Permalink
Commits on Jul 10, 2005
  1. [PATCH] alternate object store and fsck

    Junio C Hamano committed with Linus Torvalds Jul 10, 2005
    The location alt_odb[j].name[0..] is filled with ??/?{38} to form a sha1
    filename to try, but I was too lazy to allocate a copy, so while
    fsck_object_dir() is running for the directory, the filenames ??/?{38}
    are filled after NUL (usually and always the location should have '/'),
    making them "not found".
    
    This should fix it.
    
    Signed-off-by: Linus Torvalds <torvalds@osdl.org>
  2. Fix up progress report for off-by-one error

    Linus Torvalds committed Jul 10, 2005
    We used to print the index of the object we unpacked, not how many we
    had unpacked.  Which caused slightly confusing progress reports like
    
    	100% (2/3) done
    
    rather than the more obvious "3/3" for 100% ;)
  3. Make "git log" exit properly if not in a git archive

    Linus Torvalds committed Jul 10, 2005
    Instead of getting an incomprehensible error message from git-rev-list.
  4. Avoid signedness warnings in sha1_file.c

    Linus Torvalds committed Jul 10, 2005
    Very irritating.  But "snprintf()" wants "char *", and zlib wants
    "unsigned char *".
  5. [PATCH] Remove map_sha1_file

    Daniel Barkalow committed with Linus Torvalds Jul 10, 2005
    Remove map_sha1_file(), now unused.
    
    Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
    Signed-off-by: Linus Torvalds <torvalds@osdl.org>
  6. [PATCH] write_sha1_to_fd()

    Daniel Barkalow committed with Linus Torvalds Jul 10, 2005
    Add write_sha1_to_fd(), which writes an object to a file descriptor. This
    includes support for unpacking it and recompressing it.
    
    Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
    Signed-off-by: Linus Torvalds <torvalds@osdl.org>
  7. git-rev-list: allow missing objects when the parent is marked UNINTER…

    Linus Torvalds committed Jul 10, 2005
    …ESTING
    
    We still want the "top-most" uninteresting object to exist, so that we
    know that we have reached it.
Commits on Jul 9, 2005
  1. Add "-q" flag to "git commit"

    Linus Torvalds committed Jul 9, 2005
    Maybe you don't want the progress report.
  2. git-unpack-objects: show progress report by default

    Linus Torvalds committed Jul 9, 2005
    This ends up being very calming for big "git clone"s, since otherwise
    you just get very frustrated with a long silence, wondering whether it's
    working at all.
    
    Use "-q" to quiet it down.
    
    Now if we could just do the same for the initial "figure out what to
    pack" phase, which can also be quite slow if the other end is busy (or
    not packed and not in cache)...
  3. [PATCH] format-patch: fix skipping of blank-lines

    Junio C Hamano committed with Linus Torvalds Jul 9, 2005
    If it is fed a commit with more than one leading blank lines,
    the sed scripts git-format-patch-script used looped forever.
    Using git-stripspace upfront makes the sed script somewhat
    simpler to work around this problem.
    
    Also use git-rev-parse so that we can say
    
        $ git-format-patch-script HEAD^^^^
    
    to prepare the latest four patches for e-mail submission.
    
    Signed-off-by: Junio C Hamano <junkio@cox.net>
    Signed-off-by: Linus Torvalds <torvalds@osdl.org>
  4. Update the tutorial a bit

    Linus Torvalds committed Jul 9, 2005
    Add notes on branches, merging, tagging, and update some of the usage to
    the friendlier "git cmd" syntax.
    
    It's still ridiculously lacking, but perhaps it's a _bit_ more useful.
  5. Make "git tag" more user-friendly

    Linus Torvalds committed Jul 9, 2005
    Instead of having to cut-and-paste the result, write it to the tag
    directory directly.  Also, start an editor for the tag message, rather
    than just reading it from stdin.
  6. Make "git resolve" take the merge message in $3

    Linus Torvalds committed Jul 9, 2005
    It used to do "Merge $3" as the message, but that ends up being
    inconvenient, and much more easily done inside git-pull-script instead.
    
    This makes the third argument to "git resolve" much easier to explain.
  7. [PATCH] Use SHA1 for git-update-cache --refresh

    bryanlarsen committed with Linus Torvalds Jul 8, 2005
    Change git-update-cache --refresh behaviour to use sha1's rather than
    comparing byte by byte.
    
    [JC demangled whitespace from the posted patch himself because he
     liked it so much.  Also adjusted to the index_fd() interface
     slightly done differently from the original one.]
    
    Signed-off-by: Bryan Larsen <bryan.larsen@gmail.com>
    Signed-off-by: Junio C Hamano <junkio@cox.net>
    Signed-off-by: Linus Torvalds <torvalds@osdl.org>
  8. [PATCH] Add --info-only option to git-update-cache.

    bryanlarsen committed with Linus Torvalds Jul 8, 2005
    Add --info-only option to git-update-cache.
    
    [JC demangled whitespace from the posted patch himself because he
     liked it so much.  Also adjusted to the index_fd() interface
     slightly done differently from the original one.]
    
    Signed-off-by: Bryan Larsen <bryan.larsen@gmail.com>
    Signed-off-by: Junio C Hamano <junkio@cox.net>
    Signed-off-by: Linus Torvalds <torvalds@osdl.org>
  9. [PATCH] Expose object ID computation functions.

    bryanlarsen committed with Linus Torvalds Jul 8, 2005
    This patch makes the first half of write_sha1_file() and
    index_fd() externally visible, to allow callers to compute the
    object ID without actually storing it in the object database.
    
    [JC demangled the whitespaces himself because he liked the patch
     so much, and reworked the interface to index_fd() slightly,
     taking suggestion from Linus and of his own.]
    
    Signed-off-by: Bryan Larsen <bryan.larsen@gmail.com>
    Signed-off-by: Junio C Hamano <junkio@cox.net>
    Signed-off-by: Linus Torvalds <torvalds@osdl.org>
  10. Teach "git clone" about rsync sources

    Linus Torvalds committed Jul 9, 2005
    That will be the normal way of cloning anonymously for a while, so let's
    make sure it's easy to use.
Commits on Jul 8, 2005
  1. Make "upload-pack" match git-fetch-pack usage

    Linus Torvalds committed Jul 8, 2005
    Do the default "try xyz.git xyz fails" thing for the directory we get
    passed in.
  2. Add "mkpath()" helper function

    Linus Torvalds committed Jul 8, 2005
    I'm bored with doing it by hand all the time.
  3. Mark git-relink-script and git-repack-script executable

    Linus Torvalds committed Jul 8, 2005
    Sure, "install" will default to installing it executable anyway, but
    this is the right thing to do.
  4. Make "git clone" a lot more user-friendly

    Linus Torvalds committed Jul 8, 2005
    This silently adds the ".git" directory component if needed, so you
    don't need to state it explicitly for the source.  Also, it turns the
    source into an absolute pathname when local, so that you can use
    relative pathnames without losing sight of the source when we cd into
    the destination.
  5. Add "git-push-script" to make a more regular interface

    Linus Torvalds committed Jul 8, 2005
    It only does local and ssh pushes, because it's really just a wrapper
    for git-send-pack.  We might make it do an rsync mirror or something, of
    course.
  6. Teach 'git-send-pack' to send new branches and tags.

    Linus Torvalds committed Jul 8, 2005
    The protocol always supported it, but send-pack didn't actually know how
    to tell the other side about a new branch/tag.
    
    NOTE! You'll have to name it explicitly on the command line: if you
    don't name any branches, git-send-pack will default to the branches that
    already exist.
  7. Make "for_each_ref()" always use the "canonical" refname.

    Linus Torvalds committed Jul 8, 2005
    It always uses a git-relative pathname, ie "refs/heads/master" instead of
    ".git/refs/heads/master" or whatever your GIT_DIR might be.
    
    This way when we send refs back-and-forth between repositories, there's
    never any question about GIT_DIR on either side.
  8. [PATCH] Use sq_quote() to properly quote the parameter to call shell.

    Junio C Hamano committed with Linus Torvalds Jul 8, 2005
    This tries to be more lenient to the users and stricter to the
    attackers by quoting the input properly for shell safety,
    instead of forbidding certain characters from the input.
    
    Things to note:
    
     - We do not quote "prog" parameter (which comes from --exec).
       The user should know what he is doing.  --exec='echo foo'
       will supply the first two parameters to the resulting
       command, while --exec="'echo foo'" will give the first
       parameter, a single string with a space inside.
    
     - We do not care too much about leaking the sq_quote() output
       just before running exec().
    
    Signed-off-by: Junio C Hamano <junkio@cox.net>
    Signed-off-by: Linus Torvalds <torvalds@osdl.org>
  9. [PATCH] Make sq_expand() available as sq_quote().

    Junio C Hamano committed with Linus Torvalds Jul 8, 2005
    A useful shell safety helper sq_expand() was hidden as a static
    function in diff.c.  Extract it out and make it available as
    sq_quote().
    
    Signed-off-by: Junio C Hamano <junkio@cox.net>
    Signed-off-by: Linus Torvalds <torvalds@osdl.org>
  10. Add "git-sh-setup-script" for common git shell script setup

    Linus Torvalds committed Jul 8, 2005
    It sets up the normal git environment variables and a few helper
    functions (currently just "die()"), and returns ok if it all looks like
    a git archive.  So use it something like
    
    	. git-sh-setup-script || die "Not a git archive"
    
    to make the rest of the git scripts more careful and readable.
  11. git-diff-*: support "-u" as a synonym for "-p"

    Linus Torvalds committed Jul 8, 2005
    I'm probably not the only one whose fingers have gotten hard-wired to
    use "-u" for "unified diff".
  12. [PATCH] git-format-patch: Prepare patches for e-mail submission.

    Junio C Hamano committed with Linus Torvalds Jul 5, 2005
    This is the script I use to prepare patches for e-mail submission.
    
    Signed-off-by: Junio C Hamano <junkio@cox.net>
    Signed-off-by: Linus Torvalds <torvalds@osdl.org>
  13. Mark more characters shell-safe.

    Linus Torvalds committed Jul 8, 2005
    I still worry about just quoting things when passing it off to "ssh" or
    "sh -c", so I'm being anal.  But _, ^ and , are certainly ok and while
    both ~ and @ can have speacial meaning to shell/ssh they are benign.
  14. git-fsck-cache: don't complain about lacking references when they are…

    Linus Torvalds committed Jul 8, 2005
    … all in packs.
    
    We used to not count them at all, which then made us complain that there
    were no refs.
Commits on Jul 7, 2005
  1. [PATCH] Typofix an error message in pack-check.c

    Junio C Hamano committed with Linus Torvalds Jul 7, 2005
    The current error message does not make any sense.
    
    Signed-off-by: Junio C Hamano <junkio@cox.net>
    Signed-off-by: Linus Torvalds <torvalds@osdl.org>
  2. [PATCH] Prevent t6000 series from dropping useless sed.script in t/

    Junio C Hamano committed with Linus Torvalds Jul 7, 2005
    The Makefile in the test suite directory considers any file
    matching t[0-9][0-9][0-9][0-9]-*.sh as the top-level test script
    to be executed.  Unfortunately this was not documented, and the
    common test library, t6000-lib.sh was named to match that
    pattern.  This caused t6000-lib.sh to be called from Makefile as
    the top-level program, causing it to leave t/sed.script file
    behind.  Rename it to t6000lib.sh to prevent this, and document
    the naming convention a bit more clearly.
    
    Signed-off-by: Junio C Hamano <junkio@cox.net>
    Signed-off-by: Linus Torvalds <torvalds@osdl.org>
  3. [PATCH] Short-circuit git-clone-pack while cloning locally (take 2).

    Junio C Hamano committed with Linus Torvalds Jul 6, 2005
    When we are cloning a repository on a local filesystem, it is
    faster to just create a hard linkfarm of .git/object hierarchy
    and copy the .git/refs files.  By default, the script uses the
    clone-pack method, but it can be told with the -l flag to do the
    hard linkfarm (falling back on recursive file copy) to replicate
    the .git/object hierarchy.
    
    Signed-off-by: Junio C Hamano <junkio@cox.net>
    Signed-off-by: Linus Torvalds <torvalds@osdl.org>