Permalink
Browse files

v5.0i

  • Loading branch information...
gokhanmoral committed Oct 30, 2012
1 parent 09ba454 commit 4b33a7a8c6c31ddf93782a7f2d28199c7862e379
@@ -134,11 +134,11 @@ if [ ! -f $PROFILE_PATH/default.profile ];then
cp $DEFAULT_PROFILE $PROFILE_PATH/default.profile
chmod 777 $PROFILE_PATH/default.profile
fi
-if [ ! -f $PROFILE_PATH/battery.profile ];then
- cp $BATTERY_PROFILE $PROFILE_PATH/battery.profile
- chmod 777 $PROFILE_PATH/battery.profile
-fi
-if [ ! -f $PROFILE_PATH/performance.profile ];then
- cp $PERFORMANCE_PROFILE $PROFILE_PATH/performance.profile
- chmod 777 $PROFILE_PATH/performance.profile
-fi
+#if [ ! -f $PROFILE_PATH/battery.profile ];then
+# cp $BATTERY_PROFILE $PROFILE_PATH/battery.profile
+# chmod 777 $PROFILE_PATH/battery.profile
+#fi
+#if [ ! -f $PROFILE_PATH/performance.profile ];then
+# cp $PERFORMANCE_PROFILE $PROFILE_PATH/performance.profile
+# chmod 777 $PROFILE_PATH/performance.profile
+#fi
@@ -37,66 +37,63 @@
<settingsPane description=""
name="CPU Scaling Settings">
+ <spinner description="This will set the default CPU governor. Default CPU governor will only be set during early stages of booting (before init.d execution) and can be overriden by later scripts or apps." name="Default CPU Governor" action="generic /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor">
+ <spinnerItem name="pegasusq" value="pegasusq"/>
+ <spinnerItem name="lulzactiveq" value="lulzactiveq"/>
+ <spinnerItem name="hotplug" value="hotplug"/>
+ <spinnerItem name="ondemand" value="ondemand"/>
+ <spinnerItem name="conservative" value="conservative"/>
+ </spinner>
<seekBar description="Scaling maximum frequency (Samsung default: 1200000)"
- name="scaling_max_freq" action="generic /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq" unit=" kHz" min="100000" reversed="false" step="100000" max="1600000"/>
+ name="scaling_max_freq" action="generic /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq" unit=" kHz" min="800000" reversed="false" step="100000" max="1600000"/>
<seekBar description="Scaling minimum frequency (Samsung default: 200000)"
- name="scaling_min_freq" action="generic /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq" unit=" kHz" min="100000" reversed="false" step="100000" max="1600000"/>
+ name="scaling_min_freq" action="generic /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq" unit=" kHz" min="100000" reversed="false" step="100000" max="500000"/>
</settingsPane>
</settingsTab>
<settingsTab name="GPU">
<settingsPane description="GPU Frequency Settings. Defaults frequencies are 100, 133, 160, 200 and 267. Voltage defaults are 900mV, 950mV, 1000mV and 1050mV." name="GPUFreq">
- <spinner description="Select the level to be used to boost GPU frequency when you touch the screen." name="Mali Touch Boost Level" action="generic /sys/module/mali/parameters/mali_touch_boost_level">
- <spinnerItem name="Disabled" value="0"/>
- <spinnerItem name="Step2" value="1"/>
- <spinnerItem name="Step3" value="2"/>
- <spinnerItem name="Step4" value="3"/>
- </spinner>
+ <checkbox description="Enabling VPLL mode may be unstable on some devices so do not complain if your device crash or burn. If you do not use VPLL Mode some frequency steps will be unavailable." name="VPLL Mode" action="generic01 /sys/module/mali/parameters/mali_use_vpll" label="VPLL Mode"/>
<spinner description="Changes the first GPU frequency step" name="GPU Freq Step1" action="gpu-freq 1">
+ <spinnerItem name="267MHz" value="267"/>
+ <spinnerItem name="200MHz" value="200"/>
<spinnerItem name="160MHz" value="160"/>
- <spinnerItem name="133MHz" value="133"/>
- <spinnerItem name="100MHz" value="100"/>
+ <spinnerItem name="108MHz" value="108"/>
<spinnerItem name="66MHz" value="66"/>
- <spinnerItem name="40MHz" value="40"/>
+ <spinnerItem name="54MHz" value="54"/>
</spinner>
<spinner description="Changes the second GPU frequency step" name="GPU Freq Step2" action="gpu-freq 2">
+ <spinnerItem name="330MHz" value="330"/>
<spinnerItem name="267MHz" value="267"/>
<spinnerItem name="200MHz" value="200"/>
<spinnerItem name="160MHz" value="160"/>
- <spinnerItem name="133MHz" value="133"/>
- <spinnerItem name="100MHz" value="100"/>
+ <spinnerItem name="108MHz" value="108"/>
<spinnerItem name="66MHz" value="66"/>
- <spinnerItem name="40MHz" value="40"/>
</spinner>
<spinner description="Changes the third GPU frequency step" name="GPU Freq Step3" action="gpu-freq 3">
<spinnerItem name="400MHz" value="400"/>
+ <spinnerItem name="330MHz" value="330"/>
<spinnerItem name="267MHz" value="267"/>
<spinnerItem name="200MHz" value="200"/>
<spinnerItem name="160MHz" value="160"/>
- <spinnerItem name="133MHz" value="133"/>
- <spinnerItem name="100MHz" value="100"/>
- <spinnerItem name="66MHz" value="66"/>
- <spinnerItem name="40MHz" value="40"/>
+ <spinnerItem name="108MHz" value="108"/>
</spinner>
<spinner description="Changes the fourth GPU frequency step" name="GPU Freq Step4" action="gpu-freq 4">
+ <spinnerItem name="520MHz" value="520"/>
+ <spinnerItem name="440MHz" value="440"/>
<spinnerItem name="400MHz" value="400"/>
+ <spinnerItem name="330MHz" value="330"/>
<spinnerItem name="267MHz" value="267"/>
<spinnerItem name="200MHz" value="200"/>
<spinnerItem name="160MHz" value="160"/>
- <spinnerItem name="133MHz" value="133"/>
- <spinnerItem name="100MHz" value="100"/>
- <spinnerItem name="66MHz" value="66"/>
- <spinnerItem name="40MHz" value="40"/>
</spinner>
<spinner description="Changes the fifth GPU frequency step" name="GPU Freq Step5" action="gpu-freq 5">
+ <spinnerItem name="520MHz" value="520"/>
+ <spinnerItem name="440MHz" value="440"/>
<spinnerItem name="400MHz" value="400"/>
+ <spinnerItem name="330MHz" value="330"/>
<spinnerItem name="267MHz" value="267"/>
<spinnerItem name="200MHz" value="200"/>
- <spinnerItem name="160MHz" value="160"/>
- <spinnerItem name="133MHz" value="133"/>
- <spinnerItem name="100MHz" value="100"/>
- <spinnerItem name="66MHz" value="66"/>
- <spinnerItem name="40MHz" value="40"/>
</spinner>
</settingsPane>
@@ -162,6 +159,8 @@
<settingsPane description="Other Settings" name="Other Settings">
<seekBar description="User adjustable gamma shift."
name="Gamma Shift" action="generic /sys/class/lcd/panel/user_gamma_adjust" unit="" min="-50" reversed="false" step="5" max="50"/>
+ <checkbox description="Enable slide2wake feature. Enabling this feature may decrease your battery life." name="Slide2Wake" action="generic01 /sys/devices/virtual/sec/sec_touchscreen/tsp_slide2wake" label="Slide2Wake"/>
+ <checkbox description="mDNIe sharpness tweaks from hardcore. Requires reboot to be effective." name="mDNIe Sharpness Tweaks" action="generic /tmp/mdniemod" label="mDNIe Sharpness Tweaks"/>
<checkbox description="Enable inverting the screen colors by quickly pressing Home button 4 times" name="mDNIe Negative Toggle" action="generic01 /sys/module/gpio_keys/parameters/mdnie_shortcut_enabled" label="mDNIe Negative Toggle"/>
<seekBar description="FB earlysuspend delay to run CRT animation when you turn the screen off."
name="FB Earlysuspend Delay" action="generickmem fbearlysuspend_delay 0 int" unit=" ms" min="0" reversed="false" step="100" max="500"/>
@@ -1,13 +1,13 @@
GPUFREQ1=66
-GPUFREQ2=100
+GPUFREQ2=108
GPUFREQ3=160
-GPUFREQ4=200
-GPUFREQ5=267
+GPUFREQ4=267
+GPUFREQ5=330
GPUVOLT1=900
GPUVOLT2=900
GPUVOLT3=950
-GPUVOLT4=950
-GPUVOLT5=1000
+GPUVOLT4=1000
+GPUVOLT5=1100
GPUTHRESHOLD1UP=80
GPUTHRESHOLD2DOWN=60
GPUTHRESHOLD2UP=80
@@ -16,16 +16,16 @@ GPUTHRESHOLD3UP=85
GPUTHRESHOLD4DOWN=70
GPUTHRESHOLD4UP=90
GPUTHRESHOLD5DOWN=80
-min_bl=50
-min_gamma=1
+min_bl=30
+min_gamma=0
max_gamma=24
rate=100
enable_mask=3
chargecurrent=1
logger=on
max_cpu_lock=2
secondcore=hotplug
-scheduler=deadline
+scheduler=cfq
scaling_governor=pegasusq
load_l1=20
load_h0=30
@@ -36,8 +36,6 @@ install_root=on
mov_hysti=5
suspend_freq=500000
user_gamma_adjust=0
-user_cr=128
-user_cb=128
blnww=off
cpustepcount=16
notification_enabled=off
@@ -47,6 +45,7 @@ bln_effect=0
touchkey_brightness=3000
led_fadeout=on
led_on_touch=on
+tsp_slide2wake=off
cpu_undervolting=0
smooth_level0=4
scaling_max_freq=1200000
@@ -55,8 +54,10 @@ usb_mode=default
GENTLE_FAIR_SLEEPERS=on
default_stats=off
mdnie_shortcut_enabled=on
+mdniemod=off
cfs_tweaks=0
mali_touch_boost_level=0
+mali_use_vpll=off
soundgasm_hp=0
dyn_brightness=off
sound_volume1=0
View
@@ -1,190 +0,0 @@
-#!/sbin/busybox sh
-
-#
-# Sample touch gesture actions by Tungstwenty - forum.xda-developers.com
-# Modded by GM and dorimanx.
-
-(
-echo "
-# Gesture 1 - swipe 1 finger near the top and one near the bottom from left to right
-1:1:(0|150,0|150)
-1:1:(330|480,0|150)
-1:2:(0|150,650|800)
-1:2:(330|480,650|800)
-
-# Gesture 2 - swipe 3 fingers from near the top to near the bottom
-2:1:(0|480,0|200)2:1:(0|480,600|800)
-2:2:(0|480,0|200)2:2:(0|480,600|800)
-2:3:(0|480,0|200)2:3:(0|480,600|800)
-
-# Gesture 3 - draw a Z with one finger while another is pressed on the middle left
-3:1:(0|150,0|150)
-3:1:(330|480,0|150)
-3:1:(0|150,650|800)
-3:1:(330|480,650|800)
-
-3:2:(0|150,300|500)
-
-# Gesture 4 draw a heart starting at middle lower part of the screen
-4:1:(200|280,699|799)
-4:1:(0|150,300|500)
-4:1:(200|280,300|500)
-4:1:(330|480,300|500)
-4:1:(200|280,699|799)
-
-# Gesture 5 swipe 3 fingers from near the bottom to the top
-5:1:(0|480,600|800)5:1:(0|480,0|200)
-5:2:(0|480,600|800)5:2:(0|480,0|200)
-5:3:(0|480,600|800)5:3:(0|480,0|200)
-
-# Gesture 6 - one finger on bottom right while another goes from top-left to middle and back
-6:1:(0|240,0|320) 6:1:(180|300,340|460) 6:1:(0|240,0|320) # top-left, middle, top-left
-6:2:(530|800,960|1280) # 2nd finger on the bottom right
-
-# Gesture 7 - one finger on bottom left while another goes from top-right to middle and back
-7:1:(530|800,0|320) 7:1:(180|300,340|460) 7:1:(530|800,0|320) # top-right, middle, top-right
-7:2:(0|240,960|1280) # 2nd finger on the bottom left
-
-# Gesture 8 - 2 fingers start from the top-left and bottom-left corners and end in the middle right, like an arrow
-8:1:(0|240,0|320) 8:1:(300|800,300|500) # top-left to middle-right
-8:2:(0|240,960|1280) 8:2:(300|800,300|500) # bottom-left to middle-right
-
-# Gesture 9 - 1 finger draws an X starting at the top left
-9:1:(0|240,0|320) # top left
-9:1:(530|800,960|1280) # bottom right
-9:1:(530|800,0|320) # top right
-9:1:(0|240,960|1280) # bottom left
-
-# Gesture 10 - 1 finger from bottom-left, bottom-right, bottom-left, bottom-right
-10:1:(0|240,960|1280) # bottom left
-10:1:(530|800,960|1280) # bottom right
-10:1:(0|240,960|1280) # bottom left
-10:1:(530|800,960|1280) # bottom right
-
-" > /sys/devices/virtual/misc/touch_gestures/gesture_patterns
-)&
-
-# Detect ICS or JB - bluetooth calls are different
-case "`getprop ro.build.version.release`" in
- 4.1.* ) is_jb=1;;
- * ) is_jb=0;;
-esac
-
-(while [ 1 ];
-do
-
- GESTURE=`cat /sys/devices/virtual/misc/touch_gestures/wait_for_gesture`
-
- if [ "$GESTURE" -eq "1" ]; then
-
- mdnie_status=`cat /sys/class/mdnie/mdnie/negative`
- if [ "$mdnie_status" -eq "0" ]; then
- echo 1 > /sys/class/mdnie/mdnie/negative
- else
- echo 0 > /sys/class/mdnie/mdnie/negative
- fi;
-
- elif [ "$GESTURE" -eq "2" ]; then
-
- # Power down the screen.
- input keyevent 26
-
- elif [ "$GESTURE" -eq "3" ]; then
-
- # Start the extweaks
- am start -a android.intent.action.MAIN -n com.darekxan.extweaks.app/.ExTweaksActivity
-
- elif [ "$GESTURE" -eq "4" ]; then
-
- echo "if blank GESTURE dont remove me." > /dev/null 2>&1
-
- # Edit and uncomment the next line to automatically start a call to the target number
- # WARNING / BONUS: This will work even in the lockscreen with a PIN protection
- # When you ready to add some phone, remove the # before service call...
-
- #service call phone 2 s16 "your girl number"
-
- elif [ "$GESTURE" -eq "5" ]; then
-
- # Start Camera APP
- # for CM10
- launch_flags="--activity-exclude-from-recents --activity-reset-task-if-needed"
-
- result=`am start $launch_flags com.sec.android.app.camera/.Camera 2>&1 | grep Error`
- [ "$result" != "" ] && result=`am start $launch_flags com.android.camera/.Camera 2>&1 | grep Error`
- [ "$result" != "" ] && result=`am start $launch_flags com.android.gallery3d/com.android.camera.CameraLauncher 2>&1 | grep Error`
- [ "$result" != "" ] && result=`am start $launch_flags com.android.camera/.Camera 2>&1 | grep Error`
-
- elif [ "$GESTURE" == "6" ]; then
-
- # Toggle bluetooth on/off
- service call bluetooth 1 | grep "0 00000000" > /dev/null
- if [ "$?" -eq "0" ]; then
- service call bluetooth 3 > /dev/null
- else
- [ "$is_jb" -eq "1" ] && service call bluetooth 5 > /dev/null
- [ "$is_jb" -ne "1" ] && service call bluetooth 4 > /dev/null
- fi;
-
- elif [ "$GESTURE" == "7" ]; then
-
- # Toggle WiFi on/off
- service call wifi 14 | grep "0 00000001" > /dev/null
- if [ "$?" -eq "0" ]; then
- service call wifi 13 i32 1 > /dev/null
- else
- service call wifi 13 i32 0 > /dev/null
- fi;
-
- elif [ "$GESTURE" == "8" ]; then
-
- # Simulate key press - Play/Pause
-
- # 26 = Power
- # 3 = Home
- # 24/25 = Volume up/down
- # 85 = Media Play / pause
- # 86 = Media stop
- # 87/88 = Media next / previous
- # 164 = Volume mute / unmute
-
- input keyevent 85
-
- elif [ "$GESTURE" == "9" ]; then
-
- # Simulate key press - Volume mute / unmute
-
- # 26 = Power
- # 3 = Home
- # 24/25 = Volume up/down
- # 85 = Media Play / pause
- # 86 = Media stop
- # 87/88 = Media next / previous
- # 164 = Volume mute / unmute
- # 187 = Recent apps
-
- input keyevent 164
-
- elif [ "$GESTURE" == "10" ]; then
-
- # Simulate key press - Home
-
- # 26 = Power
- # 3 = Home
- # 24/25 = Volume up/down
- # 85 = Media Play / pause
- # 86 = Media stop
- # 87/88 = Media next / previous
- # 164 = Volume mute / unmute
- # 187 = Recent apps
-
- input keyevent 3
- fi;
-
- # Small vibration to provide feedback
- service call vibrator 2 i32 50 i32 0
-
- sleep 3
-
-done &) > /dev/null 2>&1;
-
View
Binary file not shown.
View
Binary file not shown.
Oops, something went wrong.

0 comments on commit 4b33a7a

Please sign in to comment.