Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Browse files

dummy udev update to satify desktop goodies

  • Loading branch information...
commit 4a9c2337d220b399e936b72ad4f9c0ba96f63140 1 parent 6097581
@angryvincent angryvincent authored
View
26 sys-fs/udev/files/171-r5/blacklist
@@ -0,0 +1,26 @@
+# This file lists modules which will not be loaded by udev,
+# not at coldplugging and not on hotplug events.
+
+# Add your own entries to this file
+# in the format "blacklist <name of module>"
+
+# Some examples:
+# evbug is a debug tool and should be loaded explicitly
+blacklist evbug
+
+# Autoloading eth1394 most of the time re-orders your network
+# interfaces, and with buggy kernel 2.6.21, udev persistent-net
+# is not able to rename these devices, so you get eth?_rename devices
+# plus an exceeded 30sec boot timeout
+blacklist eth1394
+
+# You probably want this to not get the console beep loud on every tab :)
+#blacklist pcspkr
+
+# these drivers are very simple, the HID drivers are usually preferred
+#blacklist usbmouse
+#blacklist usbkbd
+
+# Sometimes loading a framebuffer driver at boot gets the console black
+#install pci:v*d*sv*sd*bc03sc*i* /bin/true
+
View
25 sys-fs/udev/files/171-r5/move_tmp_persistent_rules.sh
@@ -0,0 +1,25 @@
+#!/bin/sh
+# Copyright 1999-2007 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+. /etc/init.d/functions.sh
+
+# store persistent-rules that got created while booting
+# when / was still read-only
+store_persistent_rules() {
+ local file dest
+
+ for file in /dev/.udev/tmp-rules--*; do
+ dest=${file##*tmp-rules--}
+ [ "$dest" = '*' ] && break
+ type=${dest##70-persistent-}
+ type=${type%%.rules}
+ ebegin "Saving udev persistent ${type} rules to /etc/udev/rules.d"
+ cat "$file" >> /etc/udev/rules.d/"$dest" && rm -f "$file"
+ eend $? "Failed moving persistent rules!"
+ done
+}
+
+store_persistent_rules
+
+# vim:ts=4
View
34 sys-fs/udev/files/171-r5/net.sh
@@ -0,0 +1,34 @@
+#!/bin/sh
+#
+# net.sh: udev external RUN script
+#
+# Copyright 2007 Roy Marples <uberlord@gentoo.org>
+# Distributed under the terms of the GNU General Public License v2
+
+IFACE=$1
+ACTION=$2
+
+SCRIPT=/etc/init.d/net.$IFACE
+
+# ignore interfaces that are registered after being "up" (?)
+case ${IFACE} in
+ ppp*|ippp*|isdn*|plip*|lo*|irda*|dummy*|ipsec*|tun*|tap*|br*)
+ exit 0 ;;
+esac
+
+# stop here if coldplug is disabled, Bug #206518
+if [ "${do_not_run_plug_service}" = 1 ]; then
+ exit 0
+fi
+
+if [ ! -x "${SCRIPT}" ] ; then
+ #do not flood log with messages, bug #205687
+ #logger -t udev-net.sh "${SCRIPT}: does not exist or is not executable"
+ exit 1
+fi
+
+# If we're stopping then sleep for a bit in-case a daemon is monitoring
+# the interface. This to try and ensure we stop after they do.
+[ "${ACTION}" == "stop" ] && sleep 2
+
+IN_HOTPLUG=1 "${SCRIPT}" --quiet "${ACTION}"
View
17 sys-fs/udev/files/171-r5/pnp-aliases
@@ -0,0 +1,17 @@
+# /etc/modprobe.d/pnp-aliases
+#
+# These aliases are used by this udev-rule:
+# SUBSYSTEM=="pnp", ENV{MODALIAS}!="?*", RUN+="/bin/sh -c '/sbin/modprobe -a $$(while read id; do echo pnp:d$$id; done < /sys$devpath/id)'"
+#
+# They should help to autoload drivers used by various pnp-devices
+# (if not blacklisted somewhere else)
+#
+alias pnp:dPNP0510 irtty-sir
+alias pnp:dPNP0511 irtty-sir
+alias pnp:dPNP0700 floppy
+alias pnp:dPNP0800 pcspkr
+alias pnp:dPNP0b00 rtc
+alias pnp:dPNP0303 atkbd
+alias pnp:dPNP0f13 psmouse
+alias pnp:dPNPb02f analog
+
View
71 sys-fs/udev/files/171-r5/shell-compat-addon.sh
@@ -0,0 +1,71 @@
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+# functions that may not be defined, but are used by the udev-start and udev-stop addon
+# used by baselayout-1 and openrc before version 0.4.0
+
+cmd_exist()
+{
+ type "$1" >/dev/null 2>&1
+}
+
+# does not exist in baselayout-1, does exist in openrc
+if ! cmd_exist yesno; then
+ yesno() {
+ [ -z "$1" ] && return 1
+ case "$1" in
+ yes|Yes|YES) return 0 ;;
+ esac
+ return 1
+ }
+fi
+
+# does not exist in baselayout-1, does exist in openrc
+#
+# mountinfo <path>
+# check if some filesystem is mounted at mountpoint <path>
+#
+# return value:
+# 0 filesystem is mounted at <path>
+# 1 no filesystem is mounted exactly at <path>
+if ! cmd_exist mountinfo; then
+ mountinfo() {
+ [ "$1" = "-q" ] && shift
+ local dir="$1"
+
+ # check if entry is in /proc/mounts
+ local ret=$(gawk 'BEGIN { found="false"; }
+ $1 ~ "^#" { next }
+ $2 == "'$dir'" { found="true"; }
+ END { print found; }
+ ' /proc/mounts)
+
+ "${ret}"
+ }
+fi
+
+# does not exist in baselayout-1, does exist in openrc
+#
+# used syntax: fstabinfo --mount /dev
+# it should mount /dev if an entry exists in /etc/fstab
+#
+# return value:
+# 0 mount succeeded
+# 1 mount failed or no entry exists
+#
+if ! cmd_exist fstabinfo; then
+ fstabinfo() {
+ [ "$1" = "--mount" ] || return 1
+ local dir="$2"
+
+ # RC_USE_FSTAB does only exist in baselayout-1
+ # this emulation is only needed on bl-1, so check always
+ yesno "${RC_USE_FSTAB}" || return 1
+
+ # no need to check fstab, mount does this already for us
+
+ # try mounting - better first check fstab and then mount without surpressing errors
+ mount -n "${dir}" 2>/dev/null
+ return $?
+ }
+fi
View
71 sys-fs/udev/files/171-r5/shell-compat.sh
@@ -0,0 +1,71 @@
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+cmd_exist()
+{
+ type "$1" >/dev/null 2>&1
+}
+
+if ! cmd_exist yesno; then
+ yesno() {
+ [ -z "$1" ] && return 1
+ case "$1" in
+ yes|Yes|YES) return 0 ;;
+ esac
+ return 1
+ }
+fi
+
+if ! cmd_exist KV_to_int; then
+ KV_to_int() {
+ [ -z $1 ] && return 1
+
+ local x=${1%%-*}
+ local KV_MAJOR=${x%%.*}
+ x=${x#*.}
+ local KV_MINOR=${x%%.*}
+ x=${x#*.}
+ local KV_MICRO=${x%%.*}
+ local KV_int=$((${KV_MAJOR} * 65536 + ${KV_MINOR} * 256 + ${KV_MICRO} ))
+
+ # We make version 2.2.0 the minimum version we will handle as
+ # a sanity check ... if its less, we fail ...
+ [ "${KV_int}" -lt 131584 ] && return 1
+
+ echo "${KV_int}"
+ }
+fi
+
+if ! cmd_exist get_KV; then
+ _RC_GET_KV_CACHE=""
+ get_KV() {
+ [ -z "${_RC_GET_KV_CACHE}" ] \
+ && _RC_GET_KV_CACHE="$(uname -r)"
+
+ echo "$(KV_to_int "${_RC_GET_KV_CACHE}")"
+
+ return $?
+ }
+fi
+
+if ! cmd_exist fstabinfo; then
+ fstabinfo() {
+ [ "$1" = "--quiet" ] && shift
+ local dir="$1"
+
+ # only check RC_USE_FSTAB on baselayout-1
+ if [ ! -e /lib/librc.so ]; then
+ yesno "${RC_USE_FSTAB}" || return 1
+ fi
+
+ # check if entry is in /etc/fstab
+ local ret=$(gawk 'BEGIN { found="false"; }
+ $1 ~ "^#" { next }
+ $2 == "'$dir'" { found="true"; }
+ END { print found; }
+ ' /etc/fstab)
+
+ "${ret}"
+ }
+fi
+
View
91 sys-fs/udev/files/171-r5/udev-mount.initd
@@ -0,0 +1,91 @@
+#!/sbin/runscript
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+description="Mount /dev and let udev create the device-nodes"
+
+depend()
+{
+ keyword -openvz -vserver -lxc
+ provide dev
+ need sysfs
+ before checkfs fsck
+}
+
+start() {
+ if [ "$(cat /proc/mounts | cut -f2 -d" " | grep "^/dev$")" != "" ]
+ then
+ einfo "udev: /dev already mounted, skipping..."
+ return
+ fi
+ if [ -e /etc/conf.d/udev ]
+ then
+ . /etc/conf.d/udev
+ fi
+
+ ebegin "udev: Mounting /dev"
+ if fstabinfo --quiet /dev; then
+ # if defined in /etc/fstab, use those options:
+ mount -n /dev
+ else
+ # otherwise, automatically mount using these options:
+ # Some devices require exec, Bug #92921
+ mount -n -t tmpfs -o "exec,nosuid,mode=0755,size=10M" udev /dev
+ fi
+ eend $?
+
+ touch /dev/.rcsysinit
+
+ # SELINUX STUFF
+
+ if [ -x /sbin/restorecon -a -c /selinux/null ]; then
+ restorecon /dev > /selinux/null
+ fi
+
+ # DEVICE TARBALL STUFF
+
+ local tarball_file=/lib/udev/state/devices.tar.bz2
+ if yesno "${device_tarball}" && [ -s "${tarball_file}" ]
+ then
+ ebegin "udev: Populating /dev with saved device nodes"
+ tar xpf "${tarball_file}" -C /dev
+ eend $?
+ fi
+
+ # copy over any persistant things
+ if [ -d /lib/udev/devices ]; then
+ cp -RPp /lib/udev/devices/* /dev 2>/dev/null
+ fi
+
+ # Create problematic directories
+ mkdir -p /dev/pts /dev/shm
+
+ if [ -e /proc/sys/kernel/hotplug ]; then
+ echo "" >/proc/sys/kernel/hotplug
+ fi
+
+ if [ -e /lib/udev/write_root_link_rule ]
+ then
+ /lib/udev/write_root_link_rule
+ else
+ /lib/udev/write_root_link_rule
+ fi
+
+ # this function disables rules files
+ # by creating new files with the same name
+ # in a temp rules directory with higher priority
+ local d=/dev/.udev/rules.d
+ if yesno "${persistent_net:-yes}"; then
+ ewarn "udev: Persistent network rules enabled in /etc/conf.d/udev"
+ else
+ mkdir -p "$d"
+ echo "# This file disables persistent-net due to /etc/conf.d/udev" > "$d"/75-persistent-net-generator.rules
+ fi
+
+ # load unix domain sockets if built as module, Bug #221253
+ if [ -e /proc/modules ] ; then
+ modprobe -q unix 2>/dev/null
+ fi
+
+ return 0
+}
View
27 sys-fs/udev/files/171-r5/udev-postmount.initd
@@ -0,0 +1,27 @@
+#!/sbin/runscript
+# Copyright 1999-2007 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/udev/files/udev-postmount-130-r2.initd,v 1.1 2008/10/28 21:59:05 zzam Exp $
+
+depend() {
+ keyword -openvz -vserver -lxc
+ need udev-mount localmount
+}
+
+start() {
+ # check if this system uses udev
+ [ -d /dev/.udev/ ] || return 0
+
+ ebegin "udev: storing persistent rules"
+
+ # store persistent-rules that got created while booting
+ # when / was still read-only
+ /lib/udev/move_tmp_persistent_rules.sh
+ eend $?
+}
+
+stop() {
+ :
+}
+
+# vim:ts=4
View
86 sys-fs/udev/files/171-r5/udev-save.initd
@@ -0,0 +1,86 @@
+#!/sbin/runscript
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+description="Save device nodes to a persistent tarball"
+
+depend()
+{
+ keyword -openvz -vserver -lxc
+ before mount-ro killprocs
+}
+
+start() {
+ /lib/udev/move_tmp_persistent_rules.sh
+ tarball_file=/lib/udev/state/devices.tar.bz2
+ if [ -e /etc/conf.d/udev ]
+ then
+ . /etc/conf.d/udev
+ fi
+ device_tarball=${device_tarball:-${RC_DEVICE_TARBALL:-NO}}
+ if ! yesno "${device_tarball}"
+ then
+ ebegin "udev: Device tarball disabled, skipping"
+ eend 0
+ return 0
+ fi
+ ebegin "Saving device nodes"
+ if ! touch "${tarball_file}"
+ then
+ eend 1 "udev: Couldn't write to device tarball."
+ return 1
+ fi
+ if [ -e /dev/.devfsd ] || [ ! -e /dev/.udev ]
+ then
+ eend 1 "udev: Device tarball enabled but udev filesystem not found"
+ fi
+
+ # Handle our temp files
+ save_tmp_base=/tmp/udev.savedevices."$$"
+ devices_udev="${save_tmp_base}"/devices.udev
+ devices_real="${save_tmp_base}"/devices.real
+ devices_totar="${save_tmp_base}"/devices.totar
+ device_tmp_tarball="${save_tmp_base}"/devices
+
+ rm -rf "${save_tmp_base}"
+ mkdir "${save_tmp_base}"
+ touch "${devices_udev}" "${devices_real}" "${devices_totar}" "${device_tmp_tarball}"
+
+ if ! [ -f "${devices_udev}" -a -f "${devices_real}" -a -f "${devices_totar}" -a -f "${device_tmp_tarball}" ]
+ then
+ eend 1 "udev: Couldn't create temporary files for device tarball"
+ return 1
+ fi
+
+ cd /dev
+ # Find all devices, but ignore .udev directory
+ find . -xdev -type b -or -type c -or -type l | cut -d/ -f2- | grep -v ^\\.udev >"${devices_real}"
+
+ # Figure out what udev created
+ udevadm info --export-db | sed -ne 's,^[SN]: \(.*\),\1,p' >"${devices_udev}"
+
+ # These ones we also do not want in there
+ for x in MAKEDEV core fd initctl pts shm stderr stdin stdout root; do
+ echo "${x}" >> "${devices_udev}"
+ done
+ if [ -d /lib/udev/devices ]; then
+ cd /lib/udev/devices
+ find . -xdev -type b -or -type c -or -type l | cut -d/ -f2- >> "${devices_udev}"
+ cd /dev
+ fi
+
+ fgrep -x -v -f "${devices_udev}" "${devices_real}" > "${devices_totar}"
+
+ # Now only tarball those not created by udev if we have any
+ if [ -s "${devices_totar}" ]; then
+ # we dont want to descend into mounted filesystems (e.g. devpts)
+ # looking up username may involve NIS/network
+ # and net may be down
+ tar --one-file-system --numeric-owner -jcpf "${device_tmp_tarball}" -T "${devices_totar}"
+ mv -f "${device_tmp_tarball}" "${tarball_file}"
+ else
+ rm -f "${tarball_file}"
+ fi
+ eend 0
+ einfo "udev: Device tarball created."
+}
View
25 sys-fs/udev/files/171-r5/udev.confd
@@ -0,0 +1,25 @@
+# /etc/conf.d/udev: config file for udev
+
+# Coldplug should be enabled for proper hardware detection and
+# module-autoloading. Normally, you will want this enabled. If
+# you need to disable it temporarily, you can either do so
+# below or use the "nocoldplug" kernel boot option.
+
+coldplug="yes"
+
+# Persistent_net will ensure that your network interface names
+# don't change. However, it can be disabled if you are planning
+# to change your hardware. This will prevent your new hardware
+# from showing up as eth1, eth2, etc. Some people prefer it
+# disabled. Recommended enabled unless you prefer otherwise.
+
+persistent_net="yes"
+
+# If you set the device_tarball option to yes, then
+# prior to system shutdown, the state of /dev will be backed up
+# to an archive and restored when your system boots. This is
+# useful if you need to manually create device nodes and don't
+# want to keep repeating yourself. Disabled by default.
+
+device_tarball="no"
+
View
72 sys-fs/udev/files/171-r5/udevd.initd
@@ -0,0 +1,72 @@
+#!/sbin/runscript
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+depend() {
+ keyword -openvz -vserver
+ need udev-mount
+ before checkfs fsck
+}
+
+start() {
+ ebegin "Starting udevd daemon"
+ start-stop-daemon --start --exec /sbin/udevd -- --daemon
+ if [ $? -ne 0 ]
+ then
+ eend 1
+ return 1
+ fi
+
+ # By default, we want coldplug enabled. "coldplug" means that
+ # udev will scan the system for already-connected hardware and
+ # generate synthetic/pretend connection events, which will help
+ # to load the correct modules, when, for example, you try to
+ # bring up your eth0 interface and it depends on a module that
+ # is not currently loaded.
+
+ local coldplug="yes"
+
+ if [ -e /etc/conf.d/udev ]
+ then
+ . /etc/conf.d/udev
+ fi
+
+ # coldplug can be disabled by the "nocoldplug" kernel boot
+ # parameter.
+
+ if get_bootparam "nocoldplug" ; then
+ coldplug="NO"
+ ewarn "Skipping udev coldplug as requested in kernel cmdline"
+ fi
+
+ ebegin "Populating /dev with existing devices through uevents"
+ if yesno "${coldplug}"; then
+ # perform full coldplug:
+ udevadm trigger
+ else
+ # do not perform a full coldplug:
+ # Do not run any init-scripts, Bug #206518
+ udevadm control --env do_not_run_plug_service=1
+ # only create device nodes
+ udevadm trigger --attr-match=dev
+ # run persistent-net stuff, bug 191466
+ udevadm trigger --subsystem-match=net
+ fi
+ udevadm settle --timeout=60
+ eend $?
+
+ udevadm control --env do_not_run_plug_service=
+ # should exist on every system, else udev failed
+ if [ ! -e /dev/zero ]; then
+ eerror "Assuming udev failed somewhere, as /dev/zero does not exist."
+ return 1
+ fi
+ return 0
+
+}
+
+stop() {
+ ebegin "Stopping udevd daemon"
+ start-stop-daemon --stop /sbin/udevd
+ eend $?
+}
View
29 sys-fs/udev/files/171-r5/write_root_link_rule
@@ -0,0 +1,29 @@
+#!/bin/sh
+#
+# This script should run before doing udevtrigger at boot.
+# It will create a rule matching the device directory / is on, and
+# creating /dev/root symlink pointing on its device node.
+#
+# This is especially useful for hal looking at /proc/mounts containing
+# a line listing /dev/root as device:
+# /dev/root / reiserfs rw 0 0
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation version 2 of the License.
+#
+# (c) 2007-2008 Matthias Schwarzott <zzam@gentoo.org>
+
+eval $(udevadm info --export --export-prefix="ROOT_" --device-id-of-file=/)
+
+[ $? = 0 ] || exit 0
+[ "$ROOT_MAJOR" = 0 ] && exit 0
+
+DIR=/dev/.udev/rules.d
+[ -d "$DIR" ] || mkdir -p "$DIR"
+RULES=$DIR/10-root-link.rules
+
+echo "# Created by /lib/udev/write_root_link_rule" > "${RULES}"
+echo "# This rule should create /dev/root as link to real root device." >> "${RULES}"
+echo "SUBSYSTEM==\"block\", ENV{MAJOR}==\"$ROOT_MAJOR\", ENV{MINOR}==\"$ROOT_MINOR\", SYMLINK+=\"root\"" >> "${RULES}"
+
View
263 sys-fs/udev/udev-171-r5.ebuild
@@ -0,0 +1,263 @@
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-x86/sys-fs/udev/udev-132.ebuild,v 1.1 2008/11/14 16:49:03 zzam Exp $
+
+EAPI="1"
+
+inherit eutils flag-o-matic multilib toolchain-funcs linux-info
+DESCRIPTION="Linux dynamic and persistent device naming support (aka userspace devfs)"
+HOMEPAGE="http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html"
+#PATCHSET="${P}-gentoo-patchset-v1"
+SRC_URI="mirror://kernel/linux/utils/kernel/hotplug/${P}.tar.bz2"
+
+if [ -n "$PATCHSET" ]
+then
+ SRC_URI="$SRC_URI mirror://gentoo/${PATCHSET}.tar.bz2"
+fi
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~*"
+IUSE="selinux extras +hwdb +gudev introspection"
+MIN_KERNEL="2.6.32"
+
+COMMON_DEPEND="selinux? ( sys-libs/libselinux )
+ sys-apps/acl
+ virtual/libusb:0
+ extras? ( dev-libs/gobject-introspection
+ dev-libs/glib:2 )
+ gudev? ( dev-libs/glib:2 )
+ introspection? ( dev-libs/gobject-introspection )
+ hwdb? ( sys-apps/hwids )
+ "
+DEPEND="${COMMON_DEPEND} dev-util/gperf >=sys-kernel/linux-headers-2.6.34"
+RDEPEND="${COMMON_DEPEND} !sys-apps/coldplug !<sys-fs/lvm2-2.02.45 !sys-fs/device-mapper >=sys-apps/baselayout-2.1.6"
+PROVIDE="virtual/dev-manager"
+
+pkg_setup() {
+ udev_libexec_dir="/$(get_libdir)/udev"
+ [ "$ROOT" != "/" ] && return 0
+ local fkv="$(uname -r)"
+ local kv="${fkv%-*}"
+ local k2="${kv%.*}"
+ local kmin="${kv##*.}"
+ echo $USE
+ if ! use bindist && [ "$k2" == "2.6" ] && [ "$kmin" -lt ${MIN_KERNEL##*.} ] && [ "${FEATURES/safetydance/}" = "${FEATURES}" ]
+ then
+ eerror
+ eerror "Current kernel version: $kv"
+ eerror "Minimum kernel version: ${MIN_KERNEL}"
+ eerror
+ ewarn "You are installing a version of udev that is incompatible with your"
+ ewarn "currently-running kernel. This version of udev requires a kernel"
+ ewarn "version of ${MIN_KERNEL} or greater. Please use an earlier version of udev"
+ ewarn "with your running kernel by masking this version of udev, by adding"
+ ewarn "the following line to /etc/portage/package.mask:"
+ ewarn
+ ewarn ">=sys-fs/udev-160"
+ ewarn
+ ewarn "Alternatively, you may choose to upgrade to a compatible kernel, update"
+ ewarn "your boot loader and reboot your system so that the new kernel is"
+ ewarn "active. Then this version of udev will be compatible with your kernel"
+ ewarn "and the udev merge will then proceed without warning."
+ ewarn
+ ewarn "If you know what you are doing and want to override this safety check,"
+ ewarn "add 'safetydance' to FEATURES as follows:"
+ ewarn
+ ewarn "FEATURES=\"safetydance\" emerge <emerge arguments here>"
+ ewarn
+ ewarn "This will cause this runtime safety check to be skipped."
+ die
+ fi
+ return 0
+}
+
+src_unpack() {
+ unpack ${A}
+
+ cd "${S}"
+ if [ -n "$PATCHSET" ]
+ then
+ EPATCH_SOURCE="${WORKDIR}/${PATCHSET}" EPATCH_SUFFIX="patch" EPATCH_FORCE="yes" epatch
+ fi
+
+ # change rules back to group uucp instead of dialout for now - eventually
+ # fix baselayout -
+
+ sed -e 's/GROUP="dialout"/GROUP="uucp"/' -i rules/{rules.d,arch}/*.rules || die "failed to change group dialout to uucp"
+}
+
+use_extras() { use extras && echo "--enable-${2:-$1}" || use_enable "$@" ; }
+src_compile() {
+ filter-flags -fprefetch-loop-arrays
+
+ # sys-fs/lvm2 may require static libs - generate them just to be on the safe
+ # side. shared libs get generated too.
+
+ echo $(use_extras introspection)
+
+ econf \
+ --prefix=/usr \
+ --sysconfdir=/etc \
+ --enable-static \
+ --sbindir=/sbin \
+ --libdir=/usr/$(get_libdir) \
+ --with-rootlibdir=/$(get_libdir) \
+ --libexecdir="${udev_libexec_dir}" \
+ --enable-logging \
+ --enable-hwdb \
+ --with-pci-ids-path="${EPREFIX}/usr/share/misc/pci.ids" \
+ --with-usb-ids-path="${EPREFIX}/usr/share/misc/usb.ids" \
+ $(use_extras introspection) \
+ $(use_extras gudev) \
+ $(use_enable extras) \
+ $(use_with selinux)
+
+ emake || die "compiling udev failed"
+}
+
+src_install() {
+ into /
+ emake DESTDIR="${D}" install || die "make install failed"
+
+ exeinto "${udev_libexec_dir}"
+ local x
+ for x in net.sh move_tmp_persistent_rules.sh write_root_link_rule shell-compat.sh shell-compat-addon.sh
+ do
+ doexe "${FILESDIR}/${PVR}/${x}" || die "${x} not installed properly"
+ done
+
+ keepdir "${udev_libexec_dir}"/state
+ keepdir "${udev_libexec_dir}"/devices
+
+ # Use Funtoo's "realdev" command to create initial set of device nodes in
+ # /lib/udev/devices. This set of device nodes will be copied to /dev when
+ # udev starts.
+
+ $ROOT/sbin/realdev ${D}${udev_libexec_dir}/devices || die
+
+ # create symlinks for these utilities to /sbin
+ # where multipath-tools expect them to be (Bug #168588)
+ dosym "..${udev_libexec_dir}/vol_id" /sbin/vol_id
+ dosym "..${udev_libexec_dir}/scsi_id" /sbin/scsi_id
+
+ # Add gentoo stuff to udev.conf
+ echo "# If you need to change mount-options, do it in /etc/fstab" >> "${D}"/etc/udev/udev.conf
+
+ # let the dir exist at least
+ keepdir /etc/udev/rules.d
+
+ # Now installing rules
+ cd "${S}"/rules
+ insinto "${udev_libexec_dir}"/rules.d/
+
+ # Adding arch specific rules
+ if [[ -f packages/40-${ARCH}.rules ]]
+ then
+ doins "packages/40-${ARCH}.rules"
+ fi
+ cd "${S}"
+
+ # The udev-post init-script
+ local x
+ for x in udevd udev-save udev-mount udev-postmount
+ do
+ newinitd "${FILESDIR}"/${PVR}/${x}.initd ${x} || die "initscript $x install error"
+ done
+
+ newconfd "${FILESDIR}/${PVR}/udev.confd" udev || die "udev.confd install error"
+
+ insinto /etc/modprobe.d
+ newins "${FILESDIR}/${PVR}/blacklist" blacklist.conf
+ newins "${FILESDIR}/${PVR}/pnp-aliases" pnp-aliases.conf
+
+ # keep doc in just one directory, Bug #281137
+ rm -rf "${D}/usr/share/doc/${PN}"
+ if use extras; then
+ dodoc extras/keymap/README.keymap.txt || die "failed installing docs"
+ fi
+
+ echo "CONFIG_PROTECT_MASK=\"/etc/udev/rules.d\"" > 20udev
+ doenvd 20udev
+}
+
+modfix() {
+ local mod
+
+ # We want to move any old modprobe.d conf files to the new file name so
+ # config file protection works correctly.
+
+ for mod in blacklist pnp-aliases
+ do
+ if [ -e $ROOT/etc/modprobe.d/$mod ]
+ then
+ mv $ROOT/etc/modprobe.d/$mod $ROOT/etc/modprobe.d/${mod}.conf || die "mv failed"
+ fi
+ done
+}
+
+pkg_preinst() {
+ modfix
+
+ if [[ -d ${ROOT}/lib/udev-state ]]
+ then
+ mv -f "${ROOT}"/lib/udev-state/* "${D}"/lib/udev/state/
+ rm -r "${ROOT}"/lib/udev-state
+ fi
+
+ if [[ -f ${ROOT}/etc/udev/udev.config &&
+ ! -f ${ROOT}/etc/udev/udev.rules ]]
+ then
+ mv -f "${ROOT}"/etc/udev/udev.config "${ROOT}"/etc/udev/udev.rules
+ fi
+
+ rm -f /etc/conf.d/udev #FORCE UPDATE
+}
+
+# from the openrc-0.3.0.22081113 ebuild :)
+add_init() {
+ local runl=$1
+ if [ ! -e ${ROOT}/etc/runlevels/${runl} ]
+ then
+ install -d -m0755 ${ROOT}/etc/runlevels/${runl}
+ fi
+ for initd in $*
+ do
+ # if the initscript is not going to be installed and is not currently installed, return
+ [[ -e ${D}/etc/init.d/${initd} || -e ${ROOT}/etc/init.d/${initd} ]] || continue
+ [[ -e ${ROOT}/etc/runlevels/${runl}/${initd} ]] && continue
+ elog "Auto-adding '${initd}' service to your ${runl} runlevel"
+ ln -snf /etc/init.d/${initd} "${ROOT}"/etc/runlevels/${runl}/${initd}
+ done
+}
+
+pkg_postinst() {
+ # disable coldplug script
+ rm -f $ROOT/etc/runlevels/*/coldplug
+
+ # disable any old udev script
+ rm -f $ROOT/etc/runlevels/*/udev
+
+ rm -f $ROOT/etc/runlevels/*/udev-postmount
+
+ add_init sysinit udev-mount
+ add_init sysinit udevd
+ add_init boot udev-postmount
+ add_init shutdown udev-save
+
+ # requested in Bug #225033:
+ elog
+ elog "persistent-net does assigning fixed names to network devices."
+ elog "If you prefer to disable persistent-net, this can be done via"
+ elog "/etc/conf.d/udev."
+
+ ewarn
+ ewarn "mount options for directory /dev are no longer"
+ ewarn "set in /etc/udev/udev.conf, but in /etc/fstab"
+ ewarn "as for other directories."
+
+ elog
+ elog "For more information on udev on Gentoo, writing udev rules, and"
+ elog " fixing known issues visit:"
+ elog " http://www.gentoo.org/doc/en/udev-guide.xml"
+}
Please sign in to comment.
Something went wrong with that request. Please try again.