Skip to content
Nordic nRF24L01+ library for .NET Micro Framework
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Type Name Latest commit message Commit time
Failed to load latest commit information.
..svnbridge renamed main solution file Jan 3, 2012
BuildProcessTemplates Upgrade: New Version of LabDefaultTemplate.xaml. To upgrade your buil… Oct 1, 2012
Gadgeteer Module
NRF24L01Plus.sln Update Apr 14, 2017

Nordic nRF24L01+ .NET Micro Framework Driver

Library that enables .NET Micro Framework developers to use Nordic 2.4 GHz wireless tranceivers. This library can be used on any net mf device. It uses SPI to communicate with the module. Developers can send serial data (max 32 byte per packet) from one board to specified receiver address. Each board can have up to 6 addresses (receive packets sent to those addresses).

Key features of nRF24L01+ chip

  • Low cost (complete module costs aprox. 7 USD)
  • Drop in compatible with the nRF24L01
  • Worldwide 2.4GHz ISM band operation
  • Up to 2 Mbps on-air data rate
  • Ultra low power operation and advanced power management
  • 11.3mA peak TX current at 0dB output power
  • 13.5mA peak RX current at 2 Mbps air data rate
  • 900nA in power down mode
  • On chip voltage regulator, 1.9 to 3.6V supply range
  • Enhanced ShockBurst™ hardware link layer
  • Automatic packet assembly (Preamble, Address and CRC)
  • Dynamic payload length
  • Selective auto acknowledgment with payload
  • Auto retransmit
  • 6 data pipe MultiCeiver™
  • Fully air compatible with Nordic nRF2401A, 02, E1 and E2 at 1 Mbps and 250 kbps air data rates
  • Low cost external ±60ppm 16MHz crystal
  • 5V tolerant inputs
  • Low cost chip inductors
  • Compact 20-pin 4x4mm QFN package
You can’t perform that action at this time.