Prusalink customapi example

[chickey]

Wasn't sure where to post this but I've switched to prusalink/prusaconnect recently from octoprint and missed the nice homepage integration so have knocked the following up, you just need to update your IP and api key and you should be sorted. Thought it may be of use to others.

Initially there is no api key generated on a prusalink install and it will be blank, you just need to click reset and it'll create this one. This won't affect the printers connection to prusaconnect if your using that also.

I am using pi zero's but do not have them powered from the printer board so i can power the printers off when not in use. When you do this however the status that then gets returned is ERROR. I've remapped that to show powered off which works in my case but you can always remove that part.

I've used the additional field option so that the target and actual temp of the nozzle and bed are shown on a single line rather than taking up 4 lines. As it's a list you can just append more onto the end.

I've used /api/v1/status rather than /api/v1/job as it returns data even when a job is not running and you also get the extra information such as nozzle temps etc. One point to note is that the temp data will remain even if you power off the printer so if the nozzle was still at say 60 degrees and you power off the printer it won't get an updated value until you power the printer back on so will still show 60 no matter how long after. Not a biggie but just one to be aware of. Interesting also that the target temps don't get updated until it's actually printing so while it's doing the bed leveling etc it shows the target as 0 even though it's already up to temp.

Updated for typos.

- Prusa MK3s 1:
    icon: mdi-printer-3d-nozzle
    href: http://<printer IP>/
    description: Main printer
    widget:
      type: customapi
      url: http://<printer IP>/api/v1/status
      refreshInterval: 10000 # optional - in milliseconds, defaults to 10s
      method: GET # optional, e.g. POST
      headers:
        X-Api-Key: <api key>
      display: list
      mappings:
        - field: 
            job: progress
          format: percent
          label: Progress
          remap:
            - value: Null
              to: 0
        - field: 
            printer: state
          format: text
          label: Status
          remap:
            - value: "ERROR"
              to: "Powered off"
        - field: 
            job: time_remaining
          format: number
          label: Time Remaining
          suffix: " minutes"
          scale: 0.0166667 # Converts seconds to minutes
        - field: 
            job:  time_printing
          format: number
          label: Time Printing
          suffix: " minutes"
          scale: 0.0166667 # Converts seconds to minutes
        - field: 
            printer: temp_nozzle
          label: Nozzle Temp / Target
          format: number
          suffix: "c"
          additionalField:
            field: 
              printer: target_nozzle
            format: number
            suffix: "c"
        - field: 
            printer: temp_bed
          label: Nozzle Bed / Target
          format: number
          suffix: "c"
          additionalField:
            field: 
              printer: target_bed
            format: number
            suffix: "c"
        - field:
            printer: fan_hotend
          label: Hotend Fan Speed
          format: number
          suffix: "rpm"

[github-actions[bot]]

This discussion has been automatically closed due to inactivity. See our contributing guidelines for more details.

[github-actions[bot]]

This discussion has been automatically locked since there has not been any recent activity after it was closed. Please open a new discussion for related concerns. See our contributing guidelines for more details.