From 0d44ed0dc97f8641ae96386c3098a8d072211a55 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Gr=C3=A9goire=20Saunier?= Date: Mon, 20 Aug 2018 10:28:08 +0200 Subject: [PATCH] add square recommendation and video --- full_upgrade/for_mk2.5/manual/preflight_check_disassembly.md | 1 + full_upgrade/for_mk2_mk2s/manual/preflight_check_disassembly.md | 1 + full_upgrade/for_mk3/manual/preflight_check_disassembly.md | 1 + 3 files changed, 3 insertions(+) diff --git a/full_upgrade/for_mk2.5/manual/preflight_check_disassembly.md b/full_upgrade/for_mk2.5/manual/preflight_check_disassembly.md index 8951fae2..ab8aa179 100644 --- a/full_upgrade/for_mk2.5/manual/preflight_check_disassembly.md +++ b/full_upgrade/for_mk2.5/manual/preflight_check_disassembly.md @@ -11,6 +11,7 @@ 1. Check that all identical length V-Slots (like 2x370mm) have the exact same dimension. Adjust them with a file if you see a difference 1. Disassemble one z-axis-top of your printer and try the bear upgrade version by pushing the smooth rod in the corresponding hole. This helps you verify that your parts have been printed with good calibration. If it is too tight, use a file to increase hole 1. Do the same as previous point but with z_motor_mount. In this case I recommend to remove the smooth rod. If it is too tight, use a file to increase hole +1. Having a good long square is critical to build the Bear perfectly. Checkout this video : https://www.youtube.com/watch?v=FNpAQHrNpNU 1. Maybe something is interesting for you in the [optional parts](/optional_parts.md) diff --git a/full_upgrade/for_mk2_mk2s/manual/preflight_check_disassembly.md b/full_upgrade/for_mk2_mk2s/manual/preflight_check_disassembly.md index 2268833c..0ea39b4e 100644 --- a/full_upgrade/for_mk2_mk2s/manual/preflight_check_disassembly.md +++ b/full_upgrade/for_mk2_mk2s/manual/preflight_check_disassembly.md @@ -11,6 +11,7 @@ 1. Check that all identical length V-Slots (like 2x370mm) have the exact same dimension. Adjust them with a file if you see a difference 1. Disassemble one z-axis-top of your printer and try the bear upgrade version by pushing the smooth rod in the corresponding hole. This helps you verify that your parts have been printed with good calibration. If it is too tight, use a file to increase hole 1. Do the same as previous point but with z_motor_mount. In this case I recommend to remove the smooth rod. If it is too tight, use a file to increase hole +1. Having a good long square is critical to build the Bear perfectly. Checkout this video : https://www.youtube.com/watch?v=FNpAQHrNpNU 1. Maybe something is interesting for you in the [optional parts](/optional_parts.md) diff --git a/full_upgrade/for_mk3/manual/preflight_check_disassembly.md b/full_upgrade/for_mk3/manual/preflight_check_disassembly.md index e8fe5b1b..1432bc6e 100644 --- a/full_upgrade/for_mk3/manual/preflight_check_disassembly.md +++ b/full_upgrade/for_mk3/manual/preflight_check_disassembly.md @@ -11,6 +11,7 @@ 1. Check that all identical length V-Slots (like 2x370mm) have the exact same dimension. Adjust them with a file if you see a difference 1. Disassemble one z-axis-top of your printer and try the bear upgrade version by pushing the smooth rod in the corresponding hole. This helps you verify that your parts have been printed with good calibration. If it is too tight, use a file to increase hole 1. Do the same as previous point but with z_motor_mount. In this case I recommend to remove the smooth rod. If it is too tight, use a file to increase hole +1. Having a good long square is critical to build the Bear perfectly. Checkout this video : https://www.youtube.com/watch?v=FNpAQHrNpNU 1. Maybe something is interesting for you in the [optional parts](/optional_parts.md)