Switch branches/tags
Nothing to show
Find file
185de02 Jun 18, 2015
@simen @chamnit @tmpvar @poelstra @jgeisler0303 @hin
101 lines (80 sloc) 3.41 KB
# Part of Grbl
# Copyright (c) 2009-2011 Simen Svale Skogsrud
# Copyright (c) 2012-2015 Sungeun K. Jeon
# Grbl is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# Grbl is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with Grbl. If not, see <>.
# This is a prototype Makefile. Modify it according to your needs.
# You should at least check the settings for
# DEVICE ....... The AVR device you compile for
# CLOCK ........ Target AVR clock rate in Hertz
# OBJECTS ...... The object files created from your source files. This list is
# usually the same as the list of source files with suffix ".o".
# PROGRAMMER ... Options to avrdude which define the hardware you use for
# uploading to the AVR and the interface where this hardware
# is connected.
# FUSES ........ Parameters for avrdude to flash the fuses appropriately.
DEVICE ?= atmega328p
CLOCK = 16000000
PROGRAMMER ?= -c avrisp2 -P usb
SOURCE = main.c motion_control.c gcode.c spindle_control.c coolant_control.c serial.c \
protocol.c stepper.c eeprom.c settings.c planner.c nuts_bolts.c limits.c \
print.c probe.c report.c system.c
BUILDDIR = build
# FUSES = -U hfuse:w:0xd9:m -U lfuse:w:0x24:m
FUSES = -U hfuse:w:0xd2:m -U lfuse:w:0xff:m
# Tune the lines below only if you know what you are doing:
AVRDUDE = avrdude $(PROGRAMMER) -p $(DEVICE) -B 10 -F
COMPILE = avr-gcc -Wall -Os -DF_CPU=$(CLOCK) -mmcu=$(DEVICE) -I. -ffunction-sections -fdata-sections
OBJECTS = $(addprefix $(BUILDDIR)/,$(notdir $(SOURCE:.c=.o)))
# symbolic targets:
all: grbl.hex
$(COMPILE) -MMD -MP -c $< -o $@
$(COMPILE) -x assembler-with-cpp -c $< -o $(BUILDDIR)/$@
# "-x assembler-with-cpp" should not be necessary since this is the default
# file type for the .S (with capital S) extension. However, upper case
# characters are not always preserved on Windows. To ensure WinAVR
# compatibility define the file type manually.
$(COMPILE) -S $< -o $(BUILDDIR)/$@
flash: all
$(AVRDUDE) -U flash:w:grbl.hex:i
# Xcode uses the Makefile targets "", "clean" and "install"
install: flash fuse
# if you use a bootloader, change the command below appropriately:
load: all
bootloadHID grbl.hex
rm -f grbl.hex $(BUILDDIR)/*.o $(BUILDDIR)/*.d $(BUILDDIR)/*.elf
# file targets:
$(BUILDDIR)/main.elf: $(OBJECTS)
$(COMPILE) -o $(BUILDDIR)/main.elf $(OBJECTS) -lm -Wl,--gc-sections
grbl.hex: $(BUILDDIR)/main.elf
rm -f grbl.hex
avr-objcopy -j .text -j .data -O ihex $(BUILDDIR)/main.elf grbl.hex
avr-size --format=berkeley $(BUILDDIR)/main.elf
# If you have an EEPROM section, you must also create a hex file for the
# EEPROM and add it to the "flash" target.
# Targets for code debugging and analysis:
disasm: main.elf
avr-objdump -d $(BUILDDIR)/main.elf
# include generated header dependencies
-include $(BUILDDIR)/$(OBJECTS:.o=.d)