wiring-like lib for cubieboard ,port from WiringPi2-Python
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
WiringPi
cb_test
examples
.gitignore
CHANGES.txt
MANIFEST.in
README
README.md
README.rst
README_CN.txt
USE_ME.txt
build.sh
setup.py
wiringpi.i
wiringpi2-class.py
wiringpi2.py
wiringpi2.pyc
wiringpi_wrap.c

README.md

WiringCB for Python and c

WiringPi: An implementation of most of the Arduino Wiring functions for the Raspberry Pi
WiringPi2: WiringPi version 2 implements new functions for managing IO expanders.
WiringCB: Wiring like lib for cubieboard,change from WiringPi2-Python

sting:

Build with gcc version 4.6.3 (ubuntu/linaro 12.10) Built against Python 2.7.2, Python 3.2.3

Prerequisites:

You must have python-dev and python-setuptools installed
If you manually rebuild the bindings with swig -python wiringpi.i

Get/setup repo:

git clone https://github.com/gootoomoon/WiringCB-python.git

Python Start

Build & install with:

cd WiringCB-python
sudo python setup.py install   # python 2.7.x
sudo python3 setup.py install  # python 3.2.x

Python Usage:

import wiringpi2
OUTPUT = 1
pin = 2
HIGH = 1 
LOW = 0	
	
wiringpi2.wiringPiSetupPhys() # init pin to phy mode,U14(1~48) U15(49~96)
wiringpi2.pinMode(pin,OUTPUT) # set pin 2 to output mode

while 1:
	wiringpi2.digitalWrite(pin,HIGH) # Write HIGH to pin 2(U14 pin 2)
	wiringpi2.delay(1000)
	wiringpi2.digitalWrite(pin,LOW)  # Write LOW to pin
	wiringpi2.delay(1000)

General IO:

wiringpi2.pinMode(2,1)      # Set pin 2 to output
wiringpi2.digitalWrite(2,1) # Write 1 HIGH to pin 2
wiringpi2.digitalRead(50)    # Read pin 50(U15 pin 2)

Soft Tone

Hook a speaker up to your Pi and generate music with softTone. Also useful for generating frequencies for other uses such as modulating A/C.

wiringpi2.softToneCreate(PIN)
wiringpi2.softToneWrite(PIN,FREQUENCY)

Bit shifting:

wiringpi2.shiftOut(1,2,0,123) # Shift out 123 (b1110110, byte 0-255) to data pin 1, clock pin 2

Serial:

serial = wiringpi2.serialOpen('/dev/ttyAMA0',9600) # Requires device/baud and returns an ID
wiringpi2.serialPuts(serial,"hello")
wiringpi2.serialClose(serial) # Pass in ID

Full details at:

http://www.wiringpi.com

C Start

Build & install with:

cd WiringPi2-Python/WiringPi/
./build.sh

C Usage:

#include <wiringPi.h>

#define OUTPUT 	1
#define HIGH 	1
#define LOW	0

int pin = 1;

int main()
{
	wiringPiSetupPhys();  //init wiringCB lib
	pinMode(pin,OUTPUT);  //set pin to output mode
	for(;;){
		digitalWrite(pin,HIGH); //Write HIGH(1) to pin 
		delay(1000);		//delay for 1s
		digitalWrite(pin,LOW);	//Write LOW(0) to pin
		delay(1000);		//delay for 1s
	}
}

compile code like this: gcc -o test test.c -lwiringPi -lpthread