Skip to content

Modules

thepudds edited this page Mar 13, 2019 · 279 revisions

Go 1.11 Modules

Go 1.11 includes preliminary support for versioned modules as proposed here. Modules are an experimental opt-in feature in Go 1.11, with the plan of incorporating feedback and finalizing the feature for Go 1.13. Even though some details may change, future releases will support modules defined using Go 1.11 or 1.12.

The initial prototype (vgo) was announced in February 2018. In July 2018, support for versioned modules landed in the main repository. Go 1.11 was released in August 2018.

Please provide feedback on modules via existing or new issues and via experience reports.

Table of Contents

The "Quick Start" and "New Concepts" sections are particularly important for someone who is starting to work with modules. The "How to..." sections cover more details on mechanics. The largest quantity of content on this page is in the FAQs answering more specific questions; it can be worthwhile to at least skim the FAQ one-liners listed here.

Quick Start

Example

The details are covered in the remainder of this page, but here is a simple example of creating a module from scratch.

Create a directory outside of your GOPATH:

$ mkdir -p /tmp/scratchpad/hello
$ cd /tmp/scratchpad/hello

Initialize a new module:

$ go mod init github.com/you/hello

go: creating new go.mod: module github.com/you/hello

Write your code:

$ cat <<EOF > hello.go
package main

import (
    "fmt"
    "rsc.io/quote"
)

func main() {
    fmt.Println(quote.Hello())
}
EOF

Build and run:

$ go build 
$ ./hello

Hello, world.

The go.mod file was updated to include explicit versions for your dependencies, where v1.5.2 here is a semver tag:

$ cat go.mod

module github.com/you/hello

require rsc.io/quote v1.5.2

Daily Workflow

Note there was no go get required in the example above.

Your typical day-to-day workflow can be:

  • Add import statements to your .go code as needed.
  • Standard commands like go build or go test will automatically add new dependencies as needed to satisfy imports (updating go.mod and downloading the new dependencies).
  • When needed, more specific versions of dependencies can be chosen with commands such as go get foo@v1.2.3, go get foo@master, go get foo@e3702bed2, or by editing go.mod directly.

A brief tour of other common functionality you might use:

  • go list -m all — View final versions that will be used in a build for all direct and indirect dependencies (details)
  • go list -u -m all — View available minor and patch upgrades for all direct and indirect dependencies (details)
  • go get -u or go get -u=patch — Update all direct and indirect dependencies to latest minor or patch upgrades (details)
  • go build ./... or go test ./... — Build or test all packages in the module when run from the module root directory (details)
  • go mod tidy — Prune any no-longer-needed dependencies from go.mod and add any dependencies needed for other combinations of OS, architecture, and build tags (details)
  • replace directive or gohack — Use a fork, local copy or exact version of a dependency (details)
  • go mod vendor — Optional step to create a vendor directory (details)

After reading the next four sections on "New Concepts", you will have enough information to get started with modules for most projects. It is also useful to review the Table of Contents above (including the FAQ one-liners there) to familiarize yourself with the list of more detailed topics.

New Concepts

These sections provide a high-level introduction to the main new concepts. For more details and rationale, please see this 40-minute introductory video by Russ Cox describing the philosophy behind the design, the official proposal document, or the more detailed initial vgo blog series.

Modules

A module is a collection of related Go packages that are versioned together as a single unit.

Modules record precise dependency requirements and create reproducible builds.

Most often, a version control repository contains exactly one module defined in the repository root. (Multiple modules are supported in a single repository, but typically that would result in more work on an on-going basis than a single module per repository).

Summarizing the relationship between repositories, modules, and packages:

  • A repository contains one or more Go modules.
  • Each module contains one or more Go packages.
  • Each package consists of one or more Go source files in a single directory.

Modules must be semantically versioned according to semver, usually in the form v(major).(minor).(patch), such as v0.1.0, v1.2.3, or v1.5.0-rc.1. The leading v is required. If using Git, tag released commits with their versions. Public and private module repositories and proxies are becoming available (see FAQ below).

go.mod

A module is defined by a tree of Go source files with a go.mod file in the tree's root directory. Module source code may be located outside of GOPATH. There are four directives: module, require, replace, exclude.

Here is an example go.mod file defining the module github.com/my/thing:

module github.com/my/thing

require (
    github.com/some/dependency v1.2.3
    github.com/another/dependency/v4 v4.0.0
)

A module declares its identity in its go.mod via the module directive, which provides the module path. The import paths for all packages in a module share the module path as a common prefix. The module path and the relative path from the go.mod to a package's directory together determine a package's import path.

For example, if you are creating a module for a repository github.com/my/repo that will contain two packages with import paths github.com/my/repo/foo and github.com/my/repo/bar, then the first line in your go.mod file typically would declare your module path as module github.com/my/repo, and the corresponding on-disk structure could be:

repo/
├── go.mod
├── bar
│   └── bar.go
└── foo
    └── foo.go

In Go source code, packages are imported using the full path including the module path. For example, if a module declared its identity in its go.mod as module example.com/my/module, a consumer could do:

import "example.com/my/module/mypkg"

This imports package mypkg from the module example.com/my/module.

exclude and replace directives only operate on the current (“main”) module. exclude and replace directives in modules other than the main module are ignored when building the main module. The replace and exclude statements therefore allow the main module complete control over its own build, without also being subject to complete control by dependencies. (See FAQ below for discussion of when to use a replace directive).

Version Selection

If you add a new import to your source code that is not yet covered by a require in go.mod, most go commands like 'go build' and 'go test' will automatically look up the proper module and add the highest version of that new direct dependency to your module's go.mod as a require directive. For example, if your new import corresponds to dependency M whose latest tagged release version is v1.2.3, your module's go.mod will end up with require M v1.2.3, which indicates module M is a dependency with allowed version >= v1.2.3 (and < v2, given v2 is considered incompatible with v1).

The minimal version selection algorithm is used to select the versions of all modules used in a build. For each module in a build, the version selected by minimal version selection is always the semantically highest of the versions explicitly listed by a require directive in the main module or one of its dependencies.

As an example, if your module depends on module A which has a require D v1.0.0, and your module also depends on module B which has a require D v1.1.1, then minimal version selection would choose v1.1.1 of D to include in the build (given it is the highest listed require version). This selection of v1.1.1 remains consistent even if some time later a v1.2.0 of D becomes available. This is an example of how the modules system provides 100% reproducible builds. When ready, the module author or user might choose to upgrade to the latest available version of D or choose an explicit version for D.

For a brief rationale and overview of the minimal version selection algorithm, see the "High Fidelity Builds" section of the official proposal, or see the more detailed vgo blog series.

To see a list of the selected module versions (including indirect dependencies), use go list -m all.

See also the "How to Upgrade and Downgrade Dependencies" section below and the "How are versions marked as incompatible?" FAQ below.

Semantic Import Versioning

For many years, the official Go FAQ has included this advice on package versioning:

"Packages intended for public use should try to maintain backwards compatibility as they evolve. The Go 1 compatibility guidelines are a good reference here: don't remove exported names, encourage tagged composite literals, and so on. If different functionality is required, add a new name instead of changing an old one. If a complete break is required, create a new package with a new import path."

The last sentence is especially important — if you break compatibility, you should change the import path of your package. With Go 1.11 modules, that advice is formalized into the import compatibility rule:

"If an old package and a new package have the same import path, the new package must be backwards compatible with the old package."

Recall semver requires a major version change when a v1 or higher package makes a backwards incompatible change. The result of following both the import compatibility rule and semver is called Semantic Import Versioning, where the major version is included in the import path — this ensures the import path changes any time the major version increments due to a break in compatibility.

As a result of Semantic Import Versioning, code opting in to Go modules must comply with these rules:

  • Follow semver (with tags such as v1.2.3).
  • If the module is version v2 or higher, the major version of the module must be included as a /vN at the end of the module paths used in go.mod files (e.g., module github.com/my/mod/v2, require github.com/my/mod/v2 v2.0.0) and in the package import path (e.g., import "github.com/my/mod/v2/mypkg").
  • If the module is version v0 or v1, do not include the major version in either the module path or the import path.

In general, packages with different import paths are different packages. For example, math/rand is a different package than crypto/rand. This is also true if different import paths are due to different major versions appearing in the import path. Thus example.com/my/mod/mypkg is a different package than example.com/my/mod/v2/mypkg, and both may be imported in a single build, which among other benefits helps with diamond dependency problems and also allows a v1 module to be implemented in terms of its v2 replacement or vice versa.

See the "Module compatibility and semantic versioning" section of the go command documentation for more details on Semantic Import Versioning, and see https://semver.org for more about semantic versioning.

This section so far has been focused on code that has opted in to modules and imports other modules. However, putting major versions in import paths for v2+ modules could create incompatibilities with older versions of Go, or with code that has not yet opted in to modules. To help with this, there are three important transitional special cases or exceptions to the behavior and rules described above. These transitional exceptions will become less important over time as more packages opt in to modules.

Three Transitional Exceptions

  1. gopkg.in

    Existing code that uses import paths starting with gopkg.in (such as gopkg.in/yaml.v1 and gopkg.in/yaml.v2) can continue to use those forms for their module paths and import paths even after opting in to modules.

  2. '+incompatible' when importing non-module v2+ packages

    A module can import a v2+ package that has not opted in to modules itself. A non-module v2+ package that has a valid v2+ semver tag will be recorded with an +incompatible suffix in the importing module's go.mod file. The +incompatible suffix indicates that even though the v2+ package has a valid v2+ semver tag such as v2.0.0, the v2+ package has not actively opted in to modules and hence that v2+ package is assumed to have not been created with an understanding of the implications of Semantic Import Versioning and how to use major versions in import paths. Therefore, when operating in module mode, the go tool will treat a non-module v2+ package as an (incompatible) extension of the v1 version series of the package and assume the package has no awareness of Semantic Import Versioning, and the +incompatible suffix is an indication that the go tool is doing so.

  3. "Minimal module compatibility" when module mode is not enabled

    To help with backwards compatibility, Go versions 1.9.7+, 1.10.3+ and 1.11 have been updated to make it easier for code built with those releases to be able to properly consume v2+ modules without requiring modification of pre-existing code. This behavior is called "minimal module compatibility", and it only takes effect when full module mode is disabled for the go tool, such as if such as you have set GO111MODULE=off in Go 1.11, or are using Go versions 1.9.7+ or 1.10.3+. When relying on this "minimal module compatibility" mechanism in Go 1.9.7+, 1.10.3+ and 1.11, a package that has not opted in to modules would not include the major version in the import path for any imported v2+ modules. In contrast, a package that has opted in to modules must include the major version in the import path to import any v2+ modules (in order to properly import the v2+ module when the go tool is operating in full module mode with full awareness of Semantic Import Versioning).

For the exact mechanics required to release a v2+ module, please see the "Releasing Modules (v2 or Higher)" section below.

How to Use Modules

How to Install and Activate Module Support

To use modules, two install options are:

Once installed, you can then activate module support in one of two ways:

  • Invoke the go command in a directory outside of the $GOPATH/src tree, with a valid go.mod file in the current directory or any parent of it and the environment variable GO111MODULE unset (or explicitly set to auto).
  • Invoke the go command with GO111MODULE=on environment variable set.

How to Define a Module

To create a go.mod for an existing project:

  1. Navigate to the root of the module's source tree outside of GOPATH:

    $ cd <project path outside $GOPATH/src>         # e.g., cd ~/projects/hello
    

    Note that outside of GOPATH, you do not need to set GO111MODULE to activate module mode.

    Alternatively, if you want to work in your GOPATH:

    $ export GO111MODULE=on                         # manually active module mode
    $ cd $GOPATH/src/<project path>                 # e.g., cd $GOPATH/src/you/hello
    
  2. Create the initial module definition and write it to the go.mod file:

    $ go mod init                  
    

    This step converts from any existing dep Gopkg.lock file or from any of the other nine total supported dependency formats, adding require statements to match the existing configuration.

    go mod init will often be able to use auxiliary data (such as VCS meta-data) to automatically determine the appropriate module path, but if go mod init states it can not automatically determine the module path, or if you need to otherwise override that path, you can supply the module path as an optional argument to go mod init, for example:

    $ go mod init github.com/my/repo
    

    Note that if your dependencies include v2+ modules, or if you are initializing a v2+ module, then after running go mod init you might also need to edit your go.mod and .go code to add /vN to import paths and module paths as described in the "Semantic Import Versioning" section above. This applies even if go mod init automatically converted your dependency information from dep or other dependency managers. (Because of this, after running go mod init, you typically should not run go mod tidy until you have successfully run go build ./... or similar, which is the sequence shown in this section).

  3. Build the module. When executed from the root directory of a module, the ./... pattern matches all the packages within the current module. go build will automatically add missing or unconverted dependencies as needed to satisfy imports for this particular build invocation:

    $ go build ./...
    
  4. Test the module as configured to ensure that it works with the selected versions:

    $ go test ./...
    
  5. (Optional) Run the tests for your module plus the tests for all direct and indirect dependencies to check for incompatibilities:

    $ go test all
    

Prior to tagging a release, see the "How to Prepare for a Release" section below.

For more information on all of these topics, the primary entry point to the official modules documentation is available on golang.org.

How to Upgrade and Downgrade Dependencies

Day-to-day upgrading and downgrading of dependencies should be done using 'go get', which will automatically update the go.mod file. Alternatively, you can edit go.mod directly.

In addition, go commands like 'go build', 'go test', or even 'go list' will automatically add new dependencies as needed to satisfy imports (updating go.mod and downloading the new dependencies).

To view available minor and patch upgrades for all direct and indirect dependencies, run go list -u -m all.

To upgrade to the latest version for all direct and indirect dependencies of the current module:

  • run go get -u to use the latest minor or patch releases
  • run go get -u=patch to use the latest patch releases

To upgrade or downgrade to a more specific version, 'go get' allows version selection to be overridden by adding an @version suffix or "module query" to the package argument, such as go get foo@v1.6.2, go get foo@e3702bed2, or go get foo@'<v1.6.2'.

go get foo updates to the latest version with a semver tag, or the the latest known commit if there are no semver tags (details). go get foo is equivalent to go get foo@latest — in other words, @latest is the default if no @ version is specified.

Note that a -u in go get -u foo and go get -u foo@latest also upgrades all the direct and indirect dependencies of foo. A common starting point is instead go get foo or go get foo@latest without a -u (and after things are working, consider go get -u=patch foo, go get -u foo, go get -u, or go get -u=patch).

Using a branch name such as go get foo@master is one way to obtain the latest commit regardless of whether or not it has a semver tag.

In general, module queries that do not resolve to a semver tag will be recorded as pseudo-versions in the go.mod file.

See the "Module-aware go get" and "Module queries" sections of the go command documentation for more information on the topics here.

Modules are capable of consuming packages that have not yet opted into modules, including recording any available semver tags in go.mod and using those semver tags to upgrade or downgrade. Modules can also consume packages that do not yet have any proper semver tags (in which case they will be recorded using pseudo-versions in go.mod).

After upgrading or downgrading any dependencies, you may then want to run the tests again for all packages in your build (including direct and indirect dependencies) to check for incompatibilities:

$ go test all

How to Prepare for a Release

Releasing Modules (All Versions)

Best practices for creating a release of a module are expected to emerge as part of the initial modules experiment. Many of these might end up being automated by a future 'go release' tool.

Some current suggested best practices to consider prior to tagging a release:

  • Run go mod tidy to possibly prune any extraneous requirements (as described here) and also ensure your current go.mod reflects all possible build tags/OS/architecture combinations (as described here).

    • In contrast, other commands like go build and go test will not remove dependencies from go.mod that are no longer required and only update go.mod based on the current build invocation's tags/OS/architecture.
  • Run go test all to test your module (including running the tests for your direct and indirect dependencies) as a way of validating that the currently selected packages versions are compatible.

    • The number of possible version combinations is exponential in the number of modules, so in general you cannot expect your dependencies to have tested against all possible combinations of their dependencies.
    • As part of the modules work, go test all has been re-defined to be more useful to include all the packages in the current module, plus all the packages they depend on through a sequence of one or more imports, while excluding packages that don't matter in the current module.
  • Ensure your go.sum file is committed along with your go.mod file. See FAQ below for more details and rationale.

Your new module release becomes available to consumers once you push the new release tags.

Releasing Modules (v2 or Higher)

If you are releasing a v2 or higher module, please first review the discussion in the "Semantic Import Versioning" section above, which includes why major versions are included in the module path and import path for v2+ modules, as well as how Go versions 1.9.7+ and 1.10.3+ have been updated to simplify that transition.

Note that if you are adopting modules for the first time for a pre-existing repository or set of packages that have already been tagged v2.0.0 or higher before adopting modules, then the recommended best practice is to increment the major version when first adopting modules. For example, if you are the author of foo, and the latest tag for the foo repository is v2.2.2, and foo has not yet adopted modules, then the best practice would be to use v3.0.0 for the first release of foo to adopt modules (and hence the first release of foo to contain a go.mod file). Incrementing the major version in this case provides greater clarity to consumers of foo, allows for additional non-module patches or minor releases on the v2 series of foo if needed, and provides a strong signal for a module-based consumer of foo that different major versions result if you do import "foo" and a corresponding require foo v2.2.2+incompatible, vs. import "foo/v3" and a corresponding require foo/v3 v3.0.0. (Note that this advice regarding incrementing the major version when first adopting modules does not apply to pre-existing repos or packages whose latest versions are v0.x.x or v1.x.x).

There are two alternative mechanisms to release a v2 or higher module. Note that with both techniques, the new module release becomes available to consumers when the module author pushes the new tags. Using the example of creating a v3.0.0 release, the two options are:

  1. Major branch: Update the go.mod file to include a /v3 at the end of the module path in the module directive (e.g., module github.com/my/module/v3). Update import statements within the module to also use /v3 (e.g., import "github.com/my/module/v3/mypkg"). Tag the release with v3.0.0.

    • Go versions 1.9.7+, 1.10.3+, and 1.11 are able to properly consume and build a v2+ module created using this approach without requiring updates to consumer code that has not yet opted in to modules (as described in the the "Semantic Import Versioning" section above).
    • A community tool github.com/marwan-at-work/mod helps automate this procedure. See the repository or the community tooling FAQ below for an overview.
    • To avoid confusion with this approach, consider putting the v3.*.* commits for the module on a separate v3 branch.
    • Note: creating a new branch is not required. If instead you have been previously releasing on master and would prefer to tag v3.0.0 on master, that is a viable option. (However, be aware that introducing an incompatible API change in master can cause issues for non-modules users who issue a go get -u given the go tool is not aware of semver prior to Go 1.11 or when module mode is not enabled in Go 1.11+).
  2. Major subdirectory: Create a new v3 subdirectory (e.g., my/module/v3) and place a new go.mod file in that subdirectory. The module path must end with /v3. Copy or move the code into the v3 subdirectory. Update import statements within the module to also use /v3 (e.g., import "github.com/my/module/v3/mypkg"). Tag the release with v3.0.0.

    • This provides greater backwards compatibility. In particular, Go versions older than 1.9.7 and 1.10.3 are also able to properly consume and build a v2+ module created using this approach.
    • A more sophisticated approach here could exploit type aliases (introduced in Go 1.9) and forwarding shims between major versions residing in different subdirectories. This can provide additional compatibility and allow one major version to be implemented in terms of another major version, but would entail more work for a module author. An in-progress tool to automate this is goforward. Please see here for more details and rationale, along with a functioning initial version of goforward.

See https://research.swtch.com/vgo-module for a more in-depth discussion of these alternatives.

Migrating to Modules

This section attempts to briefly enumerate the major decisions to be made when migrating to modules as well as list other migration-related topics. References are generally provided to other sections for more details.

This material is primarily based on best practices that have emerged from the community as part of the modules experiment; this is therefore a work-in-progress section that will improve over time as the community gains more experience.

Summary:

  • The modules system is designed to allow different packages in the overall Go ecosystem to opt in at different rates.
  • Packages that are already on version v2 or higher have more migration considerations, primarily due to the implications of Semantic Import versioning.
  • New packages and packages on v0 or v1 have substantially fewer considerations when adopting modules.
  • Modules defined with Go 1.11 can be used by older Go versions (although the exact Go versions depends on the strategy used by the main module and its dependencies, as outlined below).

Migration topics:

Automatic Migration from Prior Dependency Managers

  • go mod init automatically translates the required information from dep, glide, govendor, godep and 5 other pre-existing dependency managers into a go.mod file that produces the equivalent build.
  • If you are creating a v2+ module, be sure your module directive in the converted go.mod includes the appropriate /vN (e.g., module foo/v3).
  • Note that if you are importing v2+ modules, you might need to do some manual adjustments after an initial conversion in order to add /vN to the require statements that go mod init generates after translating from a prior dependency manager. See the "How to Define a Module" section above for more details.
  • In addition, go mod init will not edit your .go code to add any required /vN to import statements. See the "Semantic Import versioning" and "Releasing Modules (v2 or Higher)" sections above for the required steps, including some options around community tools to automate the conversion.

Providing Dependency Information to Older Versions of Go

  • Older versions of Go understand how to consume a vendor directory created by go mod vendor. Therefore, vendoring is one way for a module to provide dependencies to older versions of Go that do not fully understand modules. See the vendoring FAQ and the go command documentation for more details.

Updating Pre-Existing Install Instructions

  • Pre-modules, it is common for install instructions to include go get -u foo. If you are publishing a module foo, consider dropping the -u in instructions for modules-based consumers.
    • -u asks the go tool to upgrade all the direct and indirect dependencies of foo.
    • A module consumer might choose to run go get -u foo later, but there are more benefits of "High Fidelity Builds" if -u is not part of the initial install instructions. See "How to Upgrade and Downgrade Dependencies" for more details.
    • go get -u foo does still work, and can still be a valid choice for install instructions.
  • In addition, go get foo is not strictly needed for a module-based consumer.
    • Simply adding an import statement import "foo" is sufficient. (Subsequent commands like go build or go test will automatically download foo and update go.mod as needed).
  • Module-based consumers will not use a vendor directory by default.
    • When module mode is enabled in the go tool, vendor is not strictly required when consuming a module (given the information contained in go.mod and the cryptographic checksums in go.sum), but some pre-existing install instructions assume the go tool will use vendor by default. See the vendoring FAQ for more details.
  • Install instructions that include go get foo/... might have issues in some cases (see discussion in #27215).

Incrementing the Major Version When First Adopting Modules with v2+ Packages

  • If you have packages that have already been tagged v2.0.0 or higher before adopting modules, then the recommended best practice is to increment the major version when first adopting modules. For example, if you are on v2.0.1 and have not yet adopted modules, then you would use v3.0.0 for the first release that adopts modules. See the "Releasing Modules (v2 or Higher)" section above for more details.

v2+ Modules Allow Multiple Major Versions Within a Single Build

  • If a module is on v2 or higher, an implication is that multiple major versions can be in a single build (e.g., foo and foo/v3 might end up in a single build).
    • This flows naturally from the rule that "packages with different import paths are different packages".
    • When this happens, there will be multiple copies of package-level state (e.g., package-level state for foo and package-level state for foo/v3) as well as each major version will run its own init function.
    • This approach helps with multiple aspects of the modules system, including helping with diamond dependency problems, gradual migration to new versions within large code bases, and allowing a major version to be implemented as a shim around a different major version.
  • See the "Avoiding Singleton Problems" section of https://research.swtch.com/vgo-import or #27514 for some related discussion.

Modules Consuming Non-Module Code

  • Modules are capable of consuming packages that have not yet opted into modules, with the appropriate package version information recorded in the importing module's go.mod. Modules can consume packages that do not yet have any proper semver tags. See FAQ below for more details.
  • Modules can also import a v2+ package that has not opted into modules. It will be recorded with an +incompatible suffix if the imported v2+ package has valid semver tags. See FAQ below for more details.

Non-Module Code Consuming Modules

  • Non-module code consuming v0 and v1 modules:

    • Code that has not yet opted in to modules can consume and build v0 and v1 modules (without any requirement related to the Go version used).
  • Non-module code consuming v2+ modules:

    • Go versions 1.9.7+, 1.10.3+ and 1.11 have been updated so that code built with those releases can properly consume v2+ modules without requiring modification of pre-existing code as described in the "Semantic Import versioning" and "Releasing Modules (v2 or Higher)" sections above.

    • Go versions prior to 1.9.7 and 1.10.3 can consume v2+ modules if the v2+ module was created following the "Major subdirectory" approach outlined in the "Releasing Modules (v2 or Higher)" section.

Strategies for Authors of Pre-Existing v2+ Packages

For authors of pre-existing v2+ packages considering opting in to modules, one way to summarize the alternative approaches is as a choice between three top-level strategies . Each choice then has follow-on decisions and variations (as outlined above). These alternative top-level strategies are:

  1. Require clients to use Go versions 1.9.7+, 1.10.3+, or 1.11+.

    The approach uses the "Major Branch" approach and relies on the "minimal module awareness" that was backported to 1.9.7 and 1.10.3. See the "Semantic Import versioning" and "Releasing Modules (v2 or Higher)" sections above for more details.

  2. Allow clients to use even older Go versions like Go 1.8.

    This approach uses the "Major Subdirectory" approach and involves creating a subdirectory such as /v2 or /v3. See the "Semantic Import versioning" and "Releasing Modules (v2 or Higher)" sections above for more details.

  3. Wait on opting in to modules.

    In this strategy, things continue to work with client code that has opted in to modules as well as with client code that has not opted in to modules. As time goes by, Go versions 1.9.7+, 1.10.3+, and 1.11+ will be out for an increasingly longer time period, and at some point in the future, it becomes more natural or client-friendly to require Go versions 1.9.7+/1.10.3+/1.11+, and at that point in time, you can implement strategy 1 above (requiring Go versions 1.9.7+, 1.10.3+, or 1.11+) or even strategy 2 above (though if you are ultimately going to go with strategy 2 above in order to support older Go versions like 1.8, then that is something you can do now).

Additional Resources

Documentation and Proposal

  • Official documentation:
    • Latest HTML documentation for modules on golang.org
    • Run go help modules for more about modules. (This is the main entry point for modules topics via go help)
    • Run go help mod for more about the go mod command.
    • Run go help module-get for more about the behavior of go get when in module-aware mode.
    • Run go help goproxy for more about the module proxy, including a pure file-based option via a file:/// URL.
  • The initial "Go & Versioning" series of blog posts on vgo by Russ Cox (first posted February 20, 2018)
  • Official golang.org blog post introducing the proposal (March 26, 2018)
    • This provides a more succinct overview of the proposal than the full vgo blog series, along with some of the history and process behind the proposal
  • Official Versioned Go Modules Proposal (last updated March 20, 2018)

Introductory Material

Additional Material

Changes Since the Initial Vgo Proposal

As part of the proposal, prototype, and beta processes, there have been over 400 issues created by the overall community. Please continue to supply feedback.

Here is a partial list of some of the larger changes and improvements, almost all of which were primarily based on feedback from the community:

  • Top-level vendor support was retained rather than vgo-based builds ignoring vendor directories entirely (discussion, CL)
  • Backported minimal module-awareness to allow older Go versions 1.9.7+ and 1.10.3+ to more easily consume modules for v2+ projects (discussion, CL)
  • Allowed vgo to use v2+ tags by default for pre-existing packages did not yet have a go.mod (recent update in related behavior described here)
  • Added support via command go get -u=patch to update all transitive dependencies to the latest available patch-level versions on the same minor version (discussion, documentation)
  • Additional control via environmental variables (e.g., GOFLAGS in #26585, CL)
  • Finer grain control on whether or not go.mod is allowed to be updated, how vendor directory is used, and whether or not network access is allowed (e.g., -mod=readonly, -mod=vendor, GOPROXY=off; related CL for recent change)
  • Added more flexible replace directives (CL)
  • Added additional ways to interrogate modules (for human consumption, as well as for better editor / IDE integration)
  • The UX of the go CLI has continued to be refined based on experiences so far (e.g., #26581, CL)
  • Additional support for warming caches for use cases such as CI or docker builds via go mod download (#26610)
  • Most likely: better support for installing specific versions of programs to GOBIN (#24250)

GitHub Issues

FAQs

How are versions marked as incompatible?

The require directive allows any module to declare that it should be built with version >= x.y.z of a dependency D (which may be specified due to incompatibilities with version < x.y.z of module D). Empirical data suggests this is the dominant form of constraints used in dep and cargo. In addition, the top-level module in the build can exclude specific versions of dependencies or replace other modules with different code. See the full proposal for more details and rationale.

One of the key goals of the versioned modules proposal is to add a common vocabulary and semantics around versions of Go code for both tools and developers. This lays a foundation for future capabilities to declare additional forms of incompatibilities, such as possibly:

  • declaring deprecated versions as described in the initial vgo blog series
  • declaring pair-wise incompatibility between modules in an external system as discussed for example here during the proposal process
  • declaring pair-wise incompatible versions or insecure versions of a module after a release has been published. See for example the on-going discussion in #24031 and #26829

When do I get old behavior vs. new module-based behavior?

In general, modules are opt-in for Go 1.11, so by design old behavior is preserved by default.

Summarizing when you get the old 1.10 status quo behavior vs. the new opt-in modules-based behavior:

  • Inside GOPATH — defaults to old 1.10 behavior (ignoring modules)
  • Outside GOPATH while inside a file tree with a go.mod — defaults to modules behavior
  • GO111MODULE environment variable:
    • unset or auto — default behavior above
    • on — force module support on regardless of directory location
    • off — force module support off regardless of directory location

Can two modules depend on each other (cyclical import)?

Yes. Two packages however may not depend on each other (this is a build constraint).

Can a module depend on a different version of itself?

A module can depend on a different major version of itself: by-and-large, this is comparable to depending on a different module.

Why does installing a tool via go get fail with error cannot find main module?

This occurs when you have set GO111MODULE=on, but are not inside of a file tree with a go.mod when you run go get.

The simplest solution is to leave GO111MODULE unset (or equivalently explicitly set to GO111MODULE=auto), which avoids this error.

Recall one of the primary reason modules exist is to record precise dependency information. This dependency information is written to your current go.mod. If you are not inside of a file tree with a go.mod but you have told the go get command to operate in module mode by setting GO111MODULE=on, then running go get will result in the error cannot find main module because there is no go.mod available to record dependency information.

Solution alternatives include:

  1. Leave GO111MODULE unset (the default, or explicitly set GO111MODULE=auto), which results in friendlier behavior. This will give you Go 1.10 behavior when you are outside of a module and hence will avoid go get reporting cannot find main module.

  2. Leave GO111MODULE=on, but as needed disable modules temporarily and enable Go 1.10 behavior during go get, such as via GO111MODULE=off go get example.com/cmd. This can be turned into a simple script or shell alias such as alias oldget='GO111MODULE=off go get'

  3. Create a temporary go.mod file that is then discarded. This has been automated by a simple shell script by @rogpeppe. This script allows version information to optionally be supplied via vgoget example.com/cmd[@version]. (This can be a solution for avoiding the error cannot use path@version syntax in GOPATH mode).

  4. gobin is a module-aware command to install and run main packages. By default, gobin installs/runs main packages without first needing to manually create a module, but with the -m flag it can be told to use an existing module to resolve dependenci es. Please see the gobin README and FAQ for details and additional use cases.

  5. Create a go.mod you use to track your globally installed tools, such as in ~/global-tools/go.mod, and cd to that directory prior to running go get or go install for any globally installed tools.

  6. Create a go.mod for each tool in separate directories, such as ~/tools/gorename/go.mod and ~/tools/goimports/go.mod, and cd to that appropriate directory prior to running go get or go install for the tool.

This current limitation will be resolved. However, the primary issue is that modules are currently opt-in, and a full solution will likely wait until GO111MODULE=on becomes the default behavior. See #24250 for more discussion, including this comment:

This clearly must work eventually. The thing I'm not sure about is exactly what this does as far as the version is concerned: does it create a temporary module root and go.mod, do the install, and then throw it away? Probably. But I'm not completely sure, and for now I didn't want to confuse people by making vgo do things outside go.mod trees. Certainly the eventual go command integration has to support this.

This FAQ has been discussing tracking globally installed tools.

If instead you want to track the tools required by a specific module, see the next FAQ.

How can I track tool dependencies for a module?

If you:

  • want to use a go-based tool (e.g. stringer) while working on a module, and
  • want to ensure that everyone is using the same version of that tool while tracking the tool's version in your module's go.mod file

then one currently recommended approach is to add a tools.go file to your module that includes import statements for the tools of interest (such as import _ "golang.org/x/tools/cmd/stringer"), along with a // +build tools build constraint. The import statements allow the go command to precisely record the version information for your tools in your module's go.mod, while the // +build tools build constraint prevents your normal builds from actually importing your tools.

For a concrete example of how to do this, please see this "Go Modules by Example" walkthrough.

A discussion of the approach along with an earlier concrete example of how to do this is in this comment in #25922.

The brief rationale (also from #25922):

I think the tools.go file is in fact the best practice for tool dependencies, certainly for Go 1.11.

I like it because it does not introduce new mechanisms.

It simply reuses existing ones.

What is the status of module support in IDEs, editors and standard tools like goimports, gorename, etc?

Support for modules is starting to land in editors and IDEs.

For example:

  • GoLand: currently has full support for modules outside and inside GOPATH, including completion, syntax analysis, refactoring, navigation as described here.
  • VS Code: work is in progress and looking for contributors to help. Tracking issue is #1532. An initial beta is described in the VS Code module status wiki page.
  • Atom with go-plus: tracking issue is #761.
  • vim with vim-go: initial support for syntax highlighting and formatting go.mod has landed. Broader support tracked in #1906.
  • emacs with go-mode.el: tracking issue in #237.

The status of other tools such as goimports, guru, gorename and similar tools is being tracked in an umbrella issue #24661. Please see that umbrella issue for latest status.

Some tracking issues for particular tools includes:

  • gocode: tracking issue in mdempsky/gocode/#46. Note that nsf/gocode is recommending people migrate off of nsf/gocode to mdempsky/gocode.
  • go-tools (tools by dominikh such as staticcheck, megacheck, gosimple): sample tracking issue dominikh/go-tools#328.

In general, even if your editor, IDE or other tools have not yet been made module aware, much of their functionality should work with modules if you are using modules inside GOPATH and do go mod vendor (because then the proper dependencies should be picked up via GOPATH).

The full fix is to move programs that load packages off of go/build and onto golang.org/x/tools/go/packages, which understands how to locate packages in a module-aware manner. This will likely eventually become go/packages.

FAQs — Additional Control

What community tooling exists for working with modules?

The community is starting to build tooling on top of modules. For example:

  • github.com/rogpeppe/gohack
    • A new community tool to automate and greatly simplify replace and multi-module workflows, including allowing you to easily modify one of your dependencies
    • For example, gohack example.com/some/dependency automatically clones the appropriate repository and adds the necessary replace directives to your go.mod
    • Remove all gohack replace statements with gohack undo
    • The project is continuing to expand to make other module-related workflows easier
  • github.com/marwan-at-work/mod
    • Command line tool to automatically upgrade/downgrade major versions for modules
    • Automatically adjusts go.mod files and related import statements in go source code
    • Helps with upgrades, or when first opting in to modules with a v2+ package
  • github.com/goware/modvendor
    • Helps copy additional files into the vendor/ folder, such as shell scripts, .cpp files, .proto files, etc.

When should I use the replace directive?

  • As described in the 'go.mod' concepts section above, replace directives provide additional control in the top-level go.mod for what is actually used to satisfy a dependency found in the Go source or go.mod files, while replace directives in modules other than the main module are ignored when building the main module.
  • The replace directive allows you to supply another import path that might be another module located in VCS (GitHub or elsewhere), or on your local filesystem with a relative or absolute file path. The new import path from the replace directive is used without needing to update the import paths in the actual source code.
  • One sample use case is if you need to fix or investigate something in a dependency, you can have a local fork and add the something like the following in your top-level go.mod:
    • replace example.com/original/import/path => /your/forked/import/path
  • replace also allows the top-level module control over the exact version used for a dependency, such as:
    • replace example.com/some/dependency => example.com/some/dependency v1.2.3
  • replace also can be used to inform the go tooling of the relative or absolute on-disk location of modules in a multi-module project, such as:
    • replace example.com/project/foo => ../foo
  • In general, you have the option of specifying a version to the left of the => in a replace directive, but typically it is less sensitive to change if you omit that (e.g., as done in all of the replace examples above).
  • Note: for direct dependencies, a require directive is needed even when doing a replace. For example, if foo is a direct dependency, you cannot do replace foo => ../foo without a corresponding require for foo. (If you are not sure what version to use in the require directive, you can often use v0.0.0 such as require foo v0.0.0; see #26241).
  • You can confirm you are getting your expected versions by running go list -m all, which shows you the actual final versions that will be used in your build including taking into account replace statements.
  • See the 'go mod edit' documentation for more details.
  • github.com/rogpeppe/gohack makes these types of workflows much easier, especially if your goal is to have mutable checkouts of dependencies of a module. See the repository or the immediately prior FAQ for an overview.
  • See the next FAQ for the details of using replace to work entirely outside of VCS.

Can I work entirely outside of VCS on my local filesystem?

Yes. VCS is not required.

This is very simple if you have a single module you want to edit at a time outside of VCS (and you either have only one module in total, or if the other modules reside in VCS). In this case, you can place the file tree containing the single go.mod in a convenient location. Your go build, go test and similar commands will work even if your single module is outside of VCS (without requiring any use of replace in your go.mod).

If you want to have multiple inter-related modules on your local disk that you want to edit at the same time, then replace directives are one approach. Here is a sample go.mod that uses a replace with a relative path to point the hello module at the on-disk location of the goodbye module (without relying on any VCS):

module example.com/me/hello

require (
  example.com/me/goodbye v0.0.0
)

replace example.com/me/goodbye => ../goodbye

As shown in this example, if outside of VCS you can use v0.0.0 as the version in the require directive. Note that as mentioned in the prior FAQ, the require directive is needed here. (replace example.com/me/goodbye => ../goodbye does not yet work without a corresponding require example.com/me/goodbye v0.0.0; this might change in the future with #26241).

A small runnable example is shown in this thread.

How do I use vendoring with modules? Is vendoring going away?

The initial series of vgo blog posts did propose dropping vendoring entirely, but feedback from the community resulted in retaining support for vendoring.

In brief, to use vendoring with modules:

  • go mod vendor resets the main module's vendor directory to include all packages needed to build and test all of the module's packages based on the state of the go.mod files and Go source code.
  • By default, go commands like go build ignore the vendor directory when in module mode.
  • The -mod=vendor flag (e.g., go build -mod=vendor) instructs the go commands to use the main module's top-level vendor directory to satisfy dependencies. The go commands in this mode therefore ignore the dependency descriptions in go.mod and assume that the vendor directory holds the correct copies of dependencies. Note that only the main module's top-level vendor directory is used; vendor directories in other locations are still ignored.
  • Some people will want to routinely opt-in to vendoring by setting a GOFLAGS=-mod=vendor environment variable.

Older versions of Go such as 1.10 understand how to consume a vendor directory created by go mod vendor, so vendoring is one way to provide dependencies to older versions of Go that do not fully understand modules.

If you are considering using vendoring, it is worthwhile to read the "Modules and vendoring" and "Make vendored copy of dependencies" sections of the tip documentation.

Are there "always on" module repositories and enterprise proxies?

Publicly hosted "always on" immutable module repositories and optional privately hosted proxies and repositories are becoming available.

For example:

  • Project Athens: Open source project in the works and looking for contributors.
  • JFrog Artifactory: Commercial offering. Support for Go 1.11 modules started with release 5.11 as described here and here. From Artifactory version 6.2.0, please use JFrog CLI 1.20.2 and above.
  • THUMBAI - Open source project - Go Mod Proxy server and Go Vanity Import Path server

Note that you are not required to run a proxy. Rather, the go tooling in 1.11 has added optional proxy support via GOPROXY to enable more enterprise use cases (such as greater control), and also to better handle situations such as "GitHub is down" or people deleting GitHub repositories.

Can I control when go.mod gets updated and when the go tools use the network to satisfy dependencies?

By default, a command like go build will reach out to the network as needed to satisfy imports.

Some teams will want to disallow the go tooling from touching the network at certain points, or will want greater control regarding when the go tooling updates go.mod, how dependencies are obtained, and how vendoring is used.

The go tooling provides a fair amount of flexibility to adjust or disable these default behaviors, including via -mod=readonly, -mod=vendor, GOFLAGS, GOPROXY=off, GOPROXY=file:///filesystem/path, go mod vendor, and go mod download.

The details on these options are spread throughout the official documentation. One community attempt at a consolidated overview of knobs related to these behaviors is here, which includes links to the official documentation for more information.

How do I use modules with CI systems such as Travis or CircleCI?

The simplest approach is likely just setting the environment variable GO111MODULE=on, which should work with most CI systems.

However, it can be valuable to run tests in CI on Go 1.11 with modules enabled as well as disabled, given some of your users will not have yet opted in to modules themselves. Vendoring is also a topic to consider.

The following two blog posts cover these topics more concretely:

FAQs — go.mod and go.sum

Why does 'go mod tidy' record indirect and test dependencies in my 'go.mod'?

The modules system records precise dependency requirements in your go.mod. (For more details, see the go.mod concepts section above or the go.mod tip documentation).

go mod tidy updates your current go.mod to include the dependencies needed for tests in your module — if a test fails, we must know which dependencies were used in order to reproduce the failure.

go mod tidy also ensures your current go.mod reflects the dependency requirements for all possible combinations of OS, architecture, and build tags (as described here). In contrast, other commands like go build and go test only update go.mod to provide the packages imported by the requested packages under the current GOOS, GOARCH, and build tags (which is one reason go mod tidy might add requirements that were not added by go build or similar).

If a dependency of your module does not itself have a go.mod (e.g., because the dependency has not yet opted in to modules itself), or if its go.mod file is missing one or more of its dependencies (e.g., because the module author did not run go mod tidy), then the missing transitive dependencies will be added to your module's requirements, along with an // indirect comment to indicate that the dependency is not from a direct import within your module.

Note that this also means that any missing test dependencies from your direct or indirect dependencies will also be recorded in your go.mod. (An example of when this is important: go test all runs the tests of all direct and indirect dependencies of your module, which is one way to validate that your current combination of versions work together. If a test fails in one of your dependencies when you run go test all, it is important to have a complete set of test dependency information recorded so that you have reproducible go test all behavior).

Another reason you might have // indirect dependencies in your go.mod file is if you have upgraded (or downgraded) one of your indirect dependencies beyond what is required by your direct dependencies, such as if you ran go get -u or go get foo@1.2.3. The go tooling needs a place to record those new versions, and it does so in your go.mod file (and it does not reach down into your dependencies to modify their go.mod files).

In general, the behaviors described above are part of how modules provide 100% reproducible builds and tests by recording precise dependency information.

If you are curious as to why a particular module is showing up in your go.mod, you can run go mod why -m <module> to answer that question. Other useful tools for inspecting requirements and versions include go mod graph and go list -m all.

Is 'go.sum' a lock file? Why does 'go.sum' include information for module versions I am no longer using?

No, go.sum is not a lock file. The go.mod files in a build provide enough information for 100% reproducible builds.

For validation purposes, go.sum contains the expected cryptographic checksums of the content of specific module versions. See the FAQ below for more details on go.sum (including why you typically should check in go.sum) as well as the "Module downloading and verification" section in the tip documentation.

In part because go.sum is not a lock file, it retains cryptographic checksums for module versions even after you stop using a module or particular module version. This allows validation of the checksums if you later resume using something, which provides additional safety.

In addition, your module's go.sum records checksums for all direct and indirect dependencies used in a build (and hence your go.sum will frequently have more modules listed than your go.mod).

Should I commit my 'go.sum' file as well as my 'go.mod' file?

Typically your module's go.sum file should be committed along with your go.mod file.

  • go.sum contains the expected cryptographic checksums of the content of specific module versions.
  • If someone clones your repository and downloads your dependencies using the go command, they will receive an error if there is any mismatch between their downloaded copies of your dependencies and the corresponding entries in your go.sum.
  • In addition, go mod verify checks that the on-disk cached copies of module downloads still match the entries in go.sum.
  • Note that go.sum is not a lock file as used in some alternative dependency management systems. (go.mod provides enough information for reproducible builds).
  • See very brief rationale here from Filippo Valsorda on why you should check in your go.sum. See the "Module downloading and verification" section of the tip documentation for more details. See possible future extensions being discussed for example in #24117 and #25530.

Should I still add a 'go.mod' file if I do not have any dependencies?

Yes. This supports working outside of GOPATH, helps communicate to the ecosystem that you are opting in to modules, and in addition the module directive in your go.mod serves as a definitive declaration of the identity of your code (which is one reason why import comments might eventually be deprecated). Of course, modules are purely an opt-in capability in Go 1.11.

FAQs — Semantic Import Versioning

Why must major version numbers appear in import paths?

Please see the discussion on the Semantic Import Versioning and the import compatibility rule in the "Semantic Import Versioning" concepts section above. See also the blog post announcing the proposal, which talks more about the motivation and justification for the import compatibility rule.

Why are major versions v0, v1 omitted from import paths?"

Please see the question "Why are major versions v0, v1 omitted from import paths?" in the earlier FAQ from the official proposal discussion.

What are some implications of tagging my project with major version v0, v1, or making breaking changes with v2+?

In response to a comment about "k8s does minor releases but changes the Go API in each minor release", Russ Cox made the following response that highlights some implications for picking v0, v1, vs. frequently making breaking changes with v2, v3, v4, etc. with your project:

I don't fully understand the k8s dev cycle etc, but I think generally the k8s team needs to decide/confirm what they intend to guarantee to users about stability and then apply version numbers accordingly to express that.

  • To make a promise about API compatibility (which seems like the best user experience!) then start doing that and use 1.X.Y.
  • To have the flexibility to make backwards-incompatible changes in every release but allow different parts of a large program to upgrade their code on different schedules, meaning different parts can use different major versions of the API in one program, then use X.Y.0, along with import paths like k8s.io/client/vX/foo.
  • To make no promises about API compatible and also require every build to have only one copy of the k8s libraries no matter what, with the implied forcing of all parts of a build to use the same version even if not all of them are ready for it, then use 0.X.Y.

On a related note, Kubernetes has some atypical build approaches (currently including custom wrapper scripts on top of godep), and hence Kubernetes is an imperfect example for many other projects, but it will likely be an interesting example as Kubernetes moves towards adopting Go 1.11 modules.

Can a module consume a package that has not opted in to modules?

Yes.

If a repository has not opted in to modules but has been tagged with valid semver tags (including the required leading v), then those semver tags can be used in a go get, and a corresponding semver version will be record in the importing module's go.mod file. If the repository does not have any valid semver tags, then the repository's version will be recorded with a "pseudo-version" such as v0.0.0-20171006230638-a6e239ea1c69 (which includes a timestamp and a commit hash, and which are designed to allow a total ordering across versions recored in go.mod and to make it easier to reason about which recorded versions are "later" than another recorded version).

For example, if the latest version of package foo is tagged v1.2.3 but foo has not itself opted in to modules, then running go get foo or go get foo@v1.2.3 from inside module M will be recorded in module M's go.mod file as:

require  foo  v1.2.3

The go tool will also use available semver tags for a non-module package in additional workflows (such as go list -u=patch, which upgrades the dependencies of a module to available patch releases, or go list -u -m all, which shows available upgrades, etc.).

Please see the next FAQs for additional details related to v2+ packages that have not opted in to modules.

Can a module consume a v2+ package that has not opted into modules? What does '+incompatible' mean?

Yes, a module can import a v2+ package that has not opted into modules, and if the imported v2+ package has a valid semver tag, it will be recorded with an +incompatible suffix.

Additional Details

Please be familiar with the material in the "Semantic Import Versioning" section above.

It is helpful to first review some core principles that are generally useful but particularly important to keep in mind when thinking about the behavior described in this FAQ.

The following core principles are always true when the go tool is operating in module mode (e.g., GO111MODULE=on):

  1. A package's import path defines the identity of the package.
    • Packages with different import paths are treated as different packages.
    • Packages with the same import path are treated as the same package (and this is true even if the VCS tags say the packages have different major versions).
  2. An import path without a /vN is treated as a v1 or v0 module (and this is true even if the imported package has not opted in to modules and has VCS tags that say the major version is greater than 1).
  3. The module path (such as module foo/v2) declared at the start of a module's go.mod file is both:
    • the definitive declaration of that module's identity
    • the definitive declaration of how that module must be imported by consuming code

As we will see in the next FAQ, these principles are not always true when the go tool is not in module mode, but these principles are always true when the go tool is in module mode.

In short, the +incompatible suffix indicates that principle 2 above is in effect when the following are true:

  • an imported package has not opted in to modules, and
  • its VCS tags say the major version is greater than 1, and
  • principle 2 is overriding the VCS tags – the import path without a /vN is treated as a v1 or v0 module (even though the VCS tags say otherwise)

When the go tool is in module mode, it will assume a non-module v2+ package has no awareness of Semantic Import Versioning and treat it as an (incompatible) extension of the v1 version series of the package (and the +incompatible suffix is an indication that the go tool is doing so).

Example

Suppose:

  • oldpackage is a package that predates the introduction of modules
  • oldpackage has never opted in to modules (and hence does not have a go.mod itself)
  • oldpackage has a valid semver tag v3.0.1, which is its latest tag

In this case, running for example go get oldpackage@latest from inside module M will record the following in module M's go.mod file:

require  oldpackage  v3.0.1+incompatible

Note that there is no /v3 used at the end of oldpackage in the go get command above or in the recorded require directive – using /vN in module paths and import paths is a feature of Semantic Import Versioning, and oldpackage has not signaled its acceptance and understanding of Semantic Import Versioning given oldpackage has not opted into modules by having a go.mod file within oldpackage itself. In other words, even though oldpackage has a semver tag of v3.0.1, oldpackage is not granted the rights and responsibilities of Semantic Import Versioning (such as using /vN in import paths) because oldpackage has not yet stated its desire to do so.

The +incompatible suffix indicates that the v3.0.1 version of oldpackage has not actively opted in to modules, and hence the v3.0.1 version of oldpackage is assumed to not understand Semantic Import Versioning or how to use major versions in import paths. Therefore, when operating in module mode, the go tool will treat the non-module v3.0.1 version of oldpackage as an (incompatible) extension of the v1 version series of oldpackage and assume that the v3.0.1 version of oldpackage has no awareness of Semantic Import Versioning, and the +incompatible suffix is an indication that the go tool is doing so.

The fact that the the v3.0.1 version of oldpackage is considered to be part of the v1 release series according to Semantic Import Versioning means for example that versions v1.0.0, v2.0.0, and v3.0.1 are all always imported using the same import path:

import  "oldpackage"

Note again that there is no /v3 used at the end of oldpackage.

In general, packages with different import paths are different packages. In this example, given versions v1.0.0, v2.0.0, and v3.0.1 of oldpackage would all be imported using the same import path, they are therefore treated by a build as the same package (again because oldpackage has not yet opted in to Semantic Import Versioning), with a single copy of oldpackage ending up in any given build. (The version used will be the semantically highest of the versions listed in any require directives; see "Version Selection").

If we suppose that later a new v4.0.0 release of oldpackage is created that adopts modules and hence contains a go.mod file, that is the signal that oldpackage now understands the rights and responsibilities of Semantic Import Versioning, and hence a module-based consumer would now import using /v4 in the import path:

import  "oldpackage/v4"

and the version would be recorded as:

require  oldpackage/v4  v4.0.0

oldpackage/v4 is now a different import path than oldpackage, and hence a different package. Two copies (one for each import path) would end up in a module-aware build if some consumers in the build have import "oldpackage/v4" while other consumers in the same build have import "oldpackage". This is desirable as part of the strategy to allow gradual adoption of modules. In addition, even after modules are out of their current transitional phase, this behavior is also desirable to allow gradual code evolution over time with different consumers upgrading at different rates to newer versions (e.g., allowing different consumers in a large build to choose to upgrade at different rates from oldpackage/v4 to some future oldpackage/v5).

How are v2+ modules treated in a build if modules support is not enabled? How does "minimal module compatibility" work in 1.9.7+, 1.10.3+, and 1.11?

When considering older Go versions or Go code that has not yet opted in to modules, Semantic Import Versioning has significant backwards compatibility implications related to v2+ modules.

As described in the "Semantic Import Versioning" section above:

  • a module that is version v2 or higher must include a /vN in its own module path declared in its go.mod.
  • a module-based consumer (that is, code that has opted in to modules) must include a /vN in the import path to import a v2+ module.

However, the ecosystem is expected to proceed at varying paces of adoption for modules and Semantic Import Versioning.

As described in more detail in the "How to Release a v2+ Module" section, in the "Major Subdirectory" approach, the author of a v2+ module creates subdirectories such as mymodule/v2 or mymodule/v3 and moves or copies the approriate packages underneath those subdirectories. This means the traditional import path logic (even in older Go releases such as Go 1.8 or 1.7) will find the appropriate packages upon seeing an import statement such as import "mymodule/v2/mypkg". Hence, packages residing in a "Major Subdirectory" v2+ module will be found and used even if modules support is not enabled (whether that is because you are running Go 1.11 and have not enabled modules, or because you are running a older version like Go 1.7, 1.8, 1.9 or 1.10 that does not have full module support). Please see the "How to Release a v2+ Module" section for more details on the "Major Subdirectory" approach.

The remainder of this FAQ is focused on the "Major Branch" approach described in the "How to Release a v2+ Module" section. In the "Major Branch" approach, no /vN subdirectories are created and instead the module version information is communicated by the go.mod file and by applying semver tags to commits (which often will be on master, but could be on different branches).

In order to help during the current transitional period, "minimal module compatibility" was introduced to Go 1.11 to provide greater compatibility for Go code that has not yet opted in to modules, and that "minimal module compatibility" was also backported to Go 1.9.7 and 1.10.3 (where those versions are effectively always operating with full module mode disabled given those older Go versions do not have full module support).

The primary goals of "minimal module compatibility" are:

  1. Allow older Go versions 1.9.7+ and 1.10.3+ to be able to more easily compile modules that are using Semantic Import Versioning with /vN in import paths, and provide that same behavior when module mode is disabled in Go 1.11.

  2. Allow old code to be able to consume a v2+ module without requiring that old consumer code to immediately change to using a new /vN import path when consuming a v2+ module.

  3. Do so without relying on the module author to create /vN subdirectories.

Additional Details – "Minimal Module Compatibility"

"Minimal module compatibility" only takes effect when full module mode is disabled for the go tool, such as if you have set GO111MODULE=off in Go 1.11, or are using Go versions 1.9.7+ or 1.10.3+.

When a v2+ module author has not created /v2 or /vN subdirectories and you are instead relying on the "minimal module compatibility" mechanism in Go 1.9.7+, 1.10.3+ and 1.11:

  • A package that has not opted in to modules would not include the major version in the import path for any imported v2+ modules.
  • In contrast, a package that has opted in to modules must include the major version in the import path to import any v2+ modules.
    • If a package has opted in to modules, but does not include the major version in the import path when importing a v2+ modules, it will not import a v2+ version of that module when the go tool is operating in full module mode. (A package that has opted in to modules is assumed to "speak" Semantic Import Versioning. If foo is a module with v2+ versions, then under Semantic Import Versioning saying import "foo" means import the v1 Semantic Import Versioning series of foo).
  • The mechanism used to implement "minimal module compatibility" is intentionally very narrow:
    • The entirety of the logic is – when operating in GOPATH mode, an unresolvable import statement containing a /vN will be tried again after removing the /vN if the import statement is inside code that has opted in to modules (that is, import statements in .go files within a tree with a valid go.mod file).
    • The net effect is that an import statement such as import "foo/v2" within code that lives inside of a module will still compile correctly in GOPATH mode in 1.9.7+, 1.10.3+ and 1.11, and it will resolve as if it said import "foo" (without the /v2), which means it will use the version of foo that resides in your GOPATH without being confused by the extra /v2.
    • "Minimal module compatibility" does not affect anything else, including it does not the affect paths used in the go command line (such as arguments to go get or go list).
  • This transitional "minimal module awareness" mechanism purposefully breaks the rule of "packages with different import paths are treated as different packages" in pursuit a very specific backwards compatibility goal – to allow old code to compile unmodified when it is consuming a v2+ module. In slightly more detail:
    • It would be a more burdensome for the overall ecosystem if the only way for old code to consume a v2+ module was to first change the old code.
    • If we are not modifying old code, then that old code must work with pre-module import paths for v2+ modules.
    • On the other hand, new or updated code opting in to modules must use the new /vN import for v2+ modules.
    • The new import path is not equal to old import path, yet both are allowed to work in a single build, and therefore we have two different functioning import paths that resolve to the same package.
    • For example, when operating in GOPATH mode, import "foo/v2" appearing in module-based code resolves to the same code residing in your GOPATH as import "foo", and the build ends up with one copy of foo – in particular, whatever version is on disk in GOPATH. This allows module-based code with import "foo/v2" to compile even in GOPATH mode in 1.9.7+, 1.10.3+ and 1.11.
  • In contrast, when the go tool is operating in full module mode:
    • There are no exceptions to the rule "packages with different import paths are different packages" (including vendoring has been refined in full module mode to also adhere to this rule).
    • For example, if the go tool is in full module mode and foo is a v2+ module, then import "foo" is asking for a v1 version of foo vs. import "foo/v2" is asking for a v2 version of foo.

FAQS — Multi-Module Repositories

What are multi-module repositories?

A multi-module repository is a repository that contains multiple modules, each with its own go.mod file. Each module starts at the directory containing its go.mod file, and contains all packages from that directory and its subdirectories recursively, excluding any subtree that contains another go.mod file.

Each module has its own version information. Version tags for modules below the root of the repository must include the relative directory as a prefix. For example, consider the following repository:

my-repo
|____foo
| |____rop
| | |____go.mod

The tag for version 1.2.3 of module "my-repo/foo/rop" is "foo/rop/v1.2.3".

Typically, the path for one module in the repository will be a prefix of the others. For example, consider this repository:

my-repo
|____go.mod
|____bar
|____foo
| |____rop
| |____yut
|____mig
| |____go.mod
| |____vub

Fig. A top-level module's path is a prefix of another module's path.

Fig. A top-level module's path is a prefix of another module's path.

This repository contains two modules. However, the module "my-repo" is a prefix of the path of the module "my-repo/mig".

Adding modules, removing modules, and versioning modules in such a configuration require considerable care and deliberation, so it is almost always easier and simpler to manage a single-module repository rather than multiple modules in an existing repository.

Is it possible to add a module to a multi-module repository?

Yes. However, there are two classes of this problem:

The first class: the package to which the module is being added to is not in version control yet (a new package). This case is straightforward: add the package and the go.mod in the same commit, tag the commit, and push.

The second class: the path at which the module is being added is in version control and contains one or more existing packages. This case requires a considerable amount of care. To illustrate, consider again the following repository (now in a github.com location to simulate the real-world better):

github.com/my-repo
|____go.mod
|____bar
|____foo
| |____rop
| |____yut
|____mig
| |____vub

Consider adding module "github.com/my-repo/mig". If one were to follow the same approach as above, the package /my-repo/mig could be provided by two different modules: the old version of "github.com/my-repo", and the new, standalone module "github.com/my-repo/mig. If both modules are active, importing "github.com/my-repo/mig" would cause an “ambiguous import” error at compile time.

The way to get around this is to make the newly-added module depend on the module it was "carved out" from, at a version after which it was carved out.

Let's step through this with the above repository, assuming that "github.com/my-repo" is currently at v1.2.3:

  1. Add github.com/my-repo/mig/go.mod:

    cd path-to/github.com/my-repo/mig
    go mod init github.com/my-repo/mig
    
    # Note: if "my-repo/mig" does not actually depend on "my-repo", add a blank
    # import.
    # Note: version must be at or after the carve-out.
    go mod edit -require github.com/myrepo@v1.3
    
  2. git commit

  3. git tag v1.3.0

  4. git tag mig/v1.0.0

  5. Next, let's test these. We can't go build or go test naively, since the go commands would try to fetch each dependent module from the module cache. So, we need to use replace rules to cause go commands to use the local copies:

    cd path-to/github.com/my-repo/mig
    go mod edit -replace github.com/my-repo@v1.3.0=../
    go test ./...
    go mod edit -dropreplace github.com/my-repo@v1.3.0
    
  6. git push origin master v1.2.4 mig/v1.0.0 push the commit and both tags

Note that in the future golang.org/issue/28835 should make the testing step a more straightforward experience.

Note also that code was removed from module "github.com/my-repo" between minor versions. It may seem strange to not consider this a major change, but in this instance the transitive dependencies continue to provide compatible implementations of the removed packages at their original import paths.

Is it possible to remove a module from a multi-module repository?

Yes, with the same two cases and similar steps as above.

Can a module depend on an internal/ in another?

Yes. Packages in one module are allowed to import internal packages from another module as long as they share the same path prefix up to the internal/ path component. For example, consider the following repository:

my-repo
|____go.mod
|____internal
|____foo
| |____go.mod

Here, package foo can import /my-repo/internal as long as module "my-repo/foo" depends on module "my-repo". Similarly, in the following repository:

my-repo
|____internal
| |____go.mod
|____foo
| |____go.mod

Here, package foo can import my-repo/internal as long as module "my-repo/foo" depends on module "my-repo/internal". The semantics are the same in both: since my-repo is a shared path prefix between my-repo/internal and my-repo/foo, package foo is allowed to import package internal.

FAQs — Minimal Version Selection

Won't minimal version selection keep developers from getting important updates?

Please see the question "Won't minimal version selection keep developers from getting important updates?" in the earlier FAQ from the official proposal discussion.

FAQs — Possible Problems

What are some general things I can spot check if I am seeing a problem?

  • Double-check that modules are enabled by running go env to confirm it does not show an empty value for the read-only GOMOD variable.
    • Note: you never set GOMOD as a variable because it is effectively read-only debug output that go env outputs.
    • If you are setting GO111MODULE=on to enable modules, double-check that it is not accidentally the plural GO111MODULES=on. (People sometimes naturally include the S because the feature is often called "modules").
  • If vendoring is expected to be used, double-check check that the -mod=vendor flag is being passed to go build or similar, or that GOFLAGS=-mod=vendor is set.
    • Modules by default ignore the vendor directory unless you ask the go tool to use vendor.
  • It is frequently helpful to check go list -m all to see the list of actual versions selected for your build
    • go list -m all usually gives you more detail compared to if you were to instead just look a go.mod file.
  • If running go get foo fails in some way, or if go build is failing on a particular package foo, it often can be helpful to check the output from go get -v foo or go get -v -x foo:
    • In general, go get will often provide more a detailed error message than go build.
    • The -v flag to go get asks to print more verbose details, though be mindful that certain "errors" such as 404 errors might be expected based on how a remote repository was configured.
    • If the nature of the problem is still not clear, you can also try the more verbose go get -v -x foo, which also shows the git or other VCS commands being issued. (If warranted, you can often execute the same git commands outside of the context of the go tool for troubleshooting purposes).
  • You can check to see if you are using a particularly old git version
    • Older versions of git were a common source of problems for the vgo prototype and Go 1.11 beta, but much less frequently in the GA 1.11.
  • The module cache in Go 1.11 can sometimes cause various errors, primarily if there were previously network issues or multiple go commands executing in parallel (see #26794, which is addressed for Go 1.12). As a troubleshooting step, you can copy $GOPATH/pkg/mod to a backup directory (in case further investigation is warranted later), run go clean -modcache, and then see whether the original problem persists.
  • If you are using Docker, it can be helpful to check if you can reproduce the behavior outside of Docker (and if the behavior only occurs in Docker, the list of bullets above can be used as a starting point to compare results between inside Docker vs. outside).

The error you are currently examining might be a secondary issue caused by not having the expected version of a particular module or package in your build. Therefore, if the cause of a particular error is not obvious, it can be helpful to spot check your versions as described in the next FAQ.

What can I check if I am not seeing the expected version of a dependency?

  1. A good first step is to run go mod tidy. There is some chance this might resolve the issue, but it will also help put your go.mod file into a consistent state with respect to your .go source code, which will help make any subsequent investigation easier.

  2. The second step usually should be to check go list -m all to see the list of actual versions selected for your build. go list -m all shows you the final selected versions, including for indirect dependencies and after resolving versions for any shared dependencies. It also shows the outcome of any replace and exclude directives.

  3. A good next step can be to examine the output of go mod graph or go mod graph | grep <module-of-interest>. go mod graph prints the module requirement graph (including taking into account replacements). Each line in the output has two fields: the first column is a consuming module, and the second column is one of that module's requirements (including the version required by that consuming module). This can be a quick way to see which modules are requiring a particular dependency, including when your build has a dependency that has different required versions from different consumers in your build (and if that is the case, it is important to be familiar with the behavior described in the "Version Selection" section above).

go mod why -m <module> can also be useful here, although it is typically more useful for seeing why a dependency is included at all (rather than why a dependency ends up with a particular version).

go list provides many more variations of queries that can be useful to interrogate your modules if needed. One example is the following, which will show the exact versions used in your build excluding test-only dependencies:

go list -deps -f '{{with .Module}}{{.Path}} {{.Version}}{{end}}' ./... | sort -u

A more detailed set of commands and examples for interrogating your modules can be seen in a runnable "Go Modules by Example" walkthough.

One cause of unexpected versions can be due to someone having created an invalid or unexpected go.mod file that was not intended, or a related mistake (for example: a v2.0.1 version of module might have incorrectly declared itself to be module foo in its go.mod without the required /v2; an import statement in .go code intended to import a v3 module might be be missing the required /v3; a require statement in a go.mod for a v4 module might be be missing the required /v4). Therefore, if the cause of a particular issue you are seeing is not obvious, it can be worthwhile to first re-read the material in the "go.mod" and "Semantic Import Versioning" sections above (given these include important rules that modules must follow) and then take a few minutes to spot check the most relevant go.mod files and import statements.

Why am I getting an error 'cannot find module providing package foo'?

This is a general error message that can occur for several different underlying causes.

In some cases, this error is simply due to a mistyped path, so the first step likely should be to double-check for incorrect paths based on the details listed in the error message.

If you have not already done so, a good next step is often to try go get -v foo or go get -v -x foo:

  • In general, go get will often provide more a detailed error message than go build.
  • See the first troubleshooting FAQ in this section above for more details.

Some other possible causes:

  • You might see the error cannot find module providing package foo if you have issued go build or go build . but do not have any .go source files in the current directory. If this is what you are encountering, the solution might be an alternative invocation such as go build ./... (where the ./... expands out to match all the packages within the current module). See #27122.

  • The module cache in Go 1.11 can cause this error, including in the face of network issues or multiple go commands executing in parallel. This is resolved in Go 1.12. See the first troubleshooting FAQ in this section above for more details and possible corrective steps.

Why does 'go mod init' give the error 'cannot determine module path for source directory'?

go mod init without any arguments will attempt to guess the proper module path based on different hints such as VCS meta data. However, it is not expected that go mod init will always be able to guess the proper module path.

If go mod init gives you this error, those heuristics were not able to guess, and you must supply the module path yourself (such as go mod init github.com/you/hello).

I have a problem with a complex dependency that has not opted in to modules. Can I use information from its current dependency manager?

Yes. This requires some manual steps, but can be helpful in some more complex cases.

When you run go mod init when initializing your own module, it will automatically convert from a prior dependency manager by translating configuration files like Gopkg.lock, glide.lock, or vendor.json into a go.mod file that contains corresponding require directives. The information in a pre-existing Gopkg.lock file for example usually describes version information for all of your direct and indirect dependencies.

However, if instead you are adding a new dependency that has not yet opted in to modules itself, there is not a similar automatic conversion process from any prior dependency manager that your new dependency might have been using. If that new dependency itself has non-module dependencies that have had breaking changes, then in some cases that can cause incompatibility problems. In other words, a prior dependency manager of your new dependency is not automatically used, and that can cause problems with your indirect dependencies in some cases.

One approach is to run go mod init on your problematic non-module direct dependency to convert from its current dependency manager, and then use the require directives from the resulting temporary go.mod to populate or update the go.mod in your module.

For example, if github.com/some/nonmodule is a problematic direct dependency of your module that is currently using another dependency manager, you can do something similar to:

$ git clone -b v1.2.3 https://github.com/some/nonmodule /tmp/scratchpad/nonmodule
$ cd /tmp/scratchpad/nonmodule
$ go mod init
$ cat go.mod

The resulting require information from the temporary go.mod can be manually moved into the actual go.mod for your module, or you can consider using https://github.com/rogpeppe/gomodmerge, which is a community tool targeting this use case. In addition, you will want to add a require github.com/some/nonmodule v1.2.3 to your actual go.mod to match the version that you manually cloned.

A concrete example of following this technique for docker is in this #28489 comment, which illustrates getting a consistent set of versions of docker dependencies to avoid case sensitive issues between github.com/sirupsen/logrus vs. github.com/Sirupsen/logrus.

Why does 'go build' require gcc, and why are prebuilt packages such as net/http not used?

In short:

Because the pre-built packages are non-module builds and can’t be reused. Sorry. Disable cgo for now or install gcc.

This is only an issue when opting in to modules (e.g., via GO111MODULE=on). See #26988 for additional discussion.

Do modules work with relative imports like import "./subdir"?

No. See #26645, which includes:

In modules, there finally is a name for the subdirectory. If the parent directory says "module m" then the subdirectory is imported as "m/subdir", no longer "./subdir".

Some needed files may not be present in populated vendor directory

Directories without .go files are not copied inside the vendor directory by go mod vendor. This is by design.

In short, setting aside any particular vendoring behavior – the overall model for go builds is that the files needed to build a package should be in the directory with the .go files.

Using the example of cgo – modifying C source code in other directories will not trigger a rebuild, and instead your build will use stale cache entries. The cgo documentation now includes:

Note that changes to files in other directories do not cause the package to be recompiled, so all non-Go source code for the package should be stored in the package directory, not in subdirectories.

A community tool https://github.com/goware/modvendor allows you to easily copy a complete set of .c, .h, .s, .proto or other files from a module into the vendor director. Although this can be helpful, some care must be taken to make sure your go build is being handled properly in general (regardless of vendoring) if you have files needed to build a package that are outside of the directory with the .go files.

See additional discussion in #26366.

An alternative approach to traditional vendoring is to check in the module cache. It can end up with similar benefits as traditional vendoring and in some ways ends up with a higher fidelity copy. This approach is explained as a "Go Modules by Example" walkthrough.

Clone this wiki locally
You can’t perform that action at this time.