Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Sony Ericsson J110i appears in code but not in the db #469

Open
bruceleerabbit opened this issue May 12, 2019 · 0 comments

Comments

Projects
None yet
1 participant
@bruceleerabbit
Copy link

commented May 12, 2019

Should the Sony Ericsson J110i work? It is unlisted, but the code seems to make a reference to it.

I have connected a DCU-65 (USB-to-proprietary) data cable to the phone, but lsusb shows no new device after connecting the phone but I think that much is normal. However, Wammu also does not find the phone. The phone is powered on, but I see no menu option on the phone for putting it into a special debug mode.

Note that when there was no additional lsusb device, I returned the cable in exchange for another under the assumption that the cable was bad. The replacement cable is apparently no different.

When monitoring /var/log/syslog, this instantly appears the very instant I begin holding down the power button on the phone:

usb 6-1: new low-speed USB device number 2 using uhci_hcd
usb 6-1: device descriptor read/64, error -71
usb 6-1: device descriptor read/64, error -71
usb 6-1: new low-speed USB device number 3 using uhci_hcd
usb 6-1: device descriptor read/64, error -71
usb 6-1: device descriptor read/64, error -71
usb usb6-port1: attempt power cycle
usb 6-1: new low-speed USB device number 4 using uhci_hcd
usb 6-1: device not accepting address 4, error -71

This log is produced seemingly before the phone boots. It almost seems like an anomaly during powerup because if I keep the phone on and unplug+replug the USB there is no new log generated.

The desktop is debian stable.


Want to back this issue? Post a bounty on it! We accept bounties via Bountysource.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.