Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Tree: 301b37255f
Fetching contributors…

Cannot retrieve contributors at this time

executable file 813 lines (691 sloc) 24.094 kB
#!/usr/bin/perl -w
use strict;
use Cwd;
$| = 1; # autoflush stdout after each print, to avoid output after die
my $defaultrepo;
my @packages;
my $verbose = 2;
my $try_to_resume = 0;
my $ignore_failure = 0;
my $checked_out_flag = 0; # NOT the opposite of bare_flag (describes remote repo state)
my $get_mode;
my $bare_flag = ""; # NOT the opposite of checked_out_flag (describes local repo state)
my %tags;
# Figure out where to get the other repositories from.
sub getrepo {
my $repo;
if (defined($defaultrepo)) {
$repo = $defaultrepo;
chomp $repo;
} else {
# Figure out where to get the other repositories from,
# based on where this GHC repo came from.
my $git_dir = $bare_flag ? "--git-dir=ghc.git" : "";
my $branch = `git $git_dir branch | grep "\* " | sed "s/^\* //"`; chomp $branch;
my $remote = `git $git_dir config branch.$branch.remote`; chomp $remote;
if ($remote eq "") {
# remotes are not mandatory for branches (e.g. not recorded by default for bare repos)
$remote = "origin";
}
$repo = `git $git_dir config remote.$remote.url`; chomp $repo;
}
my $repo_base;
my $checked_out_tree;
if ($repo =~ /^...*:/) {
# HTTP or SSH
# Above regex says "at least two chars before the :", to avoid
# catching Win32 drives ("C:\").
$repo_base = $repo;
# --checked-out is needed if you want to use a checked-out repo
# over SSH or HTTP
if ($checked_out_flag) {
$checked_out_tree = 1;
} else {
$checked_out_tree = 0;
}
# Don't drop the last part of the path if specified with -r, as
# it expects repos of the form:
#
# http://darcs.haskell.org
#
# rather than
#
# http://darcs.haskell.org/ghc
#
if (!$defaultrepo) {
$repo_base =~ s#/[^/]+/?$##;
}
}
elsif ($repo =~ /^\/|\.\.\/|.:(\/|\\)/) {
# Local filesystem, either absolute (C:/ or /) or relative (../) path
$repo_base = $repo;
if (-f "$repo/HEAD") {
# assume a local mirror:
$checked_out_tree = 0;
$repo_base =~ s#/[^/]+/?$##;
} elsif (-d "$repo/ghc.git") {
# assume a local mirror:
$checked_out_tree = 0;
} else {
# assume a checked-out tree:
$checked_out_tree = 1;
}
}
else {
die "Couldn't work out repo";
}
return $repo_base, $checked_out_tree;
}
sub parsePackages {
my @repos;
my $lineNum;
open IN, "< packages.conf"
or open IN, "< packages" # clashes with packages directory when using --bare
or die "Can't open packages file (or packages.conf)";
@repos = <IN>;
close IN;
@packages = ();
$lineNum = 0;
foreach (@repos) {
chomp;
$lineNum++;
if (/^([^# ]+) +([^ ]+) +([^ ]+) +([^ ]+)$/) {
my %line;
$line{"localpath"} = $1;
$line{"tag"} = $2;
$line{"remotepath"} = $3;
$line{"vcs"} = $4;
push @packages, \%line;
}
elsif (! /^(#.*)?$/) {
die "Bad content on line $lineNum of packages file: $_";
}
}
}
sub message {
if ($verbose >= 2) {
print "@_\n";
}
}
sub warning {
if ($verbose >= 1) {
print "warning: @_\n";
}
}
sub gitNewWorkdir {
my $dir = shift;
my $target = shift;
my $target_dir = "$target/$dir";
my $pwd;
if ($dir eq '.') {
message "== running git-new-workdir . $target_dir @_";
} else {
message "== $dir: running git-new-workdir . $target_dir @_";
$pwd = getcwd();
chdir($dir);
}
system ("git-new-workdir", ".", $target_dir, @_) == 0
or $ignore_failure
or die "git-new-workdir failed: $?";
if ($dir ne '.') {
chdir($pwd);
}
}
sub scm {
my $dir = shift;
my $scm = shift;
my $pwd;
if ($dir eq '.') {
message "== running $scm @_";
} else {
message "== $dir: running $scm @_";
$pwd = getcwd();
chdir($dir);
}
system ($scm, @_) == 0
or $ignore_failure
or die "$scm failed: $?";
if ($dir ne '.') {
chdir($pwd);
}
}
sub scmall {
my $command = shift;
my $localpath;
my $tag;
my $remotepath;
my $scm;
my $line;
my $branch_name;
my $subcommand;
my $path;
my $wd_before = getcwd;
my $pwd;
my @args;
my $started;
my $doing;
my $start_repo;
my ($repo_base, $checked_out_tree) = getrepo();
my $is_github_repo = $repo_base =~ m/(git@|git:\/\/|https:\/\/)github.com/;
parsePackages;
@args = ();
if ($command =~ /^remote$/) {
while (@_ > 0 && $_[0] =~ /^-/) {
push(@args,shift);
}
if (@_ < 1) { help(1); }
$subcommand = shift;
if ($subcommand ne 'add' && $subcommand ne 'rm' && $subcommand ne 'set-url') {
help(1);
}
while (@_ > 0 && $_[0] =~ /^-/) {
push(@args,shift);
}
if (($subcommand eq 'add' || $subcommand eq 'rm') && @_ < 1) {
help(1);
} elsif (@_ < 1) { # set-url
$branch_name = 'origin';
} else {
$branch_name = shift;
}
} elsif ($command eq 'new') {
if (@_ < 1) {
$branch_name = 'origin';
} else {
$branch_name = shift;
}
}
push(@args, @_);
# $doing is a good enough approximation to what we are doing that
# we can use it to check that --resume is resuming the right command
$doing = join(" ", ($command, @args));
$started = 1;
if ($try_to_resume && -f "resume") {
my $what;
open RESUME, "< resume"
or die "Can't open resume file";
$start_repo = <RESUME>;
chomp $start_repo;
$what = <RESUME>;
chomp $what;
close RESUME;
if ($what eq $doing) {
$started = 0;
}
}
for $line (@packages) {
$tag = $$line{"tag"};
$scm = $$line{"vcs"};
# Use the "remote" structure for bare git repositories
$localpath = ($bare_flag && $scm eq "git") ?
$$line{"remotepath"} : $$line{"localpath"};
$remotepath = ($checked_out_tree) ?
$$line{"localpath"} : $$line{"remotepath"};
if (!$started) {
if ($start_repo eq $localpath) {
$started = 1;
}
else {
next;
}
}
open RESUME, "> resume.tmp";
print RESUME "$localpath\n";
print RESUME "$doing\n";
close RESUME;
rename "resume.tmp", "resume";
# Check the SCM is OK as early as possible
die "Unknown SCM: $scm" if (($scm ne "darcs") and ($scm ne "git"));
# We can't create directories on GitHub, so we translate
# "packages/foo" into "package-foo".
if ($is_github_repo) {
$remotepath =~ s/\//-/;
}
# Construct the path for this package in the repo we pulled from
$path = "$repo_base/$remotepath";
if ($command =~ /^(?:g|ge|get)$/) {
# Skip any repositories we have not included the tag for
if (not defined($tags{$tag})) {
$tags{$tag} = 0;
}
if ($tags{$tag} == 0) {
next;
}
if (-d $localpath) {
warning("$localpath already present; omitting")
if $localpath ne ".";
if ($scm eq "git") {
scm ($localpath, $scm, "config", "core.ignorecase", "true");
}
next;
}
# Note that we use "." as the path, as $localpath
# doesn't exist yet.
if ($scm eq "darcs") {
# The first time round the loop, default the get-mode
if (not defined($get_mode)) {
warning("adding --partial, to override use --complete");
$get_mode = "--partial";
}
scm (".", $scm, "get", $get_mode, $path, $localpath, @args);
}
else {
my @argsWithBare = @args;
push @argsWithBare, $bare_flag if $bare_flag;
scm (".", $scm, "clone", $path, $localpath, @argsWithBare);
scm ($localpath, $scm, "config", "core.ignorecase", "true");
}
next;
}
my $darcs_repo_present = 1 if -d "$localpath/_darcs";
my $git_repo_present = 1 if -d "$localpath/.git" || ($bare_flag && -d "$localpath");
if ($darcs_repo_present) {
if ($git_repo_present) {
die "Found both _darcs and .git in $localpath";
}
$scm = "darcs";
} elsif ($git_repo_present) {
$scm = "git";
} elsif ($tag eq "") {
die "Required repo $localpath is missing";
} else {
message "== $localpath repo not present; skipping";
next;
}
# Work out the arguments we should give to the SCM
if ($command =~ /^(?:w|wh|wha|what|whats|whatsn|whatsne|whatsnew|status)$/) {
if ($scm eq "darcs") {
$command = "whatsnew";
}
elsif ($scm eq "git") {
$command = "status";
}
else {
die "Unknown scm";
}
# Hack around 'darcs whatsnew' failing if there are no changes
$ignore_failure = 1;
scm ($localpath, $scm, $command, @args);
}
elsif ($command =~ /^commit$/) {
# git fails if there is nothing to commit, so ignore failures
$ignore_failure = 1;
scm ($localpath, $scm, "commit", @args);
}
elsif ($command =~ /^(?:pus|push)$/) {
scm ($localpath, $scm, "push", @args);
}
elsif ($command =~ /^(?:pul|pull)$/) {
scm ($localpath, $scm, "pull", @args);
}
elsif ($command =~ /^(?:new-workdir)$/) {
gitNewWorkdir ($localpath, @args);
}
elsif ($command =~ /^(?:s|se|sen|send)$/) {
if ($scm eq "darcs") {
$command = "send";
}
elsif ($scm eq "git") {
$command = "send-email";
}
else {
die "Unknown scm";
}
scm ($localpath, $scm, $command, @args);
}
elsif ($command =~ /^fetch$/) {
scm ($localpath, $scm, "fetch", @args);
}
elsif ($command =~ /^new$/) {
my @scm_args = ("log", "$branch_name..");
scm ($localpath, $scm, @scm_args, @args);
}
elsif ($command =~ /^log$/) {
scm ($localpath, $scm, "log", @args);
}
elsif ($command =~ /^remote$/) {
my @scm_args;
$ignore_failure = 1;
if ($subcommand eq 'add') {
@scm_args = ("remote", "add", $branch_name, $path);
} elsif ($subcommand eq 'rm') {
@scm_args = ("remote", "rm", $branch_name);
} elsif ($subcommand eq 'set-url') {
@scm_args = ("remote", "set-url", $branch_name, $path);
}
scm ($localpath, $scm, @scm_args, @args);
}
elsif ($command =~ /^checkout$/) {
# Not all repos are necessarily branched, so ignore failure
$ignore_failure = 1;
scm ($localpath, $scm, "checkout", @args)
unless $scm eq "darcs";
}
elsif ($command =~ /^grep$/) {
# Hack around 'git grep' failing if there are no matches
$ignore_failure = 1;
scm ($localpath, $scm, "grep", @args)
unless $scm eq "darcs";
}
elsif ($command =~ /^diff$/) {
scm ($localpath, $scm, "diff", @args)
unless $scm eq "darcs";
}
elsif ($command =~ /^clean$/) {
scm ($localpath, $scm, "clean", @args)
unless $scm eq "darcs";
}
elsif ($command =~ /^reset$/) {
scm ($localpath, $scm, "reset", @args)
unless $scm eq "darcs";
}
elsif ($command =~ /^branch$/) {
scm ($localpath, $scm, "branch", @args)
unless $scm eq "darcs";
}
elsif ($command =~ /^config$/) {
scm ($localpath, $scm, "config", @args)
unless $scm eq "darcs";
}
elsif ($command =~ /^repack$/) {
scm ($localpath, $scm, "repack", @args)
if $scm eq "git"
}
elsif ($command =~ /^format-patch$/) {
scm ($localpath, $scm, "format-patch", @args)
if $scm eq "git"
}
elsif ($command =~ /^gc$/) {
scm ($localpath, $scm, "gc", @args)
unless $scm eq "darcs";
}
elsif ($command =~ /^tag$/) {
scm ($localpath, $scm, "tag", @args);
}
else {
die "Unknown command: $command";
}
}
unlink "resume";
}
sub help
{
my $exit = shift;
# Get the built in help
my $help = <<END;
Usage:
./sync-all [-q] [-s] [--ignore-failure] [-r repo] [--checked-out] [--bare]
[--nofib] [--extra] [--testsuite] [--no-dph] [--resume]
cmd [git flags]
Applies the command "cmd" to each repository in the tree.
A full repository tree is obtained by first cloning the ghc
repository, then getting the subrepositories with "sync-all get":
\$ git clone http://darcs.haskell.org/ghc.git
\$ cd ghc
\$ ./sync-all get
After this, "./sync-all pull" will pull from the original repository
tree.
A remote pointing to another local repository tree can be added like
this:
\$ ./sync-all -r /path/to/ghc remote add otherlocal
and then we can pull from this other tree with
\$ ./sync-all pull otherlocal
-------------- Commands -----------------
get
Clones all sub-repositories from the same place that the ghc
repository was cloned from. See "which repos to use" below
for details of how the subrepositories are laid out.
There are various --<package-tag> options that can be given
before "get" that enable extra repositories. The full list is
given at the end of this help. For example:
./sync-all --testsuite get
would get the testsuite repository in addition to the usual set of
subrepositories.
remote add <remote-name>
remote rm <remote-name>
remote set-url [--push] <remote-name>
Runs a "git remote" command on each subrepository, adjusting the
repository location in each case appropriately. For example, to
add a new remote pointing to the upstream repositories:
./sync-all -r http://darcs.haskell.org/ remote add upstream
The -r flag points to the root of the repository tree (see "which
repos to use" below). For a repository on the local filesystem it
would point to the ghc repository, and for a remote repository it
points to the directory containing "ghc.git".
These commands just run the equivalent git command on each repository, passing
any extra arguments to git:
branch
checkout
clean
commit
config
diff
fetch
format-patch
gc
grep
log
new
new-workdir
pull
push
repack
reset
send
status
tag
-------------- Flags -------------------
These flags are given *before* the command and modify the way sync-all behaves.
Flags given *after* the command are passed to git.
-q says to be quiet, and -s to be silent.
--resume will restart a command that failed, from the repo at which it
failed. This means you don't need to wait while, e.g., "pull" goes through
all the repos it's just pulled, and tries to pull them again.
--ignore-failure says to ignore errors and move on to the next repository
-r repo says to use repo as the location of package repositories
--checked-out says that the remote repo is in checked-out layout, as opposed
to the layout used for the main repo. By default a repo on the local
filesystem is assumed to be checked-out, and repos accessed via HTTP or SSH
are assumed to be in the main repo layout; use --checked-out to override the
latter.
--bare says that the local repo is in bare layout, same as the main repo. It
also means that these repos are bare. You only have to use this flag if you
don't have a bare ghc.git in the current directory and would like to 'get'
all of the repos bare. Requires packages.conf to be present in the current
directory (a renamed packages file from the main ghc repo).
Note: --checked-out and --bare flags are NOT the opposite of each other.
--checked-out: describes the layout of the remote repository tree.
--bare: describes the layout of the local repository tree.
--nofib also clones the nofib benchmark suite
--testsuite also clones the ghc testsuite
--extra also clone some extra library packages
--no-dph avoids cloning the dph pacakges
------------ Checking out a branch -------------
To check out a branch you can run the following command:
\$ ./sync-all checkout ghc-7.4
------------ Which repos to use -------------
sync-all uses the following algorithm to decide which remote repos to use
It always computes the remote repos from a single base, <repo_base> How is
<repo_base> set? If you say "-r repo", then that's <repo_base> otherwise
<repo_base> is set by asking git where the ghc repo came from, and removing the
last component (e.g. /ghc.git/ or /ghc/).
Then sync-all iterates over the package found in the file ./packages; see that
file for a description of the contents.
If <repo_base> looks like a local filesystem path, or if you give the
--checked-out flag, sync-all works on repos of form:
<repo_base>/<local-path>
otherwise sync-all works on repos of form:
<repo_base>/<remote-path>
This logic lets you say
both sync-all -r http://darcs.haskell.org/ghc-6.12 remote add ghc-6.12
and sync-all -r ../working remote add working
The latter is called a "checked-out tree".
sync-all *ignores* the defaultrepo of all repos other than the root one. So the
remote repos must be laid out in one of the two formats given by <local-path>
and <remote-path> in the file 'packages'.
Available package-tags are:
END
# Collect all the tags in the packages file
my %available_tags;
open IN, "< packages.conf"
or open IN, "< packages" # clashes with packages directory when using --bare
or die "Can't open packages file (or packages.conf)";
while (<IN>) {
chomp;
if (/^([^# ]+) +(?:([^ ]+) +)?([^ ]+) +([^ ]+)/) {
if (defined($2) && $2 ne "-") {
$available_tags{$2} = 1;
}
}
elsif (! /^(#.*)?$/) {
die "Bad line: $_";
}
}
close IN;
# Show those tags and the help text
my @available_tags = keys %available_tags;
print "$help@available_tags\n\n";
exit $exit;
}
sub main {
$tags{"-"} = 1;
$tags{"dph"} = 1;
while ($#_ ne -1) {
my $arg = shift;
# We handle -q here as well as lower down as we need to skip over it
# if it comes before the source-control command
if ($arg eq "-q") {
$verbose = 1;
}
elsif ($arg eq "-s") {
$verbose = 0;
}
elsif ($arg eq "-r") {
$defaultrepo = shift;
}
elsif ($arg eq "--resume") {
$try_to_resume = 1;
}
elsif ($arg eq "--ignore-failure") {
$ignore_failure = 1;
}
elsif ($arg eq "--complete" || $arg eq "--partial") {
$get_mode = $arg;
}
# Use --checked-out if the _remote_ repos are a checked-out tree,
# rather than the master trees.
elsif ($arg eq "--checked-out") {
$checked_out_flag = 1;
}
# Use --bare if the _local_ repos are bare repos,
# rather than a checked-out tree.
elsif ($arg eq "--bare") {
$bare_flag = $arg;
}
elsif ($arg eq "--help") {
help(0);
}
# --<tag> says we grab the libs tagged 'tag' with
# 'get'. It has no effect on the other commands.
elsif ($arg =~ m/^--no-(.*)$/) {
$tags{$1} = 0;
}
elsif ($arg =~ m/^--(.*)$/) {
$tags{$1} = 1;
}
else {
unshift @_, $arg;
if (grep /^-q$/, @_) {
$verbose = 1;
}
last;
}
}
# check for ghc repositories in cwd
my $checked_out_found = 1 if (-d ".git" && -d "compiler");
my $bare_found = 1 if (-d "ghc.git");
if ($bare_flag && ! $bare_found && ! $defaultrepo) {
die "error: bare repository ghc.git not found.\n"
. " Either clone a bare ghc repo first or specify the repo location. E.g.:\n"
. " ./sync-all --bare [--testsuite --nofib --extra] -r http://darcs.haskell.org/ get\n"
}
elsif ($bare_found) {
$bare_flag = "--bare";
}
elsif (! $bare_flag && ! $checked_out_found) {
die "error: sync-all must be run from the top level of the ghc tree.";
}
if ($#_ eq -1) {
help(1);
}
else {
# Give the command and rest of the arguments to the main loop
scmall @_;
}
}
END {
my $ec = $?;
my $pwd = getcwd();
message "== Checking for old haddock repo";
if (-d "utils/haddock/.git") {
chdir("utils/haddock");
if ((system "git log -1 87e2ca11c3d1b1bc49900fba0b5c5c6f85650718 > /dev/null 2> /dev/null") == 0) {
print <<EOF;
============================
ATTENTION!
You have an old haddock repository in your GHC tree!
Please remove it (e.g. "rm -r utils/haddock"), and then run
"./sync-all get" to get the new repository.
============================
EOF
}
chdir($pwd);
}
message "== Checking for old binary repo";
if (-d "libraries/binary/.git") {
chdir("libraries/binary");
if ((system "git log -1 749ac0efbde3b14901417364a872796598747aaf > /dev/null 2> /dev/null") == 0) {
print <<EOF;
============================
ATTENTION!
You have an old binary repository in your GHC tree!
Please remove it (e.g. "rm -r libraries/binary"), and then run
"./sync-all get" to get the new repository.
============================
EOF
}
chdir($pwd);
}
message "== Checking for old mtl repo";
if (-d "libraries/mtl/.git") {
chdir("libraries/mtl");
if ((system "git log -1 c67d8f7247c612dc35242bc67e616f7ea35eadb9 > /dev/null 2> /dev/null") == 0) {
print <<EOF;
============================
ATTENTION!
You have an old mtl repository in your GHC tree!
Please remove it (e.g. "rm -r libraries/mtl"), and then run
"./sync-all get" to get the new repository.
============================
EOF
}
chdir($pwd);
}
message "== Checking for old Cabal repo";
if (-d "libraries/Cabal/.git") {
chdir("libraries/Cabal");
if ((system "git log -1 c8ebd66a32865f72ae03ee0663c62df3d77f08fe > /dev/null 2> /dev/null") == 0) {
print <<EOF;
============================
ATTENTION!
You have an old Cabal repository in your GHC tree!
Please remove it (e.g. "rm -r libraries/Cabal"), and then run
"./sync-all get" to get the new repository.
============================
EOF
}
chdir($pwd);
}
$? = $ec;
}
main(@ARGV);
Jump to Line
Something went wrong with that request. Please try again.