Skip to content
Browse files

Raspberry Pi Overlay (r10)

  • Loading branch information...
1 parent e68acef commit 92043e0fafbed1ec343ccbbe0bdd225cc2e2659d @gamaral committed Jan 3, 2013
Showing with 3,747 additions and 0 deletions.
  1. +108 −0 README.md
  2. +1,024 −0 board/raspberrypi/busybox.config
  3. +11 −0 board/raspberrypi/postscript.sh
  4. 0 board/raspberrypi/skeleton/bin/.empty
  5. +356 −0 board/raspberrypi/skeleton/boot/COPYING.linux
  6. +29 −0 board/raspberrypi/skeleton/boot/LICENCE.broadcom
  7. BIN board/raspberrypi/skeleton/boot/bootcode.bin
  8. +1 −0 board/raspberrypi/skeleton/boot/cmdline.txt
  9. +46 −0 board/raspberrypi/skeleton/boot/config.txt
  10. BIN board/raspberrypi/skeleton/boot/fixup.dat
  11. BIN board/raspberrypi/skeleton/boot/start.elf
  12. 0 board/raspberrypi/skeleton/dev/input/.empty
  13. +1 −0 board/raspberrypi/skeleton/dev/log
  14. 0 board/raspberrypi/skeleton/dev/pts/.empty
  15. +10 −0 board/raspberrypi/skeleton/etc/fstab
  16. +21 −0 board/raspberrypi/skeleton/etc/group
  17. +1 −0 board/raspberrypi/skeleton/etc/hostname
  18. +3 −0 board/raspberrypi/skeleton/etc/hosts
  19. +27 −0 board/raspberrypi/skeleton/etc/init.d/S00raspberrypi.sh
  20. +54 −0 board/raspberrypi/skeleton/etc/init.d/S20urandom
  21. +25 −0 board/raspberrypi/skeleton/etc/init.d/S40network
  22. +27 −0 board/raspberrypi/skeleton/etc/init.d/rcK
  23. +27 −0 board/raspberrypi/skeleton/etc/init.d/rcS
  24. +37 −0 board/raspberrypi/skeleton/etc/inittab
  25. +44 −0 board/raspberrypi/skeleton/etc/inputrc
  26. +8 −0 board/raspberrypi/skeleton/etc/issue
  27. +2 −0 board/raspberrypi/skeleton/etc/ld.so.conf
  28. 0 board/raspberrypi/skeleton/etc/ld.so.conf.d/.empty
  29. +1 −0 board/raspberrypi/skeleton/etc/mtab
  30. 0 board/raspberrypi/skeleton/etc/network/if-down.d/.empty
  31. 0 board/raspberrypi/skeleton/etc/network/if-post-down.d/.empty
  32. 0 board/raspberrypi/skeleton/etc/network/if-pre-up.d/.empty
  33. 0 board/raspberrypi/skeleton/etc/network/if-up.d/.empty
  34. +8 −0 board/raspberrypi/skeleton/etc/network/interfaces
  35. +16 −0 board/raspberrypi/skeleton/etc/passwd
  36. +55 −0 board/raspberrypi/skeleton/etc/profile
  37. +31 −0 board/raspberrypi/skeleton/etc/protocols
  38. BIN board/raspberrypi/skeleton/etc/random-seed
  39. +1 −0 board/raspberrypi/skeleton/etc/resolv.conf
  40. +51 −0 board/raspberrypi/skeleton/etc/securetty
  41. +302 −0 board/raspberrypi/skeleton/etc/services
  42. +13 −0 board/raspberrypi/skeleton/etc/shadow
  43. 0 board/raspberrypi/skeleton/home/ftp/.empty
  44. 0 board/raspberrypi/skeleton/lib/.empty
  45. 0 board/raspberrypi/skeleton/media/.empty
  46. 0 board/raspberrypi/skeleton/mnt/.empty
  47. 0 board/raspberrypi/skeleton/opt/.empty
  48. 0 board/raspberrypi/skeleton/proc/.empty
  49. 0 board/raspberrypi/skeleton/root/.bash_history
  50. +7 −0 board/raspberrypi/skeleton/root/.bash_logout
  51. +15 −0 board/raspberrypi/skeleton/root/.bash_profile
  52. 0 board/raspberrypi/skeleton/root/.empty
  53. +1 −0 board/raspberrypi/skeleton/run
  54. 0 board/raspberrypi/skeleton/sbin/.empty
  55. 0 board/raspberrypi/skeleton/sys/.empty
  56. 0 board/raspberrypi/skeleton/tmp/.empty
  57. 0 board/raspberrypi/skeleton/usr/bin/.empty
  58. 0 board/raspberrypi/skeleton/usr/lib/.empty
  59. 0 board/raspberrypi/skeleton/usr/sbin/.empty
  60. +1 −0 board/raspberrypi/skeleton/var/cache
  61. +1 −0 board/raspberrypi/skeleton/var/lib/misc
  62. +1 −0 board/raspberrypi/skeleton/var/lib/pcmcia
  63. +1 −0 board/raspberrypi/skeleton/var/lock
  64. +1 −0 board/raspberrypi/skeleton/var/log
  65. +1 −0 board/raspberrypi/skeleton/var/pcmcia
  66. +1 −0 board/raspberrypi/skeleton/var/run
  67. +1 −0 board/raspberrypi/skeleton/var/spool
  68. +1 −0 board/raspberrypi/skeleton/var/tmp
  69. +275 −0 board/raspberrypi/uClibc.config
  70. +1,047 −0 configs/raspberrypi_defconfig
  71. +3 −0 package/Config.in
  72. +6 −0 package/raspberrypi/Config.in
  73. +1 −0 package/raspberrypi/raspberrypi.mk
  74. +7 −0 package/raspberrypi/rpi-userland/Config.in
  75. +31 −0 package/raspberrypi/rpi-userland/rpi-userland.mk
  76. +5 −0 rpi-buildroot-update.sh
View
108 README.md
@@ -0,0 +1,108 @@
+BuildRoot for Raspberry Pi
+==========================
+
+This buildroot fork will produce a very light-weight and trimmed down
+toolchain, rootfs and kernel for the Raspberry Pi. It's intended for advanced
+users and specific embedded applications.
+
+The default configuration is trimmed down but still contains a few
+applications to help with development and testing, it should be trimmed down
+further and secured before actual field deployment.
+
+Test Drive
+----------
+
+You can test drive rpi-buildroot by following the instructions below:
+
+ wget http://dl.guillermoamaral.com/rpi/sdcard.img.xz
+ xz -d sdcard.img.xz
+ sudo dd if=sdcard.img of=/dev/sdx # replace *sdx* with your actual sdcard device node
+
+The default user is **root**, no password will be requested.
+
+### Toolchain
+
+I've added a toolchain, it has everything needed to cross-compile software for
+use with the test-drive image, download and usage instructions below:
+
+ wget http://dl.guillermoamaral.com/rpi/rpi-buildroot-toolchain.tar.xz
+ tar -xvJf rpi-buildroot-toolchain.tar.xz
+ source rpi-buildroot-toolchain/env
+ $CC -I"${BUILDROOT_HOST_DIR}/usr/include" \
+ -I"${BUILDROOT_STAGING_DIR}/usr/include" \
+ -I"${BUILDROOT_STAGING_DIR}/opt/vc/include" \
+ -L"${BUILDROOT_STAGING_DIR}/opt/vc/lib" \
+ -L"${BUILDROOT_STAGING_DIR}/usr/lib" \
+ -L"${BUILDROOT_STAGING_DIR}/lib" \
+ -L"${BUILDROOT_TARGET_DIR}/opt/vc/lib" \
+ -L"${BUILDROOT_TARGET_DIR}/usr/lib" \
+ -L"${BUILDROOT_TARGET_DIR}/lib" \
+ main.c # example usage
+
+If you're interested in using the toolchain with CMake, you may want to
+download the toolchain cmake file used with Marshmallow Game Engine:
+
+ wget https://github.com/gamaral/marshmallow_h/blob/master/cmake/Toolchain-buildroot.cmake
+ # The **env** file needs to be **sourced** before executing the following command
+ cmake -DCMAKE_TOOLCHAIN_FILE=Toolchain-buildroot.cmake .
+ make
+
+Building
+--------
+
+ git clone --depth 1 git://github.com/gamaral/rpi-buildroot.git
+ cd rpi-buildroot
+ make raspberrypi_defconfig
+ make nconfig # if you want to add packages or fiddle around with it
+ make # build (NOTICE: Don't use the **-j** switch, it's set to auto-detect)
+
+Updating
+--------
+
+Since I keep this overlay fork rebased to buildroot master, you will need to
+replace your local branch completely:
+
+ git fetch origin
+ git checkout origin/rpi
+ git checkout -B rpi
+
+I added a little helper script to the base directory that can do the legwork:
+
+ ./rpi-buildroot-update.sh
+
+Deploying
+---------
+
+You will need to create two partitions in your sdcard, the first (boot) needs
+to be a small *W95 FAT32 (LBA)* patition (that's partition id **c**), about 50
+MB will do.
+
+**Notice** you will need to replace *sdx* in the following commands with the
+actual device node for your sdcard.
+
+ # run the following as root
+ mkfs.vfat -F 32 -n boot /dev/sdx1
+ mkdir -p /media/boot
+ mount /dev/sdx1 /media/boot
+
+You will need to copy all the files in *output/target/boot* to your *boot*
+partition.
+
+ # run the following as root
+ cp output/target/boot/* /media/boot
+ umount /media/boot
+
+The second (rootfs) can be as big as you want, but with a 200 MB minimum,
+and formated as *ext4*.
+
+ # run the following as root
+ mkfs.ext4 -L rootfs /dev/sdx2
+ mkdir -p /media/rootfs
+ mount /dev/sdx2 /media/rootfs
+
+You will need to extract *output/images/rootfs.tar* onto the partition, as **root**.
+
+ # run the following as root
+ tar -xvpsf output/images/rootfs.tar -C /media/rootfs # replace with your mount directory
+ umount /media/rootfs
+
View
1,024 board/raspberrypi/busybox.config
@@ -0,0 +1,1024 @@
+#
+# Automatically generated make config: don't edit
+# Busybox version: 1.20.2
+# Fri Jan 4 00:35:59 2013
+#
+CONFIG_HAVE_DOT_CONFIG=y
+
+#
+# Busybox Settings
+#
+
+#
+# General Configuration
+#
+# CONFIG_DESKTOP is not set
+# CONFIG_EXTRA_COMPAT is not set
+CONFIG_INCLUDE_SUSv2=y
+# CONFIG_USE_PORTABLE_CODE is not set
+CONFIG_PLATFORM_LINUX=y
+CONFIG_FEATURE_BUFFERS_USE_MALLOC=y
+# CONFIG_FEATURE_BUFFERS_GO_ON_STACK is not set
+# CONFIG_FEATURE_BUFFERS_GO_IN_BSS is not set
+CONFIG_SHOW_USAGE=y
+CONFIG_FEATURE_VERBOSE_USAGE=y
+# CONFIG_FEATURE_COMPRESS_USAGE is not set
+CONFIG_FEATURE_INSTALLER=y
+# CONFIG_INSTALL_NO_USR is not set
+# CONFIG_LOCALE_SUPPORT is not set
+# CONFIG_UNICODE_SUPPORT is not set
+# CONFIG_UNICODE_USING_LOCALE is not set
+# CONFIG_FEATURE_CHECK_UNICODE_IN_ENV is not set
+CONFIG_SUBST_WCHAR=0
+CONFIG_LAST_SUPPORTED_WCHAR=0
+# CONFIG_UNICODE_COMBINING_WCHARS is not set
+# CONFIG_UNICODE_WIDE_WCHARS is not set
+# CONFIG_UNICODE_BIDI_SUPPORT is not set
+# CONFIG_UNICODE_NEUTRAL_TABLE is not set
+# CONFIG_UNICODE_PRESERVE_BROKEN is not set
+CONFIG_LONG_OPTS=y
+CONFIG_FEATURE_DEVPTS=y
+CONFIG_FEATURE_CLEAN_UP=y
+CONFIG_FEATURE_UTMP=y
+CONFIG_FEATURE_WTMP=y
+# CONFIG_FEATURE_PIDFILE is not set
+CONFIG_FEATURE_SUID=y
+# CONFIG_FEATURE_SUID_CONFIG is not set
+# CONFIG_FEATURE_SUID_CONFIG_QUIET is not set
+# CONFIG_SELINUX is not set
+# CONFIG_FEATURE_PREFER_APPLETS is not set
+CONFIG_BUSYBOX_EXEC_PATH="/proc/self/exe"
+CONFIG_FEATURE_SYSLOG=y
+# CONFIG_FEATURE_HAVE_RPC is not set
+
+#
+# Build Options
+#
+# CONFIG_STATIC is not set
+# CONFIG_PIE is not set
+# CONFIG_NOMMU is not set
+# CONFIG_BUILD_LIBBUSYBOX is not set
+# CONFIG_FEATURE_INDIVIDUAL is not set
+# CONFIG_FEATURE_SHARED_BUSYBOX is not set
+CONFIG_LFS=y
+CONFIG_CROSS_COMPILER_PREFIX=""
+CONFIG_SYSROOT=""
+CONFIG_EXTRA_CFLAGS=""
+CONFIG_EXTRA_LDFLAGS=""
+CONFIG_EXTRA_LDLIBS=""
+
+#
+# Debugging Options
+#
+# CONFIG_DEBUG is not set
+# CONFIG_DEBUG_PESSIMIZE is not set
+# CONFIG_WERROR is not set
+CONFIG_NO_DEBUG_LIB=y
+# CONFIG_DMALLOC is not set
+# CONFIG_EFENCE is not set
+
+#
+# Installation Options ("make install" behavior)
+#
+CONFIG_INSTALL_APPLET_SYMLINKS=y
+# CONFIG_INSTALL_APPLET_HARDLINKS is not set
+# CONFIG_INSTALL_APPLET_SCRIPT_WRAPPERS is not set
+# CONFIG_INSTALL_APPLET_DONT is not set
+# CONFIG_INSTALL_SH_APPLET_SYMLINK is not set
+# CONFIG_INSTALL_SH_APPLET_HARDLINK is not set
+# CONFIG_INSTALL_SH_APPLET_SCRIPT_WRAPPER is not set
+CONFIG_PREFIX="./_install"
+
+#
+# Busybox Library Tuning
+#
+# CONFIG_FEATURE_SYSTEMD is not set
+CONFIG_FEATURE_RTMINMAX=y
+CONFIG_PASSWORD_MINLEN=6
+CONFIG_MD5_SMALL=1
+# CONFIG_FEATURE_FAST_TOP is not set
+# CONFIG_FEATURE_ETC_NETWORKS is not set
+CONFIG_FEATURE_USE_TERMIOS=y
+CONFIG_FEATURE_EDITING=y
+CONFIG_FEATURE_EDITING_MAX_LEN=1024
+CONFIG_FEATURE_EDITING_VI=y
+CONFIG_FEATURE_EDITING_HISTORY=999
+CONFIG_FEATURE_EDITING_SAVEHISTORY=y
+# CONFIG_FEATURE_EDITING_SAVE_ON_EXIT is not set
+CONFIG_FEATURE_REVERSE_SEARCH=y
+CONFIG_FEATURE_TAB_COMPLETION=y
+# CONFIG_FEATURE_USERNAME_COMPLETION is not set
+CONFIG_FEATURE_EDITING_FANCY_PROMPT=y
+# CONFIG_FEATURE_EDITING_ASK_TERMINAL is not set
+CONFIG_FEATURE_NON_POSIX_CP=y
+# CONFIG_FEATURE_VERBOSE_CP_MESSAGE is not set
+CONFIG_FEATURE_COPYBUF_KB=4
+CONFIG_FEATURE_SKIP_ROOTFS=y
+CONFIG_MONOTONIC_SYSCALL=y
+CONFIG_IOCTL_HEX2STR_ERROR=y
+CONFIG_FEATURE_HWIB=y
+
+#
+# Applets
+#
+
+#
+# Archival Utilities
+#
+# CONFIG_FEATURE_SEAMLESS_XZ is not set
+# CONFIG_FEATURE_SEAMLESS_LZMA is not set
+# CONFIG_FEATURE_SEAMLESS_BZ2 is not set
+# CONFIG_FEATURE_SEAMLESS_GZ is not set
+# CONFIG_FEATURE_SEAMLESS_Z is not set
+CONFIG_AR=y
+# CONFIG_FEATURE_AR_LONG_FILENAMES is not set
+CONFIG_FEATURE_AR_CREATE=y
+CONFIG_BUNZIP2=y
+# CONFIG_BZIP2 is not set
+CONFIG_CPIO=y
+# CONFIG_FEATURE_CPIO_O is not set
+# CONFIG_FEATURE_CPIO_P is not set
+# CONFIG_DPKG is not set
+# CONFIG_DPKG_DEB is not set
+# CONFIG_FEATURE_DPKG_DEB_EXTRACT_ONLY is not set
+CONFIG_GUNZIP=y
+CONFIG_GZIP=y
+# CONFIG_FEATURE_GZIP_LONG_OPTIONS is not set
+CONFIG_GZIP_FAST=0
+# CONFIG_LZOP is not set
+# CONFIG_LZOP_COMPR_HIGH is not set
+# CONFIG_RPM2CPIO is not set
+# CONFIG_RPM is not set
+CONFIG_TAR=y
+CONFIG_FEATURE_TAR_CREATE=y
+# CONFIG_FEATURE_TAR_AUTODETECT is not set
+CONFIG_FEATURE_TAR_FROM=y
+# CONFIG_FEATURE_TAR_OLDGNU_COMPATIBILITY is not set
+# CONFIG_FEATURE_TAR_OLDSUN_COMPATIBILITY is not set
+CONFIG_FEATURE_TAR_GNU_EXTENSIONS=y
+CONFIG_FEATURE_TAR_LONG_OPTIONS=y
+CONFIG_FEATURE_TAR_TO_COMMAND=y
+# CONFIG_FEATURE_TAR_UNAME_GNAME is not set
+# CONFIG_FEATURE_TAR_NOPRESERVE_TIME is not set
+# CONFIG_FEATURE_TAR_SELINUX is not set
+# CONFIG_UNCOMPRESS is not set
+CONFIG_UNLZMA=y
+# CONFIG_FEATURE_LZMA_FAST is not set
+CONFIG_LZMA=y
+CONFIG_UNXZ=y
+CONFIG_XZ=y
+CONFIG_UNZIP=y
+
+#
+# Coreutils
+#
+CONFIG_BASENAME=y
+CONFIG_CAT=y
+CONFIG_DATE=y
+CONFIG_FEATURE_DATE_ISOFMT=y
+# CONFIG_FEATURE_DATE_NANO is not set
+CONFIG_FEATURE_DATE_COMPAT=y
+CONFIG_HOSTID=y
+CONFIG_ID=y
+# CONFIG_GROUPS is not set
+CONFIG_TEST=y
+CONFIG_FEATURE_TEST_64=y
+CONFIG_TOUCH=y
+CONFIG_FEATURE_TOUCH_SUSV3=y
+CONFIG_TR=y
+CONFIG_FEATURE_TR_CLASSES=y
+CONFIG_FEATURE_TR_EQUIV=y
+# CONFIG_BASE64 is not set
+CONFIG_WHO=y
+# CONFIG_USERS is not set
+# CONFIG_CAL is not set
+CONFIG_CATV=y
+CONFIG_CHGRP=y
+CONFIG_CHMOD=y
+CONFIG_CHOWN=y
+# CONFIG_FEATURE_CHOWN_LONG_OPTIONS is not set
+CONFIG_CHROOT=y
+CONFIG_CKSUM=y
+# CONFIG_COMM is not set
+CONFIG_CP=y
+# CONFIG_FEATURE_CP_LONG_OPTIONS is not set
+CONFIG_CUT=y
+CONFIG_DD=y
+CONFIG_FEATURE_DD_SIGNAL_HANDLING=y
+# CONFIG_FEATURE_DD_THIRD_STATUS_LINE is not set
+CONFIG_FEATURE_DD_IBS_OBS=y
+CONFIG_DF=y
+# CONFIG_FEATURE_DF_FANCY is not set
+CONFIG_DIRNAME=y
+CONFIG_DOS2UNIX=y
+CONFIG_UNIX2DOS=y
+CONFIG_DU=y
+CONFIG_FEATURE_DU_DEFAULT_BLOCKSIZE_1K=y
+CONFIG_ECHO=y
+CONFIG_FEATURE_FANCY_ECHO=y
+CONFIG_ENV=y
+# CONFIG_FEATURE_ENV_LONG_OPTIONS is not set
+# CONFIG_EXPAND is not set
+# CONFIG_FEATURE_EXPAND_LONG_OPTIONS is not set
+CONFIG_EXPR=y
+CONFIG_EXPR_MATH_SUPPORT_64=y
+CONFIG_FALSE=y
+CONFIG_FOLD=y
+# CONFIG_FSYNC is not set
+CONFIG_HEAD=y
+CONFIG_FEATURE_FANCY_HEAD=y
+CONFIG_INSTALL=y
+CONFIG_FEATURE_INSTALL_LONG_OPTIONS=y
+CONFIG_LN=y
+CONFIG_LOGNAME=y
+CONFIG_LS=y
+CONFIG_FEATURE_LS_FILETYPES=y
+CONFIG_FEATURE_LS_FOLLOWLINKS=y
+CONFIG_FEATURE_LS_RECURSIVE=y
+CONFIG_FEATURE_LS_SORTFILES=y
+CONFIG_FEATURE_LS_TIMESTAMPS=y
+CONFIG_FEATURE_LS_USERNAME=y
+CONFIG_FEATURE_LS_COLOR=y
+CONFIG_FEATURE_LS_COLOR_IS_DEFAULT=y
+CONFIG_MD5SUM=y
+CONFIG_MKDIR=y
+CONFIG_FEATURE_MKDIR_LONG_OPTIONS=y
+CONFIG_MKFIFO=y
+CONFIG_MKNOD=y
+CONFIG_MV=y
+CONFIG_FEATURE_MV_LONG_OPTIONS=y
+CONFIG_NICE=y
+CONFIG_NOHUP=y
+CONFIG_OD=y
+CONFIG_PRINTENV=y
+CONFIG_PRINTF=y
+CONFIG_PWD=y
+CONFIG_READLINK=y
+CONFIG_FEATURE_READLINK_FOLLOW=y
+CONFIG_REALPATH=y
+CONFIG_RM=y
+CONFIG_RMDIR=y
+# CONFIG_FEATURE_RMDIR_LONG_OPTIONS is not set
+CONFIG_SEQ=y
+CONFIG_SHA1SUM=y
+CONFIG_SHA256SUM=y
+CONFIG_SHA512SUM=y
+CONFIG_SLEEP=y
+# CONFIG_FEATURE_FANCY_SLEEP is not set
+# CONFIG_FEATURE_FLOAT_SLEEP is not set
+CONFIG_SORT=y
+CONFIG_FEATURE_SORT_BIG=y
+# CONFIG_SPLIT is not set
+# CONFIG_FEATURE_SPLIT_FANCY is not set
+# CONFIG_STAT is not set
+# CONFIG_FEATURE_STAT_FORMAT is not set
+CONFIG_STTY=y
+# CONFIG_SUM is not set
+CONFIG_SYNC=y
+# CONFIG_TAC is not set
+CONFIG_TAIL=y
+CONFIG_FEATURE_FANCY_TAIL=y
+CONFIG_TEE=y
+CONFIG_FEATURE_TEE_USE_BLOCK_IO=y
+CONFIG_TRUE=y
+CONFIG_TTY=y
+CONFIG_UNAME=y
+# CONFIG_UNEXPAND is not set
+# CONFIG_FEATURE_UNEXPAND_LONG_OPTIONS is not set
+CONFIG_UNIQ=y
+CONFIG_USLEEP=y
+CONFIG_UUDECODE=y
+CONFIG_UUENCODE=y
+CONFIG_WC=y
+# CONFIG_FEATURE_WC_LARGE is not set
+CONFIG_WHOAMI=y
+CONFIG_YES=y
+
+#
+# Common options for cp and mv
+#
+CONFIG_FEATURE_PRESERVE_HARDLINKS=y
+
+#
+# Common options for ls, more and telnet
+#
+CONFIG_FEATURE_AUTOWIDTH=y
+
+#
+# Common options for df, du, ls
+#
+CONFIG_FEATURE_HUMAN_READABLE=y
+
+#
+# Common options for md5sum, sha1sum, sha256sum, sha512sum
+#
+CONFIG_FEATURE_MD5_SHA1_SUM_CHECK=y
+
+#
+# Console Utilities
+#
+CONFIG_CHVT=y
+# CONFIG_FGCONSOLE is not set
+CONFIG_CLEAR=y
+CONFIG_DEALLOCVT=y
+CONFIG_DUMPKMAP=y
+# CONFIG_KBD_MODE is not set
+CONFIG_LOADFONT=y
+CONFIG_LOADKMAP=y
+CONFIG_OPENVT=y
+CONFIG_RESET=y
+CONFIG_RESIZE=y
+CONFIG_FEATURE_RESIZE_PRINT=y
+CONFIG_SETCONSOLE=y
+# CONFIG_FEATURE_SETCONSOLE_LONG_OPTIONS is not set
+# CONFIG_SETFONT is not set
+# CONFIG_FEATURE_SETFONT_TEXTUAL_MAP is not set
+CONFIG_DEFAULT_SETFONT_DIR=""
+CONFIG_SETKEYCODES=y
+CONFIG_SETLOGCONS=y
+# CONFIG_SHOWKEY is not set
+
+#
+# Common options for loadfont and setfont
+#
+CONFIG_FEATURE_LOADFONT_PSF2=y
+CONFIG_FEATURE_LOADFONT_RAW=y
+
+#
+# Debian Utilities
+#
+CONFIG_MKTEMP=y
+CONFIG_PIPE_PROGRESS=y
+CONFIG_RUN_PARTS=y
+CONFIG_FEATURE_RUN_PARTS_LONG_OPTIONS=y
+# CONFIG_FEATURE_RUN_PARTS_FANCY is not set
+CONFIG_START_STOP_DAEMON=y
+CONFIG_FEATURE_START_STOP_DAEMON_FANCY=y
+CONFIG_FEATURE_START_STOP_DAEMON_LONG_OPTIONS=y
+CONFIG_WHICH=y
+
+#
+# Editors
+#
+CONFIG_PATCH=y
+CONFIG_VI=y
+CONFIG_FEATURE_VI_MAX_LEN=4096
+CONFIG_FEATURE_VI_8BIT=y
+CONFIG_FEATURE_VI_COLON=y
+CONFIG_FEATURE_VI_YANKMARK=y
+CONFIG_FEATURE_VI_SEARCH=y
+# CONFIG_FEATURE_VI_REGEX_SEARCH is not set
+CONFIG_FEATURE_VI_USE_SIGNALS=y
+CONFIG_FEATURE_VI_DOT_CMD=y
+CONFIG_FEATURE_VI_READONLY=y
+CONFIG_FEATURE_VI_SETOPTS=y
+CONFIG_FEATURE_VI_SET=y
+CONFIG_FEATURE_VI_WIN_RESIZE=y
+CONFIG_FEATURE_VI_ASK_TERMINAL=y
+CONFIG_FEATURE_VI_OPTIMIZE_CURSOR=y
+CONFIG_AWK=y
+# CONFIG_FEATURE_AWK_LIBM is not set
+CONFIG_CMP=y
+CONFIG_DIFF=y
+# CONFIG_FEATURE_DIFF_LONG_OPTIONS is not set
+CONFIG_FEATURE_DIFF_DIR=y
+# CONFIG_ED is not set
+CONFIG_SED=y
+CONFIG_FEATURE_ALLOW_EXEC=y
+
+#
+# Finding Utilities
+#
+CONFIG_FIND=y
+CONFIG_FEATURE_FIND_PRINT0=y
+CONFIG_FEATURE_FIND_MTIME=y
+CONFIG_FEATURE_FIND_MMIN=y
+CONFIG_FEATURE_FIND_PERM=y
+CONFIG_FEATURE_FIND_TYPE=y
+CONFIG_FEATURE_FIND_XDEV=y
+CONFIG_FEATURE_FIND_MAXDEPTH=y
+CONFIG_FEATURE_FIND_NEWER=y
+# CONFIG_FEATURE_FIND_INUM is not set
+CONFIG_FEATURE_FIND_EXEC=y
+CONFIG_FEATURE_FIND_USER=y
+CONFIG_FEATURE_FIND_GROUP=y
+CONFIG_FEATURE_FIND_NOT=y
+CONFIG_FEATURE_FIND_DEPTH=y
+CONFIG_FEATURE_FIND_PAREN=y
+CONFIG_FEATURE_FIND_SIZE=y
+CONFIG_FEATURE_FIND_PRUNE=y
+# CONFIG_FEATURE_FIND_DELETE is not set
+CONFIG_FEATURE_FIND_PATH=y
+CONFIG_FEATURE_FIND_REGEX=y
+# CONFIG_FEATURE_FIND_CONTEXT is not set
+# CONFIG_FEATURE_FIND_LINKS is not set
+CONFIG_GREP=y
+CONFIG_FEATURE_GREP_EGREP_ALIAS=y
+CONFIG_FEATURE_GREP_FGREP_ALIAS=y
+CONFIG_FEATURE_GREP_CONTEXT=y
+CONFIG_XARGS=y
+# CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION is not set
+CONFIG_FEATURE_XARGS_SUPPORT_QUOTES=y
+CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT=y
+CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM=y
+
+#
+# Init Utilities
+#
+# CONFIG_BOOTCHARTD is not set
+# CONFIG_FEATURE_BOOTCHARTD_BLOATED_HEADER is not set
+# CONFIG_FEATURE_BOOTCHARTD_CONFIG_FILE is not set
+CONFIG_HALT=y
+# CONFIG_FEATURE_CALL_TELINIT is not set
+CONFIG_TELINIT_PATH=""
+CONFIG_INIT=y
+CONFIG_FEATURE_USE_INITTAB=y
+CONFIG_FEATURE_KILL_REMOVED=y
+CONFIG_FEATURE_KILL_DELAY=0
+CONFIG_FEATURE_INIT_SCTTY=y
+CONFIG_FEATURE_INIT_SYSLOG=y
+CONFIG_FEATURE_EXTRA_QUIET=y
+# CONFIG_FEATURE_INIT_COREDUMPS is not set
+CONFIG_FEATURE_INITRD=y
+CONFIG_INIT_TERMINAL_TYPE="linux"
+CONFIG_MESG=y
+CONFIG_FEATURE_MESG_ENABLE_ONLY_GROUP=y
+
+#
+# Login/Password Management Utilities
+#
+# CONFIG_ADD_SHELL is not set
+# CONFIG_REMOVE_SHELL is not set
+CONFIG_FEATURE_SHADOWPASSWDS=y
+# CONFIG_USE_BB_PWD_GRP is not set
+# CONFIG_USE_BB_SHADOW is not set
+CONFIG_USE_BB_CRYPT=y
+# CONFIG_USE_BB_CRYPT_SHA is not set
+CONFIG_ADDUSER=y
+# CONFIG_FEATURE_ADDUSER_LONG_OPTIONS is not set
+# CONFIG_FEATURE_CHECK_NAMES is not set
+CONFIG_FIRST_SYSTEM_ID=100
+CONFIG_LAST_SYSTEM_ID=999
+CONFIG_ADDGROUP=y
+# CONFIG_FEATURE_ADDGROUP_LONG_OPTIONS is not set
+# CONFIG_FEATURE_ADDUSER_TO_GROUP is not set
+CONFIG_DELUSER=y
+CONFIG_DELGROUP=y
+# CONFIG_FEATURE_DEL_USER_FROM_GROUP is not set
+CONFIG_GETTY=y
+CONFIG_LOGIN=y
+# CONFIG_LOGIN_SESSION_AS_CHILD is not set
+# CONFIG_PAM is not set
+# CONFIG_LOGIN_SCRIPTS is not set
+CONFIG_FEATURE_NOLOGIN=y
+CONFIG_FEATURE_SECURETTY=y
+CONFIG_PASSWD=y
+CONFIG_FEATURE_PASSWD_WEAK_CHECK=y
+# CONFIG_CRYPTPW is not set
+# CONFIG_CHPASSWD is not set
+CONFIG_FEATURE_DEFAULT_PASSWD_ALGO="des"
+CONFIG_SU=y
+CONFIG_FEATURE_SU_SYSLOG=y
+CONFIG_FEATURE_SU_CHECKS_SHELLS=y
+CONFIG_SULOGIN=y
+CONFIG_VLOCK=y
+
+#
+# Linux Ext2 FS Progs
+#
+CONFIG_CHATTR=y
+CONFIG_FSCK=y
+CONFIG_LSATTR=y
+# CONFIG_TUNE2FS is not set
+
+#
+# Linux Module Utilities
+#
+# CONFIG_MODINFO is not set
+# CONFIG_MODPROBE_SMALL is not set
+# CONFIG_FEATURE_MODPROBE_SMALL_OPTIONS_ON_CMDLINE is not set
+# CONFIG_FEATURE_MODPROBE_SMALL_CHECK_ALREADY_LOADED is not set
+CONFIG_INSMOD=y
+CONFIG_RMMOD=y
+CONFIG_LSMOD=y
+CONFIG_FEATURE_LSMOD_PRETTY_2_6_OUTPUT=y
+CONFIG_MODPROBE=y
+# CONFIG_FEATURE_MODPROBE_BLACKLIST is not set
+CONFIG_DEPMOD=y
+
+#
+# Options common to multiple modutils
+#
+# CONFIG_FEATURE_2_4_MODULES is not set
+# CONFIG_FEATURE_INSMOD_TRY_MMAP is not set
+# CONFIG_FEATURE_INSMOD_VERSION_CHECKING is not set
+# CONFIG_FEATURE_INSMOD_KSYMOOPS_SYMBOLS is not set
+# CONFIG_FEATURE_INSMOD_LOADINKMEM is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP is not set
+# CONFIG_FEATURE_INSMOD_LOAD_MAP_FULL is not set
+CONFIG_FEATURE_CHECK_TAINTED_MODULE=y
+CONFIG_FEATURE_MODUTILS_ALIAS=y
+CONFIG_FEATURE_MODUTILS_SYMBOLS=y
+CONFIG_DEFAULT_MODULES_DIR="/lib/modules"
+CONFIG_DEFAULT_DEPMOD_FILE="modules.dep"
+
+#
+# Linux System Utilities
+#
+# CONFIG_BLOCKDEV is not set
+CONFIG_MDEV=y
+CONFIG_FEATURE_MDEV_CONF=y
+CONFIG_FEATURE_MDEV_RENAME=y
+# CONFIG_FEATURE_MDEV_RENAME_REGEXP is not set
+CONFIG_FEATURE_MDEV_EXEC=y
+# CONFIG_FEATURE_MDEV_LOAD_FIRMWARE is not set
+# CONFIG_REV is not set
+# CONFIG_ACPID is not set
+# CONFIG_FEATURE_ACPID_COMPAT is not set
+CONFIG_BLKID=y
+# CONFIG_FEATURE_BLKID_TYPE is not set
+CONFIG_DMESG=y
+CONFIG_FEATURE_DMESG_PRETTY=y
+# CONFIG_FBSET is not set
+# CONFIG_FEATURE_FBSET_FANCY is not set
+# CONFIG_FEATURE_FBSET_READMODE is not set
+CONFIG_FDFLUSH=y
+CONFIG_FDFORMAT=y
+# CONFIG_FDISK is not set
+# CONFIG_FDISK_SUPPORT_LARGE_DISKS is not set
+# CONFIG_FEATURE_FDISK_WRITABLE is not set
+# CONFIG_FEATURE_AIX_LABEL is not set
+# CONFIG_FEATURE_SGI_LABEL is not set
+# CONFIG_FEATURE_SUN_LABEL is not set
+# CONFIG_FEATURE_OSF_LABEL is not set
+# CONFIG_FEATURE_GPT_LABEL is not set
+# CONFIG_FEATURE_FDISK_ADVANCED is not set
+# CONFIG_FINDFS is not set
+# CONFIG_FLOCK is not set
+CONFIG_FREERAMDISK=y
+# CONFIG_FSCK_MINIX is not set
+# CONFIG_MKFS_EXT2 is not set
+# CONFIG_MKFS_MINIX is not set
+# CONFIG_FEATURE_MINIX2 is not set
+# CONFIG_MKFS_REISER is not set
+# CONFIG_MKFS_VFAT is not set
+CONFIG_GETOPT=y
+CONFIG_FEATURE_GETOPT_LONG=y
+CONFIG_HEXDUMP=y
+# CONFIG_FEATURE_HEXDUMP_REVERSE is not set
+# CONFIG_HD is not set
+CONFIG_HWCLOCK=y
+CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS=y
+CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS=y
+CONFIG_IPCRM=y
+CONFIG_IPCS=y
+CONFIG_LOSETUP=y
+CONFIG_LSPCI=y
+CONFIG_LSUSB=y
+CONFIG_MKSWAP=y
+# CONFIG_FEATURE_MKSWAP_UUID is not set
+CONFIG_MORE=y
+CONFIG_MOUNT=y
+# CONFIG_FEATURE_MOUNT_FAKE is not set
+# CONFIG_FEATURE_MOUNT_VERBOSE is not set
+# CONFIG_FEATURE_MOUNT_HELPERS is not set
+# CONFIG_FEATURE_MOUNT_LABEL is not set
+# CONFIG_FEATURE_MOUNT_NFS is not set
+CONFIG_FEATURE_MOUNT_CIFS=y
+CONFIG_FEATURE_MOUNT_FLAGS=y
+CONFIG_FEATURE_MOUNT_FSTAB=y
+CONFIG_PIVOT_ROOT=y
+CONFIG_RDATE=y
+# CONFIG_RDEV is not set
+CONFIG_READPROFILE=y
+# CONFIG_RTCWAKE is not set
+# CONFIG_SCRIPT is not set
+# CONFIG_SCRIPTREPLAY is not set
+CONFIG_SETARCH=y
+CONFIG_SWAPONOFF=y
+# CONFIG_FEATURE_SWAPON_PRI is not set
+CONFIG_SWITCH_ROOT=y
+CONFIG_UMOUNT=y
+CONFIG_FEATURE_UMOUNT_ALL=y
+
+#
+# Common options for mount/umount
+#
+CONFIG_FEATURE_MOUNT_LOOP=y
+CONFIG_FEATURE_MOUNT_LOOP_CREATE=y
+# CONFIG_FEATURE_MTAB_SUPPORT is not set
+CONFIG_VOLUMEID=y
+
+#
+# Filesystem/Volume identification
+#
+CONFIG_FEATURE_VOLUMEID_EXT=y
+# CONFIG_FEATURE_VOLUMEID_BTRFS is not set
+# CONFIG_FEATURE_VOLUMEID_REISERFS is not set
+CONFIG_FEATURE_VOLUMEID_FAT=y
+# CONFIG_FEATURE_VOLUMEID_HFS is not set
+# CONFIG_FEATURE_VOLUMEID_JFS is not set
+# CONFIG_FEATURE_VOLUMEID_XFS is not set
+# CONFIG_FEATURE_VOLUMEID_NTFS is not set
+# CONFIG_FEATURE_VOLUMEID_ISO9660 is not set
+# CONFIG_FEATURE_VOLUMEID_UDF is not set
+# CONFIG_FEATURE_VOLUMEID_LUKS is not set
+# CONFIG_FEATURE_VOLUMEID_LINUXSWAP is not set
+# CONFIG_FEATURE_VOLUMEID_CRAMFS is not set
+# CONFIG_FEATURE_VOLUMEID_ROMFS is not set
+# CONFIG_FEATURE_VOLUMEID_SYSV is not set
+# CONFIG_FEATURE_VOLUMEID_OCFS2 is not set
+# CONFIG_FEATURE_VOLUMEID_LINUXRAID is not set
+
+#
+# Miscellaneous Utilities
+#
+# CONFIG_CONSPY is not set
+CONFIG_LESS=y
+CONFIG_FEATURE_LESS_MAXLINES=9999999
+CONFIG_FEATURE_LESS_BRACKETS=y
+CONFIG_FEATURE_LESS_FLAGS=y
+# CONFIG_FEATURE_LESS_MARKS is not set
+CONFIG_FEATURE_LESS_REGEXP=y
+# CONFIG_FEATURE_LESS_WINCH is not set
+# CONFIG_FEATURE_LESS_ASK_TERMINAL is not set
+# CONFIG_FEATURE_LESS_DASHCMD is not set
+# CONFIG_FEATURE_LESS_LINENUMS is not set
+# CONFIG_NANDWRITE is not set
+# CONFIG_NANDDUMP is not set
+CONFIG_SETSERIAL=y
+# CONFIG_UBIATTACH is not set
+# CONFIG_UBIDETACH is not set
+# CONFIG_UBIMKVOL is not set
+# CONFIG_UBIRMVOL is not set
+# CONFIG_UBIRSVOL is not set
+# CONFIG_UBIUPDATEVOL is not set
+# CONFIG_ADJTIMEX is not set
+# CONFIG_BBCONFIG is not set
+# CONFIG_FEATURE_COMPRESS_BBCONFIG is not set
+# CONFIG_BEEP is not set
+CONFIG_FEATURE_BEEP_FREQ=0
+CONFIG_FEATURE_BEEP_LENGTH_MS=0
+# CONFIG_CHAT is not set
+# CONFIG_FEATURE_CHAT_NOFAIL is not set
+# CONFIG_FEATURE_CHAT_TTY_HIFI is not set
+# CONFIG_FEATURE_CHAT_IMPLICIT_CR is not set
+# CONFIG_FEATURE_CHAT_SWALLOW_OPTS is not set
+# CONFIG_FEATURE_CHAT_SEND_ESCAPES is not set
+# CONFIG_FEATURE_CHAT_VAR_ABORT_LEN is not set
+# CONFIG_FEATURE_CHAT_CLR_ABORT is not set
+CONFIG_CHRT=y
+CONFIG_CROND=y
+# CONFIG_FEATURE_CROND_D is not set
+# CONFIG_FEATURE_CROND_CALL_SENDMAIL is not set
+CONFIG_FEATURE_CROND_DIR="/var/spool/cron"
+CONFIG_CRONTAB=y
+CONFIG_DC=y
+# CONFIG_FEATURE_DC_LIBM is not set
+# CONFIG_DEVFSD is not set
+# CONFIG_DEVFSD_MODLOAD is not set
+# CONFIG_DEVFSD_FG_NP is not set
+# CONFIG_DEVFSD_VERBOSE is not set
+# CONFIG_FEATURE_DEVFS is not set
+CONFIG_DEVMEM=y
+CONFIG_EJECT=y
+# CONFIG_FEATURE_EJECT_SCSI is not set
+# CONFIG_FBSPLASH is not set
+# CONFIG_FLASHCP is not set
+# CONFIG_FLASH_LOCK is not set
+# CONFIG_FLASH_UNLOCK is not set
+# CONFIG_FLASH_ERASEALL is not set
+# CONFIG_IONICE is not set
+# CONFIG_INOTIFYD is not set
+CONFIG_LAST=y
+CONFIG_FEATURE_LAST_SMALL=y
+# CONFIG_FEATURE_LAST_FANCY is not set
+CONFIG_HDPARM=y
+CONFIG_FEATURE_HDPARM_GET_IDENTITY=y
+# CONFIG_FEATURE_HDPARM_HDIO_SCAN_HWIF is not set
+# CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF is not set
+# CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET is not set
+# CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF is not set
+# CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA is not set
+CONFIG_MAKEDEVS=y
+# CONFIG_FEATURE_MAKEDEVS_LEAF is not set
+CONFIG_FEATURE_MAKEDEVS_TABLE=y
+# CONFIG_MAN is not set
+CONFIG_MICROCOM=y
+CONFIG_MOUNTPOINT=y
+CONFIG_MT=y
+# CONFIG_RAIDAUTORUN is not set
+# CONFIG_READAHEAD is not set
+# CONFIG_RFKILL is not set
+CONFIG_RUNLEVEL=y
+CONFIG_RX=y
+CONFIG_SETSID=y
+CONFIG_STRINGS=y
+# CONFIG_TASKSET is not set
+# CONFIG_FEATURE_TASKSET_FANCY is not set
+CONFIG_TIME=y
+# CONFIG_TIMEOUT is not set
+# CONFIG_TTYSIZE is not set
+# CONFIG_VOLNAME is not set
+# CONFIG_WALL is not set
+CONFIG_WATCHDOG=y
+
+#
+# Networking Utilities
+#
+CONFIG_NAMEIF=y
+# CONFIG_FEATURE_NAMEIF_EXTENDED is not set
+# CONFIG_NBDCLIENT is not set
+# CONFIG_NC is not set
+# CONFIG_NC_SERVER is not set
+# CONFIG_NC_EXTRA is not set
+# CONFIG_NC_110_COMPAT is not set
+CONFIG_PING=y
+# CONFIG_PING6 is not set
+CONFIG_FEATURE_FANCY_PING=y
+# CONFIG_WHOIS is not set
+# CONFIG_FEATURE_IPV6 is not set
+# CONFIG_FEATURE_UNIX_LOCAL is not set
+# CONFIG_FEATURE_PREFER_IPV4_ADDRESS is not set
+# CONFIG_VERBOSE_RESOLUTION_ERRORS is not set
+# CONFIG_ARP is not set
+CONFIG_ARPING=y
+# CONFIG_BRCTL is not set
+# CONFIG_FEATURE_BRCTL_FANCY is not set
+# CONFIG_FEATURE_BRCTL_SHOW is not set
+CONFIG_DNSD=y
+CONFIG_ETHER_WAKE=y
+# CONFIG_FAKEIDENTD is not set
+# CONFIG_FTPD is not set
+# CONFIG_FEATURE_FTP_WRITE is not set
+# CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST is not set
+# CONFIG_FTPGET is not set
+# CONFIG_FTPPUT is not set
+# CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS is not set
+CONFIG_HOSTNAME=y
+# CONFIG_HTTPD is not set
+# CONFIG_FEATURE_HTTPD_RANGES is not set
+# CONFIG_FEATURE_HTTPD_USE_SENDFILE is not set
+# CONFIG_FEATURE_HTTPD_SETUID is not set
+# CONFIG_FEATURE_HTTPD_BASIC_AUTH is not set
+# CONFIG_FEATURE_HTTPD_AUTH_MD5 is not set
+# CONFIG_FEATURE_HTTPD_CGI is not set
+# CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR is not set
+# CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV is not set
+# CONFIG_FEATURE_HTTPD_ENCODE_URL_STR is not set
+# CONFIG_FEATURE_HTTPD_ERROR_PAGES is not set
+# CONFIG_FEATURE_HTTPD_PROXY is not set
+# CONFIG_FEATURE_HTTPD_GZIP is not set
+CONFIG_IFCONFIG=y
+CONFIG_FEATURE_IFCONFIG_STATUS=y
+CONFIG_FEATURE_IFCONFIG_SLIP=y
+CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ=y
+CONFIG_FEATURE_IFCONFIG_HW=y
+# CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS is not set
+# CONFIG_IFENSLAVE is not set
+# CONFIG_IFPLUGD is not set
+CONFIG_IFUPDOWN=y
+CONFIG_IFUPDOWN_IFSTATE_PATH="/var/run/ifstate"
+CONFIG_FEATURE_IFUPDOWN_IP=y
+# CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN is not set
+# CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN is not set
+CONFIG_FEATURE_IFUPDOWN_IPV4=y
+# CONFIG_FEATURE_IFUPDOWN_IPV6 is not set
+CONFIG_FEATURE_IFUPDOWN_MAPPING=y
+# CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP is not set
+CONFIG_INETD=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME=y
+CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN=y
+# CONFIG_FEATURE_INETD_RPC is not set
+CONFIG_IP=y
+CONFIG_FEATURE_IP_ADDRESS=y
+CONFIG_FEATURE_IP_LINK=y
+CONFIG_FEATURE_IP_ROUTE=y
+CONFIG_FEATURE_IP_TUNNEL=y
+CONFIG_FEATURE_IP_RULE=y
+CONFIG_FEATURE_IP_SHORT_FORMS=y
+# CONFIG_FEATURE_IP_RARE_PROTOCOLS is not set
+CONFIG_IPADDR=y
+CONFIG_IPLINK=y
+CONFIG_IPROUTE=y
+CONFIG_IPTUNNEL=y
+CONFIG_IPRULE=y
+# CONFIG_IPCALC is not set
+# CONFIG_FEATURE_IPCALC_FANCY is not set
+# CONFIG_FEATURE_IPCALC_LONG_OPTIONS is not set
+CONFIG_NETSTAT=y
+# CONFIG_FEATURE_NETSTAT_WIDE is not set
+# CONFIG_FEATURE_NETSTAT_PRG is not set
+CONFIG_NSLOOKUP=y
+# CONFIG_NTPD is not set
+# CONFIG_FEATURE_NTPD_SERVER is not set
+# CONFIG_PSCAN is not set
+CONFIG_ROUTE=y
+# CONFIG_SLATTACH is not set
+# CONFIG_TCPSVD is not set
+CONFIG_TELNET=y
+CONFIG_FEATURE_TELNET_TTYPE=y
+CONFIG_FEATURE_TELNET_AUTOLOGIN=y
+# CONFIG_TELNETD is not set
+# CONFIG_FEATURE_TELNETD_STANDALONE is not set
+# CONFIG_FEATURE_TELNETD_INETD_WAIT is not set
+CONFIG_TFTP=y
+# CONFIG_TFTPD is not set
+
+#
+# Common options for tftp/tftpd
+#
+CONFIG_FEATURE_TFTP_GET=y
+CONFIG_FEATURE_TFTP_PUT=y
+CONFIG_FEATURE_TFTP_BLOCKSIZE=y
+# CONFIG_FEATURE_TFTP_PROGRESS_BAR is not set
+# CONFIG_TFTP_DEBUG is not set
+CONFIG_TRACEROUTE=y
+# CONFIG_TRACEROUTE6 is not set
+# CONFIG_FEATURE_TRACEROUTE_VERBOSE is not set
+# CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE is not set
+# CONFIG_FEATURE_TRACEROUTE_USE_ICMP is not set
+# CONFIG_TUNCTL is not set
+# CONFIG_FEATURE_TUNCTL_UG is not set
+# CONFIG_UDHCPC6 is not set
+# CONFIG_UDHCPD is not set
+# CONFIG_DHCPRELAY is not set
+# CONFIG_DUMPLEASES is not set
+# CONFIG_FEATURE_UDHCPD_WRITE_LEASES_EARLY is not set
+# CONFIG_FEATURE_UDHCPD_BASE_IP_ON_MAC is not set
+CONFIG_DHCPD_LEASES_FILE=""
+CONFIG_UDHCPC=y
+CONFIG_FEATURE_UDHCPC_ARPING=y
+# CONFIG_FEATURE_UDHCP_PORT is not set
+CONFIG_UDHCP_DEBUG=0
+# CONFIG_FEATURE_UDHCP_RFC3397 is not set
+CONFIG_FEATURE_UDHCP_8021Q=y
+CONFIG_UDHCPC_DEFAULT_SCRIPT="/usr/share/udhcpc/default.script"
+CONFIG_UDHCPC_SLACK_FOR_BUGGY_SERVERS=80
+CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS="-R -n"
+# CONFIG_UDPSVD is not set
+CONFIG_VCONFIG=y
+CONFIG_WGET=y
+CONFIG_FEATURE_WGET_STATUSBAR=y
+CONFIG_FEATURE_WGET_AUTHENTICATION=y
+CONFIG_FEATURE_WGET_LONG_OPTIONS=y
+CONFIG_FEATURE_WGET_TIMEOUT=y
+# CONFIG_ZCIP is not set
+
+#
+# Print Utilities
+#
+# CONFIG_LPD is not set
+# CONFIG_LPR is not set
+# CONFIG_LPQ is not set
+
+#
+# Mail Utilities
+#
+# CONFIG_MAKEMIME is not set
+CONFIG_FEATURE_MIME_CHARSET=""
+# CONFIG_POPMAILDIR is not set
+# CONFIG_FEATURE_POPMAILDIR_DELIVERY is not set
+# CONFIG_REFORMIME is not set
+# CONFIG_FEATURE_REFORMIME_COMPAT is not set
+# CONFIG_SENDMAIL is not set
+
+#
+# Process Utilities
+#
+# CONFIG_IOSTAT is not set
+CONFIG_LSOF=y
+# CONFIG_MPSTAT is not set
+# CONFIG_NMETER is not set
+# CONFIG_PMAP is not set
+# CONFIG_POWERTOP is not set
+# CONFIG_PSTREE is not set
+# CONFIG_PWDX is not set
+# CONFIG_SMEMCAP is not set
+CONFIG_UPTIME=y
+# CONFIG_FEATURE_UPTIME_UTMP_SUPPORT is not set
+CONFIG_FREE=y
+CONFIG_FUSER=y
+CONFIG_KILL=y
+CONFIG_KILLALL=y
+CONFIG_KILLALL5=y
+# CONFIG_PGREP is not set
+CONFIG_PIDOF=y
+CONFIG_FEATURE_PIDOF_SINGLE=y
+CONFIG_FEATURE_PIDOF_OMIT=y
+# CONFIG_PKILL is not set
+CONFIG_PS=y
+CONFIG_FEATURE_PS_WIDE=y
+CONFIG_FEATURE_PS_LONG=y
+# CONFIG_FEATURE_PS_TIME is not set
+# CONFIG_FEATURE_PS_ADDITIONAL_COLUMNS is not set
+# CONFIG_FEATURE_PS_UNUSUAL_SYSTEMS is not set
+CONFIG_RENICE=y
+CONFIG_BB_SYSCTL=y
+CONFIG_TOP=y
+CONFIG_FEATURE_TOP_CPU_USAGE_PERCENTAGE=y
+CONFIG_FEATURE_TOP_CPU_GLOBAL_PERCENTS=y
+# CONFIG_FEATURE_TOP_SMP_CPU is not set
+# CONFIG_FEATURE_TOP_DECIMALS is not set
+# CONFIG_FEATURE_TOP_SMP_PROCESS is not set
+# CONFIG_FEATURE_TOPMEM is not set
+# CONFIG_FEATURE_SHOW_THREADS is not set
+CONFIG_WATCH=y
+
+#
+# Runit Utilities
+#
+# CONFIG_RUNSV is not set
+# CONFIG_RUNSVDIR is not set
+# CONFIG_FEATURE_RUNSVDIR_LOG is not set
+# CONFIG_SV is not set
+CONFIG_SV_DEFAULT_SERVICE_DIR=""
+# CONFIG_SVLOGD is not set
+# CONFIG_CHPST is not set
+# CONFIG_SETUIDGID is not set
+# CONFIG_ENVUIDGID is not set
+# CONFIG_ENVDIR is not set
+# CONFIG_SOFTLIMIT is not set
+# CONFIG_CHCON is not set
+# CONFIG_FEATURE_CHCON_LONG_OPTIONS is not set
+# CONFIG_GETENFORCE is not set
+# CONFIG_GETSEBOOL is not set
+# CONFIG_LOAD_POLICY is not set
+# CONFIG_MATCHPATHCON is not set
+# CONFIG_RESTORECON is not set
+# CONFIG_RUNCON is not set
+# CONFIG_FEATURE_RUNCON_LONG_OPTIONS is not set
+# CONFIG_SELINUXENABLED is not set
+# CONFIG_SETENFORCE is not set
+# CONFIG_SETFILES is not set
+# CONFIG_FEATURE_SETFILES_CHECK_OPTION is not set
+# CONFIG_SETSEBOOL is not set
+# CONFIG_SESTATUS is not set
+
+#
+# Shells
+#
+CONFIG_ASH=y
+CONFIG_ASH_BASH_COMPAT=y
+CONFIG_ASH_IDLE_TIMEOUT=y
+CONFIG_ASH_JOB_CONTROL=y
+CONFIG_ASH_ALIAS=y
+# CONFIG_ASH_GETOPTS is not set
+CONFIG_ASH_BUILTIN_ECHO=y
+CONFIG_ASH_BUILTIN_PRINTF=y
+CONFIG_ASH_BUILTIN_TEST=y
+CONFIG_ASH_CMDCMD=y
+# CONFIG_ASH_MAIL is not set
+CONFIG_ASH_OPTIMIZE_FOR_SIZE=y
+CONFIG_ASH_RANDOM_SUPPORT=y
+CONFIG_ASH_EXPAND_PRMT=y
+# CONFIG_CTTYHACK is not set
+# CONFIG_HUSH is not set
+# CONFIG_HUSH_BASH_COMPAT is not set
+# CONFIG_HUSH_BRACE_EXPANSION is not set
+# CONFIG_HUSH_HELP is not set
+# CONFIG_HUSH_INTERACTIVE is not set
+# CONFIG_HUSH_SAVEHISTORY is not set
+# CONFIG_HUSH_JOB is not set
+# CONFIG_HUSH_TICK is not set
+# CONFIG_HUSH_IF is not set
+# CONFIG_HUSH_LOOPS is not set
+# CONFIG_HUSH_CASE is not set
+# CONFIG_HUSH_FUNCTIONS is not set
+# CONFIG_HUSH_LOCAL is not set
+# CONFIG_HUSH_RANDOM_SUPPORT is not set
+# CONFIG_HUSH_EXPORT_N is not set
+# CONFIG_HUSH_MODE_X is not set
+# CONFIG_MSH is not set
+CONFIG_FEATURE_SH_IS_ASH=y
+# CONFIG_FEATURE_SH_IS_HUSH is not set
+# CONFIG_FEATURE_SH_IS_NONE is not set
+# CONFIG_FEATURE_BASH_IS_ASH is not set
+# CONFIG_FEATURE_BASH_IS_HUSH is not set
+CONFIG_FEATURE_BASH_IS_NONE=y
+CONFIG_SH_MATH_SUPPORT=y
+# CONFIG_SH_MATH_SUPPORT_64 is not set
+CONFIG_FEATURE_SH_EXTRA_QUIET=y
+# CONFIG_FEATURE_SH_STANDALONE is not set
+# CONFIG_FEATURE_SH_NOFORK is not set
+# CONFIG_FEATURE_SH_HISTFILESIZE is not set
+
+#
+# System Logging Utilities
+#
+# CONFIG_SYSLOGD is not set
+# CONFIG_FEATURE_ROTATE_LOGFILE is not set
+# CONFIG_FEATURE_REMOTE_LOG is not set
+# CONFIG_FEATURE_SYSLOGD_DUP is not set
+# CONFIG_FEATURE_SYSLOGD_CFG is not set
+CONFIG_FEATURE_SYSLOGD_READ_BUFFER_SIZE=0
+# CONFIG_FEATURE_IPC_SYSLOG is not set
+CONFIG_FEATURE_IPC_SYSLOG_BUFFER_SIZE=0
+# CONFIG_LOGREAD is not set
+# CONFIG_FEATURE_LOGREAD_REDUCED_LOCKING is not set
+# CONFIG_KLOGD is not set
+# CONFIG_FEATURE_KLOGD_KLOGCTL is not set
+# CONFIG_LOGGER is not set
View
11 board/raspberrypi/postscript.sh
@@ -0,0 +1,11 @@
+#!/bin/sh
+
+TARGET="${1}"
+
+# move kernel
+cp ${TARGET}/../build/linux-*/System.map ${TARGET}/boot/System.map
+cp ${TARGET}/../build/linux-*/System.map ${TARGET}/System.map
+mv ${TARGET}/boot/zImage ${TARGET}/boot/kernel.img 2> /dev/null
+
+exit 0
+
View
0 board/raspberrypi/skeleton/bin/.empty
No changes.
View
356 board/raspberrypi/skeleton/boot/COPYING.linux
@@ -0,0 +1,356 @@
+
+ NOTE! This copyright does *not* cover user programs that use kernel
+ services by normal system calls - this is merely considered normal use
+ of the kernel, and does *not* fall under the heading of "derived work".
+ Also note that the GPL below is copyrighted by the Free Software
+ Foundation, but the instance of code that it refers to (the Linux
+ kernel) is copyrighted by me and others who actually wrote it.
+
+ Also note that the only valid version of the GPL as far as the kernel
+ is concerned is _this_ particular version of the license (ie v2, not
+ v2.2 or v3.x or whatever), unless explicitly otherwise stated.
+
+ Linus Torvalds
+
+----------------------------------------
+
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
View
29 board/raspberrypi/skeleton/boot/LICENCE.broadcom
@@ -0,0 +1,29 @@
+Copyright (c) 2006, Broadcom Corporation.
+All rights reserved.
+
+Redistribution. Redistribution and use in binary form, without
+modification, are permitted provided that the following conditions are
+met:
+
+* This software may only be used for the purposes of developing for,
+ running or using a Raspberry Pi device.
+* Redistributions must reproduce the above copyright notice and the
+ following disclaimer in the documentation and/or other materials
+ provided with the distribution.
+* Neither the name of Broadcom Corporation nor the names of its suppliers
+ may be used to endorse or promote products derived from this software
+ without specific prior written permission.
+
+DISCLAIMER. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING,
+BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGE.
+
View
BIN board/raspberrypi/skeleton/boot/bootcode.bin
Binary file not shown.
View
1 board/raspberrypi/skeleton/boot/cmdline.txt
@@ -0,0 +1 @@
+dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
View
46 board/raspberrypi/skeleton/boot/config.txt
@@ -0,0 +1,46 @@
+# uncomment if you get no picture on HDMI for a default "safe" mode
+#hdmi_safe=1
+
+# uncomment this if your display has a black border of unused pixels visible
+# and your display can output without overscan
+disable_overscan=1
+
+# uncomment the following to adjust overscan. Use positive numbers if console
+# goes off screen, and negative if there is too much border
+overscan_left=16
+overscan_right=16
+overscan_top=16
+overscan_bottom=16
+
+# uncomment to force a console size. By default it will be display's size minus
+# overscan.
+#framebuffer_width=1280
+#framebuffer_height=720
+
+# uncomment if hdmi display is not detected and composite is being output
+#hdmi_force_hotplug=1
+
+# uncomment to force a specific HDMI mode (this will force VGA)
+#hdmi_group=1
+#hdmi_mode=1
+
+# uncomment to force a HDMI mode rather than DVI. This can make audio work in
+# DMT (computer monitor) modes
+#hdmi_drive=2
+
+# uncomment to increase signal to HDMI, if you have interference, blanking, or
+# no display
+config_hdmi_boost=4
+
+# uncomment for composite PAL
+#sdtv_mode=2
+
+# uncomment to overclock the arm. 700 MHz is the default.
+arm_freq=1000
+
+# turbo
+core_freq=500
+sdram_freq=500
+over_voltage=6
+
+# for more options see http://elinux.org/RPi_config.txt
View
BIN board/raspberrypi/skeleton/boot/fixup.dat
Binary file not shown.
View
BIN board/raspberrypi/skeleton/boot/start.elf
Binary file not shown.
View
0 board/raspberrypi/skeleton/dev/input/.empty
No changes.
View
1 board/raspberrypi/skeleton/dev/log
View
0 board/raspberrypi/skeleton/dev/pts/.empty
No changes.
View
10 board/raspberrypi/skeleton/etc/fstab
@@ -0,0 +1,10 @@
+# /etc/fstab: static file system information.
+#
+# <file system> <mount pt> <type> <options> <dump> <pass>
+/dev/root / ext4 rw,noauto 0 1
+/dev/mmcblk0p1 /boot vfat rw,noauto 0 1
+proc /proc proc defaults 0 0
+devpts /dev/pts devpts defaults,gid=5,mode=620 0 0
+tmpfs /dev/shm tmpfs mode=0777 0 0
+tmpfs /tmp tmpfs defaults 0 0
+sysfs /sys sysfs defaults 0 0
View
21 board/raspberrypi/skeleton/etc/group
@@ -0,0 +1,21 @@
+root:x:0:
+daemon:x:1:
+bin:x:2:
+sys:x:3:
+adm:x:4:
+tty:x:5:
+disk:x:6:
+wheel:x:10:root
+audio:x:29:
+www-data:x:33:
+utmp:x:43:
+staff:x:50:
+lock:x:54:
+haldaemon:x:68:
+dbus:x:81:
+netdev:x:82:
+ftp:x:83
+nobody:x:99:
+nogroup:x:99:
+users:x:100:
+default:x:1000:
View
1 board/raspberrypi/skeleton/etc/hostname
@@ -0,0 +1 @@
+rpi
View
3 board/raspberrypi/skeleton/etc/hosts
@@ -0,0 +1,3 @@
+127.0.0.1 localhost.localdomain localhost
+127.0.0.1 rpi
+
View
27 board/raspberrypi/skeleton/etc/init.d/S00raspberrypi.sh
@@ -0,0 +1,27 @@
+#! /bin/sh
+#
+# S00raspberrypi.sh - Raspberry Pi startup script
+#
+
+case "$1" in
+ start|"")
+ echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+
+ modprobe evdev
+ modprobe snd-bcm2835
+ # modprobe bcm2708_wdog
+ # modprobe i2c-bcm2708
+ # modprobe spi-bcm2708
+ ;;
+ stop)
+ # rmmod spi-bcm2708
+ # rmmod i2c-bcm2708
+ # rmmod bcm2708_wdog
+ rmmod snd-bcm2835
+ rmmod evdev
+ ;;
+ *)
+ echo "Usage: S00raspberrypi.sh {start|stop}" >&2
+ exit 1
+ ;;
+esac
View
54 board/raspberrypi/skeleton/etc/init.d/S20urandom
@@ -0,0 +1,54 @@
+#! /bin/sh
+#
+# urandom This script saves the random seed between reboots.
+# It is called from the boot, halt and reboot scripts.
+#
+# Version: @(#)urandom 1.33 22-Jun-1998 miquels@cistron.nl
+#
+
+[ -c /dev/urandom ] || exit 0
+#. /etc/default/rcS
+
+case "$1" in
+ start|"")
+ if [ "$VERBOSE" != no ]
+ then
+ echo -n "Initializing random number generator... "
+ fi
+ # Load and then save 512 bytes,
+ # which is the size of the entropy pool
+ if [ -f /etc/random-seed ]
+ then
+ cat /etc/random-seed >/dev/urandom
+ fi
+ # check for read only file system
+ if ! touch /etc/random-seed 2>/dev/null
+ then
+ echo "read-only file system detected...done"
+ exit
+ fi
+ rm -f /etc/random-seed
+ umask 077
+ dd if=/dev/urandom of=/etc/random-seed count=1 \
+ >/dev/null 2>&1 || echo "urandom start: failed."
+ umask 022
+ [ "$VERBOSE" != no ] && echo "done."
+ ;;
+ stop)
+ if ! touch /etc/random-seed 2>/dev/null
+ then
+ exit
+ fi
+ # Carry a random seed from shut-down to start-up;
+ # see documentation in linux/drivers/char/random.c
+ [ "$VERBOSE" != no ] && echo -n "Saving random seed... "
+ umask 077
+ dd if=/dev/urandom of=/etc/random-seed count=1 \
+ >/dev/null 2>&1 || echo "urandom stop: failed."
+ [ "$VERBOSE" != no ] && echo "done."
+ ;;
+ *)
+ echo "Usage: urandom {start|stop}" >&2
+ exit 1
+ ;;
+esac
View
25 board/raspberrypi/skeleton/etc/init.d/S40network
@@ -0,0 +1,25 @@
+#!/bin/sh
+#
+# Start the network....
+#
+
+case "$1" in
+ start)
+ echo "Starting network..."
+ /sbin/ifup -a
+ ;;
+ stop)
+ echo -n "Stopping network..."
+ /sbin/ifdown -a
+ ;;
+ restart|reload)
+ "$0" stop
+ "$0" start
+ ;;
+ *)
+ echo "Usage: $0 {start|stop|restart}"
+ exit 1
+esac
+
+exit $?
+
View
27 board/raspberrypi/skeleton/etc/init.d/rcK
@@ -0,0 +1,27 @@
+#!/bin/sh
+
+
+# Stop all init scripts in /etc/init.d
+# executing them in reversed numerical order.
+#
+for i in $(ls -r /etc/init.d/S??*) ;do
+
+ # Ignore dangling symlinks (if any).
+ [ ! -f "$i" ] && continue
+
+ case "$i" in
+ *.sh)
+ # Source shell script for speed.
+ (
+ trap - INT QUIT TSTP
+ set stop
+ . $i
+ )
+ ;;
+ *)
+ # No sh extension, so fork subprocess.
+ $i stop
+ ;;
+ esac
+done
+
View
27 board/raspberrypi/skeleton/etc/init.d/rcS
@@ -0,0 +1,27 @@
+#!/bin/sh
+
+
+# Start all init scripts in /etc/init.d
+# executing them in numerical order.
+#
+for i in /etc/init.d/S??* ;do
+
+ # Ignore dangling symlinks (if any).
+ [ ! -f "$i" ] && continue
+
+ case "$i" in
+ *.sh)
+ # Source shell script for speed.
+ (
+ trap - INT QUIT TSTP
+ set start
+ . $i
+ )
+ ;;
+ *)
+ # No sh extension, so fork subprocess.
+ $i start
+ ;;
+ esac
+done
+
View
37 board/raspberrypi/skeleton/etc/inittab
@@ -0,0 +1,37 @@
+# /etc/inittab
+#
+# Copyright (C) 2001 Erik Andersen <andersen@codepoet.org>
+#
+# Note: BusyBox init doesn't support runlevels. The runlevels field is
+# completely ignored by BusyBox init. If you want runlevels, use
+# sysvinit.
+#
+# Format for each entry: <id>:<runlevels>:<action>:<process>
+#
+# id == tty to run on, or empty for /dev/console
+# runlevels == ignored
+# action == one of sysinit, respawn, askfirst, wait, and once
+# process == program to run
+
+# Startup the system
+null::sysinit:/bin/mount -t proc proc /proc
+null::sysinit:/bin/mount -o remount,rw / # REMOUNT_ROOTFS_RW
+null::sysinit:/bin/mkdir -p /dev/pts
+null::sysinit:/bin/mkdir -p /dev/shm
+null::sysinit:/bin/mount -a
+null::sysinit:/bin/hostname -F /etc/hostname
+# now run any rc scripts
+::sysinit:/etc/init.d/rcS
+
+# Put a getty on the serial port
+tty1::respawn:/sbin/getty -L tty1 115200 vt100
+ttyAMA0::respawn:/sbin/getty -L ttyAMA0 115200 vt100
+
+# Stuff to do for the 3-finger salute
+::ctrlaltdel:/sbin/reboot
+
+# Stuff to do before rebooting
+null::shutdown:/etc/init.d/rcK
+null::shutdown:/bin/umount -a -r
+null::shutdown:/sbin/swapoff -a
+
View
44 board/raspberrypi/skeleton/etc/inputrc
@@ -0,0 +1,44 @@
+# /etc/inputrc - global inputrc for libreadline
+# See readline(3readline) and `info readline' for more information.
+
+# Be 8 bit clean.
+set input-meta on
+set output-meta on
+set bell-style visible
+
+# To allow the use of 8bit-characters like the german umlauts, comment out
+# the line below. However this makes the meta key not work as a meta key,
+# which is annoying to those which don't need to type in 8-bit characters.
+
+# set convert-meta off
+
+"\e0d": backward-word
+"\e0c": forward-word
+"\e[h": beginning-of-line
+"\e[f": end-of-line
+"\e[1~": beginning-of-line
+"\e[4~": end-of-line
+#"\e[5~": beginning-of-history
+#"\e[6~": end-of-history
+"\e[3~": delete-char
+"\e[2~": quoted-insert
+
+# Common standard keypad and cursor
+# (codes courtsey Werner Fink, <werner@suse.de>)
+#"\e[1~": history-search-backward
+"\e[2~": yank
+"\e[3~": delete-char
+#"\e[4~": set-mark
+"\e[5~": history-search-backward
+"\e[6~": history-search-forward
+# Normal keypad and cursor of xterm
+"\e[F": end-of-line
+"\e[H": beginning-of-line
+# Application keypad and cursor of xterm
+"\eOA": previous-history
+"\eOC": forward-char
+"\eOB": next-history
+"\eOD": backward-char
+"\eOF": end-of-line
+"\eOH": beginning-of-line
+
View
8 board/raspberrypi/skeleton/etc/issue
@@ -0,0 +1,8 @@
+┌─────────────────────────────────┐
+│▛▀▖ ▌ ▛▀▖▗ │
+│▙▄▘▝▀▖▞▀▘▛▀▖▛▀▖▞▀▖▙▀▖▙▀▖▌ ▌ ▙▄▘▄ │
+│▌▚ ▞▀▌▝▀▖▙▄▘▌ ▌▛▀ ▌ ▌ ▚▄▌ ▌ ▐ │
+│▘ ▘▝▀▘▀▀ ▌ ▀▀ ▝▀▘▘ ▘ ▗▄▘ ▘ ▀▘│
+└─────────────────────────────────┘
+
+Your slice of Raspberry Pi is now ready!
View
2 board/raspberrypi/skeleton/etc/ld.so.conf
@@ -0,0 +1,2 @@
+/lib
+/usr/lib
View
0 board/raspberrypi/skeleton/etc/ld.so.conf.d/.empty
No changes.
View
1 board/raspberrypi/skeleton/etc/mtab
View
0 board/raspberrypi/skeleton/etc/network/if-down.d/.empty
No changes.
View
0 board/raspberrypi/skeleton/etc/network/if-post-down.d/.empty
No changes.
View
0 board/raspberrypi/skeleton/etc/network/if-pre-up.d/.empty
No changes.
View
0 board/raspberrypi/skeleton/etc/network/if-up.d/.empty
No changes.
View
8 board/raspberrypi/skeleton/etc/network/interfaces
@@ -0,0 +1,8 @@
+# Configure Loopback
+auto lo
+iface lo inet loopback
+
+# Configure Ethernet
+auto eth0
+iface eth0 inet dhcp
+
View
16 board/raspberrypi/skeleton/etc/passwd
@@ -0,0 +1,16 @@
+root:x:0:0:root:/root:/bin/sh
+daemon:x:1:1:daemon:/usr/sbin:/bin/sh
+bin:x:2:2:bin:/bin:/bin/sh
+sys:x:3:3:sys:/dev:/bin/sh
+sync:x:4:100:sync:/bin:/bin/sync
+mail:x:8:8:mail:/var/spool/mail:/bin/sh
+proxy:x:13:13:proxy:/bin:/bin/sh
+www-data:x:33:33:www-data:/var/www:/bin/sh
+backup:x:34:34:backup:/var/backups:/bin/sh
+operator:x:37:37:Operator:/var:/bin/sh
+haldaemon:x:68:68:hald:/:/bin/sh
+dbus:x:81:81:dbus:/var/run/dbus:/bin/sh
+ftp:x:83:83:ftp:/home/ftp:/bin/sh
+nobody:x:99:99:nobody:/home:/bin/sh
+sshd:x:103:99:Operator:/var:/bin/sh
+default:x:1000:1000:Default non-root user:/home/default:/bin/sh
View
55 board/raspberrypi/skeleton/etc/profile
@@ -0,0 +1,55 @@
+# ~/.bashrc: executed by bash(1) for non-login interactive shells.
+
+export PATH=\
+/bin:\
+/sbin:\
+/usr/bin:\
+/usr/sbin:\
+/usr/bin/X11:\
+/usr/local/bin
+
+# If running interactively, then:
+if [ "$PS1" ]; then
+
+ if [ "$BASH" ]; then
+ export PS1="[\u@\h \W]\\$ "
+ alias ll='/bin/ls --color=tty -laFh'
+ alias ls='/bin/ls --color=tty -F'
+ export LS_COLORS='no=00:fi=00:di=01;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.png=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:';
+ else
+ if [ "`id -u`" -eq 0 ]; then
+ export PS1='# '
+ else
+ export PS1='$ '
+ fi
+ fi
+
+ export USER=`id -un`
+ export LOGNAME=$USER
+ export HOSTNAME=`/bin/hostname`
+ export HISTSIZE=1000
+ export HISTFILESIZE=1000
+ export PAGER='/bin/more '
+ export EDITOR='/bin/vi'
+ export INPUTRC=/etc/inputrc
+ export DMALLOC_OPTIONS=debug=0x34f47d83,inter=100,log=logfile
+
+ ### Some aliases
+ alias ps2='ps facux '
+ alias ps1='ps faxo "%U %t %p %a" '
+ alias af='ps af'
+ alias cls='clear'
+ alias df='df -h'
+ alias indent='indent -bad -bap -bbo -nbc -br -brs -c33 -cd33 -ncdb -ce -ci4 -cli0 -cp33 -cs -d0 -di1 -nfc1 -nfca -hnl -i4 -ip0 -l75 -lp -npcs -npsl -nsc -nsob -nss -ts4 '
+ #alias bc='bc -l'
+ alias minicom='minicom -c on'
+ alias calc='calc -Cd '
+ alias bc='calc -Cd '
+fi;
+
+# Source configuration files from /etc/profile.d
+for i in /etc/profile.d/*.sh ; do
+ if [ -r "$i" ]; then
+ . $i
+ fi
+done
View
31 board/raspberrypi/skeleton/etc/protocols
@@ -0,0 +1,31 @@
+# /etc/protocols:
+# $Id: protocols,v 1.1 2004/10/09 02:49:18 andersen Exp $
+#
+# Internet (IP) protocols
+#
+# from: @(#)protocols 5.1 (Berkeley) 4/17/89
+#
+# Updated for NetBSD based on RFC 1340, Assigned Numbers (July 1992).
+
+ip 0 IP # internet protocol, pseudo protocol number
+icmp 1 ICMP # internet control message protocol
+igmp 2 IGMP # Internet Group Management
+ggp 3 GGP # gateway-gateway protocol
+ipencap 4 IP-ENCAP # IP encapsulated in IP (officially ``IP'')
+st 5 ST # ST datagram mode
+tcp 6 TCP # transmission control protocol
+egp 8 EGP # exterior gateway protocol
+pup 12 PUP # PARC universal packet protocol
+udp 17 UDP # user datagram protocol
+hmp 20 HMP # host monitoring protocol
+xns-idp 22 XNS-IDP # Xerox NS IDP
+rdp 27 RDP # "reliable datagram" protocol
+iso-tp4 29 ISO-TP4 # ISO Transport Protocol class 4
+xtp 36 XTP # Xpress Tranfer Protocol
+ddp 37 DDP # Datagram Delivery Protocol
+idpr-cmtp 39 IDPR-CMTP # IDPR Control Message Transport
+rspf 73 RSPF #Radio Shortest Path First.
+vmtp 81 VMTP # Versatile Message Transport
+ospf 89 OSPFIGP # Open Shortest Path First IGP
+ipip 94 IPIP # Yet Another IP encapsulation
+encap 98 ENCAP # Yet Another IP encapsulation
View
BIN board/raspberrypi/skeleton/etc/random-seed
Binary file not shown.
View
1 board/raspberrypi/skeleton/etc/resolv.conf
View
51 board/raspberrypi/skeleton/etc/securetty
@@ -0,0 +1,51 @@
+tty1
+tty2
+tty3
+tty4
+tty5
+tty6
+tty7
+tty8
+ttyS0
+ttyS1
+ttyS2
+ttyS3
+ttyAMA0
+ttyAMA1
+ttyAMA2
+ttyAMA3
+ttySAC0
+ttySAC1
+ttySAC2
+ttySAC3
+ttyUL0
+ttyUL1
+ttyUL2
+ttyUL3
+ttyPSC0
+ttyPSC1
+ttyPSC2
+ttyPSC3
+ttyCPM0
+ttyCPM1
+ttyCPM2
+ttyCPM3
+ttymxc0
+ttymxc1
+ttymxc2
+ttyO0
+ttyO1
+ttyO2
+ttyO3
+ttyAM0
+ttyAM1
+ttyAM2
+ttySC0
+ttySC1
+ttySC2
+ttySC3
+ttySC4
+ttySC5
+ttySC6
+ttySC7
+ttyGS0
View
302 board/raspberrypi/skeleton/etc/services
@@ -0,0 +1,302 @@
+# /etc/services:
+# $Id: services,v 1.1 2004/10/09 02:49:18 andersen Exp $
+#
+# Network services, Internet style
+#
+# Note that it is presently the policy of IANA to assign a single well-known
+# port number for both TCP and UDP; hence, most entries here have two entries
+# even if the protocol doesn't support UDP operations.
+# Updated from RFC 1700, ``Assigned Numbers'' (October 1994). Not all ports
+# are included, only the more common ones.
+
+tcpmux 1/tcp # TCP port service multiplexer
+echo 7/tcp
+echo 7/udp
+discard 9/tcp sink null
+discard 9/udp sink null
+systat 11/tcp users
+daytime 13/tcp
+daytime 13/udp
+netstat 15/tcp
+qotd 17/tcp quote
+msp 18/tcp # message send protocol
+msp 18/udp # message send protocol
+chargen 19/tcp ttytst source
+chargen 19/udp ttytst source
+ftp-data 20/tcp
+ftp 21/tcp
+fsp 21/udp fspd
+ssh 22/tcp # SSH Remote Login Protocol
+ssh 22/udp # SSH Remote Login Protocol
+telnet 23/tcp
+# 24 - private
+smtp 25/tcp mail
+# 26 - unassigned
+time 37/tcp timserver
+time 37/udp timserver
+rlp 39/udp resource # resource location
+nameserver 42/tcp name # IEN 116
+whois 43/tcp nicname
+re-mail-ck 50/tcp # Remote Mail Checking Protocol
+re-mail-ck 50/udp # Remote Mail Checking Protocol
+domain 53/tcp nameserver # name-domain server
+domain 53/udp nameserver
+mtp 57/tcp # deprecated
+bootps 67/tcp # BOOTP server
+bootps 67/udp
+bootpc 68/tcp # BOOTP client
+bootpc 68/udp
+tftp 69/udp
+gopher 70/tcp # Internet Gopher
+gopher 70/udp
+rje 77/tcp netrjs
+finger 79/tcp
+www 80/tcp http # WorldWideWeb HTTP
+www 80/udp # HyperText Transfer Protocol
+link 87/tcp ttylink
+kerberos 88/tcp kerberos5 krb5 # Kerberos v5
+kerberos 88/udp kerberos5 krb5 # Kerberos v5
+supdup 95/tcp
+# 100 - reserved
+hostnames 101/tcp hostname # usually from sri-nic
+iso-tsap 102/tcp tsap # part of ISODE.
+csnet-ns 105/tcp cso-ns # also used by CSO name server
+csnet-ns 105/udp cso-ns
+# unfortunately the poppassd (Eudora) uses a port which has already
+# been assigned to a different service. We list the poppassd as an
+# alias here. This should work for programs asking for this service.
+# (due to a bug in inetd the 3com-tsmux line is disabled)
+#3com-tsmux 106/tcp poppassd
+#3com-tsmux 106/udp poppassd
+rtelnet 107/tcp # Remote Telnet
+rtelnet 107/udp
+pop-2 109/tcp postoffice # POP version 2
+pop-2 109/udp
+pop-3 110/tcp # POP version 3
+pop-3 110/udp
+sunrpc 111/tcp portmapper # RPC 4.0 portmapper TCP
+sunrpc 111/udp portmapper # RPC 4.0 portmapper UDP
+auth 113/tcp authentication tap ident
+sftp 115/tcp
+uucp-path 117/tcp
+nntp 119/tcp readnews untp # USENET News Transfer Protocol
+ntp 123/tcp
+ntp 123/udp # Network Time Protocol
+netbios-ns 137/tcp # NETBIOS Name Service
+netbios-ns 137/udp
+netbios-dgm 138/tcp # NETBIOS Datagram Service
+netbios-dgm 138/udp
+netbios-ssn 139/tcp # NETBIOS session service
+netbios-ssn 139/udp
+imap2 143/tcp # Interim Mail Access Proto v2
+imap2 143/udp
+snmp 161/udp # Simple Net Mgmt Proto
+snmp-trap 162/udp snmptrap # Traps for SNMP
+cmip-man 163/tcp # ISO mgmt over IP (CMOT)
+cmip-man 163/udp
+cmip-agent 164/tcp
+cmip-agent 164/udp
+xdmcp 177/tcp # X Display Mgr. Control Proto
+xdmcp 177/udp
+nextstep 178/tcp NeXTStep NextStep # NeXTStep window
+nextstep 178/udp NeXTStep NextStep # server
+bgp 179/tcp # Border Gateway Proto.
+bgp 179/udp
+prospero 191/tcp # Cliff Neuman's Prospero
+prospero 191/udp
+irc 194/tcp # Internet Relay Chat
+irc 194/udp
+smux 199/tcp # SNMP Unix Multiplexer
+smux 199/udp
+at-rtmp 201/tcp # AppleTalk routing
+at-rtmp 201/udp
+at-nbp 202/tcp # AppleTalk name binding
+at-nbp 202/udp
+at-echo 204/tcp # AppleTalk echo
+at-echo 204/udp
+at-zis 206/tcp # AppleTalk zone information
+at-zis 206/udp
+qmtp 209/tcp # The Quick Mail Transfer Protocol
+qmtp 209/udp # The Quick Mail Transfer Protocol
+z3950 210/tcp wais # NISO Z39.50 database
+z3950 210/udp wais
+ipx 213/tcp # IPX
+ipx 213/udp
+imap3 220/tcp # Interactive Mail Access
+imap3 220/udp # Protocol v3
+ulistserv 372/tcp # UNIX Listserv
+ulistserv 372/udp
+https 443/tcp # MCom
+https 443/udp # MCom
+snpp 444/tcp # Simple Network Paging Protocol
+snpp 444/udp # Simple Network Paging Protocol
+saft 487/tcp # Simple Asynchronous File Transfer
+saft 487/udp # Simple Asynchronous File Transfer
+npmp-local 610/tcp dqs313_qmaster # npmp-local / DQS
+npmp-local 610/udp dqs313_qmaster # npmp-local / DQS
+npmp-gui 611/tcp dqs313_execd # npmp-gui / DQS
+npmp-gui 611/udp dqs313_execd # npmp-gui / DQS
+hmmp-ind 612/tcp dqs313_intercell# HMMP Indication / DQS
+hmmp-ind 612/udp dqs313_intercell# HMMP Indication / DQS
+#
+# UNIX specific services
+#
+exec 512/tcp
+biff 512/udp comsat
+login 513/tcp
+who 513/udp whod
+shell 514/tcp cmd # no passwords used
+syslog 514/udp
+printer 515/tcp spooler # line printer spooler
+talk 517/udp
+ntalk 518/udp
+route 520/udp router routed # RIP
+timed 525/udp timeserver
+tempo 526/tcp newdate
+courier 530/tcp rpc
+conference 531/tcp chat
+netnews 532/tcp readnews
+netwall 533/udp # -for emergency broadcasts
+uucp 540/tcp uucpd # uucp daemon
+afpovertcp 548/tcp # AFP over TCP
+afpovertcp 548/udp # AFP over TCP
+remotefs 556/tcp rfs_server rfs # Brunhoff remote filesystem
+klogin 543/tcp # Kerberized `rlogin' (v5)
+kshell 544/tcp krcmd # Kerberized `rsh' (v5)
+kerberos-adm 749/tcp # Kerberos `kadmin' (v5)
+#
+webster 765/tcp # Network dictionary
+webster 765/udp
+#
+# From ``Assigned Numbers'':
+#
+#> The Registered Ports are not controlled by the IANA and on most systems
+#> can be used by ordinary user processes or programs executed by ordinary
+#> users.
+#
+#> Ports are used in the TCP [45,106] to name the ends of logical
+#> connections which carry long term conversations. For the purpose of
+#> providing services to unknown callers, a service contact port is
+#> defined. This list specifies the port used by the server process as its
+#> contact port. While the IANA can not control uses of these ports it
+#> does register or list uses of these ports as a convienence to the
+#> community.
+#
+nfsdstatus 1110/tcp
+nfsd-keepalive 1110/udp
+
+ingreslock 1524/tcp
+ingreslock 1524/udp
+prospero-np 1525/tcp # Prospero non-privileged
+prospero-np 1525/udp
+datametrics 1645/tcp old-radius # datametrics / old radius entry
+datametrics 1645/udp old-radius # datametrics / old radius entry
+sa-msg-port 1646/tcp old-radacct # sa-msg-port / old radacct entry
+sa-msg-port 1646/udp old-radacct # sa-msg-port / old radacct entry
+radius 1812/tcp # Radius
+radius 1812/udp # Radius
+radacct 1813/tcp # Radius Accounting
+radacct 1813/udp # Radius Accounting
+nfsd 2049/tcp nfs
+nfsd 2049/udp nfs
+cvspserver 2401/tcp # CVS client/server operations
+cvspserver 2401/udp # CVS client/server operations
+mysql 3306/tcp # MySQL
+mysql 3306/udp # MySQL
+rfe 5002/tcp # Radio Free Ethernet
+rfe 5002/udp # Actually uses UDP only
+cfengine 5308/tcp # CFengine
+cfengine 5308/udp # CFengine
+bbs 7000/tcp # BBS service
+#
+#
+# Kerberos (Project Athena/MIT) services
+# Note that these are for Kerberos v4, and are unofficial. Sites running
+# v4 should uncomment these and comment out the v5 entries above.
+#
+kerberos4 750/udp kerberos-iv kdc # Kerberos (server) udp
+kerberos4 750/tcp kerberos-iv kdc # Kerberos (server) tcp
+kerberos_master 751/udp # Kerberos authentication
+kerberos_master 751/tcp # Kerberos authentication
+passwd_server 752/udp # Kerberos passwd server
+krb_prop 754/tcp # Kerberos slave propagation
+krbupdate 760/tcp kreg # Kerberos registration
+kpasswd 761/tcp kpwd # Kerberos "passwd"
+kpop 1109/tcp # Pop with Kerberos
+knetd 2053/tcp # Kerberos de-multiplexor
+zephyr-srv 2102/udp # Zephyr server
+zephyr-clt 2103/udp # Zephyr serv-hm connection
+zephyr-hm 2104/udp # Zephyr hostmanager
+eklogin 2105/tcp # Kerberos encrypted rlogin
+#
+# Unofficial but necessary (for NetBSD) services
+#
+supfilesrv 871/tcp # SUP server
+supfiledbg 1127/tcp # SUP debugging
+#
+# Datagram Delivery Protocol services
+#
+rtmp 1/ddp # Routing Table Maintenance Protocol
+nbp 2/ddp # Name Binding Protocol
+echo 4/ddp # AppleTalk Echo Protocol
+zip 6/ddp # Zone Information Protocol
+#
+# Services added for the Debian GNU/Linux distribution
+poppassd 106/tcp # Eudora
+poppassd 106/udp # Eudora
+mailq 174/tcp # Mailer transport queue for Zmailer
+mailq 174/tcp # Mailer transport queue for Zmailer
+omirr 808/tcp omirrd # online mirror
+omirr 808/udp omirrd # online mirror
+rmtcfg 1236/tcp # Gracilis Packeten remote config server
+xtel 1313/tcp # french minitel
+coda_opcons 1355/udp # Coda opcons (Coda fs)
+coda_venus 1363/udp # Coda venus (Coda fs)
+coda_auth 1357/udp # Coda auth (Coda fs)
+coda_udpsrv 1359/udp # Coda udpsrv (Coda fs)
+coda_filesrv 1361/udp # Coda filesrv (Coda fs)
+codacon 1423/tcp venus.cmu # Coda Console (Coda fs)
+coda_aux1 1431/tcp # coda auxiliary service (Coda fs)
+coda_aux1 1431/udp # coda auxiliary service (Coda fs)
+coda_aux2 1433/tcp # coda auxiliary service (Coda fs)
+coda_aux2 1433/udp # coda auxiliary service (Coda fs)
+coda_aux3 1435/tcp # coda auxiliary service (Coda fs)
+coda_aux3 1435/udp # coda auxiliary service (Coda fs)
+cfinger 2003/tcp # GNU Finger
+afbackup 2988/tcp # Afbackup system
+afbackup 2988/udp # Afbackup system
+icp 3130/tcp # Internet Cache Protocol (Squid)
+icp 3130/udp # Internet Cache Protocol (Squid)
+postgres 5432/tcp # POSTGRES
+postgres 5432/udp # POSTGRES
+fax 4557/tcp # FAX transmission service (old)
+hylafax 4559/tcp # HylaFAX client-server protocol (new)
+noclog 5354/tcp # noclogd with TCP (nocol)
+noclog 5354/udp # noclogd with UDP (nocol)
+hostmon 5355/tcp # hostmon uses TCP (nocol)
+hostmon 5355/udp # hostmon uses TCP (nocol)
+ircd 6667/tcp # Internet Relay Chat
+ircd 6667/udp # Internet Relay Chat
+webcache 8080/tcp # WWW caching service
+webcache 8080/udp # WWW caching service
+tproxy 8081/tcp # Transparent Proxy
+tproxy 8081/udp # Transparent Proxy
+mandelspawn 9359/udp mandelbrot # network mandelbrot
+amanda 10080/udp # amanda backup services
+amandaidx 10082/tcp # amanda backup services
+amidxtape 10083/tcp # amanda backup services
+isdnlog 20011/tcp # isdn logging system
+isdnlog 20011/udp # isdn logging system
+vboxd 20012/tcp # voice box system
+vboxd 20012/udp # voice box system
+binkp 24554/tcp # Binkley
+binkp 24554/udp # Binkley
+asp 27374/tcp # Address Search Protocol
+asp 27374/udp # Address Search Protocol
+tfido 60177/tcp # Ifmail
+tfido 60177/udp # Ifmail
+fido 60179/tcp # Ifmail
+fido 60179/udp # Ifmail
+
+# Local services
+
View
13 board/raspberrypi/skeleton/etc/shadow
@@ -0,0 +1,13 @@
+root::10933:0:99999:7:::
+bin:*:10933:0:99999:7:::
+daemon:*:10933:0:99999:7:::
+adm:*:10933:0:99999:7:::
+lp:*:10933:0:99999:7:::
+sync:*:10933:0:99999:7:::
+shutdown:*:10933:0:99999:7:::
+halt:*:10933:0:99999:7:::
+uucp:*:10933:0:99999:7:::
+operator:*:10933:0:99999:7:::
+ftp:*:10933:0:99999:7:::
+nobody:*:10933:0:99999:7:::
+default::10933:0:99999:7:::
View
0 board/raspberrypi/skeleton/home/ftp/.empty
No changes.
View
0 board/raspberrypi/skeleton/lib/.empty
No changes.
View
0 board/raspberrypi/skeleton/media/.empty
No changes.
View
0 board/raspberrypi/skeleton/mnt/.empty
No changes.
View
0 board/raspberrypi/skeleton/opt/.empty
No changes.
View
0 board/raspberrypi/skeleton/proc/.empty
No changes.
View
0 board/raspberrypi/skeleton/root/.bash_history
No changes.
View
7 board/raspberrypi/skeleton/root/.bash_logout
@@ -0,0 +1,7 @@
+# ~/.bash_logout: executed by bash(1) when login shell exits.
+
+# when leaving the console clear the screen to increase privacy
+
+case "`tty`" in
+ /dev/tty[0-9]*) clear
+esac
View
15 board/raspberrypi/skeleton/root/.bash_profile
@@ -0,0 +1,15 @@
+# .bash_profile
+
+export PATH=\
+/bin:\
+/sbin:\
+/usr/bin:\
+/usr/sbin:\