:26 2018 kern.debug kernel: [   35.072115] ath: Regpair used: 0x37
Thu Apr 12 07:59:26 2018 kern.debug kernel: [   35.072119] ath: regdomain 0x8114 dynamically updated by user
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.074044] IPv6: ADDRCONF(NETDEV_UP): local-port: link is not ready
Thu Apr 12 07:59:26 2018 daemon.notice netifd: Interface 'client' is disabled
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.148664] br-client: port 1(bat0) entered blocking state
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.148700] br-client: port 1(bat0) entered disabled state
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.165607] device bat0 entered promiscuous mode
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.168363] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.170485] dwmac1000: Master AXI performs any burst length
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.179255] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.184861] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.193745] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.248563] br-client: port 2(eth1.1) entered blocking state
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.248593] br-client: port 2(eth1.1) entered disabled state
Thu Apr 12 07:59:26 2018 daemon.err block: /dev/mtdblock12 is already mounted on /rom
Thu Apr 12 07:59:26 2018 daemon.err block: /dev/mtdblock13 is already mounted on /overlay
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.269526] device eth1.1 entered promiscuous mode
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.269552] device eth1 entered promiscuous mode
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.281250] br-client: port 3(local-port) entered blocking state
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.281281] br-client: port 3(local-port) entered disabled state
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.290841] device local-port entered promiscuous mode
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.293970] br-client: port 3(local-port) entered blocking state
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.297284] br-client: port 3(local-port) entered forwarding state
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.303576] br-client: port 1(bat0) entered blocking state
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.309429] br-client: port 1(bat0) entered forwarding state
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.315364] IPv6: ADDRCONF(NETDEV_UP): br-client: link is not ready
Thu Apr 12 07:59:26 2018 daemon.notice netifd: Interface 'client' is enabled
Thu Apr 12 07:59:26 2018 daemon.notice netifd: Interface 'client' is setting up now
Thu Apr 12 07:59:26 2018 daemon.notice netifd: VLAN 'eth1.1' link is down
Thu Apr 12 07:59:26 2018 daemon.notice netifd: wan (1649): udhcpc: started, v1.28.3
Thu Apr 12 07:59:26 2018 daemon.notice netifd: Network device 'eth1' link is down
Thu Apr 12 07:59:26 2018 daemon.err odhcp6c[1651]: Failed to send RS (Address not available)
Thu Apr 12 07:59:26 2018 daemon.err odhcp6c[1693]: Failed to send RS (Permission denied)
Thu Apr 12 07:59:26 2018 daemon.notice netifd: wan (1649): udhcpc: sending discover
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.542820] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
Thu Apr 12 07:59:26 2018 kern.info kernel: [   35.542854] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
Thu Apr 12 07:59:26 2018 daemon.notice netifd: wan (1649): udhcpc: sending select for 192.168.22.85
Thu Apr 12 07:59:26 2018 daemon.notice netifd: wan (1649): udhcpc: lease of 192.168.22.85 obtained, lease time 864000
Thu Apr 12 07:59:27 2018 daemon.notice netifd: Interface 'wan' is now up
Thu Apr 12 07:59:27 2018 authpriv.info dropbear[1817]: Not backgrounding
Thu Apr 12 07:59:27 2018 daemon.notice netifd: radio0 (1237): command failed: Not supported (-95)
Thu Apr 12 07:59:27 2018 daemon.notice netifd: radio1 (1238): command failed: Not supported (-95)
Thu Apr 12 07:59:27 2018 user.notice firewall: Reloading firewall due to ifup of wan (br-wan)
Thu Apr 12 07:59:27 2018 kern.info kernel: [   36.232799] IPv6: ADDRCONF(NETDEV_CHANGE): br-client: link becomes ready
Thu Apr 12 07:59:27 2018 kern.info kernel: [   36.233137] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
Thu Apr 12 07:59:27 2018 kern.info kernel: [   36.238617] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Thu Apr 12 07:59:27 2018 daemon.notice netifd: Network device 'eth1' link is up
Thu Apr 12 07:59:27 2018 kern.info kernel: [   36.279706] br-client: port 2(eth1.1) entered blocking state
Thu Apr 12 07:59:27 2018 kern.info kernel: [   36.279745] br-client: port 2(eth1.1) entered forwarding state
Thu Apr 12 07:59:27 2018 daemon.notice netifd: VLAN 'eth1.1' link is up
Thu Apr 12 07:59:27 2018 daemon.err odhcp6c[1693]: Failed to send DHCPV6 message to ff02::1:2 (Address not available)
Thu Apr 12 07:59:27 2018 daemon.notice netifd: radio0 (1237): Usage:	iw [options] dev <devname> set channel <channel> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz]
Thu Apr 12 07:59:27 2018 daemon.notice netifd: radio0 (1237): Options:
Thu Apr 12 07:59:27 2018 daemon.notice netifd: radio0 (1237): 	--debug		enable netlink debugging
Thu Apr 12 07:59:28 2018 user.notice sysctl: net.ipv6.conf.local-node.forwarding = 0
Thu Apr 12 07:59:28 2018 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Thu Apr 12 07:59:28 2018 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Thu Apr 12 07:59:28 2018 daemon.err odhcp6c[1693]: Failed to send DHCPV6 message to ff02::1:2 (Address not available)
Thu Apr 12 07:59:29 2018 daemon.err odhcp6c[1693]: Failed to send DHCPV6 message to ff02::1:2 (Address not available)
Thu Apr 12 07:59:29 2018 kern.warn kernel: [   38.286733] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
Thu Apr 12 07:59:29 2018 kern.warn kernel: [   38.286765] ath10k_pci 0001:01:00.0: msdu-desc: 2500  skid: 32
Thu Apr 12 07:59:29 2018 kern.info kernel: [   38.363825] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0'
Thu Apr 12 07:59:29 2018 kern.info kernel: [   38.364522] ath10k_pci 0001:01:00.0: wmi print 'free: 33100 iram: 16188 sram: 16448'
Thu Apr 12 07:59:29 2018 kern.info kernel: [   38.563887] batman_adv: bat0: Changing gw mode from: off to: client
Thu Apr 12 07:59:29 2018 kern.info kernel: [   38.564175] batman_adv: bat0: hop_penalty: Changing from: 30 to: 15
Thu Apr 12 07:59:29 2018 kern.info kernel: [   38.569428] batman_adv: bat0: multicast_fanout: Changing from: 1 to: 16
Thu Apr 12 07:59:29 2018 kern.info kernel: [   38.575908] batman_adv: bat0: New skb noflood mark: 0x00000004/0x00000004
Thu Apr 12 07:59:29 2018 kern.info kernel: [   38.582025] batman_adv: bat0: orig_interval: Changing from: 1000 to: 5000
Thu Apr 12 07:59:29 2018 kern.info kernel: [   38.647730] IPv6: ADDRCONF(NETDEV_UP): client1: link is not ready
Thu Apr 12 07:59:29 2018 daemon.info dnsmasq[2536]: started, version 2.80test2 cachesize 150
Thu Apr 12 07:59:29 2018 daemon.info dnsmasq[2536]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Apr 12 07:59:29 2018 daemon.info dnsmasq[2536]: reading /var/gluon/wan-dnsmasq/resolv.conf
Thu Apr 12 07:59:29 2018 daemon.info dnsmasq[2536]: using nameserver 192.168.22.66#53
Thu Apr 12 07:59:29 2018 daemon.info dnsmasq[2536]: cleared cache
Thu Apr 12 07:59:30 2018 kern.info kernel: [   39.285270] ath10k_pci 0001:01:00.0: NOTE:  Firmware DBGLOG output disabled in debug_mask: 0x10000000
Thu Apr 12 07:59:30 2018 daemon.err odhcp6c[1693]: Failed to send RS (Address not available)
Thu Apr 12 07:59:31 2018 kern.warn kernel: [   40.041286] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
Thu Apr 12 07:59:31 2018 kern.warn kernel: [   40.041321] ath10k_pci 0000:01:00.0: msdu-desc: 2500  skid: 32
Thu Apr 12 07:59:31 2018 daemon.notice fastd[2711]: fastd v18 starting
Thu Apr 12 07:59:31 2018 kern.info kernel: [   40.116721] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0'
Thu Apr 12 07:59:31 2018 kern.info kernel: [   40.117386] ath10k_pci 0000:01:00.0: wmi print 'free: 33100 iram: 16188 sram: 16448'
Thu Apr 12 07:59:31 2018 kern.info kernel: [   40.381296] IPv6: ADDRCONF(NETDEV_UP): client0: link is not ready
Thu Apr 12 07:59:31 2018 user.notice sysctl: net.ipv6.conf.br-client.forwarding = 0
Thu Apr 12 07:59:31 2018 kern.info kernel: [   40.385983] br-client: port 4(client1) entered blocking state
Thu Apr 12 07:59:31 2018 kern.info kernel: [   40.386392] br-client: port 4(client1) entered disabled state
Thu Apr 12 07:59:31 2018 kern.info kernel: [   40.392967] device client1 entered promiscuous mode
Thu Apr 12 07:59:31 2018 daemon.notice fastd[2711]: changed to UID 0, GID 800
Thu Apr 12 07:59:31 2018 daemon.notice netifd: Interface 'wan6' is now up
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: adding peer <mesh_vpn_backbone_peer_gw04>
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: adding peer <mesh_vpn_backbone_peer_gw07>
Thu Apr 12 07:59:31 2018 kern.info kernel: [   40.407608] br-client: port 5(client0) entered blocking state
Thu Apr 12 07:59:31 2018 kern.info kernel: [   40.407639] br-client: port 5(client0) entered disabled state
Thu Apr 12 07:59:31 2018 kern.info kernel: [   40.412788] device client0 entered promiscuous mode
Thu Apr 12 07:59:31 2018 daemon.notice hostapd: client1: interface state UNINITIALIZED->COUNTRY_UPDATE
Thu Apr 12 07:59:31 2018 daemon.notice netifd: Interface 'mesh_vpn' is enabled
Thu Apr 12 07:59:31 2018 daemon.notice netifd: Network device 'mesh-vpn' link is up
Thu Apr 12 07:59:31 2018 daemon.notice netifd: Interface 'mesh_vpn' has link connectivity
Thu Apr 12 07:59:31 2018 daemon.notice netifd: Interface 'mesh_vpn' is setting up now
Thu Apr 12 07:59:31 2018 daemon.notice hostapd: client0: interface state UNINITIALIZED->COUNTRY_UPDATE
Thu Apr 12 07:59:31 2018 daemon.err hostapd: Using interface client0 with hwaddr 4e:f4:24:d7:d9:d8 and ssid "darmstadt.freifunk.net"
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: adding peer <mesh_vpn_backbone_peer_gw08>
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: adding peer <mesh_vpn_backbone_peer_gw05>
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: adding peer <mesh_vpn_backbone_peer_gw01>
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: adding peer <mesh_vpn_backbone_peer_gw02>
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: adding peer <mesh_vpn_backbone_peer_gw06>
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: adding peer <mesh_vpn_backbone_peer_gw03>
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: resolving host `gw03.darmstadt.freifunk.net' for peer <mesh_vpn_backbone_peer_gw03>...
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: resolving host `gw06.darmstadt.freifunk.net' for peer <mesh_vpn_backbone_peer_gw06>...
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: resolving host `gw02.darmstadt.freifunk.net' for peer <mesh_vpn_backbone_peer_gw02>...
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: resolving host `gw01.darmstadt.freifunk.net' for peer <mesh_vpn_backbone_peer_gw01>...
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: resolving host `gw05.darmstadt.freifunk.net' for peer <mesh_vpn_backbone_peer_gw05>...
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: resolving host `gw08.darmstadt.freifunk.net' for peer <mesh_vpn_backbone_peer_gw08>...
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: resolving host `gw07.darmstadt.freifunk.net' for peer <mesh_vpn_backbone_peer_gw07>...
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: resolving host `gw04.darmstadt.freifunk.net' for peer <mesh_vpn_backbone_peer_gw04>...
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: resolved host `gw08.darmstadt.freifunk.net' successfully
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: resolved host `gw04.darmstadt.freifunk.net' successfully
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: resolved host `gw01.darmstadt.freifunk.net' successfully
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: resolved host `gw06.darmstadt.freifunk.net' successfully
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: resolved host `gw07.darmstadt.freifunk.net' successfully
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: resolved host `gw03.darmstadt.freifunk.net' successfully
Thu Apr 12 07:59:31 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led USB 1
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: resolved host `gw05.darmstadt.freifunk.net' successfully
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: resolved host `gw02.darmstadt.freifunk.net' successfully
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: sending handshake to <mesh_vpn_backbone_peer_gw03>[82.195.73.42:10010]...
Thu Apr 12 07:59:31 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led USB 2
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: received handshake response from <mesh_vpn_backbone_peer_gw03>[82.195.73.42:10010] using fastd v18
Thu Apr 12 07:59:31 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led wan
Thu Apr 12 07:59:31 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led lan
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: 82.195.73.42:10010 authorized as <mesh_vpn_backbone_peer_gw03>
Thu Apr 12 07:59:31 2018 daemon.notice fastd[2711]: connection with <mesh_vpn_backbone_peer_gw03> established.
Thu Apr 12 07:59:31 2018 daemon.info fastd[2711]: new session with <mesh_vpn_backbone_peer_gw03> established using method `salsa2012+umac'.
Thu Apr 12 07:59:32 2018 daemon.notice netifd: Interface 'mesh_vpn' is now up
Thu Apr 12 07:59:32 2018 kern.info kernel: [   40.854840] IPv6: ADDRCONF(NETDEV_CHANGE): client0: link becomes ready
Thu Apr 12 07:59:32 2018 kern.info kernel: [   40.855076] br-client: port 5(client0) entered blocking state
Thu Apr 12 07:59:32 2018 kern.info kernel: [   40.860290] br-client: port 5(client0) entered forwarding state
Thu Apr 12 07:59:32 2018 daemon.err hostapd: Using interface client1 with hwaddr ec:08:6b:24:c2:54 and ssid "darmstadt.freifunk.net"
Thu Apr 12 07:59:32 2018 user.notice firewall: Reloading firewall due to ifup of wan6 (br-wan)
Thu Apr 12 07:59:32 2018 kern.info kernel: [   41.264106] batman_adv: bat0: Adding interface: mesh-vpn
Thu Apr 12 07:59:32 2018 kern.info kernel: [   41.264136] batman_adv: bat0: The MTU of interface mesh-vpn is too small (1312) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
Thu Apr 12 07:59:32 2018 kern.info kernel: [   41.270293] batman_adv: bat0: Interface activated: mesh-vpn
Thu Apr 12 07:59:32 2018 kern.info kernel: [   41.293681] IPv6: ADDRCONF(NETDEV_CHANGE): client1: link becomes ready
Thu Apr 12 07:59:32 2018 kern.info kernel: [   41.298211] br-client: port 4(client1) entered blocking state
Thu Apr 12 07:59:32 2018 kern.info kernel: [   41.304709] br-client: port 4(client1) entered forwarding state
Thu Apr 12 07:59:32 2018 daemon.notice hostapd: client1: interface state COUNTRY_UPDATE->ENABLED
Thu Apr 12 07:59:32 2018 daemon.notice hostapd: client1: AP-ENABLED
Thu Apr 12 07:59:32 2018 daemon.notice hostapd: client0: interface state COUNTRY_UPDATE->ENABLED
Thu Apr 12 07:59:32 2018 daemon.notice hostapd: client0: AP-ENABLED
Thu Apr 12 07:59:32 2018 daemon.info procd: - init complete -
Thu Apr 12 07:59:32 2018 daemon.info dnsmasq[2536]: reading /var/gluon/wan-dnsmasq/resolv.conf
Thu Apr 12 07:59:32 2018 daemon.info dnsmasq[2536]: using nameserver fd00::3631:c4ff:fe39:4ee1#53
Thu Apr 12 07:59:32 2018 daemon.info dnsmasq[2536]: using nameserver 192.168.22.66#53
Thu Apr 12 07:59:32 2018 kern.info kernel: [   41.489276] IPv6: ADDRCONF(NETDEV_UP): mesh0: link is not ready
Thu Apr 12 07:59:32 2018 kern.info kernel: [   41.518477] IPv6: ADDRCONF(NETDEV_UP): mesh1: link is not ready
Thu Apr 12 07:59:32 2018 user.notice firewall: Reloading firewall due to ifup of mesh_vpn (mesh-vpn)
Thu Apr 12 07:59:33 2018 daemon.warn fastd[2711]: sendmsg: Operation not permitted
Thu Apr 12 07:59:33 2018 kern.info kernel: [   42.035921] IPv6: ADDRCONF(NETDEV_CHANGE): mesh0: link becomes ready
Thu Apr 12 07:59:33 2018 kern.info kernel: [   42.326236] IPv6: ADDRCONF(NETDEV_CHANGE): mesh1: link becomes ready
Thu Apr 12 07:59:33 2018 daemon.notice netifd: Network device 'mesh0' link is up
Thu Apr 12 07:59:33 2018 daemon.notice netifd: Interface 'mesh_radio0' is enabled
Thu Apr 12 07:59:33 2018 daemon.notice netifd: Interface 'mesh_radio0' has link connectivity
Thu Apr 12 07:59:33 2018 daemon.notice netifd: Interface 'mesh_radio0' is setting up now
Thu Apr 12 07:59:33 2018 daemon.notice netifd: Network device 'client0' link is up
Thu Apr 12 07:59:33 2018 daemon.notice netifd: Network device 'mesh1' link is up
Thu Apr 12 07:59:33 2018 daemon.notice netifd: Interface 'mesh_radio1' is enabled
Thu Apr 12 07:59:33 2018 daemon.notice netifd: Interface 'mesh_radio1' has link connectivity
Thu Apr 12 07:59:33 2018 daemon.notice netifd: Interface 'mesh_radio1' is setting up now
Thu Apr 12 07:59:33 2018 daemon.notice netifd: Network device 'client1' link is up
Thu Apr 12 07:59:33 2018 daemon.notice netifd: mesh_radio0 (3336): ip: SIOCSIFMTU: No such device
Thu Apr 12 07:59:33 2018 daemon.notice netifd: mesh_radio1 (3338): ip: SIOCSIFMTU: No such device
Thu Apr 12 07:59:33 2018 daemon.notice netifd: Interface 'mesh_radio0' is now up
Thu Apr 12 07:59:33 2018 daemon.notice netifd: Interface 'mesh_radio1' is now up
Thu Apr 12 07:59:34 2018 kern.info kernel: [   42.769864] batman_adv: bat0: Adding interface: mesh0
Thu Apr 12 07:59:34 2018 kern.info kernel: [   42.769897] batman_adv: bat0: Interface activated: mesh0
Thu Apr 12 07:59:34 2018 kern.info kernel: [   42.808278] batman_adv: bat0: Adding interface: mesh1
Thu Apr 12 07:59:34 2018 kern.info kernel: [   42.808307] batman_adv: bat0: Interface activated: mesh1
Thu Apr 12 07:59:34 2018 user.notice firewall: Reloading firewall due to ifup of mesh_radio0 (mesh0)
Thu Apr 12 07:59:34 2018 daemon.err odhcp6c[1693]: Failed to send DHCPV6 message to ff02::1:2 (Operation not permitted)
Thu Apr 12 07:59:34 2018 user.notice firewall: Reloading firewall due to ifup of mesh_radio1 (mesh1)
Thu Apr 12 07:59:34 2018 daemon.err odhcp6c[1693]: Failed to send DHCPV6 message to ff02::1:2 (Operation not permitted)
Thu Apr 12 07:59:36 2018 kern.info kernel: [   45.383154] batman_adv: bat0: IGMP Querier appeared
Thu Apr 12 07:59:36 2018 kern.info kernel: [   45.383199] batman_adv: bat0: MLD Querier appeared
Wed Aug  8 00:07:16 2018 daemon.notice netifd: Interface 'client' is now up
Wed Aug  8 00:07:16 2018 user.notice firewall: Reloading firewall due to ifup of client (br-client)
Wed Aug  8 00:07:27 2018 kern.warn kernel: [   65.114428] NOHZ: local_softirq_pending 08
Wed Aug  8 00:07:47 2018 kern.warn kernel: [   85.594090] NOHZ: local_softirq_pending 08
Wed Aug  8 00:07:50 2018 daemon.err gluon-radv-filterd[1879]: Switching to da:ff:01:00:06:04 (TQ=35)
Wed Aug  8 00:07:51 2018 user.notice firewall: Reloading firewall due to ifupdate of client (br-client)
Wed Aug  8 00:08:22 2018 authpriv.info dropbear[4564]: Child connection from 2003:c5:bf03:3100:2e0e:5fa7:3719:7c96:56792
Wed Aug  8 00:08:23 2018 authpriv.notice dropbear[4564]: Pubkey auth succeeded for 'root' with key sha1!! 7f:84:34:95:e8:10:01:cb:4b:ce:39:29:69:94:c0:b3:48:19:3d:49 from 2003:c5:bf03:3100:2e0e:5fa7:3719:7c96:56792
Wed Aug  8 00:08:28 2018 kern.warn kernel: [  126.554208] NOHZ: local_softirq_pending 08

dmesg

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.54 (hexa@build.ffda.io) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7156+7-a297324a13)) #0 SMP Thu Apr 12 05:50:02 2018
[    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: TP-Link Archer C2600
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 122880
[    0.000000] free_area_init_node: node 0, pgdat c0b27b00, node_mem_map ddc39000
[    0.000000]   Normal zone: 960 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 122880 pages, LIFO batch:31
[    0.000000] random: get_random_bytes called from start_kernel+0x88/0x40c with crng_init=0
[    0.000000] percpu: Embedded 15 pages/cpu @ddc01000 s29324 r8192 d23924 u61440
[    0.000000] pcpu-alloc: s29324 r8192 d23924 u61440 alloc=15*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 121920
[    0.000000] Kernel command line:
[    0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8 root=mtd:rootfs rootfstype=squashfs
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 478384K/491520K available (4832K kernel code, 161K rwdata, 1280K rodata, 1024K init, 250K bss, 13136K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xde800000 - 0xff800000   ( 528 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xde000000   ( 480 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0208000 - 0xc07b80f0   (5825 kB)
[    0.000000]       .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
[    0.000000]       .data : 0xc0b00000 - 0xc0b28400   ( 161 kB)
[    0.000000]        .bss : 0xc0b2a000 - 0xc0b68aec   ( 251 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[    0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[    0.000019] Switching to timer-based delay loop, resolution 160ns
[    0.000237] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[    0.000258] pid_max: default: 32768 minimum: 301
[    0.000381] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000398] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000962] CPU: Testing write buffer coherency: ok
[    0.001692] Setting up static identity map for 0x42300000 - 0x42300060
[    0.001845] Hierarchical SRCU implementation.
[    0.002563] smp: Bringing up secondary CPUs ...
[    0.004329] smp: Brought up 1 node, 2 CPUs
[    0.004343] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[    0.004354] CPU: All CPU(s) started in SVC mode.
[    0.015241] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[    0.015399] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.015423] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.015536] pinctrl core: initialized pinctrl subsystem
[    0.016519] NET: Registered protocol family 16
[    0.016759] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.018096] cpuidle: using governor ladder
[    0.018161] cpuidle: using governor menu
[    0.038818] msm_bus_fabric_init_driver
[    0.040215] usbcore: registered new interface driver usbfs
[    0.040303] usbcore: registered new interface driver hub
[    0.040400] usbcore: registered new device driver usb
[    0.040456] pps_core: LinuxPPS API ver. 1 registered
[    0.040468] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.040500] PTP clock support registered
[    0.042360] clocksource: Switched to clocksource dg_timer
[    0.045607] NET: Registered protocol family 2
[    0.046199] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.046241] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.046294] TCP: Hash tables configured (established 4096 bind 4096)
[    0.046383] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.046409] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.046563] NET: Registered protocol family 1
[    0.046610] PCI: CLS 0 bytes, default 64
[    0.047725] No memory allocated for crashlog
[    0.047959] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    0.053052] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.053069] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.061295] io scheduler noop registered
[    0.061312] io scheduler deadline registered (default)
[    0.062975] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
[    0.063094] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
[    0.063187] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
[    0.064014] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[    0.064056] OF: PCI:    IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[    0.064081] OF: PCI:   MEM 0x08000000..0x0fdfffff -> 0x08000000
[    0.163076] qcom-pcie 1b500000.pci: link up
[    0.163252] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[    0.163274] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.163293] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[    0.163308] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[    0.163324] pci_bus 0000:00: scanning bus
[    0.163372] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[    0.163469] pci 0000:00:00.0: calling pci_fixup_ide_bases+0x0/0x44
[    0.163541] pci 0000:00:00.0: supports D1
[    0.163552] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.163567] pci 0000:00:00.0: PME# disabled
[    0.163823] pci_bus 0000:00: fixups for bus
[    0.163847] PCI: bus0: Fast back to back transfers disabled
[    0.163865] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[    0.163986] pci_bus 0000:01: scanning bus
[    0.164162] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[    0.164510] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.164979] pci 0000:01:00.0: calling pci_fixup_ide_bases+0x0/0x44
[    0.165620] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.165660] pci 0000:01:00.0: PME# disabled
[    0.165995] pci_bus 0000:01: fixups for bus
[    0.166065] PCI: bus1: Fast back to back transfers disabled
[    0.166080] pci_bus 0000:01: bus scan returning with max=01
[    0.166096] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[    0.166114] pci_bus 0000:00: bus scan returning with max=ff
[    0.166163] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[    0.166187] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[    0.166316] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    0.166340] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x081fffff]
[    0.166376] pci 0000:00:00.0: calling qcom_pcie_fixup_final+0x0/0x94
[    0.166571] pcieport 0000:00:00.0: assign IRQ: got 66
[    0.166893] pcieport 0000:00:00.0: AER enabled with IRQ 34
[    0.167013] pci 0000:01:00.0: calling qcom_pcie_fixup_final+0x0/0x94
[    0.167456] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
[    0.167553] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
[    0.167657] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
[    0.168458] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[    0.168493] OF: PCI:    IO 0x31e00000..0x31efffff -> 0x31e00000
[    0.168516] OF: PCI:   MEM 0x2e000000..0x31dfffff -> 0x2e000000
[    0.278424] qcom-pcie 1b700000.pci: link up
[    0.278584] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[    0.278602] pci_bus 0001:00: root bus resource [bus 00-ff]
[    0.278616] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[    0.278629] pci_bus 0001:00: scanning bus
[    0.278668] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[    0.278742] pci 0001:00:00.0: calling pci_fixup_ide_bases+0x0/0x44
[    0.278804] pci 0001:00:00.0: supports D1
[    0.278814] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[    0.278827] pci 0001:00:00.0: PME# disabled
[    0.279068] pci_bus 0001:00: fixups for bus
[    0.279087] PCI: bus0: Fast back to back transfers disabled
[    0.279105] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[    0.279222] pci_bus 0001:01: scanning bus
[    0.279409] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[    0.279780] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.280282] pci 0001:01:00.0: calling pci_fixup_ide_bases+0x0/0x44
[    0.280973] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[    0.281017] pci 0001:01:00.0: PME# disabled
[    0.281357] pci_bus 0001:01: fixups for bus
[    0.281433] PCI: bus1: Fast back to back transfers disabled
[    0.281447] pci_bus 0001:01: bus scan returning with max=01
[    0.281463] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[    0.281480] pci_bus 0001:00: bus scan returning with max=ff
[    0.281517] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[    0.281539] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[    0.281671] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    0.281692] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e1fffff]
[    0.281725] pci 0001:00:00.0: calling qcom_pcie_fixup_final+0x0/0x94
[    0.281905] pcieport 0001:00:00.0: assign IRQ: got 99
[    0.282204] pcieport 0001:00:00.0: AER enabled with IRQ 67
[    0.282317] pci 0001:01:00.0: calling qcom_pcie_fixup_final+0x0/0x94
[    0.284580] L2 @ QSB rate. Forcing new rate.
[    0.284795] L2 @ 384000 KHz
[    0.284963] CPU0 @ 800000 KHz
[    0.284976] CPU1 @ QSB rate. Forcing new rate.
[    0.285095] CPU1 @ 384000 KHz
[    0.289051] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[    0.290452] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
[    0.291894] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.294700] msm_serial 16340000.serial: msm_serial: detected port #0
[    0.294810] msm_serial 16340000.serial: uartclk = 7372800
[    0.294890] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 100, base_baud = 460800) is a MSM
[    0.294925] msm_serial: console setup on port #0
[    1.025172] console [ttyMSM0] enabled
[    1.029873] msm_serial: driver initialized
[    1.038541] loop: module loaded
[    1.040038] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    1.041967] m25p80 spi0.0: mx25u25635f (32768 Kbytes)
[    1.048134] 25 fixed-partitions partitions found on MTD device spi0.0
[    1.052893] Creating 25 MTD partitions on "spi0.0":
[    1.059248] 0x000000000000-0x000000020000 : "SBL1"
[    1.064864] 0x000000020000-0x000000040000 : "MIBIB"
[    1.069519] 0x000000040000-0x000000060000 : "SBL2"
[    1.074388] 0x000000060000-0x000000090000 : "SBL3"
[    1.079148] 0x000000090000-0x0000000a0000 : "DDRCONFIG"
[    1.084029] 0x0000000a0000-0x0000000b0000 : "SSD"
[    1.089052] 0x0000000b0000-0x0000000e0000 : "TZ"
[    1.094013] 0x0000000e0000-0x000000100000 : "RPM"
[    1.098593] 0x000000100000-0x000000170000 : "fs-uboot"
[    1.103282] 0x000000170000-0x0000001b0000 : "uboot-env"
[    1.108226] 0x0000001b0000-0x0000001f0000 : "radio"
[    1.113457] 0x0000001f0000-0x0000005f0000 : "os-image"
[    1.118236] 0x0000005f0000-0x000001ef0000 : "rootfs"
[    1.123495] mtd: device 12 (rootfs) set to be root filesystem
[    1.128581] 1 squashfs-split partitions found on MTD device rootfs
[    1.133597] 0x000000980000-0x000001ef0000 : "rootfs_data"
[    1.140816] 0x000001ef0000-0x000001ef0200 : "default-mac"
[    1.146252] 0x000001ef0200-0x000001ef0400 : "pin"
[    1.151488] 0x000001ef0400-0x000001f00000 : "product-info"
[    1.156279] 0x000001f00000-0x000001f10000 : "partition-table"
[    1.161560] 0x000001f10000-0x000001f20000 : "soft-version"
[    1.167499] 0x000001f20000-0x000001f30000 : "support-list"
[    1.172875] 0x000001f30000-0x000001f40000 : "profile"
[    1.178251] 0x000001f40000-0x000001f50000 : "default-config"
[    1.183441] 0x000001f50000-0x000001f90000 : "user-config"
[    1.189088] 0x000001f90000-0x000001fd0000 : "qos-db"
[    1.194516] 0x000001fd0000-0x000001fe0000 : "usb-config"
[    1.199433] 0x000001fe0000-0x000002000000 : "log"
[    1.206196] libphy: GPIO Bitbanged MDIO: probed
[    1.233220] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[    2.134936] libphy: Fixed MDIO Bus: probed
[    2.137442] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
[    2.138390] stmmac - user ID: 0x10, Synopsys ID: 0x37
[    2.144569] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
[    2.149489] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
[    2.155647] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
[    2.163640] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
[    2.171102] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
[    2.178242] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
[    2.186102] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
[    2.191847] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
[    2.199320] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.208630] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
[    2.214964] stmmac - user ID: 0x10, Synopsys ID: 0x37
[    2.220927] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
[    2.226063] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
[    2.232040] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
[    2.240116] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
[    2.247654] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
[    2.254707] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
[    2.262504] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
[    2.268418] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
[    2.275792] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.283512] i2c /dev entries driver
[    2.292285] Calibration not found.
[    2.294353] qcom-tsens 900000.thermal-sensor: tsens calibration failed
[    2.299398] Speed bin: 0
[    2.304357] PVS bin: 1
[    2.308753] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[    2.309215] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[    2.317118] sdhci: Secure Digital Host Controller Interface driver
[    2.323706] sdhci: Copyright(c) Pierre Ossman
[    2.329859] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.336831] NET: Registered protocol family 10
[    2.342137] Segment Routing with IPv6
[    2.344512] NET: Registered protocol family 17
[    2.348080] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    2.352959] 8021q: 802.1Q VLAN Support v1.8
[    2.365605] Registering SWP/SWPB emulation handler
[    2.386578] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[    2.400369] s1a: supplied by regulator-dummy
[    2.400489] s1a: Bringing 0uV into 1050000-1050000uV
[    2.404224] s1b: supplied by regulator-dummy
[    2.408735] s1b: Bringing 0uV into 1050000-1050000uV
[    2.413457] s2a: supplied by regulator-dummy
[    2.417936] s2a: Bringing 0uV into 800000-800000uV
[    2.422475] s2b: supplied by regulator-dummy
[    2.426907] s2b: Bringing 0uV into 800000-800000uV
[    2.432687] thermal thermal_zone0: failed to read out thermal zone (-110)
[    2.440308] hctosys: unable to open rtc device (rtc0)
[    2.452334] random: fast init done
[    2.453145] VFS: Mounted root (squashfs filesystem) readonly on device 31:12.
[    2.455465] Freeing unused kernel memory: 1024K
[    3.272978] random: crng init done
[    3.378271] init: Console is alive
[    3.378480] init: - watchdog -
[    5.702054] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    5.812046] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.814199] SCSI subsystem initialized
[    5.819989] libata version 3.00 loaded.
[    5.823108] ehci-platform: EHCI generic platform driver
[    5.825678] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    5.827561] ohci-platform: OHCI generic platform driver
[    5.961400] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    5.961495] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    5.966276] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[    5.973568] xhci-hcd xhci-hcd.0.auto: irq 106, io mem 0x11000000
[    5.982783] hub 1-0:1.0: USB hub found
[    5.988377] hub 1-0:1.0: 1 port detected
[    5.992037] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    5.995978] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    6.001206] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
[    6.008935] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.015780] hub 2-0:1.0: USB hub found
[    6.023759] hub 2-0:1.0: 1 port detected
[    6.027494] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    6.031333] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    6.036814] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[    6.044253] xhci-hcd xhci-hcd.1.auto: irq 107, io mem 0x10000000
[    6.053299] hub 3-0:1.0: USB hub found
[    6.059137] hub 3-0:1.0: 1 port detected
[    6.062926] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    6.066744] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    6.072037] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0  SuperSpeed
[    6.079761] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.086599] hub 4-0:1.0: USB hub found
[    6.094649] hub 4-0:1.0: 1 port detected
[    6.100713] usbcore: registered new interface driver usb-storage
[    6.102241] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    6.108758] init: - preinit -
[    8.430198] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
[    8.430909] dwmac1000: Master AXI performs any burst length
[    8.439157] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[    8.444617] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[    8.454056] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    9.512670] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[    9.512756] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   11.657604] mount_root: loading kmods from internal overlay
[   11.694276] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[   11.695971] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[   14.722611] jffs2: notice: (143) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (2 unchecked, 0 orphan) and 25 of xref (0 dead, 0 orphan) found.
[   14.724343] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   14.755380] block: extroot: not configured
[   15.090240] jffs2: notice: (141) jffs2_build_xattr_subsystem: complete building xattr subsystem, 2 of xdatum (2 unchecked, 0 orphan) and 25 of xref (0 dead, 0 orphan) found.
[   15.093743] mount_root: loading kmods from internal overlay
[   15.133255] kmodloader: loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[   15.139516] kmodloader: done loading kernel modules from /tmp/overlay/upper/etc/modules-boot.d/*
[   17.562984] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[   17.570248] block: extroot: not configured
[   17.615031] mount_root: switching to jffs2 overlay
[   17.654047] overlayfs: upper fs does not support tmpfile.
[   17.661764] urandom-seed: Seeding with /etc/urandom.seed
[   17.804991] procd: - early -
[   17.805129] procd: - watchdog -
[   18.510268] procd: - watchdog -
[   18.510565] procd: - ubus -
[   18.568227] procd: - init -
[   18.896766] kmodloader: loading kernel modules from /etc/modules.d/*
[   18.914059] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[   18.925512] tun: Universal TUN/TAP device driver, 1.6
[   18.929453] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   19.205124] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[   19.205149] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[   19.222136] batman_adv: B.A.T.M.A.N. advanced 2018.1 (compatibility version 15) loaded
[   19.227406] u32 classifier
[   19.228942]     input device check on
[   19.231653]     Actions configured
[   19.236548] Mirror/redirect action on
[   19.266502] Ebtables v2.0 registered
[   19.267459] hso: drivers/net/usb/hso.c: Option Wireless
[   19.269247] usbcore: registered new interface driver hso
[   19.275686] ip_tables: (C) 2000-2006 Netfilter Core Team
[   19.280508] usbcore: registered new interface driver ipheth
[   19.625566] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[   20.077153] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[   20.077303] usbcore: registered new interface driver pegasus
[   20.085400] usbcore: registered new interface driver r8152
[   20.091028] usbcore: registered new interface driver ums-alauda
[   20.096290] usbcore: registered new interface driver ums-cypress
[   20.101665] usbcore: registered new interface driver ums-datafab
[   20.107917] usbcore: registered new interface driver ums-freecom
[   20.113970] usbcore: registered new interface driver ums-isd200
[   20.119956] usbcore: registered new interface driver ums-jumpshot
[   20.125609] usbcore: registered new interface driver ums-karma
[   20.132071] usbcore: registered new interface driver ums-sddr09
[   20.137811] usbcore: registered new interface driver ums-sddr55
[   20.143650] usbcore: registered new interface driver ums-usbat
[   20.154432] usbcore: registered new interface driver usbserial
[   20.154520] usbcore: registered new interface driver usbserial_generic
[   20.159734] usbserial: USB Serial support registered for generic
[   20.182785] xt_time: kernel timezone is -0000
[   20.184618] usbcore: registered new interface driver asix
[   20.198895] ath10k_pci 0000:01:00.0: assign IRQ: got 66
[   20.198923] ath10k 4.13 driver, optimized for CT firmware, probing pci device: 0x40.
[   20.199762] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[   20.205956] ath10k_pci 0000:01:00.0: enabling bus mastering
[   20.206643] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   20.379562] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/fwcfg-pci-0000:01:00.0.txt failed with error -2
[   20.379603] ath10k_pci 0000:01:00.0: Falling back to user helper
[   20.423992] firmware ath10k!fwcfg-pci-0000:01:00.0.txt: firmware_loading_store: map pages failed
[   20.428612] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/ct-firmware-5.bin failed with error -2
[   20.431855] ath10k_pci 0000:01:00.0: Falling back to user helper
[   20.476074] firmware ath10k!QCA99X0!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[   20.476367] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/ct-firmware-2.bin failed with error -2
[   20.484421] ath10k_pci 0000:01:00.0: Falling back to user helper
[   20.527292] firmware ath10k!QCA99X0!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[   20.527581] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[   20.535613] ath10k_pci 0000:01:00.0: Falling back to user helper
[   20.578905] firmware ath10k!QCA99X0!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[   21.625618] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[   21.625660] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 0
[   21.636926] ath10k_pci 0000:01:00.0: firmware ver 10.4-ct-9980-fW-011-cf79c7f api 5 features peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,cust-stats-CT crc32 2da81174
[   21.700379] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:1 crc32 08fa09f2
[   22.885212] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[   22.885246] ath10k_pci 0000:01:00.0: msdu-desc: 2500  skid: 32
[   22.960692] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0'
[   22.961375] ath10k_pci 0000:01:00.0: wmi print 'free: 33100 iram: 16188 sram: 16448'
[   23.107646] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[   23.238723] ath: EEPROM regdomain: 0x0
[   23.238732] ath: EEPROM indicates default country code should be used
[   23.238738] ath: doing EEPROM country->regdmn map search
[   23.238749] ath: country maps to regdmn code: 0x3a
[   23.238757] ath: Country alpha2 being used: US
[   23.238763] ath: Regpair used: 0x3a
[   23.242227] ath10k_pci 0001:01:00.0: assign IRQ: got 99
[   23.242256] ath10k 4.13 driver, optimized for CT firmware, probing pci device: 0x40.
[   23.242996] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[   23.249159] ath10k_pci 0001:01:00.0: enabling bus mastering
[   23.249742] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[   23.424569] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/fwcfg-pci-0001:01:00.0.txt failed with error -2
[   23.424601] ath10k_pci 0001:01:00.0: Falling back to user helper
[   23.682485] firmware ath10k!fwcfg-pci-0001:01:00.0.txt: firmware_loading_store: map pages failed
[   24.244375] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/ct-firmware-5.bin failed with error -2
[   24.244413] ath10k_pci 0001:01:00.0: Falling back to user helper
[   24.281949] firmware ath10k!QCA99X0!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[   24.282221] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/ct-firmware-2.bin failed with error -2
[   24.290276] ath10k_pci 0001:01:00.0: Falling back to user helper
[   24.336129] firmware ath10k!QCA99X0!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[   24.336301] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[   24.344415] ath10k_pci 0001:01:00.0: Falling back to user helper
[   24.372388] firmware ath10k!QCA99X0!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[   24.372516] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[   24.380325] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 0
[   24.391587] ath10k_pci 0001:01:00.0: firmware ver 10.4-ct-9980-fW-011-cf79c7f api 5 features peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,cust-stats-CT crc32 2da81174
[   24.456893] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:2 crc32 08fa09f2
[   25.654094] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[   25.654124] ath10k_pci 0001:01:00.0: msdu-desc: 2500  skid: 32
[   25.731404] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0'
[   25.732097] ath10k_pci 0001:01:00.0: wmi print 'free: 33100 iram: 16188 sram: 16448'
[   25.883822] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[   26.018875] ath: EEPROM regdomain: 0x0
[   26.018883] ath: EEPROM indicates default country code should be used
[   26.018889] ath: doing EEPROM country->regdmn map search
[   26.018900] ath: country maps to regdmn code: 0x3a
[   26.018909] ath: Country alpha2 being used: US
[   26.018916] ath: Regpair used: 0x3a
[   26.023949] usbcore: registered new interface driver ax88179_178a
[   26.024910] usbcore: registered new interface driver cdc_eem
[   26.030572] usbcore: registered new interface driver cdc_ether
[   26.035524] usbcore: registered new interface driver cdc_subset
[   26.041094] usbcore: registered new interface driver dm9601
[   26.244372] usbcore: registered new interface driver ftdi_sio
[   26.244486] usbserial: USB Serial support registered for FTDI USB Serial Device
[   26.404454] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[   26.407221] usbcore: registered new interface driver pl2303
[   26.410969] usbserial: USB Serial support registered for pl2303
[   26.417646] usbcore: registered new interface driver rndis_host
[   26.423216] usbcore: registered new interface driver smsc95xx
[   26.428471] kmodloader: done loading kernel modules from /etc/modules.d/*
[   33.047486] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
[   33.048514] dwmac1000: Master AXI performs any burst length
[   33.056474] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[   33.061911] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[   33.071016] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   33.089550] br-client: port 1(eth1.1) entered blocking state
[   33.089584] br-client: port 1(eth1.1) entered disabled state
[   33.094592] device eth1.1 entered promiscuous mode
[   33.099915] device eth1 entered promiscuous mode
[   33.109958] IPv6: ADDRCONF(NETDEV_UP): br-client: link is not ready
[   33.309937] Generic PHY fixed-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:00, irq=POLL)
[   33.310949] dwmac1000: Master AXI performs any burst length
[   33.318925] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[   33.324449] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[   33.333988] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   33.348647] br-wan: port 1(eth0.2) entered blocking state
[   33.348687] br-wan: port 1(eth0.2) entered disabled state
[   33.353435] device eth0.2 entered promiscuous mode
[   33.358415] device eth0 entered promiscuous mode
[   33.372381] IPv6: ADDRCONF(NETDEV_UP): br-wan: link is not ready
[   33.384752] IPv6: ADDRCONF(NETDEV_UP): local-node: link is not ready
[   33.423784] IPv6: ADDRCONF(NETDEV_CHANGE): local-node: link becomes ready
[   33.447117] br-client: port 2(local-port) entered blocking state
[   33.447168] br-client: port 2(local-port) entered disabled state
[   33.500426] device local-port entered promiscuous mode
[   33.500618] br-client: port 2(local-port) entered blocking state
[   33.504568] br-client: port 2(local-port) entered forwarding state
[   33.580780] IPv6: ADDRCONF(NETDEV_CHANGE): br-client: link becomes ready
[   33.997404] batman_adv: bat0: Adding interface: primary0
[   33.997451] batman_adv: bat0: Interface activated: primary0
[   34.004229] 8021q: adding VLAN 0 to HW filter on device bat0
[   34.010240] br-client: port 3(bat0) entered blocking state
[   34.013126] br-client: port 3(bat0) entered disabled state
[   34.018522] device bat0 entered promiscuous mode
[   34.023907] br-client: port 3(bat0) entered blocking state
[   34.028520] br-client: port 3(bat0) entered forwarding state
[   34.152834] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[   34.210812] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   34.211658] br-client: port 1(eth1.1) entered blocking state
[   34.216007] br-client: port 1(eth1.1) entered forwarding state
[   34.227851] batman_adv: bat0: Interface deactivated: primary0
[   34.375345] IPv6: ADDRCONF(NETDEV_UP): primary0: link is not ready
[   34.377046] batman_adv: bat0: Interface activated: primary0
[   34.402783] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   34.402846] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   34.437607] br-wan: port 1(eth0.2) entered blocking state
[   34.437648] br-wan: port 1(eth0.2) entered forwarding state
[   34.468145] IPv6: ADDRCONF(NETDEV_CHANGE): br-wan: link becomes ready
[   34.509936] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
[   34.509975] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
[   34.617629] br-client: port 3(bat0) entered disabled state
[   34.617721] br-client: port 2(local-port) entered disabled state
[   34.622046] br-client: port 1(eth1.1) entered disabled state
[   34.658192] device bat0 left promiscuous mode
[   34.658281] br-client: port 3(bat0) entered disabled state
[   34.683422] device eth1.1 left promiscuous mode
[   34.683449] device eth1 left promiscuous mode
[   34.686880] br-client: port 1(eth1.1) entered disabled state
[   34.862903] IPv6: ADDRCONF(NETDEV_UP): eth1.1: link is not ready
[   35.012342] device local-port left promiscuous mode
[   35.012444] br-client: port 2(local-port) entered disabled state
[   35.072032] ath: EEPROM regdomain: 0x8114
[   35.072040] ath: EEPROM indicates we should expect a country code
[   35.072044] ath: doing EEPROM country->regdmn map search
[   35.072049] ath: country maps to regdmn code: 0x37
[   35.072056] ath: Country alpha2 being used: DE
[   35.072060] ath: Regpair used: 0x37
[   35.072067] ath: regdomain 0x8114 dynamically updated by user
[   35.072095] ath: EEPROM regdomain: 0x8114
[   35.072099] ath: EEPROM indicates we should expect a country code
[   35.072103] ath: doing EEPROM country->regdmn map search
[   35.072107] ath: country maps to regdmn code: 0x37
[   35.072111] ath: Country alpha2 being used: DE
[   35.072115] ath: Regpair used: 0x37
[   35.072119] ath: regdomain 0x8114 dynamically updated by user
[   35.074044] IPv6: ADDRCONF(NETDEV_UP): local-port: link is not ready
[   35.148664] br-client: port 1(bat0) entered blocking state
[   35.148700] br-client: port 1(bat0) entered disabled state
[   35.165607] device bat0 entered promiscuous mode
[   35.168363] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
[   35.170485] dwmac1000: Master AXI performs any burst length
[   35.179255] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[   35.184861] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[   35.193745] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   35.248563] br-client: port 2(eth1.1) entered blocking state
[   35.248593] br-client: port 2(eth1.1) entered disabled state
[   35.269526] device eth1.1 entered promiscuous mode
[   35.269552] device eth1 entered promiscuous mode
[   35.281250] br-client: port 3(local-port) entered blocking state
[   35.281281] br-client: port 3(local-port) entered disabled state
[   35.290841] device local-port entered promiscuous mode
[   35.293970] br-client: port 3(local-port) entered blocking state
[   35.297284] br-client: port 3(local-port) entered forwarding state
[   35.303576] br-client: port 1(bat0) entered blocking state
[   35.309429] br-client: port 1(bat0) entered forwarding state
[   35.315364] IPv6: ADDRCONF(NETDEV_UP): br-client: link is not ready
[   35.542820] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
[   35.542854] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
[   36.232799] IPv6: ADDRCONF(NETDEV_CHANGE): br-client: link becomes ready
[   36.233137] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[   36.238617] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   36.279706] br-client: port 2(eth1.1) entered blocking state
[   36.279745] br-client: port 2(eth1.1) entered forwarding state
[   38.286733] ath10k_pci 0001:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[   38.286765] ath10k_pci 0001:01:00.0: msdu-desc: 2500  skid: 32
[   38.363825] ath10k_pci 0001:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0'
[   38.364522] ath10k_pci 0001:01:00.0: wmi print 'free: 33100 iram: 16188 sram: 16448'
[   38.563887] batman_adv: bat0: Changing gw mode from: off to: client
[   38.564175] batman_adv: bat0: hop_penalty: Changing from: 30 to: 15
[   38.569428] batman_adv: bat0: multicast_fanout: Changing from: 1 to: 16
[   38.575908] batman_adv: bat0: New skb noflood mark: 0x00000004/0x00000004
[   38.582025] batman_adv: bat0: orig_interval: Changing from: 1000 to: 5000
[   38.647730] IPv6: ADDRCONF(NETDEV_UP): client1: link is not ready
[   39.285270] ath10k_pci 0001:01:00.0: NOTE:  Firmware DBGLOG output disabled in debug_mask: 0x10000000
[   40.041286] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16  peers: 48  tid: 96
[   40.041321] ath10k_pci 0000:01:00.0: msdu-desc: 2500  skid: 32
[   40.116721] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186  msdu-desc: 2500  sw-crypt: 0'
[   40.117386] ath10k_pci 0000:01:00.0: wmi print 'free: 33100 iram: 16188 sram: 16448'
[   40.381296] IPv6: ADDRCONF(NETDEV_UP): client0: link is not ready
[   40.385983] br-client: port 4(client1) entered blocking state
[   40.386392] br-client: port 4(client1) entered disabled state
[   40.392967] device client1 entered promiscuous mode
[   40.407608] br-client: port 5(client0) entered blocking state
[   40.407639] br-client: port 5(client0) entered disabled state
[   40.412788] device client0 entered promiscuous mode
[   40.854840] IPv6: ADDRCONF(NETDEV_CHANGE): client0: link becomes ready
[   40.855076] br-client: port 5(client0) entered blocking state
[   40.860290] br-client: port 5(client0) entered forwarding state
[   41.264106] batman_adv: bat0: Adding interface: mesh-vpn
[   41.264136] batman_adv: bat0: The MTU of interface mesh-vpn is too small (1312) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   41.270293] batman_adv: bat0: Interface activated: mesh-vpn
[   41.293681] IPv6: ADDRCONF(NETDEV_CHANGE): client1: link becomes ready
[   41.298211] br-client: port 4(client1) entered blocking state
[   41.304709] br-client: port 4(client1) entered forwarding state
[   41.489276] IPv6: ADDRCONF(NETDEV_UP): mesh0: link is not ready
[   41.518477] IPv6: ADDRCONF(NETDEV_UP): mesh1: link is not ready
[   42.035921] IPv6: ADDRCONF(NETDEV_CHANGE): mesh0: link becomes ready
[   42.326236] IPv6: ADDRCONF(NETDEV_CHANGE): mesh1: link becomes ready
[   42.769864] batman_adv: bat0: Adding interface: mesh0
[   42.769897] batman_adv: bat0: Interface activated: mesh0
[   42.808278] batman_adv: bat0: Adding interface: mesh1
[   42.808307] batman_adv: bat0: Interface activated: mesh1
[   45.383154] batman_adv: bat0: IGMP Querier appeared
[   45.383199] batman_adv: bat0: MLD Querier appeared
[   65.114428] NOHZ: local_softirq_pending 08
[   85.594090] NOHZ: local_softirq_pending 08
[  126.554208] NOHZ: local_softirq_pending 08
[  147.034639] NOHZ: local_softirq_pending 08
[  167.514881] NOHZ: local_softirq_pending 08
[  187.994455] NOHZ: local_softirq_pending 08
[  208.475166] NOHZ: local_softirq_pending 08
[  228.955785] NOHZ: local_softirq_pending 08
[  310.876933] NOHZ: local_softirq_pending 08
[  331.356959] NOHZ: local_softirq_pending 08

/etc/config/wireless

config wifi-device 'radio0'
	option type 'mac80211'
	option hwmode '11a'
	option path 'soc/1b500000.pci/pci0000:00/0000:00:00.0/0000:01:00.0'
	option htmode 'VHT20'
	option country 'DE'
	option channel '48'

config wifi-device 'radio1'
	option type 'mac80211'
	option hwmode '11g'
	option path 'soc/1b700000.pci/pci0001:00/0001:00:00.0/0001:01:00.0'
	option htmode 'HT20'
	option country 'DE'
	option channel '5'
	list supported_rates '6000'
	list supported_rates '9000'
	list supported_rates '12000'
	list supported_rates '18000'
	list supported_rates '24000'
	list supported_rates '36000'
	list supported_rates '48000'
	list supported_rates '54000'
	list basic_rate '6000'
	list basic_rate '9000'
	list basic_rate '18000'
	list basic_rate '36000'
	list basic_rate '54000'

config wifi-iface 'mesh_radio0'
	option ifname 'mesh0'
	option network 'mesh_radio0'
	option device 'radio0'
	option mesh_fwding '0'
	option mesh_id 'ffda-mesh-dom1'
	option mcast_rate '12000'
	option mode 'mesh'
	option disabled '0'
	option macaddr '4e:f4:24:d7:d9:d9'

config wifi-iface 'mesh_radio1'
	option ifname 'mesh1'
	option network 'mesh_radio1'
	option device 'radio1'
	option mesh_fwding '0'
	option mesh_id 'ffda-mesh-dom1'
	option mcast_rate '12000'
	option mode 'mesh'
	option disabled '0'
	option macaddr '4e:f4:24:d7:d9:dd'

config wifi-iface 'client_radio0'
	option ifname 'client0'
	option network 'client'
	option disabled '0'
	option device 'radio0'
	option mode 'ap'
	option macaddr '4e:f4:24:d7:d9:d8'
	option ssid 'darmstadt.freifunk.net'

config wifi-iface 'client_radio1'
	option ifname 'client1'
	option network 'client'
	option disabled '0'
	option device 'radio1'
	option mode 'ap'
	option macaddr 'ec:08:6b:24:c2:54'
	option ssid 'darmstadt.freifunk.net'

non-ct

logread

Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000000] Booting Linux on physical CPU 0x0
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    0.000000] Linux version 4.14.54 (hexa@build.ffda.io) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7156+7-a297324a13)) #0 SMP Thu Apr 12 05:50:02 2018
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000000] CPU: div instructions available: patching division code
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000000] OF: fdt: Machine model: TP-Link Archer C2600
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000000] Memory policy: Data cache writealloc
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.000000] On node 0 totalpages: 122880
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.000000] free_area_init_node: node 0, pgdat c0b27b00, node_mem_map ddc39000
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.000000]   Normal zone: 960 pages used for memmap
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.000000]   Normal zone: 0 pages reserved
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.000000]   Normal zone: 122880 pages, LIFO batch:31
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x88/0x40c with crng_init=0
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000000] percpu: Embedded 15 pages/cpu @ddc01000 s29324 r8192 d23924 u61440
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.000000] pcpu-alloc: s29324 r8192 d23924 u61440 alloc=15*4096
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.000000] pcpu-alloc: [0] 0 [0] 1
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 121920
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    0.000000] Kernel command line:
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8 root=mtd:rootfs rootfstype=squashfs
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000000] Memory: 478384K/491520K available (4832K kernel code, 161K rwdata, 1280K rodata, 1024K init, 250K bss, 13136K reserved, 0K cma-reserved, 0K highmem)
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    0.000000] Virtual kernel memory layout:
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    0.000000]     vmalloc : 0xde800000 - 0xff800000   ( 528 MB)
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xde000000   ( 480 MB)
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    0.000000]       .text : 0xc0208000 - 0xc07b80f0   (5825 kB)
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    0.000000]       .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    0.000000]       .data : 0xc0b00000 - 0xc0b28400   ( 161 kB)
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    0.000000]        .bss : 0xc0b2a000 - 0xc0b68aec   ( 251 kB)
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000000] Hierarchical RCU implementation.
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000020] Switching to timer-based delay loop, resolution 160ns
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000238] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000259] pid_max: default: 32768 minimum: 301
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000381] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000398] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.000962] CPU: Testing write buffer coherency: ok
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.001690] Setting up static identity map for 0x42300000 - 0x42300060
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.001842] Hierarchical SRCU implementation.
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.002560] smp: Bringing up secondary CPUs ...
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.004333] smp: Brought up 1 node, 2 CPUs
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.004348] SMP: Total of 2 processors activated (25.00 BogoMIPS).
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.004358] CPU: All CPU(s) started in SVC mode.
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.015250] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.015409] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.015432] futex hash table entries: 512 (order: 3, 32768 bytes)
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.015545] pinctrl core: initialized pinctrl subsystem
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.016523] NET: Registered protocol family 16
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.016761] DMA: preallocated 256 KiB pool for atomic coherent allocations
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.018106] cpuidle: using governor ladder
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.018170] cpuidle: using governor menu
Thu Apr 12 08:00:02 2018 kern.err kernel: [    0.038807] msm_bus_fabric_init_driver
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.040198] usbcore: registered new interface driver usbfs
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.040287] usbcore: registered new interface driver hub
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.040383] usbcore: registered new device driver usb
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.040439] pps_core: LinuxPPS API ver. 1 registered
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.040452] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.040484] PTP clock support registered
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.042334] clocksource: Switched to clocksource dg_timer
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.045581] NET: Registered protocol family 2
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.046172] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.046216] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.046268] TCP: Hash tables configured (established 4096 bind 4096)
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.046359] UDP hash table entries: 256 (order: 1, 8192 bytes)
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.046385] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.046540] NET: Registered protocol family 1
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.046587] PCI: CLS 0 bytes, default 64
Thu Apr 12 08:00:02 2018 kern.warn kernel: [    0.047698] No memory allocated for crashlog
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.047931] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.053018] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.053034] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.061236] io scheduler noop registered
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.061253] io scheduler deadline registered (default)
Thu Apr 12 08:00:02 2018 kern.warn kernel: [    0.062918] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
Thu Apr 12 08:00:02 2018 kern.warn kernel: [    0.063036] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
Thu Apr 12 08:00:02 2018 kern.warn kernel: [    0.063131] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.063960] OF: PCI: host bridge /soc/pci@1b500000 ranges:
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.064002] OF: PCI:    IO 0x0fe00000..0x0fefffff -> 0x0fe00000
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.064027] OF: PCI:   MEM 0x08000000..0x0fdfffff -> 0x08000000
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.172149] qcom-pcie 1b500000.pci: link up
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.172321] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.172344] pci_bus 0000:00: root bus resource [bus 00-ff]
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.172363] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.172378] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.172394] pci_bus 0000:00: scanning bus
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.172526] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.172623] pci 0000:00:00.0: calling pci_fixup_ide_bases+0x0/0x44
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.172697] pci 0000:00:00.0: supports D1
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.172707] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.172723] pci 0000:00:00.0: PME# disabled
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.172979] pci_bus 0000:00: fixups for bus
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.173003] PCI: bus0: Fast back to back transfers disabled
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.173021] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.173144] pci_bus 0000:01: scanning bus
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.173319] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.173668] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.174136] pci 0000:01:00.0: calling pci_fixup_ide_bases+0x0/0x44
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.174778] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.174818] pci 0000:01:00.0: PME# disabled
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.175152] pci_bus 0000:01: fixups for bus
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.175223] PCI: bus1: Fast back to back transfers disabled
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.175237] pci_bus 0000:01: bus scan returning with max=01
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.175254] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.175271] pci_bus 0000:00: bus scan returning with max=ff
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.175320] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.175344] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.175473] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.175497] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x081fffff]
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.175533] pci 0000:00:00.0: calling qcom_pcie_fixup_final+0x0/0x94
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.175727] pcieport 0000:00:00.0: assign IRQ: got 66
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.176051] pcieport 0000:00:00.0: AER enabled with IRQ 34
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.176172] pci 0000:01:00.0: calling qcom_pcie_fixup_final+0x0/0x94
Thu Apr 12 08:00:02 2018 kern.warn kernel: [    0.176611] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
Thu Apr 12 08:00:02 2018 kern.warn kernel: [    0.176707] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
Thu Apr 12 08:00:02 2018 kern.warn kernel: [    0.176813] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.177618] OF: PCI: host bridge /soc/pci@1b700000 ranges:
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.177653] OF: PCI:    IO 0x31e00000..0x31efffff -> 0x31e00000
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.177676] OF: PCI:   MEM 0x2e000000..0x31dfffff -> 0x2e000000
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.287577] qcom-pcie 1b700000.pci: link up
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.287732] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.287750] pci_bus 0001:00: root bus resource [bus 00-ff]
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.287764] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.287777] pci_bus 0001:00: scanning bus
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.287816] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.287890] pci 0001:00:00.0: calling pci_fixup_ide_bases+0x0/0x44
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.287953] pci 0001:00:00.0: supports D1
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.287962] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.287976] pci 0001:00:00.0: PME# disabled
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.288217] pci_bus 0001:00: fixups for bus
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.288236] PCI: bus0: Fast back to back transfers disabled
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.288252] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.288370] pci_bus 0001:01: scanning bus
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.288557] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.288929] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.289431] pci 0001:01:00.0: calling pci_fixup_ide_bases+0x0/0x44
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.290122] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.290166] pci 0001:01:00.0: PME# disabled
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.290507] pci_bus 0001:01: fixups for bus
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.290582] PCI: bus1: Fast back to back transfers disabled
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.290597] pci_bus 0001:01: bus scan returning with max=01
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.290612] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.290629] pci_bus 0001:00: bus scan returning with max=ff
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.290666] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.290687] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.290819] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.290840] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e1fffff]
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.290873] pci 0001:00:00.0: calling qcom_pcie_fixup_final+0x0/0x94
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.291054] pcieport 0001:00:00.0: assign IRQ: got 99
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.291352] pcieport 0001:00:00.0: AER enabled with IRQ 67
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    0.291464] pci 0001:01:00.0: calling qcom_pcie_fixup_final+0x0/0x94
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.293741] L2 @ QSB rate. Forcing new rate.
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.293957] L2 @ 384000 KHz
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.294124] CPU0 @ 800000 KHz
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.294137] CPU1 @ QSB rate. Forcing new rate.
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.294257] CPU1 @ 384000 KHz
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.298215] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.299620] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.301065] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.303846] msm_serial 16340000.serial: msm_serial: detected port #0
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.303955] msm_serial 16340000.serial: uartclk = 7372800
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.304038] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 100, base_baud = 460800) is a MSM
Thu Apr 12 08:00:02 2018 kern.info kernel: [    0.304072] msm_serial: console setup on port #0
Thu Apr 12 08:00:02 2018 kern.info kernel: [    1.034326] console [ttyMSM0] enabled
Thu Apr 12 08:00:02 2018 kern.info kernel: [    1.039021] msm_serial: driver initialized
Thu Apr 12 08:00:02 2018 kern.info kernel: [    1.047702] loop: module loaded
Thu Apr 12 08:00:02 2018 kern.info kernel: [    1.049199] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
Thu Apr 12 08:00:02 2018 kern.info kernel: [    1.051118] m25p80 spi0.0: mx25u25635f (32768 Kbytes)
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.057292] 25 fixed-partitions partitions found on MTD device spi0.0
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.061980] Creating 25 MTD partitions on "spi0.0":
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.068489] 0x000000000000-0x000000020000 : "SBL1"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.074026] 0x000000020000-0x000000040000 : "MIBIB"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.078681] 0x000000040000-0x000000060000 : "SBL2"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.083542] 0x000000060000-0x000000090000 : "SBL3"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.088311] 0x000000090000-0x0000000a0000 : "DDRCONFIG"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.093172] 0x0000000a0000-0x0000000b0000 : "SSD"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.098217] 0x0000000b0000-0x0000000e0000 : "TZ"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.103170] 0x0000000e0000-0x000000100000 : "RPM"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.107752] 0x000000100000-0x000000170000 : "fs-uboot"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.112363] 0x000000170000-0x0000001b0000 : "uboot-env"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.117488] 0x0000001b0000-0x0000001f0000 : "radio"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.122527] 0x0000001f0000-0x0000005f0000 : "os-image"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.127460] 0x0000005f0000-0x000001ef0000 : "rootfs"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.132644] mtd: device 12 (rootfs) set to be root filesystem
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.137766] 1 squashfs-split partitions found on MTD device rootfs
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.142779] 0x000000970000-0x000001ef0000 : "rootfs_data"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.149974] 0x000001ef0000-0x000001ef0200 : "default-mac"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.155409] 0x000001ef0200-0x000001ef0400 : "pin"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.160652] 0x000001ef0400-0x000001f00000 : "product-info"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.165447] 0x000001f00000-0x000001f10000 : "partition-table"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.170718] 0x000001f10000-0x000001f20000 : "soft-version"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.176682] 0x000001f20000-0x000001f30000 : "support-list"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.181922] 0x000001f30000-0x000001f40000 : "profile"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.187534] 0x000001f40000-0x000001f50000 : "default-config"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.192495] 0x000001f50000-0x000001f90000 : "user-config"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.198337] 0x000001f90000-0x000001fd0000 : "qos-db"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.203662] 0x000001fd0000-0x000001fe0000 : "usb-config"
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    1.208594] 0x000001fe0000-0x000002000000 : "log"
Thu Apr 12 08:00:02 2018 kern.info kernel: [    1.215378] libphy: GPIO Bitbanged MDIO: probed
Thu Apr 12 08:00:02 2018 kern.info kernel: [    1.242264] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.144777] libphy: Fixed MDIO Bus: probed
Thu Apr 12 08:00:02 2018 kern.warn kernel: [    2.147316] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.148219] stmmac - user ID: 0x10, Synopsys ID: 0x37
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.154379] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.159329] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.165485] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.173480] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.180941] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.188081] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.195942] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.201686] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.209161] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
Thu Apr 12 08:00:02 2018 kern.warn kernel: [    2.218463] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.224809] stmmac - user ID: 0x10, Synopsys ID: 0x37
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.230766] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.235901] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.241880] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.249956] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.257495] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.264547] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.272344] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.278258] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.285633] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.293353] i2c /dev entries driver
Thu Apr 12 08:00:02 2018 kern.err kernel: [    2.302121] Calibration not found.
Thu Apr 12 08:00:02 2018 kern.err kernel: [    2.304194] qcom-tsens 900000.thermal-sensor: tsens calibration failed
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.309247] Speed bin: 0
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.314198] PVS bin: 1
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    2.318590] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    2.319052] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.326951] sdhci: Secure Digital Host Controller Interface driver
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.333546] sdhci: Copyright(c) Pierre Ossman
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.339698] sdhci-pltfm: SDHCI platform and OF driver helper
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.346678] NET: Registered protocol family 10
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.351983] Segment Routing with IPv6
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.354351] NET: Registered protocol family 17
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.357919] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.362805] 8021q: 802.1Q VLAN Support v1.8
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    2.375446] Registering SWP/SWPB emulation handler
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.396339] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.410146] s1a: supplied by regulator-dummy
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.410266] s1a: Bringing 0uV into 1050000-1050000uV
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.414005] s1b: supplied by regulator-dummy
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.418512] s1b: Bringing 0uV into 1050000-1050000uV
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.423205] s2a: supplied by regulator-dummy
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.427715] s2a: Bringing 0uV into 800000-800000uV
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.432251] s2b: supplied by regulator-dummy
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.436685] s2b: Bringing 0uV into 800000-800000uV
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.447060] hctosys: unable to open rtc device (rtc0)
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    2.456384] random: fast init done
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.457088] VFS: Mounted root (squashfs filesystem) readonly on device 31:12.
Thu Apr 12 08:00:02 2018 kern.info kernel: [    2.459489] Freeing unused kernel memory: 1024K
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    3.255983] random: crng init done
Thu Apr 12 08:00:02 2018 user.info kernel: [    3.412989] init: Console is alive
Thu Apr 12 08:00:02 2018 user.info kernel: [    3.413123] init: - watchdog -
Thu Apr 12 08:00:02 2018 user.info kernel: [    5.954409] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.028292] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Thu Apr 12 08:00:02 2018 kern.notice kernel: [    6.030402] SCSI subsystem initialized
Thu Apr 12 08:00:02 2018 kern.debug kernel: [    6.036363] libata version 3.00 loaded.
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.039499] ehci-platform: EHCI generic platform driver
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.042166] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.044052] ohci-platform: OHCI generic platform driver
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.181693] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.181772] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.186478] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.193801] xhci-hcd xhci-hcd.0.auto: irq 106, io mem 0x11000000
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.203079] hub 1-0:1.0: USB hub found
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.208676] hub 1-0:1.0: 1 port detected
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.212327] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.216283] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.221494] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.229209] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.236064] hub 2-0:1.0: USB hub found
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.244069] hub 2-0:1.0: 1 port detected
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.247784] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.251622] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.257125] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.264559] xhci-hcd xhci-hcd.1.auto: irq 107, io mem 0x10000000
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.273636] hub 3-0:1.0: USB hub found
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.279430] hub 3-0:1.0: 1 port detected
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.283196] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.287035] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.292328] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0  SuperSpeed
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.300013] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.306918] hub 4-0:1.0: USB hub found
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.314928] hub 4-0:1.0: 1 port detected
Thu Apr 12 08:00:02 2018 kern.info kernel: [    6.321037] usbcore: registered new interface driver usb-storage
Thu Apr 12 08:00:02 2018 user.info kernel: [    6.322535] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Thu Apr 12 08:00:02 2018 user.info kernel: [    6.331783] init: - preinit -
Thu Apr 12 08:00:02 2018 kern.info kernel: [    8.521334] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
Thu Apr 12 08:00:02 2018 kern.info kernel: [    8.522043] dwmac1000: Master AXI performs any burst length
Thu Apr 12 08:00:02 2018 kern.info kernel: [    8.530327] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Thu Apr 12 08:00:02 2018 kern.info kernel: [    8.535775] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Thu Apr 12 08:00:02 2018 kern.info kernel: [    8.545229] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Thu Apr 12 08:00:02 2018 kern.info kernel: [    9.593343] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
Thu Apr 12 08:00:02 2018 kern.info kernel: [    9.595188] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Thu Apr 12 08:00:02 2018 user.info kernel: [   11.718892] mount_root: loading kmods from internal overlay
Thu Apr 12 08:00:02 2018 user.info kernel: [   11.754528] kmodloader: loading kernel modules from //etc/modules-boot.d/*
Thu Apr 12 08:00:02 2018 user.info kernel: [   11.756090] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
Thu Apr 12 08:00:02 2018 kern.warn kernel: [   14.055176] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
Thu Apr 12 08:00:02 2018 kern.warn kernel: [   14.055223] jffs2_build_filesystem(): unlocking the mtd device...
Thu Apr 12 08:00:02 2018 kern.warn kernel: [   14.055227] done.
Thu Apr 12 08:00:02 2018 kern.warn kernel: [   14.067512] jffs2_build_filesystem(): erasing all blocks after the end marker...
Thu Apr 12 08:00:02 2018 kern.warn kernel: [  192.640147] done.
Thu Apr 12 08:00:02 2018 kern.notice kernel: [  192.646699] jffs2: notice: (143) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Apr 12 08:00:02 2018 user.info kernel: [  192.649647] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Apr 12 08:00:02 2018 user.err kernel: [  192.664194] block: unable to load configuration (fstab: Entry not found)
Thu Apr 12 08:00:02 2018 user.info kernel: [  192.670723] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
Thu Apr 12 08:00:02 2018 user.err kernel: [  192.677762] block: unable to load configuration (fstab: Entry not found)
Thu Apr 12 08:00:02 2018 user.info kernel: [  192.683990] block: attempting to load /etc/config/fstab
Thu Apr 12 08:00:02 2018 user.err kernel: [  192.692412] block: unable to load configuration (fstab: Entry not found)
Thu Apr 12 08:00:02 2018 user.err kernel: [  192.695693] block: no usable configuration
Thu Apr 12 08:00:02 2018 kern.notice kernel: [  193.138298] jffs2: notice: (141) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Thu Apr 12 08:00:02 2018 user.info kernel: [  195.190268] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
Thu Apr 12 08:00:02 2018 user.err kernel: [  195.190358] block: unable to load configuration (fstab: Entry not found)
Thu Apr 12 08:00:02 2018 user.info kernel: [  195.196176] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
Thu Apr 12 08:00:02 2018 user.err kernel: [  195.203037] block: unable to load configuration (fstab: Entry not found)
Thu Apr 12 08:00:02 2018 user.info kernel: [  195.209254] block: attempting to load /etc/config/fstab
Thu Apr 12 08:00:02 2018 user.err kernel: [  195.216044] block: unable to load configuration (fstab: Entry not found)
Thu Apr 12 08:00:02 2018 user.err kernel: [  195.220883] block: no usable configuration
Thu Apr 12 08:00:02 2018 user.info kernel: [  195.277363] mount_root: overlay filesystem has not been fully initialized yet
Thu Apr 12 08:00:02 2018 user.info kernel: [  195.281282] mount_root: switching to jffs2 overlay
Thu Apr 12 08:00:02 2018 kern.warn kernel: [  195.317201] overlayfs: upper fs does not support tmpfile.
Thu Apr 12 08:00:02 2018 user.warn kernel: [  196.168079] urandom-seed: Seed file not found (/etc/urandom.seed)
Thu Apr 12 08:00:02 2018 user.info kernel: [  196.302316] procd: - early -
Thu Apr 12 08:00:02 2018 user.info kernel: [  196.302492] procd: - watchdog -
Thu Apr 12 08:00:02 2018 user.info kernel: [  196.976305] procd: - watchdog -
Thu Apr 12 08:00:02 2018 user.info kernel: [  196.976646] procd: - ubus -
Thu Apr 12 08:00:02 2018 user.info kernel: [  197.030046] procd: - init -
Thu Apr 12 08:00:02 2018 user.info kernel: [  197.253232] kmodloader: loading kernel modules from /etc/modules.d/*
Thu Apr 12 08:00:02 2018 kern.info kernel: [  197.266243] ntfs: driver 2.1.32 [Flags: R/O MODULE].
Thu Apr 12 08:00:02 2018 kern.info kernel: [  197.271012] tun: Universal TUN/TAP device driver, 1.6
Thu Apr 12 08:00:02 2018 kern.info kernel: [  197.277797] ip6_tables: (C) 2000-2006 Netfilter Core Team
Thu Apr 12 08:00:02 2018 kern.info kernel: [  197.556976] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Thu Apr 12 08:00:02 2018 kern.info kernel: [  197.557011] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Thu Apr 12 08:00:02 2018 kern.info kernel: [  197.572245] batman_adv: B.A.T.M.A.N. advanced 2018.1 (compatibility version 15) loaded
Thu Apr 12 08:00:02 2018 kern.info kernel: [  197.576086] u32 classifier
Thu Apr 12 08:00:02 2018 kern.info kernel: [  197.579042]     input device check on
Thu Apr 12 08:00:02 2018 kern.info kernel: [  197.581735]     Actions configured
Thu Apr 12 08:00:02 2018 kern.info kernel: [  197.586604] Mirror/redirect action on
Thu Apr 12 08:00:02 2018 kern.info kernel: [  197.603502] Ebtables v2.0 registered
Thu Apr 12 08:00:02 2018 kern.info kernel: [  197.604189] hso: drivers/net/usb/hso.c: Option Wireless
Thu Apr 12 08:00:02 2018 kern.info kernel: [  197.606216] usbcore: registered new interface driver hso
Thu Apr 12 08:00:02 2018 kern.info kernel: [  197.612085] ip_tables: (C) 2000-2006 Netfilter Core Team
Thu Apr 12 08:00:02 2018 kern.info kernel: [  197.617360] usbcore: registered new interface driver ipheth
Thu Apr 12 08:00:02 2018 kern.info kernel: [  197.928305] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.154558] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.154760] usbcore: registered new interface driver pegasus
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.163124] usbcore: registered new interface driver r8152
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.168610] usbcore: registered new interface driver ums-alauda
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.173875] usbcore: registered new interface driver ums-cypress
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.178658] usbcore: registered new interface driver ums-datafab
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.184719] usbcore: registered new interface driver ums-freecom
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.190690] usbcore: registered new interface driver ums-isd200
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.196804] usbcore: registered new interface driver ums-jumpshot
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.202301] usbcore: registered new interface driver ums-karma
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.208816] usbcore: registered new interface driver ums-sddr09
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.214465] usbcore: registered new interface driver ums-sddr55
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.220217] usbcore: registered new interface driver ums-usbat
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.228738] usbcore: registered new interface driver usbserial
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.231294] usbcore: registered new interface driver usbserial_generic
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.237189] usbserial: USB Serial support registered for generic
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.251756] xt_time: kernel timezone is -0000
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.252523] usbcore: registered new interface driver asix
Thu Apr 12 08:00:02 2018 kern.debug kernel: [  198.261099] ath10k_pci 0000:01:00.0: assign IRQ: got 66
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.261661] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
Thu Apr 12 08:00:02 2018 kern.debug kernel: [  198.261744] ath10k_pci 0000:01:00.0: enabling bus mastering
Thu Apr 12 08:00:02 2018 kern.info kernel: [  198.262207] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Thu Apr 12 08:00:02 2018 kern.warn kernel: [  198.435310] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
Thu Apr 12 08:00:02 2018 kern.warn kernel: [  198.435355] ath10k_pci 0000:01:00.0: Falling back to user helper
Thu Apr 12 08:00:02 2018 kern.warn kernel: [  226.786177] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Thu Apr 12 08:00:02 2018 kern.warn kernel: [  226.786216] ath10k_pci 0000:01:00.0: Falling back to user helper
Thu Apr 12 08:00:02 2018 kern.err kernel: [  226.831922] firmware ath10k!QCA99X0!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
Thu Apr 12 08:00:02 2018 kern.info kernel: [  227.435578] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
Thu Apr 12 08:00:02 2018 kern.info kernel: [  227.435616] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 1
Thu Apr 12 08:00:02 2018 kern.info kernel: [  227.445726] ath10k_pci 0000:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
Thu Apr 12 08:00:02 2018 kern.info kernel: [  227.508485] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:1 crc32 08fa09f2
Thu Apr 12 08:00:02 2018 kern.info kernel: [  228.772296] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
Thu Apr 12 08:00:02 2018 kern.debug kernel: [  228.855048] ath: EEPROM regdomain: 0x0
Thu Apr 12 08:00:02 2018 kern.debug kernel: [  228.855058] ath: EEPROM indicates default country code should be used
Thu Apr 12 08:00:02 2018 kern.debug kernel: [  228.855066] ath: doing EEPROM country->regdmn map search
Thu Apr 12 08:00:02 2018 kern.debug kernel: [  228.855079] ath: country maps to regdmn code: 0x3a
Thu Apr 12 08:00:02 2018 kern.debug kernel: [  228.855090] ath: Country alpha2 being used: US
Thu Apr 12 08:00:02 2018 kern.debug kernel: [  228.855099] ath: Regpair used: 0x3a
Thu Apr 12 08:00:02 2018 kern.debug kernel: [  228.858855] ath10k_pci 0001:01:00.0: assign IRQ: got 99
Thu Apr 12 08:00:02 2018 kern.info kernel: [  228.859677] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
Thu Apr 12 08:00:02 2018 kern.debug kernel: [  228.859800] ath10k_pci 0001:01:00.0: enabling bus mastering
Thu Apr 12 08:00:02 2018 kern.info kernel: [  228.860455] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
Thu Apr 12 08:00:02 2018 kern.warn kernel: [  229.034256] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2
Thu Apr 12 08:00:02 2018 kern.warn kernel: [  229.034294] ath10k_pci 0001:01:00.0: Falling back to user helper
Thu Apr 12 08:00:02 2018 kern.warn kernel: [  261.160751] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
Thu Apr 12 08:00:02 2018 kern.warn kernel: [  261.160790] ath10k_pci 0001:01:00.0: Falling back to user helper
Thu Apr 12 08:00:02 2018 kern.err kernel: [  261.205298] firmware ath10k!QCA99X0!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
Thu Apr 12 08:00:02 2018 kern.info kernel: [  261.205544] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
Thu Apr 12 08:00:02 2018 kern.info kernel: [  261.213298] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 1
Thu Apr 12 08:00:02 2018 kern.info kernel: [  261.225303] ath10k_pci 0001:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
Thu Apr 12 08:00:02 2018 kern.info kernel: [  261.288035] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:2 crc32 08fa09f2
Thu Apr 12 08:00:02 2018 kern.info kernel: [  262.568127] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
Thu Apr 12 08:00:02 2018 kern.debug kernel: [  262.655310] ath: EEPROM regdomain: 0x0
Thu Apr 12 08:00:02 2018 kern.debug kernel: [  262.655319] ath: EEPROM indicates default country code should be used
Thu Apr 12 08:00:02 2018 kern.debug kernel: [  262.655326] ath: doing EEPROM country->regdmn map search
Thu Apr 12 08:00:02 2018 kern.debug kernel: [  262.655338] ath: country maps to regdmn code: 0x3a
Thu Apr 12 08:00:02 2018 kern.debug kernel: [  262.655348] ath: Country alpha2 being used: US
Thu Apr 12 08:00:02 2018 kern.debug kernel: [  262.655354] ath: Regpair used: 0x3a
Thu Apr 12 08:00:02 2018 kern.info kernel: [  262.660741] usbcore: registered new interface driver ax88179_178a
Thu Apr 12 08:00:02 2018 kern.info kernel: [  262.661924] usbcore: registered new interface driver cdc_eem
Thu Apr 12 08:00:02 2018 kern.info kernel: [  262.667888] usbcore: registered new interface driver cdc_ether
Thu Apr 12 08:00:02 2018 kern.info kernel: [  262.672774] usbcore: registered new interface driver cdc_subset
Thu Apr 12 08:00:02 2018 kern.info kernel: [  262.677878] usbcore: registered new interface driver dm9601
Thu Apr 12 08:00:02 2018 kern.info kernel: [  262.944184] usbcore: registered new interface driver ftdi_sio
Thu Apr 12 08:00:02 2018 kern.info kernel: [  262.944284] usbserial: USB Serial support registered for FTDI USB Serial Device
Thu Apr 12 08:00:02 2018 kern.info kernel: [  263.074091] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
Thu Apr 12 08:00:02 2018 kern.info kernel: [  263.076819] usbcore: registered new interface driver pl2303
Thu Apr 12 08:00:02 2018 kern.info kernel: [  263.080640] usbserial: USB Serial support registered for pl2303
Thu Apr 12 08:00:02 2018 kern.info kernel: [  263.087877] usbcore: registered new interface driver rndis_host
Thu Apr 12 08:00:02 2018 kern.info kernel: [  263.093313] usbcore: registered new interface driver smsc95xx
Thu Apr 12 08:00:02 2018 user.info kernel: [  263.097818] kmodloader: done loading kernel modules from /etc/modules.d/*
Thu Apr 12 08:00:02 2018 daemon.notice haveged: haveged starting up
Thu Apr 12 08:00:03 2018 daemon.notice procd: /etc/rc.d/S19dnsmasq: Command failed: Not found
Thu Apr 12 08:00:03 2018 daemon.notice procd: /etc/rc.d/S19dnsmasq: Failed to parse json data: unexpected end of data
Thu Apr 12 08:00:03 2018 daemon.notice procd: /etc/rc.d/S19dnsmasq: Command failed: Not found
Thu Apr 12 08:00:03 2018 daemon.notice procd: /etc/rc.d/S19dnsmasq: Failed to parse json data: unexpected end of data
Thu Apr 12 08:00:03 2018 daemon.notice procd: /etc/rc.d/S19dnsmasq: Command failed: Not found
Thu Apr 12 08:00:03 2018 daemon.notice procd: /etc/rc.d/S19dnsmasq: Failed to parse json data: unexpected end of data
Thu Apr 12 08:00:03 2018 daemon.notice procd: /etc/rc.d/S19dnsmasq: Command failed: Not found
Thu Apr 12 08:00:03 2018 daemon.notice procd: /etc/rc.d/S19dnsmasq: Failed to parse json data: unexpected end of data
Thu Apr 12 08:00:03 2018 daemon.info dnsmasq[962]: started, version 2.80test2 cachesize 150
Thu Apr 12 08:00:03 2018 daemon.info dnsmasq[962]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Apr 12 08:00:03 2018 daemon.info dnsmasq[962]: using nameserver fd01:67c:2ed8:a::56:1#53
Thu Apr 12 08:00:03 2018 daemon.info dnsmasq[962]: using nameserver fd01:67c:2ed8:a::55:1#53
Thu Apr 12 08:00:03 2018 daemon.info dnsmasq[962]: using local addresses only for domain lan
Thu Apr 12 08:00:03 2018 daemon.warn dnsmasq[962]: no servers found in /tmp/resolv.conf.auto, will retry
Thu Apr 12 08:00:03 2018 daemon.info dnsmasq[962]: read /etc/hosts - 4 addresses
Thu Apr 12 08:00:03 2018 daemon.info dnsmasq[962]: read /tmp/hosts/dhcp.cfg01411c - 4 addresses
Thu Apr 12 08:00:04 2018 daemon.info haveged: haveged: ver: 1.9.2; arch: generic; vend: ; build: (gcc 7.3.0 CV); collect: 128K
Thu Apr 12 08:00:04 2018 daemon.info haveged: haveged: cpu: (); data: 32K (P); inst: 32K (P); idx: 16/40; sz: 31328/75928
Thu Apr 12 08:00:04 2018 daemon.info haveged: haveged: fills: 0, generated: 0
Thu Apr 12 08:00:05 2018 daemon.err gluon-arp-limiter[1138]: Error - interface bat0 is not present or not a batman-adv interface
Thu Apr 12 08:00:05 2018 daemon.err gluon-arp-limiter[1138]: Error - interface bat0 is not present or not a batman-adv interface
Thu Apr 12 08:00:06 2018 user.notice : Added device handler type: tunnel
Thu Apr 12 08:00:06 2018 user.notice : Added device handler type: Network device
Thu Apr 12 08:00:06 2018 user.notice : Added device handler type: bridge
Thu Apr 12 08:00:06 2018 user.notice : Added device handler type: veth
Thu Apr 12 08:00:06 2018 user.notice : Added device handler type: macvlan
Thu Apr 12 08:00:06 2018 user.notice : Added device handler type: 8021ad
Thu Apr 12 08:00:06 2018 user.notice : Added device handler type: 8021q
Thu Apr 12 08:00:08 2018 daemon.warn netifd: You have delegated IPv6-prefixes but haven't assigned them to any interface. Did you forget to set option ip6assign on your lan-interfaces?
Thu Apr 12 08:00:08 2018 kern.info kernel: [  271.729441] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
Thu Apr 12 08:00:08 2018 kern.info kernel: [  271.730438] dwmac1000: Master AXI performs any burst length
Thu Apr 12 08:00:08 2018 kern.info kernel: [  271.738447] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Thu Apr 12 08:00:08 2018 kern.info kernel: [  271.743945] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Thu Apr 12 08:00:08 2018 kern.info kernel: [  271.752983] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Thu Apr 12 08:00:08 2018 kern.info kernel: [  271.772450] br-client: port 1(eth1.1) entered blocking state
Thu Apr 12 08:00:08 2018 kern.info kernel: [  271.772481] br-client: port 1(eth1.1) entered disabled state
Thu Apr 12 08:00:08 2018 kern.info kernel: [  271.777626] device eth1.1 entered promiscuous mode
Thu Apr 12 08:00:08 2018 kern.info kernel: [  271.782890] device eth1 entered promiscuous mode
Thu Apr 12 08:00:08 2018 daemon.notice netifd: Interface 'client' is enabled
Thu Apr 12 08:00:08 2018 kern.info kernel: [  271.802181] IPv6: ADDRCONF(NETDEV_UP): br-client: link is not ready
Thu Apr 12 08:00:08 2018 user.notice sysctl: net.ipv6.conf.br-client.forwarding = 0
Thu Apr 12 08:00:08 2018 kern.info kernel: [  271.989499] Generic PHY fixed-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:00, irq=POLL)
Thu Apr 12 08:00:08 2018 kern.info kernel: [  271.990507] dwmac1000: Master AXI performs any burst length
Thu Apr 12 08:00:08 2018 kern.info kernel: [  271.998524] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
Thu Apr 12 08:00:08 2018 kern.info kernel: [  272.004020] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
Thu Apr 12 08:00:08 2018 kern.info kernel: [  272.013458] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Thu Apr 12 08:00:08 2018 kern.info kernel: [  272.029616] br-wan: port 1(eth0.2) entered blocking state
Thu Apr 12 08:00:08 2018 kern.info kernel: [  272.029655] br-wan: port 1(eth0.2) entered disabled state
Thu Apr 12 08:00:08 2018 kern.info kernel: [  272.034338] device eth0.2 entered promiscuous mode
Thu Apr 12 08:00:08 2018 kern.info kernel: [  272.039375] device eth0 entered promiscuous mode
Thu Apr 12 08:00:08 2018 daemon.notice netifd: Interface 'wan6' is enabled
Thu Apr 12 08:00:08 2018 daemon.notice netifd: Interface 'wan' is enabled
Thu Apr 12 08:00:08 2018 kern.info kernel: [  272.048740] IPv6: ADDRCONF(NETDEV_UP): br-wan: link is not ready
Thu Apr 12 08:00:08 2018 daemon.notice netifd: Interface 'local_node' is enabled
Thu Apr 12 08:00:08 2018 kern.info kernel: [  272.054840] IPv6: ADDRCONF(NETDEV_UP): local-node: link is not ready
Thu Apr 12 08:00:08 2018 daemon.notice netifd: Interface 'local_node' is setting up now
Thu Apr 12 08:00:08 2018 daemon.notice netifd: Interface 'local_node' is now up
Thu Apr 12 08:00:08 2018 daemon.notice netifd: Interface 'gluon_bat0' is setting up now
Thu Apr 12 08:00:08 2018 daemon.notice netifd: Interface 'loopback' is enabled
Thu Apr 12 08:00:08 2018 daemon.notice netifd: Interface 'loopback' is setting up now
Thu Apr 12 08:00:08 2018 daemon.notice netifd: Interface 'loopback' is now up
Thu Apr 12 08:00:08 2018 kern.info kernel: [  272.107866] IPv6: ADDRCONF(NETDEV_CHANGE): local-node: link becomes ready
Thu Apr 12 08:00:08 2018 kern.info kernel: [  272.141727] br-client: port 2(local-port) entered blocking state
Thu Apr 12 08:00:08 2018 kern.info kernel: [  272.141764] br-client: port 2(local-port) entered disabled state
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.174481] device local-port entered promiscuous mode
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.179529] br-client: port 2(local-port) entered blocking state
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.179563] br-client: port 2(local-port) entered forwarding state
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.185366] IPv6: ADDRCONF(NETDEV_CHANGE): br-client: link becomes ready
Thu Apr 12 08:00:09 2018 daemon.notice netifd: bridge 'br-client' link is up
Thu Apr 12 08:00:09 2018 daemon.notice netifd: Interface 'client' has link connectivity
Thu Apr 12 08:00:09 2018 daemon.notice netifd: Interface 'client' is setting up now
Thu Apr 12 08:00:09 2018 daemon.notice netifd: Network device 'local-port' link is up
Thu Apr 12 08:00:09 2018 daemon.notice netifd: veth 'local-node' link is up
Thu Apr 12 08:00:09 2018 daemon.notice netifd: Interface 'local_node' has link connectivity
Thu Apr 12 08:00:09 2018 daemon.notice netifd: Network device 'lo' link is up
Thu Apr 12 08:00:09 2018 daemon.notice netifd: Interface 'loopback' has link connectivity
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.362501] batman_adv: bat0: Adding interface: primary0
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.362550] batman_adv: bat0: Interface activated: primary0
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.369274] 8021q: adding VLAN 0 to HW filter on device bat0
Thu Apr 12 08:00:09 2018 daemon.notice netifd: Interface 'bat0' is enabled
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.376022] br-client: port 3(bat0) entered blocking state
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.378086] br-client: port 3(bat0) entered disabled state
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.383776] device bat0 entered promiscuous mode
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.388898] br-client: port 3(bat0) entered blocking state
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.393694] br-client: port 3(bat0) entered forwarding state
Thu Apr 12 08:00:09 2018 daemon.notice netifd: Network device 'bat0' link is up
Thu Apr 12 08:00:09 2018 daemon.notice netifd: Interface 'bat0' has link connectivity
Thu Apr 12 08:00:09 2018 daemon.notice netifd: Interface 'bat0' is setting up now
Thu Apr 12 08:00:09 2018 daemon.notice netifd: Interface 'bat0' is now up
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.461691] batman_adv: bat0: Interface deactivated: primary0
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.468621] IPv6: ADDRCONF(NETDEV_UP): primary0: link is not ready
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.470342] batman_adv: bat0: Interface activated: primary0
Thu Apr 12 08:00:09 2018 daemon.notice netifd: Interface 'gluon_bat0' is now up
Thu Apr 12 08:00:09 2018 daemon.notice netifd: Network device 'primary0' link is up
Thu Apr 12 08:00:09 2018 user.notice firewall: Reloading firewall due to ifup of local_node (local-node)
Thu Apr 12 08:00:09 2018 daemon.notice netifd: Interface 'client' is now down
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.792919] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.863019] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.863051] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.963974] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.964742] br-client: port 3(bat0) entered disabled state
Thu Apr 12 08:00:09 2018 kern.info kernel: [  272.969099] br-client: port 2(local-port) entered disabled state
Thu Apr 12 08:00:09 2018 kern.info kernel: [  273.032961] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Thu Apr 12 08:00:09 2018 kern.info kernel: [  273.106409] device bat0 left promiscuous mode
Thu Apr 12 08:00:09 2018 kern.info kernel: [  273.106496] br-client: port 3(bat0) entered disabled state
Thu Apr 12 08:00:09 2018 kern.info kernel: [  273.111418] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Thu Apr 12 08:00:09 2018 kern.info kernel: [  273.116908] device eth1.1 left promiscuous mode
Thu Apr 12 08:00:09 2018 kern.info kernel: [  273.121305] device eth1 left promiscuous mode
Thu Apr 12 08:00:09 2018 kern.info kernel: [  273.126040] br-client: port 1(eth1.1) entered disabled state
Thu Apr 12 08:00:09 2018 kern.info kernel: [  273.141132] br-wan: port 1(eth0.2) entered blocking state
Thu Apr 12 08:00:09 2018 kern.info kernel: [  273.141167] br-wan: port 1(eth0.2) entered forwarding state
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.147168] IPv6: ADDRCONF(NETDEV_CHANGE): br-wan: link becomes ready
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.158297] IPv6: ADDRCONF(NETDEV_UP): eth1.1: link is not ready
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.207857] device local-port left promiscuous mode
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.207956] br-client: port 2(local-port) entered disabled state
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.213425] IPv6: ADDRCONF(NETDEV_UP): local-port: link is not ready
Thu Apr 12 08:00:10 2018 daemon.notice netifd: Interface 'client' is disabled
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.269013] br-client: port 1(bat0) entered blocking state
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.269051] br-client: port 1(bat0) entered disabled state
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.293740] device bat0 entered promiscuous mode
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.298743] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.299756] dwmac1000: Master AXI performs any burst length
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.307777] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.313254] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.322198] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Thu Apr 12 08:00:10 2018 daemon.err block: /dev/mtdblock12 is already mounted on /rom
Thu Apr 12 08:00:10 2018 daemon.err block: /dev/mtdblock13 is already mounted on /overlay
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.376237] br-client: port 2(eth1.1) entered blocking state
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.376285] br-client: port 2(eth1.1) entered disabled state
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.381320] device eth1.1 entered promiscuous mode
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.386768] device eth1 entered promiscuous mode
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.397627] br-client: port 3(local-port) entered blocking state
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.397660] br-client: port 3(local-port) entered disabled state
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.405188] device local-port entered promiscuous mode
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.410279] br-client: port 3(local-port) entered blocking state
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.413749] br-client: port 3(local-port) entered forwarding state
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.419865] br-client: port 1(bat0) entered blocking state
Thu Apr 12 08:00:10 2018 kern.info kernel: [  273.425866] br-client: port 1(bat0) entered forwarding state
Thu Apr 12 08:00:10 2018 daemon.notice netifd: Interface 'client' is enabled
Thu Apr 12 08:00:10 2018 daemon.notice netifd: Interface 'client' is setting up now
Thu Apr 12 08:00:10 2018 daemon.notice netifd: bridge 'br-wan' link is up
Thu Apr 12 08:00:10 2018 daemon.notice netifd: Interface 'wan6' has link connectivity
Thu Apr 12 08:00:10 2018 daemon.notice netifd: Interface 'wan6' is setting up now
Thu Apr 12 08:00:10 2018 daemon.notice netifd: Interface 'wan' has link connectivity
Thu Apr 12 08:00:10 2018 daemon.notice netifd: Interface 'wan' is setting up now
Thu Apr 12 08:00:10 2018 daemon.notice netifd: Network device 'eth0' link is up
Thu Apr 12 08:00:10 2018 daemon.notice netifd: VLAN 'eth0.2' link is up
Thu Apr 12 08:00:10 2018 daemon.err odhcp6c[1632]: Failed to send RS (Address not available)
Thu Apr 12 08:00:10 2018 daemon.err odhcp6c[1640]: Failed to send RS (Address not available)
Thu Apr 12 08:00:10 2018 daemon.notice netifd: wan (1663): udhcpc: started, v1.28.3
Thu Apr 12 08:00:10 2018 daemon.err odhcp6c[1632]: Failed to send DHCPV6 message to ff02::1:2 (Address not available)
Thu Apr 12 08:00:10 2018 kern.debug kernel: [  273.793194] ath: EEPROM regdomain: 0x8114
Thu Apr 12 08:00:10 2018 kern.debug kernel: [  273.793202] ath: EEPROM indicates we should expect a country code
Thu Apr 12 08:00:10 2018 kern.debug kernel: [  273.793207] ath: doing EEPROM country->regdmn map search
Thu Apr 12 08:00:10 2018 kern.debug kernel: [  273.793211] ath: country maps to regdmn code: 0x37
Thu Apr 12 08:00:10 2018 kern.debug kernel: [  273.793220] ath: Country alpha2 being used: DE
Thu Apr 12 08:00:10 2018 kern.debug kernel: [  273.793228] ath: Regpair used: 0x37
Thu Apr 12 08:00:10 2018 kern.debug kernel: [  273.793239] ath: regdomain 0x8114 dynamically updated by user
Thu Apr 12 08:00:10 2018 kern.debug kernel: [  273.793269] ath: EEPROM regdomain: 0x8114
Thu Apr 12 08:00:10 2018 kern.debug kernel: [  273.793274] ath: EEPROM indicates we should expect a country code
Thu Apr 12 08:00:10 2018 kern.debug kernel: [  273.793278] ath: doing EEPROM country->regdmn map search
Thu Apr 12 08:00:10 2018 kern.debug kernel: [  273.793282] ath: country maps to regdmn code: 0x37
Thu Apr 12 08:00:10 2018 kern.debug kernel: [  273.793286] ath: Country alpha2 being used: DE
Thu Apr 12 08:00:10 2018 kern.debug kernel: [  273.793290] ath: Regpair used: 0x37
Thu Apr 12 08:00:10 2018 kern.debug kernel: [  273.793295] ath: regdomain 0x8114 dynamically updated by user
Thu Apr 12 08:00:10 2018 daemon.notice netifd: wan (1663): udhcpc: sending discover
Thu Apr 12 08:00:10 2018 daemon.notice netifd: wan (1663): udhcpc: sending select for 192.168.22.85
Thu Apr 12 08:00:10 2018 daemon.notice netifd: wan (1663): udhcpc: lease of 192.168.22.85 obtained, lease time 864000
Thu Apr 12 08:00:10 2018 authpriv.info dropbear[1759]: Not backgrounding
Thu Apr 12 08:00:11 2018 daemon.notice netifd: Interface 'wan' is now up
Thu Apr 12 08:00:11 2018 kern.info kernel: [  274.392827] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
Thu Apr 12 08:00:11 2018 kern.info kernel: [  274.392907] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Thu Apr 12 08:00:11 2018 daemon.notice netifd: Network device 'eth1' link is up
Thu Apr 12 08:00:11 2018 daemon.notice netifd: VLAN 'eth1.1' link is up
Thu Apr 12 08:00:11 2018 kern.info kernel: [  274.404192] br-client: port 2(eth1.1) entered blocking state
Thu Apr 12 08:00:11 2018 kern.info kernel: [  274.406770] br-client: port 2(eth1.1) entered forwarding state
Thu Apr 12 08:00:11 2018 daemon.err odhcp6c[1632]: Failed to send DHCPV6 message to ff02::1:2 (Address not available)
Thu Apr 12 08:00:11 2018 daemon.err odhcp6c[1640]: Failed to send DHCPV6 message to ff02::1:2 (Address not available)
Thu Apr 12 08:00:11 2018 user.notice firewall: Reloading firewall due to ifup of wan (br-wan)
Thu Apr 12 08:00:11 2018 daemon.notice netifd: radio1 (1298): command failed: Not supported (-95)
Thu Apr 12 08:00:11 2018 daemon.notice netifd: radio0 (1297): command failed: Not supported (-95)
Thu Apr 12 08:00:11 2018 daemon.notice netifd: radio0 (1297): Usage:	iw [options] dev <devname> set channel <channel> [NOHT|HT20|HT40+|HT40-|5MHz|10MHz|80MHz]
Thu Apr 12 08:00:11 2018 daemon.notice netifd: radio0 (1297): Options:
Thu Apr 12 08:00:11 2018 daemon.notice netifd: radio0 (1297): 	--debug		enable netlink debugging
Thu Apr 12 08:00:12 2018 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf
Thu Apr 12 08:00:12 2018 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Thu Apr 12 08:00:13 2018 user.notice sysctl: net.ipv6.conf.local-node.forwarding = 0
Thu Apr 12 08:00:13 2018 daemon.info dnsmasq[2180]: started, version 2.80test2 cachesize 150
Thu Apr 12 08:00:13 2018 daemon.info dnsmasq[2180]: compile time options: IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth no-DNSSEC no-ID loop-detect inotify dumpfile
Thu Apr 12 08:00:13 2018 daemon.info dnsmasq[2180]: reading /var/gluon/wan-dnsmasq/resolv.conf
Thu Apr 12 08:00:13 2018 daemon.info dnsmasq[2180]: using nameserver 192.168.22.66#53
Thu Apr 12 08:00:13 2018 daemon.info dnsmasq[2180]: cleared cache
Thu Apr 12 08:00:13 2018 kern.info kernel: [  276.962737] IPv6: ADDRCONF(NETDEV_UP): client0: link is not ready
Thu Apr 12 08:00:15 2018 daemon.notice fastd[2549]: fastd v18 starting
Thu Apr 12 08:00:15 2018 kern.info kernel: [  278.514303] IPv6: ADDRCONF(NETDEV_UP): client1: link is not ready
Thu Apr 12 08:00:15 2018 kern.info kernel: [  278.514626] br-client: port 4(client0) entered blocking state
Thu Apr 12 08:00:15 2018 kern.info kernel: [  278.519381] br-client: port 4(client0) entered disabled state
Thu Apr 12 08:00:15 2018 kern.info kernel: [  278.525558] device client0 entered promiscuous mode
Thu Apr 12 08:00:15 2018 daemon.notice fastd[2549]: changed to UID 0, GID 800
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: adding peer <mesh_vpn_backbone_peer_gw04>
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: adding peer <mesh_vpn_backbone_peer_gw07>
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: adding peer <mesh_vpn_backbone_peer_gw08>
Thu Apr 12 08:00:15 2018 daemon.notice hostapd: client0: interface state UNINITIALIZED->COUNTRY_UPDATE
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: adding peer <mesh_vpn_backbone_peer_gw05>
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: adding peer <mesh_vpn_backbone_peer_gw01>
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: adding peer <mesh_vpn_backbone_peer_gw02>
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: adding peer <mesh_vpn_backbone_peer_gw06>
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: adding peer <mesh_vpn_backbone_peer_gw03>
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: resolving host `gw03.darmstadt.freifunk.net' for peer <mesh_vpn_backbone_peer_gw03>...
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: resolving host `gw06.darmstadt.freifunk.net' for peer <mesh_vpn_backbone_peer_gw06>...
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: resolving host `gw02.darmstadt.freifunk.net' for peer <mesh_vpn_backbone_peer_gw02>...
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: resolving host `gw01.darmstadt.freifunk.net' for peer <mesh_vpn_backbone_peer_gw01>...
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: resolving host `gw05.darmstadt.freifunk.net' for peer <mesh_vpn_backbone_peer_gw05>...
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: resolving host `gw08.darmstadt.freifunk.net' for peer <mesh_vpn_backbone_peer_gw08>...
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: resolving host `gw07.darmstadt.freifunk.net' for peer <mesh_vpn_backbone_peer_gw07>...
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: resolving host `gw04.darmstadt.freifunk.net' for peer <mesh_vpn_backbone_peer_gw04>...
Thu Apr 12 08:00:15 2018 daemon.notice netifd: Interface 'wan6' is now up
Thu Apr 12 08:00:15 2018 kern.info kernel: [  278.567612] br-client: port 5(client1) entered blocking state
Thu Apr 12 08:00:15 2018 kern.info kernel: [  278.567644] br-client: port 5(client1) entered disabled state
Thu Apr 12 08:00:15 2018 kern.info kernel: [  278.572825] device client1 entered promiscuous mode
Thu Apr 12 08:00:15 2018 daemon.notice netifd: Interface 'mesh_vpn' is enabled
Thu Apr 12 08:00:15 2018 daemon.notice netifd: Network device 'mesh-vpn' link is up
Thu Apr 12 08:00:15 2018 daemon.notice netifd: Interface 'mesh_vpn' has link connectivity
Thu Apr 12 08:00:15 2018 daemon.notice netifd: Interface 'mesh_vpn' is setting up now
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: resolved host `gw05.darmstadt.freifunk.net' successfully
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: resolved host `gw02.darmstadt.freifunk.net' successfully
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: resolved host `gw07.darmstadt.freifunk.net' successfully
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: resolved host `gw06.darmstadt.freifunk.net' successfully
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: resolved host `gw03.darmstadt.freifunk.net' successfully
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: resolved host `gw04.darmstadt.freifunk.net' successfully
Thu Apr 12 08:00:15 2018 daemon.err hostapd: Using interface client0 with hwaddr 4e:f4:24:d7:d9:d8 and ssid "darmstadt.freifunk.net"
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: resolved host `gw08.darmstadt.freifunk.net' successfully
Thu Apr 12 08:00:15 2018 daemon.info fastd[2549]: resolved host `gw01.darmstadt.freifunk.net' successfully
Thu Apr 12 08:00:15 2018 daemon.notice hostapd: client1: interface state UNINITIALIZED->COUNTRY_UPDATE
Thu Apr 12 08:00:15 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led USB 1
Thu Apr 12 08:00:15 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led USB 2
Thu Apr 12 08:00:15 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led wan
Thu Apr 12 08:00:15 2018 daemon.notice procd: /etc/rc.d/S96led: setting up led lan
Thu Apr 12 08:00:15 2018 kern.info kernel: [  278.939336] batman_adv: bat0: Changing gw mode from: off to: client
Thu Apr 12 08:00:15 2018 kern.info kernel: [  278.939619] batman_adv: bat0: hop_penalty: Changing from: 30 to: 15
Thu Apr 12 08:00:15 2018 kern.info kernel: [  278.944866] batman_adv: bat0: multicast_mode: Changing from: enabled to: disabled
Thu Apr 12 08:00:15 2018 kern.info kernel: [  278.950910] batman_adv: bat0: orig_interval: Changing from: 1000 to: 5000
Thu Apr 12 08:00:15 2018 daemon.notice netifd: Interface 'mesh_vpn' is now up
Thu Apr 12 08:00:15 2018 kern.info kernel: [  278.999722] IPv6: ADDRCONF(NETDEV_CHANGE): client0: link becomes ready
Thu Apr 12 08:00:15 2018 kern.info kernel: [  278.999951] br-client: port 4(client0) entered blocking state
Thu Apr 12 08:00:15 2018 kern.info kernel: [  279.005268] br-client: port 4(client0) entered forwarding state
Thu Apr 12 08:00:15 2018 daemon.notice hostapd: client0: interface state COUNTRY_UPDATE->ENABLED
Thu Apr 12 08:00:15 2018 daemon.notice hostapd: client0: AP-ENABLED
Thu Apr 12 08:00:15 2018 daemon.err hostapd: Using interface client1 with hwaddr ec:08:6b:24:c2:54 and ssid "darmstadt.freifunk.net"
Thu Apr 12 08:00:15 2018 user.notice firewall: Reloading firewall due to ifup of wan6 (br-wan)
Thu Apr 12 08:00:16 2018 daemon.notice netifd: radio0 (1297): ip: SIOCSIFFLAGS: Invalid argument
Thu Apr 12 08:00:16 2018 kern.warn kernel: [  279.409171] ath10k_pci 0000:01:00.0: must load driver with rawmode=1 to add mesh interfaces
Thu Apr 12 08:00:16 2018 kern.info kernel: [  279.413144] batman_adv: bat0: Adding interface: mesh-vpn
Thu Apr 12 08:00:16 2018 kern.info kernel: [  279.416334] batman_adv: bat0: The MTU of interface mesh-vpn is too small (1312) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
Thu Apr 12 08:00:16 2018 kern.info kernel: [  279.423784] batman_adv: bat0: Interface activated: mesh-vpn
Thu Apr 12 08:00:16 2018 daemon.notice netifd: radio0 (1297): Interface 0 setup failed: IFUP_ERROR
Thu Apr 12 08:00:16 2018 daemon.notice hostapd: client1: interface state COUNTRY_UPDATE->ENABLED
Thu Apr 12 08:00:16 2018 daemon.notice hostapd: client1: AP-ENABLED
Thu Apr 12 08:00:16 2018 user.notice sysctl: net.ipv6.conf.br-client.forwarding = 0
Thu Apr 12 08:00:16 2018 kern.info kernel: [  279.495038] IPv6: ADDRCONF(NETDEV_CHANGE): client1: link becomes ready
Thu Apr 12 08:00:16 2018 kern.info kernel: [  279.495275] br-client: port 5(client1) entered blocking state
Thu Apr 12 08:00:16 2018 kern.info kernel: [  279.500475] br-client: port 5(client1) entered forwarding state
Thu Apr 12 08:00:16 2018 daemon.info dnsmasq[2180]: reading /var/gluon/wan-dnsmasq/resolv.conf
Thu Apr 12 08:00:16 2018 daemon.info dnsmasq[2180]: using nameserver fd00::3631:c4ff:fe39:4ee1#53
Thu Apr 12 08:00:16 2018 daemon.info dnsmasq[2180]: using nameserver 192.168.22.66#53
Thu Apr 12 08:00:16 2018 daemon.info procd: - init complete -
Thu Apr 12 08:00:16 2018 daemon.notice netifd: radio1 (1298): ip: SIOCSIFFLAGS: Invalid argument
Thu Apr 12 08:00:16 2018 daemon.notice netifd: radio1 (1298): Interface 0 setup failed: IFUP_ERROR
Thu Apr 12 08:00:16 2018 kern.warn kernel: [  279.632599] ath10k_pci 0001:01:00.0: must load driver with rawmode=1 to add mesh interfaces
Thu Apr 12 08:00:16 2018 daemon.notice netifd: Network device 'client0' link is up
Thu Apr 12 08:00:16 2018 daemon.info fastd[2549]: sending handshake to <mesh_vpn_backbone_peer_gw03>[82.195.73.42:10010]...
Thu Apr 12 08:00:16 2018 daemon.info fastd[2549]: sending handshake to <mesh_vpn_backbone_peer_gw08>[82.195.73.47:10010]...
Thu Apr 12 08:00:16 2018 daemon.info fastd[2549]: received handshake response from <mesh_vpn_backbone_peer_gw03>[82.195.73.42:10010] using fastd v18
Thu Apr 12 08:00:16 2018 daemon.notice netifd: Network device 'client1' link is up
Thu Apr 12 08:00:16 2018 daemon.info fastd[2549]: 82.195.73.42:10010 authorized as <mesh_vpn_backbone_peer_gw03>
Thu Apr 12 08:00:16 2018 daemon.notice fastd[2549]: connection with <mesh_vpn_backbone_peer_gw03> established.
Thu Apr 12 08:00:16 2018 daemon.info fastd[2549]: new session with <mesh_vpn_backbone_peer_gw03> established using method `salsa2012+umac'.
Thu Apr 12 08:00:16 2018 user.notice firewall: Reloading firewall due to ifup of mesh_vpn (mesh-vpn)
Thu Apr 12 08:00:16 2018 daemon.info urandom_seed[2985]: Seed saved (/etc/urandom.seed)
Thu Apr 12 08:00:20 2018 kern.info kernel: [  283.612844] batman_adv: bat0: IGMP Querier appeared
Thu Apr 12 08:00:20 2018 kern.info kernel: [  283.612890] batman_adv: bat0: MLD Querier appeared
Thu Apr 12 08:00:24 2018 daemon.notice netifd: Interface 'client' is now up
Thu Apr 12 08:00:25 2018 user.notice firewall: Reloading firewall due to ifup of client (br-client)
Wed Aug  8 00:22:49 2018 kern.warn kernel: [  303.193544] NOHZ: local_softirq_pending 08
Wed Aug  8 00:23:09 2018 kern.warn kernel: [  323.674153] NOHZ: local_softirq_pending 08
Wed Aug  8 00:23:22 2018 daemon.err gluon-radv-filterd[1834]: Switching to da:ff:01:00:03:04 (TQ=49)
Wed Aug  8 00:23:23 2018 user.notice firewall: Reloading firewall due to ifupdate of client (br-client)
Wed Aug  8 00:23:50 2018 kern.warn kernel: [  364.634429] NOHZ: local_softirq_pending 08
Wed Aug  8 00:24:05 2018 authpriv.info dropbear[4361]: Child connection from 2001:67c:2ed8:1001:807d:232c:ee23:6103:58222
Wed Aug  8 00:24:06 2018 authpriv.notice dropbear[4361]: Pubkey auth succeeded for 'root' with key sha1!! 7f:84:34:95:e8:10:01:cb:4b:ce:39:29:69:94:c0:b3:48:19:3d:49 from 2001:67c:2ed8:1001:807d:232c:ee23:6103:58222

dmesg

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.14.54 (hexa@build.ffda.io) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7156+7-a297324a13)) #0 SMP Thu Apr 12 05:50:02 2018
[    0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[    0.000000] OF: fdt: Machine model: TP-Link Archer C2600
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 122880
[    0.000000] free_area_init_node: node 0, pgdat c0b27b00, node_mem_map ddc39000
[    0.000000]   Normal zone: 960 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 122880 pages, LIFO batch:31
[    0.000000] random: get_random_bytes called from start_kernel+0x88/0x40c with crng_init=0
[    0.000000] percpu: Embedded 15 pages/cpu @ddc01000 s29324 r8192 d23924 u61440
[    0.000000] pcpu-alloc: s29324 r8192 d23924 u61440 alloc=15*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 121920
[    0.000000] Kernel command line:
[    0.000000] Bootloader command line (ignored): console=ttyHSL1,115200n8 root=mtd:rootfs rootfstype=squashfs
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 478384K/491520K available (4832K kernel code, 161K rwdata, 1280K rodata, 1024K init, 250K bss, 13136K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xde800000 - 0xff800000   ( 528 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xde000000   ( 480 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0208000 - 0xc07b80f0   (5825 kB)
[    0.000000]       .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
[    0.000000]       .data : 0xc0b00000 - 0xc0b28400   ( 161 kB)
[    0.000000]        .bss : 0xc0b2a000 - 0xc0b68aec   ( 251 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
[    0.000008] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
[    0.000020] Switching to timer-based delay loop, resolution 160ns
[    0.000238] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
[    0.000259] pid_max: default: 32768 minimum: 301
[    0.000381] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000398] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000962] CPU: Testing write buffer coherency: ok
[    0.001690] Setting up static identity map for 0x42300000 - 0x42300060
[    0.001842] Hierarchical SRCU implementation.
[    0.002560] smp: Bringing up secondary CPUs ...
[    0.004333] smp: Brought up 1 node, 2 CPUs
[    0.004348] SMP: Total of 2 processors activated (25.00 BogoMIPS).
[    0.004358] CPU: All CPU(s) started in SVC mode.
[    0.015250] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
[    0.015409] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.015432] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.015545] pinctrl core: initialized pinctrl subsystem
[    0.016523] NET: Registered protocol family 16
[    0.016761] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.018106] cpuidle: using governor ladder
[    0.018170] cpuidle: using governor menu
[    0.038807] msm_bus_fabric_init_driver
[    0.040198] usbcore: registered new interface driver usbfs
[    0.040287] usbcore: registered new interface driver hub
[    0.040383] usbcore: registered new device driver usb
[    0.040439] pps_core: LinuxPPS API ver. 1 registered
[    0.040452] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.040484] PTP clock support registered
[    0.042334] clocksource: Switched to clocksource dg_timer
[    0.045581] NET: Registered protocol family 2
[    0.046172] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.046216] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.046268] TCP: Hash tables configured (established 4096 bind 4096)
[    0.046359] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.046385] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.046540] NET: Registered protocol family 1
[    0.046587] PCI: CLS 0 bytes, default 64
[    0.047698] No memory allocated for crashlog
[    0.047931] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[    0.053018] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.053034] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.061236] io scheduler noop registered
[    0.061253] io scheduler deadline registered (default)
[    0.062918] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
[    0.063036] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
[    0.063131] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
[    0.063960] OF: PCI: host bridge /soc/pci@1b500000 ranges:
[    0.064002] OF: PCI:    IO 0x0fe00000..0x0fefffff -> 0x0fe00000
[    0.064027] OF: PCI:   MEM 0x08000000..0x0fdfffff -> 0x08000000
[    0.172149] qcom-pcie 1b500000.pci: link up
[    0.172321] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
[    0.172344] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.172363] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
[    0.172378] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
[    0.172394] pci_bus 0000:00: scanning bus
[    0.172526] pci 0000:00:00.0: [17cb:0101] type 01 class 0x060400
[    0.172623] pci 0000:00:00.0: calling pci_fixup_ide_bases+0x0/0x44
[    0.172697] pci 0000:00:00.0: supports D1
[    0.172707] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    0.172723] pci 0000:00:00.0: PME# disabled
[    0.172979] pci_bus 0000:00: fixups for bus
[    0.173003] PCI: bus0: Fast back to back transfers disabled
[    0.173021] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[    0.173144] pci_bus 0000:01: scanning bus
[    0.173319] pci 0000:01:00.0: [168c:0040] type 00 class 0x028000
[    0.173668] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.174136] pci 0000:01:00.0: calling pci_fixup_ide_bases+0x0/0x44
[    0.174778] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[    0.174818] pci 0000:01:00.0: PME# disabled
[    0.175152] pci_bus 0000:01: fixups for bus
[    0.175223] PCI: bus1: Fast back to back transfers disabled
[    0.175237] pci_bus 0000:01: bus scan returning with max=01
[    0.175254] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[    0.175271] pci_bus 0000:00: bus scan returning with max=ff
[    0.175320] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
[    0.175344] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
[    0.175473] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    0.175497] pci 0000:00:00.0:   bridge window [mem 0x08000000-0x081fffff]
[    0.175533] pci 0000:00:00.0: calling qcom_pcie_fixup_final+0x0/0x94
[    0.175727] pcieport 0000:00:00.0: assign IRQ: got 66
[    0.176051] pcieport 0000:00:00.0: AER enabled with IRQ 34
[    0.176172] pci 0000:01:00.0: calling qcom_pcie_fixup_final+0x0/0x94
[    0.176611] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
[    0.176707] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
[    0.176813] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
[    0.177618] OF: PCI: host bridge /soc/pci@1b700000 ranges:
[    0.177653] OF: PCI:    IO 0x31e00000..0x31efffff -> 0x31e00000
[    0.177676] OF: PCI:   MEM 0x2e000000..0x31dfffff -> 0x2e000000
[    0.287577] qcom-pcie 1b700000.pci: link up
[    0.287732] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
[    0.287750] pci_bus 0001:00: root bus resource [bus 00-ff]
[    0.287764] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[    0.287777] pci_bus 0001:00: scanning bus
[    0.287816] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400
[    0.287890] pci 0001:00:00.0: calling pci_fixup_ide_bases+0x0/0x44
[    0.287953] pci 0001:00:00.0: supports D1
[    0.287962] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[    0.287976] pci 0001:00:00.0: PME# disabled
[    0.288217] pci_bus 0001:00: fixups for bus
[    0.288236] PCI: bus0: Fast back to back transfers disabled
[    0.288252] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[    0.288370] pci_bus 0001:01: scanning bus
[    0.288557] pci 0001:01:00.0: [168c:0040] type 00 class 0x028000
[    0.288929] pci 0001:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
[    0.289431] pci 0001:01:00.0: calling pci_fixup_ide_bases+0x0/0x44
[    0.290122] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[    0.290166] pci 0001:01:00.0: PME# disabled
[    0.290507] pci_bus 0001:01: fixups for bus
[    0.290582] PCI: bus1: Fast back to back transfers disabled
[    0.290597] pci_bus 0001:01: bus scan returning with max=01
[    0.290612] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[    0.290629] pci_bus 0001:00: bus scan returning with max=ff
[    0.290666] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
[    0.290687] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
[    0.290819] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[    0.290840] pci 0001:00:00.0:   bridge window [mem 0x2e000000-0x2e1fffff]
[    0.290873] pci 0001:00:00.0: calling qcom_pcie_fixup_final+0x0/0x94
[    0.291054] pcieport 0001:00:00.0: assign IRQ: got 99
[    0.291352] pcieport 0001:00:00.0: AER enabled with IRQ 67
[    0.291464] pci 0001:01:00.0: calling qcom_pcie_fixup_final+0x0/0x94
[    0.293741] L2 @ QSB rate. Forcing new rate.
[    0.293957] L2 @ 384000 KHz
[    0.294124] CPU0 @ 800000 KHz
[    0.294137] CPU1 @ QSB rate. Forcing new rate.
[    0.294257] CPU1 @ 384000 KHz
[    0.298215] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
[    0.299620] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
[    0.301065] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.303846] msm_serial 16340000.serial: msm_serial: detected port #0
[    0.303955] msm_serial 16340000.serial: uartclk = 7372800
[    0.304038] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 100, base_baud = 460800) is a MSM
[    0.304072] msm_serial: console setup on port #0
[    1.034326] console [ttyMSM0] enabled
[    1.039021] msm_serial: driver initialized
[    1.047702] loop: module loaded
[    1.049199] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[    1.051118] m25p80 spi0.0: mx25u25635f (32768 Kbytes)
[    1.057292] 25 fixed-partitions partitions found on MTD device spi0.0
[    1.061980] Creating 25 MTD partitions on "spi0.0":
[    1.068489] 0x000000000000-0x000000020000 : "SBL1"
[    1.074026] 0x000000020000-0x000000040000 : "MIBIB"
[    1.078681] 0x000000040000-0x000000060000 : "SBL2"
[    1.083542] 0x000000060000-0x000000090000 : "SBL3"
[    1.088311] 0x000000090000-0x0000000a0000 : "DDRCONFIG"
[    1.093172] 0x0000000a0000-0x0000000b0000 : "SSD"
[    1.098217] 0x0000000b0000-0x0000000e0000 : "TZ"
[    1.103170] 0x0000000e0000-0x000000100000 : "RPM"
[    1.107752] 0x000000100000-0x000000170000 : "fs-uboot"
[    1.112363] 0x000000170000-0x0000001b0000 : "uboot-env"
[    1.117488] 0x0000001b0000-0x0000001f0000 : "radio"
[    1.122527] 0x0000001f0000-0x0000005f0000 : "os-image"
[    1.127460] 0x0000005f0000-0x000001ef0000 : "rootfs"
[    1.132644] mtd: device 12 (rootfs) set to be root filesystem
[    1.137766] 1 squashfs-split partitions found on MTD device rootfs
[    1.142779] 0x000000970000-0x000001ef0000 : "rootfs_data"
[    1.149974] 0x000001ef0000-0x000001ef0200 : "default-mac"
[    1.155409] 0x000001ef0200-0x000001ef0400 : "pin"
[    1.160652] 0x000001ef0400-0x000001f00000 : "product-info"
[    1.165447] 0x000001f00000-0x000001f10000 : "partition-table"
[    1.170718] 0x000001f10000-0x000001f20000 : "soft-version"
[    1.176682] 0x000001f20000-0x000001f30000 : "support-list"
[    1.181922] 0x000001f30000-0x000001f40000 : "profile"
[    1.187534] 0x000001f40000-0x000001f50000 : "default-config"
[    1.192495] 0x000001f50000-0x000001f90000 : "user-config"
[    1.198337] 0x000001f90000-0x000001fd0000 : "qos-db"
[    1.203662] 0x000001fd0000-0x000001fe0000 : "usb-config"
[    1.208594] 0x000001fe0000-0x000002000000 : "log"
[    1.215378] libphy: GPIO Bitbanged MDIO: probed
[    1.242264] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
[    2.144777] libphy: Fixed MDIO Bus: probed
[    2.147316] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
[    2.148219] stmmac - user ID: 0x10, Synopsys ID: 0x37
[    2.154379] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
[    2.159329] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
[    2.165485] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
[    2.173480] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
[    2.180941] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
[    2.188081] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
[    2.195942] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
[    2.201686] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
[    2.209161] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.218463] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
[    2.224809] stmmac - user ID: 0x10, Synopsys ID: 0x37
[    2.230766] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
[    2.235901] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
[    2.241880] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
[    2.249956] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
[    2.257495] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
[    2.264547] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
[    2.272344] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
[    2.278258] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
[    2.285633] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    2.293353] i2c /dev entries driver
[    2.302121] Calibration not found.
[    2.304194] qcom-tsens 900000.thermal-sensor: tsens calibration failed
[    2.309247] Speed bin: 0
[    2.314198] PVS bin: 1
[    2.318590] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[    2.319052] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
[    2.326951] sdhci: Secure Digital Host Controller Interface driver
[    2.333546] sdhci: Copyright(c) Pierre Ossman
[    2.339698] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.346678] NET: Registered protocol family 10
[    2.351983] Segment Routing with IPv6
[    2.354351] NET: Registered protocol family 17
[    2.357919] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    2.362805] 8021q: 802.1Q VLAN Support v1.8
[    2.375446] Registering SWP/SWPB emulation handler
[    2.396339] qcom_rpm 108000.rpm: RPM firmware 3.0.16777342
[    2.410146] s1a: supplied by regulator-dummy
[    2.410266] s1a: Bringing 0uV into 1050000-1050000uV
[    2.414005] s1b: supplied by regulator-dummy
[    2.418512] s1b: Bringing 0uV into 1050000-1050000uV
[    2.423205] s2a: supplied by regulator-dummy
[    2.427715] s2a: Bringing 0uV into 800000-800000uV
[    2.432251] s2b: supplied by regulator-dummy
[    2.436685] s2b: Bringing 0uV into 800000-800000uV
[    2.447060] hctosys: unable to open rtc device (rtc0)
[    2.456384] random: fast init done
[    2.457088] VFS: Mounted root (squashfs filesystem) readonly on device 31:12.
[    2.459489] Freeing unused kernel memory: 1024K
[    3.255983] random: crng init done
[    3.412989] init: Console is alive
[    3.413123] init: - watchdog -
[    5.954409] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    6.028292] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    6.030402] SCSI subsystem initialized
[    6.036363] libata version 3.00 loaded.
[    6.039499] ehci-platform: EHCI generic platform driver
[    6.042166] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    6.044052] ohci-platform: OHCI generic platform driver
[    6.181693] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.181772] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    6.186478] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[    6.193801] xhci-hcd xhci-hcd.0.auto: irq 106, io mem 0x11000000
[    6.203079] hub 1-0:1.0: USB hub found
[    6.208676] hub 1-0:1.0: 1 port detected
[    6.212327] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    6.216283] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    6.221494] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
[    6.229209] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.236064] hub 2-0:1.0: USB hub found
[    6.244069] hub 2-0:1.0: 1 port detected
[    6.247784] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    6.251622] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    6.257125] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x02010010
[    6.264559] xhci-hcd xhci-hcd.1.auto: irq 107, io mem 0x10000000
[    6.273636] hub 3-0:1.0: USB hub found
[    6.279430] hub 3-0:1.0: 1 port detected
[    6.283196] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    6.287035] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    6.292328] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0  SuperSpeed
[    6.300013] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    6.306918] hub 4-0:1.0: USB hub found
[    6.314928] hub 4-0:1.0: 1 port detected
[    6.321037] usbcore: registered new interface driver usb-storage
[    6.322535] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    6.331783] init: - preinit -
[    8.521334] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
[    8.522043] dwmac1000: Master AXI performs any burst length
[    8.530327] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[    8.535775] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[    8.545229] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[    9.593343] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[    9.595188] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[   11.718892] mount_root: loading kmods from internal overlay
[   11.754528] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[   11.756090] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[   14.055176] jffs2_scan_eraseblock(): End of filesystem marker found at 0x10000
[   14.055223] jffs2_build_filesystem(): unlocking the mtd device...
[   14.055227] done.
[   14.067512] jffs2_build_filesystem(): erasing all blocks after the end marker...
[  192.640147] done.
[  192.646699] jffs2: notice: (143) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[  192.649647] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[  192.664194] block: unable to load configuration (fstab: Entry not found)
[  192.670723] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[  192.677762] block: unable to load configuration (fstab: Entry not found)
[  192.683990] block: attempting to load /etc/config/fstab
[  192.692412] block: unable to load configuration (fstab: Entry not found)
[  192.695693] block: no usable configuration
[  193.138298] jffs2: notice: (141) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[  195.190268] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[  195.190358] block: unable to load configuration (fstab: Entry not found)
[  195.196176] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[  195.203037] block: unable to load configuration (fstab: Entry not found)
[  195.209254] block: attempting to load /etc/config/fstab
[  195.216044] block: unable to load configuration (fstab: Entry not found)
[  195.220883] block: no usable configuration
[  195.277363] mount_root: overlay filesystem has not been fully initialized yet
[  195.281282] mount_root: switching to jffs2 overlay
[  195.317201] overlayfs: upper fs does not support tmpfile.
[  196.168079] urandom-seed: Seed file not found (/etc/urandom.seed)
[  196.302316] procd: - early -
[  196.302492] procd: - watchdog -
[  196.976305] procd: - watchdog -
[  196.976646] procd: - ubus -
[  197.030046] procd: - init -
[  197.253232] kmodloader: loading kernel modules from /etc/modules.d/*
[  197.266243] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[  197.271012] tun: Universal TUN/TAP device driver, 1.6
[  197.277797] ip6_tables: (C) 2000-2006 Netfilter Core Team
[  197.556976] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[  197.557011] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[  197.572245] batman_adv: B.A.T.M.A.N. advanced 2018.1 (compatibility version 15) loaded
[  197.576086] u32 classifier
[  197.579042]     input device check on
[  197.581735]     Actions configured
[  197.586604] Mirror/redirect action on
[  197.603502] Ebtables v2.0 registered
[  197.604189] hso: drivers/net/usb/hso.c: Option Wireless
[  197.606216] usbcore: registered new interface driver hso
[  197.612085] ip_tables: (C) 2000-2006 Netfilter Core Team
[  197.617360] usbcore: registered new interface driver ipheth
[  197.928305] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[  198.154558] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[  198.154760] usbcore: registered new interface driver pegasus
[  198.163124] usbcore: registered new interface driver r8152
[  198.168610] usbcore: registered new interface driver ums-alauda
[  198.173875] usbcore: registered new interface driver ums-cypress
[  198.178658] usbcore: registered new interface driver ums-datafab
[  198.184719] usbcore: registered new interface driver ums-freecom
[  198.190690] usbcore: registered new interface driver ums-isd200
[  198.196804] usbcore: registered new interface driver ums-jumpshot
[  198.202301] usbcore: registered new interface driver ums-karma
[  198.208816] usbcore: registered new interface driver ums-sddr09
[  198.214465] usbcore: registered new interface driver ums-sddr55
[  198.220217] usbcore: registered new interface driver ums-usbat
[  198.228738] usbcore: registered new interface driver usbserial
[  198.231294] usbcore: registered new interface driver usbserial_generic
[  198.237189] usbserial: USB Serial support registered for generic
[  198.251756] xt_time: kernel timezone is -0000
[  198.252523] usbcore: registered new interface driver asix
[  198.261099] ath10k_pci 0000:01:00.0: assign IRQ: got 66
[  198.261661] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[  198.261744] ath10k_pci 0000:01:00.0: enabling bus mastering
[  198.262207] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[  198.435310] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[  198.435355] ath10k_pci 0000:01:00.0: Falling back to user helper
[  226.786177] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[  226.786216] ath10k_pci 0000:01:00.0: Falling back to user helper
[  226.831922] firmware ath10k!QCA99X0!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[  227.435578] ath10k_pci 0000:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[  227.435616] ath10k_pci 0000:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 1
[  227.445726] ath10k_pci 0000:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
[  227.508485] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 1:1 crc32 08fa09f2
[  228.772296] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[  228.855048] ath: EEPROM regdomain: 0x0
[  228.855058] ath: EEPROM indicates default country code should be used
[  228.855066] ath: doing EEPROM country->regdmn map search
[  228.855079] ath: country maps to regdmn code: 0x3a
[  228.855090] ath: Country alpha2 being used: US
[  228.855099] ath: Regpair used: 0x3a
[  228.858855] ath10k_pci 0001:01:00.0: assign IRQ: got 99
[  228.859677] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[  228.859800] ath10k_pci 0001:01:00.0: enabling bus mastering
[  228.860455] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[  229.034256] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2
[  229.034294] ath10k_pci 0001:01:00.0: Falling back to user helper
[  261.160751] ath10k_pci 0001:01:00.0: Direct firmware load for ath10k/QCA99X0/hw2.0/firmware-6.bin failed with error -2
[  261.160790] ath10k_pci 0001:01:00.0: Falling back to user helper
[  261.205298] firmware ath10k!QCA99X0!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[  261.205544] ath10k_pci 0001:01:00.0: qca99x0 hw2.0 target 0x01000000 chip_id 0x003b01ff sub 168c:0002
[  261.213298] ath10k_pci 0001:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 1
[  261.225303] ath10k_pci 0001:01:00.0: firmware ver 10.4.1.00030-1 api 5 features no-p2p crc32 d2901e01
[  261.288035] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 1:2 crc32 08fa09f2
[  262.568127] ath10k_pci 0001:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 512 raw 0 hwcrypto 1
[  262.655310] ath: EEPROM regdomain: 0x0
[  262.655319] ath: EEPROM indicates default country code should be used
[  262.655326] ath: doing EEPROM country->regdmn map search
[  262.655338] ath: country maps to regdmn code: 0x3a
[  262.655348] ath: Country alpha2 being used: US
[  262.655354] ath: Regpair used: 0x3a
[  262.660741] usbcore: registered new interface driver ax88179_178a
[  262.661924] usbcore: registered new interface driver cdc_eem
[  262.667888] usbcore: registered new interface driver cdc_ether
[  262.672774] usbcore: registered new interface driver cdc_subset
[  262.677878] usbcore: registered new interface driver dm9601
[  262.944184] usbcore: registered new interface driver ftdi_sio
[  262.944284] usbserial: USB Serial support registered for FTDI USB Serial Device
[  263.074091] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[  263.076819] usbcore: registered new interface driver pl2303
[  263.080640] usbserial: USB Serial support registered for pl2303
[  263.087877] usbcore: registered new interface driver rndis_host
[  263.093313] usbcore: registered new interface driver smsc95xx
[  263.097818] kmodloader: done loading kernel modules from /etc/modules.d/*
[  271.729441] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
[  271.730438] dwmac1000: Master AXI performs any burst length
[  271.738447] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[  271.743945] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[  271.752983] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[  271.772450] br-client: port 1(eth1.1) entered blocking state
[  271.772481] br-client: port 1(eth1.1) entered disabled state
[  271.777626] device eth1.1 entered promiscuous mode
[  271.782890] device eth1 entered promiscuous mode
[  271.802181] IPv6: ADDRCONF(NETDEV_UP): br-client: link is not ready
[  271.989499] Generic PHY fixed-0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:00, irq=POLL)
[  271.990507] dwmac1000: Master AXI performs any burst length
[  271.998524] ipq806x-gmac-dwmac 37200000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[  272.004020] ipq806x-gmac-dwmac 37200000.ethernet eth0: registered PTP clock
[  272.013458] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  272.029616] br-wan: port 1(eth0.2) entered blocking state
[  272.029655] br-wan: port 1(eth0.2) entered disabled state
[  272.034338] device eth0.2 entered promiscuous mode
[  272.039375] device eth0 entered promiscuous mode
[  272.048740] IPv6: ADDRCONF(NETDEV_UP): br-wan: link is not ready
[  272.054840] IPv6: ADDRCONF(NETDEV_UP): local-node: link is not ready
[  272.107866] IPv6: ADDRCONF(NETDEV_CHANGE): local-node: link becomes ready
[  272.141727] br-client: port 2(local-port) entered blocking state
[  272.141764] br-client: port 2(local-port) entered disabled state
[  272.174481] device local-port entered promiscuous mode
[  272.179529] br-client: port 2(local-port) entered blocking state
[  272.179563] br-client: port 2(local-port) entered forwarding state
[  272.185366] IPv6: ADDRCONF(NETDEV_CHANGE): br-client: link becomes ready
[  272.362501] batman_adv: bat0: Adding interface: primary0
[  272.362550] batman_adv: bat0: Interface activated: primary0
[  272.369274] 8021q: adding VLAN 0 to HW filter on device bat0
[  272.376022] br-client: port 3(bat0) entered blocking state
[  272.378086] br-client: port 3(bat0) entered disabled state
[  272.383776] device bat0 entered promiscuous mode
[  272.388898] br-client: port 3(bat0) entered blocking state
[  272.393694] br-client: port 3(bat0) entered forwarding state
[  272.461691] batman_adv: bat0: Interface deactivated: primary0
[  272.468621] IPv6: ADDRCONF(NETDEV_UP): primary0: link is not ready
[  272.470342] batman_adv: bat0: Interface activated: primary0
[  272.792919] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[  272.863019] batman_adv: bat0: No IGMP Querier present - multicast optimizations disabled
[  272.863051] batman_adv: bat0: No MLD Querier present - multicast optimizations disabled
[  272.963974] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  272.964742] br-client: port 3(bat0) entered disabled state
[  272.969099] br-client: port 2(local-port) entered disabled state
[  273.032961] ipq806x-gmac-dwmac 37200000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[  273.106409] device bat0 left promiscuous mode
[  273.106496] br-client: port 3(bat0) entered disabled state
[  273.111418] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  273.116908] device eth1.1 left promiscuous mode
[  273.121305] device eth1 left promiscuous mode
[  273.126040] br-client: port 1(eth1.1) entered disabled state
[  273.141132] br-wan: port 1(eth0.2) entered blocking state
[  273.141167] br-wan: port 1(eth0.2) entered forwarding state
[  273.147168] IPv6: ADDRCONF(NETDEV_CHANGE): br-wan: link becomes ready
[  273.158297] IPv6: ADDRCONF(NETDEV_UP): eth1.1: link is not ready
[  273.207857] device local-port left promiscuous mode
[  273.207956] br-client: port 2(local-port) entered disabled state
[  273.213425] IPv6: ADDRCONF(NETDEV_UP): local-port: link is not ready
[  273.269013] br-client: port 1(bat0) entered blocking state
[  273.269051] br-client: port 1(bat0) entered disabled state
[  273.293740] device bat0 entered promiscuous mode
[  273.298743] Generic PHY fixed-0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=fixed-0:01, irq=POLL)
[  273.299756] dwmac1000: Master AXI performs any burst length
[  273.307777] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[  273.313254] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[  273.322198] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[  273.376237] br-client: port 2(eth1.1) entered blocking state
[  273.376285] br-client: port 2(eth1.1) entered disabled state
[  273.381320] device eth1.1 entered promiscuous mode
[  273.386768] device eth1 entered promiscuous mode
[  273.397627] br-client: port 3(local-port) entered blocking state
[  273.397660] br-client: port 3(local-port) entered disabled state
[  273.405188] device local-port entered promiscuous mode
[  273.410279] br-client: port 3(local-port) entered blocking state
[  273.413749] br-client: port 3(local-port) entered forwarding state
[  273.419865] br-client: port 1(bat0) entered blocking state
[  273.425866] br-client: port 1(bat0) entered forwarding state
[  273.793194] ath: EEPROM regdomain: 0x8114
[  273.793202] ath: EEPROM indicates we should expect a country code
[  273.793207] ath: doing EEPROM country->regdmn map search
[  273.793211] ath: country maps to regdmn code: 0x37
[  273.793220] ath: Country alpha2 being used: DE
[  273.793228] ath: Regpair used: 0x37
[  273.793239] ath: regdomain 0x8114 dynamically updated by user
[  273.793269] ath: EEPROM regdomain: 0x8114
[  273.793274] ath: EEPROM indicates we should expect a country code
[  273.793278] ath: doing EEPROM country->regdmn map search
[  273.793282] ath: country maps to regdmn code: 0x37
[  273.793286] ath: Country alpha2 being used: DE
[  273.793290] ath: Regpair used: 0x37
[  273.793295] ath: regdomain 0x8114 dynamically updated by user
[  274.392827] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[  274.392907] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[  274.404192] br-client: port 2(eth1.1) entered blocking state
[  274.406770] br-client: port 2(eth1.1) entered forwarding state
[  276.962737] IPv6: ADDRCONF(NETDEV_UP): client0: link is not ready
[  278.514303] IPv6: ADDRCONF(NETDEV_UP): client1: link is not ready
[  278.514626] br-client: port 4(client0) entered blocking state
[  278.519381] br-client: port 4(client0) entered disabled state
[  278.525558] device client0 entered promiscuous mode
[  278.567612] br-client: port 5(client1) entered blocking state
[  278.567644] br-client: port 5(client1) entered disabled state
[  278.572825] device client1 entered promiscuous mode
[  278.939336] batman_adv: bat0: Changing gw mode from: off to: client
[  278.939619] batman_adv: bat0: hop_penalty: Changing from: 30 to: 15
[  278.944866] batman_adv: bat0: multicast_mode: Changing from: enabled to: disabled
[  278.950910] batman_adv: bat0: orig_interval: Changing from: 1000 to: 5000
[  278.999722] IPv6: ADDRCONF(NETDEV_CHANGE): client0: link becomes ready
[  278.999951] br-client: port 4(client0) entered blocking state
[  279.005268] br-client: port 4(client0) entered forwarding state
[  279.409171] ath10k_pci 0000:01:00.0: must load driver with rawmode=1 to add mesh interfaces
[  279.413144] batman_adv: bat0: Adding interface: mesh-vpn
[  279.416334] batman_adv: bat0: The MTU of interface mesh-vpn is too small (1312) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[  279.423784] batman_adv: bat0: Interface activated: mesh-vpn
[  279.495038] IPv6: ADDRCONF(NETDEV_CHANGE): client1: link becomes ready
[  279.495275] br-client: port 5(client1) entered blocking state
[  279.500475] br-client: port 5(client1) entered forwarding state
[  279.632599] ath10k_pci 0001:01:00.0: must load driver with rawmode=1 to add mesh interfaces
[  283.612844] batman_adv: bat0: IGMP Querier appeared
[  283.612890] batman_adv: bat0: MLD Querier appeared
[  303.193544] NOHZ: local_softirq_pending 08
[  323.674153] NOHZ: local_softirq_pending 08
[  364.634429] NOHZ: local_softirq_pending 08
[  385.112246] NOHZ: local_softirq_pending 08
[  405.590393] NOHZ: local_softirq_pending 08
[  426.069736] NOHZ: local_softirq_pending 08

/etc/config/wireless

config wifi-device 'radio0'
	option type 'mac80211'
	option hwmode '11a'
	option path 'soc/1b500000.pci/pci0000:00/0000:00:00.0/0000:01:00.0'
	option htmode 'VHT20'
	option country 'DE'
	option channel '48'

config wifi-device 'radio1'
	option type 'mac80211'
	option hwmode '11g'
	option path 'soc/1b700000.pci/pci0001:00/0001:00:00.0/0001:01:00.0'
	option htmode 'HT20'
	option country 'DE'
	option channel '5'
	list supported_rates '6000'
	list supported_rates '9000'
	list supported_rates '12000'
	list supported_rates '18000'
	list supported_rates '24000'
	list supported_rates '36000'
	list supported_rates '48000'
	list supported_rates '54000'
	list basic_rate '6000'
	list basic_rate '9000'
	list basic_rate '18000'
	list basic_rate '36000'
	list basic_rate '54000'

config wifi-iface 'mesh_radio0'
	option ifname 'mesh0'
	option network 'mesh_radio0'
	option device 'radio0'
	option mesh_fwding '0'
	option mesh_id 'ffda-mesh-dom1'
	option mcast_rate '12000'
	option mode 'mesh'
	option disabled '0'
	option macaddr '4e:f4:24:d7:d9:d9'

config wifi-iface 'mesh_radio1'
	option ifname 'mesh1'
	option network 'mesh_radio1'
	option device 'radio1'
	option mesh_fwding '0'
	option mesh_id 'ffda-mesh-dom1'
	option mcast_rate '12000'
	option mode 'mesh'
	option disabled '0'
	option macaddr '4e:f4:24:d7:d9:dd'

config wifi-iface 'client_radio0'
	option ifname 'client0'
	option network 'client'
	option disabled '0'
	option device 'radio0'
	option mode 'ap'
	option macaddr '4e:f4:24:d7:d9:d8'
	option ssid 'darmstadt.freifunk.net'

config wifi-iface 'client_radio1'
	option ifname 'client1'
	option network 'client'
	option disabled '0'
	option device 'radio1'
	option mode 'ap'
	option macaddr 'ec:08:6b:24:c2:54'
	option ssid 'darmstadt.freifunk.net'

ip a

19: mesh1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether 4e:f4:24:d7:d9:dd brd ff:ff:ff:ff:ff:ff
20: mesh0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    link/ether 4e:f4:24:d7:d9:d9 brd ff:ff:ff:ff:ff:ff

[Noodlesalat]

This looks interesting to me:

Thu Apr 12 08:00:16 2018 kern.warn kernel: [ 279.632599] ath10k_pci 0001:01:00.0: must load driver with rawmode=1 to add mesh interfaces

[rotanid]

it does. but at this point, i'm out of ideas, i did my part to get the relevant information into this issue...

[neocturne]

That's an indicator that the ath10k driver/firmware do not support 11s. Moving from the -ct driver/firmware to the QCA version should help.

[Casey1979]

I did some test again too but with Mesh and Privatewifi instead of Clientwifi because the Networks are still under attack which required MFP and Encryption.
Clientnetwork alone works with every combination of Firmware and Driver.
Meshnetwork alone works with either Driver but needs the CT-Firmware because the QCA 9980 Firmware has still no 11s Support as it seems.
Mesh+Privatewifi together works with either Driver but has Problems with the Clients connecting unreliable while Mesh still works.
The cause is still unknown, i tried to test with old Ledefirmwares but Openwrt doesn't accept the old ones, i didn't force it though.
It may be either the CT-Firmware or a Problem in OpenWRT, maybe it came with 18.06 because i think it wouldn't have been gone unnoticed if this Bug existed during the testing with the Lede based Firmwares.
Btw. VHT Support without Client or Private Network doesn't seem to work either, probably never worked.

[Noodlesalat]

The problem described above still occurs with Gluon 2018.1
We should mark ipq806x as broken.

[rotanid]

@Casey1979 you reported in May, that everything was working. #1088 (comment)
can one of you try again with a firmware from back then to double check this?
if it way working before, we have a good chance to fix it.

[Casey1979]

Some days ago i took the c2600 offline and spent some hours trying to retest older Firmwares with a forced downgrade and reconfiguration but didn't get MFP to work again with the older Firmwares and i at least at the moment can't test without it because the bug is indistinguishable from deauth- and other severe attacks and targeted disturbances. Lately most of the Hardware is mostly offline or mesh only anyway to put noone at risk.
So i am sorry about it but someone else needs to do it because at the moment i can't retest until the authorities catch and shut them down.

[rotanid]

in that case, we should mark the device/target as broken again, yes....

[rotanid]

@kpanic23 on IRC you reported that you don't have any problems with the c2600 - have you tried a rather new build, if not, which commit is your current build based on?