### Set the root password
ROOT_PASSWORD=1234qwer

### Network configuration
# Don't forget to also fill the file wpa_supplicant.conf for the wifi configuration
IP=192.168.1.253
NETMASK=255.255.255.0
GATEWAY=192.168.1.1

### Led color after full boot
# The sequence will be : 
# - orange : startup
# - blue blinking : configuration
# - blue : configuration finished, camera ready
# - ??? : color set a few seconds after the camera is ready

# values :
#    -boff -bfast : blue blinking
#    -boff -bon : blue on    
#    -boff -boff : blue off   
#    -boff -yfast : yellow blinking  
#    -boff -yon : yellow on    
#    -boff -yoff : yellow off 
LED_WHEN_READY=-boff -bon

### Timezone
TIMEZONE=GMT+1

### NTP server
NTP_SERVER=0.uk.pool.ntp.org

### Debug
# Debug mode, keep it to 'no' unless you known what you do
# Values : yes|no
DEBUG=no