Skip to content
This repository
branch: master
Fetching contributors…

Octocat-spinner-32-eaf2f5

Cannot retrieve contributors at this time

file 222 lines (202 sloc) 8.417 kb
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221
/*
settings.c - eeprom configuration handling
Part of Grbl

Copyright (c) 2009-2011 Simen Svale Skogsrud
Copyright (c) 2011-2012 Sungeun K. Jeon

Grbl is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

Grbl is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with Grbl. If not, see <http://www.gnu.org/licenses/>.
*/

#include <avr/io.h>
#include "protocol.h"
#include "report.h"
#include "stepper.h"
#include "nuts_bolts.h"
#include "settings.h"
#include "eeprom.h"
#include "limits.h"

settings_t settings;

// Version 4 outdated settings record
typedef struct {
  float steps_per_mm[3];
  uint8_t microsteps;
  uint8_t pulse_microseconds;
  float default_feed_rate;
  float default_seek_rate;
  uint8_t invert_mask;
  float mm_per_arc_segment;
  float acceleration;
  float junction_deviation;
} settings_v4_t;


// Method to store startup lines into EEPROM
void settings_store_startup_line(uint8_t n, char *line)
{
  uint16_t addr = n*(LINE_BUFFER_SIZE+1)+EEPROM_ADDR_STARTUP_BLOCK;
  memcpy_to_eeprom_with_checksum(addr,(char*)line, LINE_BUFFER_SIZE);
}

// Method to store coord data parameters into EEPROM
void settings_write_coord_data(uint8_t coord_select, float *coord_data)
{
  uint16_t addr = coord_select*(sizeof(float)*N_AXIS+1) + EEPROM_ADDR_PARAMETERS;
  memcpy_to_eeprom_with_checksum(addr,(char*)coord_data, sizeof(float)*N_AXIS);
}

// Method to store Grbl global settings struct and version number into EEPROM
void write_global_settings()
{
  eeprom_put_char(0, SETTINGS_VERSION);
  memcpy_to_eeprom_with_checksum(EEPROM_ADDR_GLOBAL, (char*)&settings, sizeof(settings_t));
}

// Method to reset Grbl global settings back to defaults.
void settings_reset(bool reset_all) {
  // Reset all settings or only the migration settings to the new version.
  if (reset_all) {
    settings.steps_per_mm[X_AXIS] = DEFAULT_X_STEPS_PER_MM;
    settings.steps_per_mm[Y_AXIS] = DEFAULT_Y_STEPS_PER_MM;
    settings.steps_per_mm[Z_AXIS] = DEFAULT_Z_STEPS_PER_MM;
    settings.pulse_microseconds = DEFAULT_STEP_PULSE_MICROSECONDS;
    settings.default_feed_rate = DEFAULT_FEEDRATE;
    settings.default_seek_rate = DEFAULT_RAPID_FEEDRATE;
    settings.acceleration = DEFAULT_ACCELERATION;
    settings.mm_per_arc_segment = DEFAULT_MM_PER_ARC_SEGMENT;
    settings.invert_mask = DEFAULT_STEPPING_INVERT_MASK;
    settings.junction_deviation = DEFAULT_JUNCTION_DEVIATION;
  }
  // New settings since last version
  settings.flags = 0;
  if (DEFAULT_REPORT_INCHES) { settings.flags |= BITFLAG_REPORT_INCHES; }
  if (DEFAULT_AUTO_START) { settings.flags |= BITFLAG_AUTO_START; }
  if (DEFAULT_INVERT_ST_ENABLE) { settings.flags |= BITFLAG_INVERT_ST_ENABLE; }
  if (DEFAULT_HARD_LIMIT_ENABLE) { settings.flags |= BITFLAG_HARD_LIMIT_ENABLE; }
  if (DEFAULT_HOMING_ENABLE) { settings.flags |= BITFLAG_HOMING_ENABLE; }
  settings.homing_dir_mask = DEFAULT_HOMING_DIR_MASK;
  settings.homing_feed_rate = DEFAULT_HOMING_FEEDRATE;
  settings.homing_seek_rate = DEFAULT_HOMING_RAPID_FEEDRATE;
  settings.homing_debounce_delay = DEFAULT_HOMING_DEBOUNCE_DELAY;
  settings.homing_pulloff = DEFAULT_HOMING_PULLOFF;
  settings.stepper_idle_lock_time = DEFAULT_STEPPER_IDLE_LOCK_TIME;
  settings.decimal_places = DEFAULT_DECIMAL_PLACES;
  settings.n_arc_correction = DEFAULT_N_ARC_CORRECTION;
  write_global_settings();
}

// Reads startup line from EEPROM. Updated pointed line string data.
uint8_t settings_read_startup_line(uint8_t n, char *line)
{
  uint16_t addr = n*(LINE_BUFFER_SIZE+1)+EEPROM_ADDR_STARTUP_BLOCK;
  if (!(memcpy_from_eeprom_with_checksum((char*)line, addr, LINE_BUFFER_SIZE))) {
    // Reset line with default value
    line[0] = 0;
    settings_store_startup_line(n, line);
    return(false);
  } else {
    return(true);
  }
}

// Read selected coordinate data from EEPROM. Updates pointed coord_data value.
uint8_t settings_read_coord_data(uint8_t coord_select, float *coord_data)
{
  uint16_t addr = coord_select*(sizeof(float)*N_AXIS+1) + EEPROM_ADDR_PARAMETERS;
  if (!(memcpy_from_eeprom_with_checksum((char*)coord_data, addr, sizeof(float)*N_AXIS))) {
    // Reset with default zero vector
    clear_vector_float(coord_data);
    settings_write_coord_data(coord_select,coord_data);
    return(false);
  } else {
    return(true);
  }
}

// Reads Grbl global settings struct from EEPROM.
uint8_t read_global_settings() {
  // Check version-byte of eeprom
  uint8_t version = eeprom_get_char(0);
  
  if (version == SETTINGS_VERSION) {
    // Read settings-record and check checksum
    if (!(memcpy_from_eeprom_with_checksum((char*)&settings, EEPROM_ADDR_GLOBAL, sizeof(settings_t)))) {
      return(false);
    }
  } else {
    if (version <= 4) {
      // Migrate from settings version 4 to current version.
      if (!(memcpy_from_eeprom_with_checksum((char*)&settings, 1, sizeof(settings_v4_t)))) {
        return(false);
      }
      settings_reset(false); // Old settings ok. Write new settings only.
    } else {
      return(false);
    }
  }
  return(true);
}


// A helper method to set settings from command line
uint8_t settings_store_global_setting(int parameter, float value) {
  switch(parameter) {
    case 0: case 1: case 2:
      if (value <= 0.0) { return(STATUS_SETTING_VALUE_NEG); }
      settings.steps_per_mm[parameter] = value; break;
    case 3:
      if (value < 3) { return(STATUS_SETTING_STEP_PULSE_MIN); }
      settings.pulse_microseconds = round(value); break;
    case 4: settings.default_feed_rate = value; break;
    case 5: settings.default_seek_rate = value; break;
    case 6: settings.invert_mask = trunc(value); break;
    case 7: settings.stepper_idle_lock_time = round(value); break;
    case 8: settings.acceleration = value*60*60; break; // Convert to mm/min^2 for grbl internal use.
    case 9: settings.junction_deviation = fabs(value); break;
    case 10: settings.mm_per_arc_segment = value; break;
    case 11: settings.n_arc_correction = round(value); break;
    case 12: settings.decimal_places = round(value); break;
    case 13:
      if (value) { settings.flags |= BITFLAG_REPORT_INCHES; }
      else { settings.flags &= ~BITFLAG_REPORT_INCHES; }
      break;
    case 14: // Reset to ensure change. Immediate re-init may cause problems.
      if (value) { settings.flags |= BITFLAG_AUTO_START; }
      else { settings.flags &= ~BITFLAG_AUTO_START; }
      break;
    case 15: // Reset to ensure change. Immediate re-init may cause problems.
      if (value) { settings.flags |= BITFLAG_INVERT_ST_ENABLE; }
      else { settings.flags &= ~BITFLAG_INVERT_ST_ENABLE; }
      break;
    case 16:
      if (value) { settings.flags |= BITFLAG_HARD_LIMIT_ENABLE; }
      else { settings.flags &= ~BITFLAG_HARD_LIMIT_ENABLE; }
      limits_init(); // Re-init to immediately change. NOTE: Nice to have but could be problematic later.
      break;
    case 17:
      if (value) { settings.flags |= BITFLAG_HOMING_ENABLE; }
      else { settings.flags &= ~BITFLAG_HOMING_ENABLE; }
      break;
    case 18: settings.homing_dir_mask = trunc(value); break;
    case 19: settings.homing_feed_rate = value; break;
    case 20: settings.homing_seek_rate = value; break;
    case 21: settings.homing_debounce_delay = round(value); break;
    case 22: settings.homing_pulloff = value; break;
    default:
      return(STATUS_INVALID_STATEMENT);
  }
  write_global_settings();
  return(STATUS_OK);
}

// Initialize the config subsystem
void settings_init() {
  if(!read_global_settings()) {
    report_status_message(STATUS_SETTING_READ_FAIL);
    settings_reset(true);
    report_grbl_settings();
  }
  // Read all parameter data into a dummy variable. If error, reset to zero, otherwise do nothing.
  float coord_data[N_AXIS];
  uint8_t i;
  for (i=0; i<=SETTING_INDEX_NCOORD; i++) {
    if (!settings_read_coord_data(i, coord_data)) {
      report_status_message(STATUS_SETTING_READ_FAIL);
    }
  }
  // NOTE: Startup lines are handled and called by main.c at the end of initialization.
}
Something went wrong with that request. Please try again.