Fetching latest commit…
Cannot retrieve the latest commit at this time
|Failed to load latest commit information.|
= DRAKE -- Distributed Rake A branch of Rake supporting parallel task execution. == Synopsis Run up to three tasks in parallel: % drake -j3 or equivalently, % drake --threads 3 == Installation % gem install drake == Notes === Compatibility Drake is 100% compatible with Rake. The code path for <tt>--threads=1</tt> is effectively identical to that of Rake's. Drake passes all of Rake's unit tests, with any number of threads from 1 to 1000 (that's the most I tested). === Dependencies In a given Rakefile, it is possible (even likely) that the dependency tree has not been properly defined. Consider task :a => [:x, :y, :z] With single-threaded Rake, _x_,_y_,_z_ will be invoked <em>in that order</em> before _a_ is invoked (assuming there are no other rules involving these tasks). However with <code>drake -jN</code> (for +N+ > 1), one should not expect any particular order of execution. Since there is no dependency specified between _x_,_y_,_z_ above, Drake is free to run them in any order. If you wish _x_,_y_,_z_ to be invoked sequentially, then write task :a => seq[:x, :y, :z] This is shorthand for task :a => :z task :z => :y task :y => :x Upon invoking _a_, the above rules say: "Can't do _a_ until _z_ is complete; can't do _z_ until _y_ is complete; can't do _y_ until _x_ is complete; therefore do _x_." In this fashion the sequence _x_,_y_,_z_ is enforced. The problem of insufficient dependencies plagues Makefiles as well. Package maintainers affectionately call it "not j-safe." === MultiTask When more than one thread is given, +multitask+ behaves just like +task+. Those tasks which may properly be run in parallel will be run in parallel; those which cannot, will not. It is not the user's job to decide. In other words, for <tt>-jN</tt> (+N+ > 1), +multitask+ is an alias of +task+. For <tt>-j1</tt> (default), +multitask+ behaves as the original. === Task#invoke inside Task#invoke Parallelizing code means surrendering control over the micro-management of its execution. Manually invoking tasks inside other tasks is rather contrary to this notion, throwing a monkey wrench into the system. An exception will be raised when this is attempted in multi-threaded mode. === Migrating to -j First of all, do you want to bother with <tt>-j</tt>? If you are satisfied with your build time, then there is really no reason to use it. If on the other hand your build takes twenty minutes to complete, you may be interested in investing some time getting the full dependency tree correct in order to take advantage of multiple CPUs or cores. Though there is no way for Drake to fathom what <em>you</em> mean by a correct dependency, there is a tool available which helps you get closer to saying what you mean. % drake --rand[=SEED] This will randomize the order of sibling prerequisites for each task. When given the optional SEED string, it will call <tt>srand(SEED.hash)</tt> to produce the same permutation each time (String#hash produces the integer which is the seed). The randomize option also disables +multitask+, making it a regular unthreaded +task+. Though this option may produce an error due to an unspecified dependency, at least it will be an error which is exactly the same on each run (with SEED). In addition, you'll have the major debugging advantage of using a single thread. This option will also work in multi-threaded mode. After all, once <tt>-jN</tt> is running smoothly there is <em>still</em> no guarantee that you have it right. However with each successful execution of <tt>drake -jN --rand</tt>, the probability of correctness approaches 1 (though asymptotically so). (The only way to <em>prove</em> correctness is to test <em>all</em> such permutations, which for any non-trivial project would be prohibitively large, especially those which meaningfully benefit from <tt>-j</tt>.) == Links * Download: http://rubyforge.org/frs/?group_id=6530 * Documentation: http://drake.rubyforge.org * Rubyforge home: http://rubyforge.org/projects/drake * Repository: http://github.com/quix/rake == Author * James M. Lawrence <firstname.lastname@example.org> == License Copyright (c) 2003, 2004 Jim Weirich Copyright (c) 2008 James M. Lawrence Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. = RAKE -- Ruby Make -- <em>master branch</em> Supporting Rake version: 0.8.2 This package contains Rake, a simple ruby build program with capabilities similar to make. Rake has the following features: * Rakefiles (rake's version of Makefiles) are completely defined in standard Ruby syntax. No XML files to edit. No quirky Makefile syntax to worry about (is that a tab or a space?) * Users can specify tasks with prerequisites. * Rake supports rule patterns to synthesize implicit tasks. * Flexible FileLists that act like arrays but know about manipulating file names and paths. * A library of prepackaged tasks to make building rakefiles easier. == Download The latest version of rake can be found at * http://rubyforge.org/project/showfiles.php?group_id=50 == Source Repository Rake is currently hosted at github. The github web page is http://github.com/jimweirich/rake. The public git clone URL is * git://github.com/jimweirich/rake.git == Installation === Normal Installation You can install rake with the following command. % ruby install.rb from its distribution directory. === GEM Installation Download and install rake with the following. gem install --remote rake === Running the Rake Test Suite If you wish to run the unit and functional tests that come with Rake: * Install the 'session' gem in order to run the functional tests. adf asdf asdf * CD into the top project directory of rake. * Type one of the following: rake # If you have a version of rake installed ruby -Ilib bin/rake # If you do not have a version of rake installed. == Online Resources == Rake References * Rake Documentation Home: http://docs.rubyrake.org * Rake Project Page: http://rubyforge.org/projects/rake * Rake API Documents: http://rake.rubyforge.org * Rake Source Code Repo: http://github.com/jimweirich/rake * Rake Git Repo Clone URL: git://github.com/jimweirich/rake.git == Presentations and Articles about Rake * Jim Weirich's 2003 RubyConf presentation: http://onestepback.org/articles/buildingwithrake/ * Martin Fowler's article on Rake: http://martinfowler.com/articles/rake.html === Road Map * If you want to see how to invoke rake to build your projects, read on. * If you want to see the format of a Rakefile, see doc/rakefile.rdoc[http://rake.rubyforge.org/files/doc/rakefile_rdoc.html]. * If you want to see the original announcement of rake, see doc/rational.rdoc[http://rake.rubyforge.org/files/doc/rational_rdoc.html]. * If you want to see a glossary of terms, see doc/glossary.rdoc[http://rake.rubyforge.org/files/doc/glossary_rdoc.html]. == Simple Example Once installed, you can run rake as follows ... % rake [options ...] [VAR=VALUE ...] [tasks...] Type "rake --help" for an up-to-date option summary. Invoking <tt>rake</tt> without any options or targets causes rake to look for a rakefile and invoke the default task in that rakefile. For example, given a simple rakefile like this ... task :default => [:test] task :test do ruby "test/unittest.rb" end The command $ rake will invoke the +default+ task. As +default+ satisfies its prerequisites, the +test+ task will run the unit tests for the package. == Other Make Reinvisionings ... Rake is a late entry in the make replacement field. Here are links to other projects with similar (and not so similar) goals. * http://directory.fsf.org/bras.html -- Bras, one of earliest implementations of "make in a scripting language". * http://www.a-a-p.org -- Make in Python * http://www.aromatic.com/tools/jam.txt -- JAM, Java Automated Make * http://ant.apache.org -- The Ant project * http://ppt.perl.org/commands/make/index.html -- Make from the Perl Power Tools implementation. * http://search.cpan.org/search?query=PerlBuildSystem -- The Perl Build System * http://make.rubyforge.org -- Rant, another Ruby make tool. == Credits [<b>Ryan Dlugosz</b>] For the initial conversation that sparked Rake. [<b>email@example.com</b>] For the initial patch for rule support. [<b>Tilman Sauerbeck <firstname.lastname@example.org></b>] For the recursive rule patch. == License Rake is available under an MIT-style license. :include: MIT-LICENSE == Support The Rake homepage is http://rake.rubyforge.org. You can find the Rake RubyForge page at http://rubyforge.org/projects/rake. Feel free to submit commits or feature requests. If you send a patch, remember to update the corresponding unit tests. If fact, I prefer new feature to be submitted in the form of new unit tests. For other information, feel free to ask on the ruby-talk mailing list (which is mirrored to comp.lang.ruby) or contact mailto:email@example.com. ---- = Usage Rake is invoked from the command line using: % rake [<em>options</em> ...] [<em>VAR</em>=<em>VALUE</em>] [<em>targets</em> ...] Options are: [<tt><em>name</em>=<em>value</em></tt>] Set the environment variable <em>name</em> to <em>value</em> during the execution of the <b>rake</b> command. You can access the value by using ENV['<em>name</em>']. [<tt>--classic-namespace</tt> (-n)] Import the Task, FileTask, and FileCreateTask into the top-level scope to be compatible with older versions of Rake. Alternatively you can include the line <code>require 'rake/classic_namespace'</code> in your Rakefile to get the classic behavior. [<tt>--describe</tt> _pattern_ (-D)] Describe the tasks (matching optional PATTERN), then exit. [<tt>--dry-run</tt> (-n)] Do a dry run. Print the tasks invoked and executed, but do not actually execute any of the actions. [<tt>--execute</tt> _code_ (-e)] Execute some Ruby code and exit. [<tt>--execute-print</tt> _code_ (-p)] Execute some Ruby code, print the result, and exit. [<tt>--execute-continue</tt> _code_ (-p)] Execute some Ruby code, then continue with normal task processing. [<tt>--help</tt> (-H)] Display some help text and exit. [<tt>--libdir</tt> _directory_ (-I)] Add _directory_ to the list of directories searched for require. [<tt>--nosearch</tt> (-N)] Do not search for a Rakefile in parent directories. [<tt>--prereqs</tt> (-P)] Display a list of all tasks and their immediate prerequisites. [<tt>--quiet</tt> (-q)] Do not echo commands from FileUtils. [<tt>--rakefile</tt> _filename_ (-f)] Use _filename_ as the name of the rakefile. The default rakefile names are +rakefile+ and +Rakefile+ (with +rakefile+ taking precedence). If the rakefile is not found in the current directory, +rake+ will search parent directories for a match. The directory where the Rakefile is found will become the current directory for the actions executed in the Rakefile. [<tt>--rakelibdir</tt> _rakelibdir_ (-R)] Auto-import any .rake files in RAKELIBDIR. (default is 'rakelib') [<tt>--require</tt> _name_ (-r)] Require _name_ before executing the Rakefile. [<tt>--rules</tt>] Trace the rules resolution. [<tt>--silent (-s)] Like --quiet, but also suppresses the 'in directory' announcement. [<tt>--system</tt> (-g)] Use the system wide (global) rakefiles. The project Rakefile is ignored. By default, the system wide rakefiles are used only if no project Rakefile is found. On Unix-like system, the system wide rake files are located in $HOME/.rake. On a windows system they are stored in $APPDATA/Rake. [<tt>--no-system</tt> (-G)] Use the project level Rakefile, ignoring the system-wide (global) rakefiles. [<tt>--tasks</tt> (-T)] Display a list of the major tasks and their comments. Comments are defined using the "desc" command. [<tt>--trace</tt> (-t)] Turn on invoke/execute tracing. Also enable full backtrace on errors. [<tt>--usage</tt> (-h)] Display a usage message and exit. [<tt>--verbose</tt> (-v)] Echo the Sys commands to standard output. [<tt>--version</tt> (-V)] Display the program version and exit. In addition, any command line option of the form <em>VAR</em>=<em>VALUE</em> will be added to the environment hash <tt>ENV</tt> and may be tested in the Rakefile. --- = Rakefile Format See doc/rakefile.rdoc[http://rake.rubyforge.org/files/doc/rakefile_rdoc.html] for details on the Rakefile format. --- = Other stuff Author:: Jim Weirich <firstname.lastname@example.org> Requires:: Ruby 1.8.0 or later License:: Copyright 2003, 2004 by Jim Weirich. Released under an MIT-style license. See the LICENSE file included in the distribution. == Warranty This software is provided "as is" and without any express or implied warranties, including, without limitation, the implied warranties of merchantibility and fitness for a particular purpose.