Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Branch: master

allow switch bootloader=>app / app=>bootloader via usb only, add supp…

…ort for KIOSK pin (PowerOn)
latest commit d201f88d2b
Thomas Kleffel authored
..
Failed to load latest commit information.
boot allow switch bootloader=>app / app=>bootloader via usb only, add supp…
host allow switch bootloader=>app / app=>bootloader via usb only, add supp…
Compiler.h add picflash
Flasher.c allow switch bootloader=>app / app=>bootloader via usb only, add supp…
Flasher.h add picflash
GenericTypeDefs.h add picflash
HardwareProfile.h add picflash
PICFLASH.lkr make picflash work with bootloader
PICFLASH.mcp make picflash work with bootloader
PICFLASH.mcw make picflash work with bootloader
XNAND.c fix SectorErase / cleanup
XNAND.h add picflash
XSPI.c allow switch bootloader=>app / app=>bootloader via usb only, add supp…
XSPI.h allow switch bootloader=>app / app=>bootloader via usb only, add supp…
c018i.o make picflash work with bootloader
main.c make picflash work with bootloader
readme.txt allow switch bootloader=>app / app=>bootloader via usb only, add supp…
usb.h add picflash
usb_ch9.h add picflash
usb_common.h add picflash
usb_config.h make picflash work with bootloader
usb_descriptors.c add picflash
usb_device.c change source to reflect pinmap in readme.txt
usb_device.h add picflash
usb_function_cdc.c add picflash
usb_hal.h add picflash
usb_hal_pic18.h add picflash

readme.txt

Signal       Mainboard     18F2455
----------------------------------
EJ           J2B1.5        B1 Pin 22 (use resistor)
XX           J2B1.6        B0 Pin 21 (use resistor)
SS           J1D2.2        B4 Pin 25 (use resistor)
SCK          J1D2.3        B3 Pin 24 (use resistor)
MOSI         J1D2.1        B6 Pin 27 (use resistor)
MISO         J1D2.4        B2 Pin 23 (NO RESISTOR)

and for remote power-on:

KIOSK        J2B1.11       B7 Pin 28 (use resistor)

You can power the PIC from either the USB or from the mainboard. In any
case, C2 (Pin 13) must be connected to +5V from the USB to allow proper sensing
of the USB state. 

Something went wrong with that request. Please try again.