diff --git a/www/docs/tips.md b/www/docs/tips.md
new file mode 100644
index 00000000..a32d07e9
--- /dev/null
+++ b/www/docs/tips.md
@@ -0,0 +1,117 @@
+# Tips, Hints, and useful information
+
+## General maintainability of your packages
+* Try hard to make all files work on all platforms you support. 
+    * Maintaining separate scripts, config, service files, etc for each platform quickly becomes difficult 
+* Put as much conditional logic in the pre/post install scripts as possible instead of trying to build it into the nfpm.yaml
+* *if* you need to know the packaging system I have found it useful to add a `/etc/path-to-cfg/package.env` that contains `_INSTALLED_FROM=apk|deb|rpm` which can be sourced into the pre/post install/remove scripts
+* *if/when* you need to ask questions during the installation process, create an `install.sh` || `setup.sh` script that asks those questions and stores the answers as env vars in `/etc/path-to-cfg/package.env` for use by the pre/post install/remove scripts
+  * If you only need to support deb packages you can use the debconf template/config feature, but since rpm does not support this I would try to unify the way you ask questions.
+
+## Pre/Post Install/Remove/Upgrade scripts
+* [APK Docs](https://wiki.alpinelinux.org/wiki/Creating_an_Alpine_package#install)
+* [RPM Docs](https://docs.fedoraproject.org/en-US/packaging-guidelines/Scriptlets/)
+* [DEB Docs](https://www.debian.org/doc/debian-policy/ch-maintainerscripts.html)
+
+### Example Multi platform post-install script
+```bash
+#!/bin/bash
+
+# Step 1, decide if we should use systemd or init/upstart
+use_systemctl="True"
+systemd_version=0
+if ! command -V systemctl >/dev/null 2>&1; then
+  use_systemctl="False"
+else
+    systemd_version=$(systemctl --version | head -1 | sed 's/systemd //g')
+fi
+
+cleanup() {
+    # This is where you remove files that were not needed on this platform / system
+    if [ "${use_systemctl}" = "False" ]; then
+    	rm -f /path/to/<SERVICE NAME>.service
+    else
+        rm -f /etc/chkconfig/<SERVICE NAME>
+        rm -f /etc/init.d/<SERVICE NAME>
+    fi
+}
+
+# Step 2, check if this is a clean install or an upgrade
+# [ -z "$1" ] == alpine linux - Note alpine uses a separate post-upgrade script
+# [ "$1" = "1" ] == RPM clean install
+# { [ "$1" = "configure" ] && [ -z "$2" ] ;} == deb clean install
+if [ -z "$1" ] || [ "$1" = "1" ] || { [ "$1" = "configure" ] && [ -z "$2" ] ;}; then
+    printf "\033[32m Post Install of an clean install\033[0m\n"
+    # Step 3 (clean install), enable the service in the proper way for this platform
+    if [ "${use_systemctl}" = "False" ]; then
+        if command -V chkconfig >/dev/null 2>&1; then
+          chkconfig --add <SERVICE NAME>
+        fi
+        
+        service <SERVICE NAME> restart ||:
+    else
+    	# rhel/centos7 cannot use ExecStartPre=+ to specify the pre start should be run as root
+    	# even if you want your service to run as non root.
+        if [ "${systemd_version}" -lt 231 ]; then
+	        printf "\033[31m systemd version %s is less then 231, fixing the service file \033[0m\n" "${systemd_version}"
+	        sed -i "s/=+/=/g" /path/to/<SERVICE NAME>.service
+	    fi
+        printf "\033[32m Reload the service unit from disk\033[0m\n"
+        systemctl daemon-reload ||:
+        printf "\033[32m Unmask the service\033[0m\n"
+        systemctl unmask <SERVICE NAME> ||:
+        printf "\033[32m Set the preset flag for the service unit\033[0m\n"
+        systemctl preset <SERVICE NAME> ||:
+        printf "\033[32m Set the enabled flag for the service unit\033[0m\n"
+        systemctl enable <SERVICE NAME> ||:
+        systemctl restart <SERVICE NAME> ||:
+    fi
+else
+    printf "\033[32m Post Install of an upgrade\033[0m\n"
+    # Step 3(upgrade), do what you need
+    ...
+fi
+
+# Step 4, clean up unused files, yes you get a warning when you remove the package, but that is ok. 
+cleanup
+```
+### Example Multi platform (RPM & Deb) post-remove script
+```bash
+#!/bin/bash
+
+action="$1"
+if [ -z "$1" ]; then
+  # Alpine linux does not pass args, so set what you want the post-remove to be
+  # Also it uses a separate pre/post-upgrade script
+  action=purge
+fi
+
+case "$action" in
+  "0", "remove")
+    printf "\033[32m Post Remove of a normal remove\033[0m\n"
+    ;;
+  "1", "upgrade")
+    printf "\033[32m Post Remove of an upgrade\033[0m\n"
+    ;;
+  "purge")
+    printf "\033[32m Post Remove purge, deb only\033[0m\n"
+    ;;
+esac
+```
+
+### Deb & RPM
+* `postremove` runs **AFTER** `postinstall` when you are upgrading a package. 
+   * So you need to be careful if you are deleting files in `postremove`
+
+## Systemd and upstart/init
+### upstart / init
+* try to just say no to supporting this, but if you must make sure you have a single script that works on all platforms you need to support.
+  * as the `post-install` script above does.
+
+### Systemd
+* The docs you find for systemd are generally for the latest and greatest version, and it can be hard to find docs for older versions.
+  * In the above `post-install` script you see I am doing a systemd version check to correct the `ExecStartPre=+...` and `ExecStop=+...` lines
+* You should always use [Table 2. Automatic directory creation and environment variables](https://www.freedesktop.org/software/systemd/man/systemd.exec.html#id-1.14.4.3.6.2)
+  * With the note that only `RuntimeDirectory` is used in systemd < 231
+* `/bin/bash -c "$(which ...) ...` is a great way to make your single service file work on all platforms since rhel and debian based systems have standard executables in differing locations and complain about `executable path is not absolute`
+  * eg `/bin/bash -c '$(which mkdir) -p /var/log/your-service'` 
\ No newline at end of file
diff --git a/www/mkdocs.yml b/www/mkdocs.yml
index 6fef7e96..dc9ec56d 100644
--- a/www/mkdocs.yml
+++ b/www/mkdocs.yml
@@ -39,6 +39,7 @@ nav:
 - install.md
 - usage.md
 - configuration.md
+- tips.md
 - contributing.md
 - sponsors.md