C Assembly Shell
Fetching latest commit…
Cannot retrieve the latest commit at this time.
|Failed to load latest commit information.|
# # (C) Copyright 2004-2006 Texas Instruments # # Some cut/paste from U-Boot README # (C) Copyright 2000 - 2004 # Wolfgang Denk, DENX Software Engineering, firstname.lastname@example.org. # # See file CREDITS for list of people who contributed to this # project. # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as # published by the Free Software Foundation; either version 2 of # the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # Summary: ======== This directory contains the source code for X-Loader, an initial program loader for Embedded boards based on OMAP processors. X-Loader can be signed by Texas Instruments IFT and installed to Nand flash to achieve Nand booting. Status: ======= The support for Texas Instruments H3 board (OMAP1710) has been implemented and tested. (May 2004) The support for Texas Instruments H4 board (OMAP2420) has been implemented and tested. (Nov 2004) The support for Texas Instruments 2430SDP board (OMAP2430) has been implemented and tested. (Jul 2006) The support for Texas Instruments 3430SDP board (OMAP3430) has been implemented and tested. (Dec 2006) Support for other OMAP boards can be added. Directory Hierarchy: ==================== - board Board dependent files - cpu CPU specific files - drivers Commonly used device drivers - lib Libraries - cpu/arm926ejs Files specific to ARM 926 CPUs - cpu/arm1136 Files specific to ARM 1136 CPUs - cpu/omap3 Files specific to ARM CortexA8 CPU - board/omap1710h3 Files specific to OMAP 1710 H3 boards - board/omap2420h4 Files specific to OMAP 2420 H4 boards - board/omap2430sdp Files specific to OMAP 2430 2430sdp boards - board/omap3430sdp Files specific to OMAP 3420sdp boards Software Configuration: ======================= Configuration is usually done using C preprocessor defines. Configuration depends on the combination of board and CPU type; all such information is kept in a configuration file "include/configs/<board_name>.h". Example: For a H3 module, all configuration settings are in "include/configs/omap1710h3.h". For all supported boards there are ready-to-use default configurations available; just type "make <board_name>_config". Example: For a H3 module type: cd x-load make omap1710h3_config After a board has been configured, type "make" to build it supposing the needed cross tools are in your path. Image Format: ============= X-Loader expects OS boot loader (e.g. U-Boot) in Nand flash using JFFS2 style ECC. Prepare Booting Nand Flash: =========================== After you have built x-load.bin for your board, you need to do the followings to get it into Nand flash: 1. Use Texas Instruments IFT to sign x-load.bin. This results in a signed image called x-load.bin.ift. 2. Use Texas Instruments FlashPrep to generate a .out file using FlashWriterNand and specifying 0 as nand target address. 3. Use Texas instrumnets Code Composer Studio to run the .out file which flashes x-load.bin.ift to Nand flash. Next you need to get your OS boot loader to Nand at the address your X-Loader expects. For the H3 example, you can use U-Boot to flash U-Boot. You can't use FlashWriterNand because it uses ROM code ECC style. More Information ================ OMAP1710 NAND Booting Design Document has more information. Implemenation notes: ==================== H3, H4 support NAND flash booting 2430sdp & 3430sdp support OneNAND booting