[ 0.000000] Linux version 3.10.14__isvp_swan_1.0__ (root@buildkitsandbox) (gcc version 4.7.4 (Buildroot 2016.02) ) #1 PREEMPT Sat Apr 20 03:56:18 UTC 2024 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 RESET ERROR PC:0206A294 [ 0.000000] CPU0 revision is: 00d00100 (Ingenic Xburst) [ 0.000000] FPU revision is: 00b70000 [ 0.000000] cgu_get_rate, parent = 1392000000, rate = 0, m = 0, n = 0, reg val = 0x081000ff [ 0.000000] cgu_get_rate, parent = 1392000000, rate = 0, m = 0, n = 0, reg val = 0x081000ff [ 0.000000] CCLK:1392MHz L2CLK:696Mhz H0CLK:200MHz H2CLK:200Mhz PCLK:100Mhz [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 0041c000 @ 00010000 (usable) [ 0.000000] memory: 000a4000 @ 0042c000 (usable after init) [ 0.000000] User-defined physical RAM map: [ 0.000000] memory: 05c00000 @ 00000000 (usable) [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x00000000-0x05bfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x05bfffff] [ 0.000000] On node 0 totalpages: 23552 [ 0.000000] free_area_init_node: node 0, pgdat 804296d0, node_mem_map 81000000 [ 0.000000] Normal zone: 184 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 23552 pages, LIFO batch:3 [ 0.000000] Primary instruction cache 32kB, 8-way, VIPT, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 8-way, VIPT, no aliases, linesize 32 bytes [ 0.000000] pls check processor_id[0x00d00100],sc_jz not support! [ 0.000000] MIPS secondary cache 128kB, 8-way, linesize 32 bytes. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 23368 [ 0.000000] Kernel command line: console=ttyS1,115200n8 mem=92M@0x0 rmem=36M@0x5c00000 rdinit=/init mtdparts=jz_sfc:256K(boot),1984K(kernel),3904K(rootfs),3904K(app),1984K(kback),3904K(aback),384K(cfg),64K(para) [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Memory: 86988k/94208k available (3554k kernel code, 7220k reserved, 652k data, 656k init, 0k highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] NR_IRQS:358 [ 0.000000] clockevents_config_and_register success. [ 0.000014] Calibrating delay loop... 1391.00 BogoMIPS (lpj=6955008) [ 0.087831] pid_max: default: 4096 minimum: 301 [ 0.092592] Mount-cache hash table entries: 512 [ 0.098331] devtmpfs: initialized [ 0.102408] regulator-dummy: no parameters [ 0.106638] NET: Registered protocol family 16 [ 0.113385] bio: create slab at 0 [ 0.118819] jz-dma jz-dma: JZ SoC DMA initialized [ 0.123711] usbcore: registered new interface driver usbfs [ 0.129282] usbcore: registered new interface driver hub [ 0.134670] usbcore: registered new device driver usb [ 0.139850] (null): set:249 hold:250 dev=100000000 h=500 l=500 [ 0.145945] media: Linux media interface: v0.10 [ 0.150480] Linux video capture interface: v2.00 [ 0.155329] Advanced Linux Sound Architecture Driver Initialized. [ 0.162592] Switching to clocksource jz_clocksource [ 0.167518] cfg80211: Calling CRDA to update world regulatory domain [ 0.174540] dwc2 otg probe start [ 0.174566] jz-dwc2 jz-dwc2: cgu clk gate get error [ 0.179486] DWC IN OTG MODE [ 0.182881] dwc2 dwc2: Keep PHY ON [ 0.186258] dwc2 dwc2: Using Buffer DMA mode [ 0.190573] dwc2 dwc2: Core Release: 3.00a [ 0.194764] dwc2 dwc2: DesignWare USB2.0 High-Speed Host Controller [ 0.201100] dwc2 dwc2: new USB bus registered, assigned bus number 1 [ 0.208234] hub 1-0:1.0: USB hub found [ 0.211966] hub 1-0:1.0: 1 port detected [ 0.216067] dwc2 dwc2: DWC2 Host Initialized [ 0.220488] dwc2 dwc2: enter dwc2_gadget_plug_change:2589: plugin = 1 pullup_on = 0 suspend = 0 [ 0.229294] dwc2 otg probe success [ 0.229424] NET: Registered protocol family 2 [ 0.234208] TCP established hash table entries: 1024 (order: 1, 8192 bytes) [ 0.241215] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.247687] TCP: Hash tables configured (established 1024 bind 1024) [ 0.254138] TCP: reno registered [ 0.257356] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.263278] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.269838] NET: Registered protocol family 1 [ 0.294761] dwc2 dwc2: ID PIN CHANGED! [ 0.634689] freq_udelay_jiffys[0].max_num = 10 [ 0.639114] cpufreq udelay loops_per_jiffy [ 0.643529] 12000 59956 59956 [ 0.646858] 24000 119913 119913 [ 0.650239] 60000 299784 299784 [ 0.653682] 120000 599569 599569 [ 0.657262] 200000 999282 999282 [ 0.660746] 300000 1498924 1498924 [ 0.664462] 600000 2997848 2997848 [ 0.668162] 792000 3957159 3957159 [ 0.671871] 1008000 5036385 5036385 [ 0.675674] 1200000 5995696 5995696 [ 0.682917] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.688941] exFAT: Version 1.2.9 [ 0.692181] jffs2: version 2.2. © 2001-2006 Red Hat, Inc. [ 0.697942] msgmni has been set to 169 [ 0.702505] io scheduler noop registered [ 0.706500] io scheduler cfq registered (default) [ 0.711492] jz-uart.1: ttyS1 at MMIO 0x10031000 (irq = 58) is a uart1 [ 0.719077] console [ttyS1] enabled, bootconsole disabled [ 0.731626] brd: module loaded [ 0.736396] loop: module loaded [ 0.740091] zram: Created 2 device(s) ... [ 0.744757] jz TCU driver register completed [ 0.749384] the id code = 1c7018, the flash name is EN25QH128A [ 0.755447] JZ SFC Controller for SFC channel 0 driver register [ 0.761577] 8 cmdlinepart partitions found on MTD device jz_sfc [ 0.767703] Creating 8 MTD partitions on "jz_sfc": [ 0.772644] 0x000000000000-0x000000040000 : "boot" [ 0.778057] 0x000000040000-0x000000230000 : "kernel" [ 0.783563] 0x000000230000-0x000000600000 : "rootfs" [ 0.789150] 0x000000600000-0x0000009d0000 : "app" [ 0.794468] 0x0000009d0000-0x000000bc0000 : "kback" [ 0.799907] 0x000000bc0000-0x000000f90000 : "aback" [ 0.805419] 0x000000f90000-0x000000ff0000 : "cfg" [ 0.810685] 0x000000ff0000-0x000001000000 : "para" [ 0.816116] SPI NOR MTD LOAD OK [ 0.819686] wait stable.[289][cgu_msc0] [ 0.823653] jzmmc_v1.2 jzmmc_v1.2.0: vmmc regulator missing [ 0.829658] jzmmc_v1.2 jzmmc_v1.2.0: register success! [ 0.835001] jzmmc_v1.2 jzmmc_v1.2.0: card inserted, state=0 [ 0.840832] jzmmc_v1.2 jzmmc_v1.2.1: vmmc regulator missing [ 0.846755] jzmmc_v1.2 jzmmc_v1.2.1: register success! [ 0.855919] TCP: cubic registered [ 0.859347] NET: Registered protocol family 17 [ 0.864417] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 0.870935] ALSA device list: [ 0.874061] #0: Loopback 1 [ 0.877025] #2: Loopback 2 [ 0.882135] Freeing unused kernel memory: 656K (8042c000 - 804d0000) [ 1.093965] mmc0: new high speed SDHC card at address 59b4 [ 1.099805] mmcblk0: mmc0:59b4 SN32G 29.7 GiB [ 1.106233] mmcblk0: p1 [ 24.934466] Adding 131068k swap on /media/mmc/swap. Priority:-1 extents:1 across:131068k SS [ 28.398080] __init [ 28.448484] mmc1: new SDIO card at address 0001 [ 28.577581] [atbm_log]:SVN_VER=20811,DPLL_CLOCK=24,BUILD_TIME=[===== =====] [ 28.592387] [atbm_log]:----drvier RATEPOLCIY=OLD [ 28.597448] [atbm_log]:Probe called [ 28.601099] [atbm_log]:atbm_sdio_probe:v12 [ 28.605560] [atbm_log]:Allocated hw_priv @ 84002d80 [ 28.610755] [atbm_log]:[BH] register. [ 28.614956] [atbm_log]:atbmwifi INIT_WORK enable [ 28.619766] [atbm_log]:atbmwifi INIT_WORK enable [ 28.624858] [atbm_log]:atbm_before_load_firmware++ [ 28.629889] [atbm_log]:atbm_before_load_firmware:0xab0016c = [34800000] [ 28.636989] [atbm_log]:atbm_sdio_rx_thread [ 28.641361] [atbm_log]:atbm_before_load_firmware:0xab0016c = [34800000] [ 28.648481] [atbm_log]:atbm_before_load_firmware:do not set config to smu [ 28.656773] [atbm_log]:atbm_before_load_firmware:read [0x16100074]=[0],ret(0) [ 28.664169] [atbm_log]:rx timeout [ 28.667806] [atbm_log]:atbm_before_load_firmware:write [0x16100074]=[1],ret(0) [ 28.676396] [atbm_log]:atbm_start_load_firmware++ [ 28.681254] [atbm_log]:used firmware.h= [ 28.685354] [atbm_log]:START DOWNLOAD ICCM========= [ 28.690397] [atbm_log]:atbm_load_firmware_generic: addr 10000: len 22000 [ 28.717801] [atbm_log]:START DOWNLOAD DCCM========= [ 28.722837] [atbm_log]:atbm_load_firmware_generic: addr 800000: len 9000 [ 28.735247] [atbm_log]:atbm_after_load_firmware++ [ 28.753786] [atbm_log]:firmwareCap f58f [ 28.757776] [atbm_log]:firmwareCap2 5124 [ 28.761819] [atbm_log]:wsm_caps.firmwareCap 5124f58f [ 28.766775] [atbm_log]:apollo wifi WSM init done. [ 28.766775] Input buffers: 42 x 1728 bytes [ 28.766775] Hardware: 7.1280 [ 28.766775] WSM firmware [=MODEM=RF=Ares_AX 2GHZ Mar 29 2022 11:02:40NOTXConfrim], ver: 13993, build: 2813, api: 1060, cap: 0x5124F58F Config[30008] expection 900b80c, ep0 cmd addr 901d3f8 NumOfStations[8] NumOfInterfaces[3] [ 28.800536] [atbm_log]:EFUSE(8) [0] [ 28.804403] [atbm_log]:EFUSE(I) [1] [ 28.808354] [atbm_log]:EFUSE(B) [0] [ 28.812121] [atbm_log]:CAPABILITIES_ATBM_PRIVATE_IE [1] [ 28.817964] [atbm_log]:CAPABILITIES_NVR_IPC [1] [ 28.823796] [atbm_log]:CAPABILITIES_NO_CONFIRM [1] [ 28.829636] [atbm_log]:CAPABILITIES_SDIO_PATCH [0] [ 28.835477] [atbm_log]:CAPABILITIES_NO_BACKOFF [0] [ 28.841316] [atbm_log]:CAPABILITIES_CFO [0] [ 28.847154] [atbm_log]:CAPABILITIES_AGC [1] [ 28.852997] [atbm_log]:CAPABILITIES_TXCAL [1] [ 28.858841] [atbm_log]:CAPABILITIES_MONITOR [0] [ 28.864684] [atbm_log]:CAPABILITIES_CUSTOM [1] [ 28.870514] [atbm_log]:CAPABILITIES_SMARTCONFIG [0] [ 28.876354] [atbm_log]:CAPABILITIES_ETF [1] [ 28.882192] [atbm_log]:CAPABILITIES_LMAC_RATECTL [1] [ 28.888033] [atbm_log]:CAPABILITIES_LMAC_TPC [1] [ 28.893870] [atbm_log]:CAPABILITIES_LMAC_TEMPC [1] [ 28.899709] [atbm_log]:CAPABILITIES_CTS_BUG [0] [ 28.905551] [atbm_log]:CAPABILITIES_USB_RECOVERY_BUG [0] [ 28.911388] [atbm_log]:CAPABILITIES_USE_IPC [0] [ 28.917228] [atbm_log]:CAPABILITIES_OUTER_PA [0] [ 28.923059] [atbm_log]:CAPABILITIES_POWER_CONSUMPTION [1] [ 28.928900] [atbm_log]:CAPABILITIES_RSSI_DECIDE_TXPOWER [0] [ 28.934736] [atbm_log]:CAPABILITIES_RTS_LONG_DURATION [0] [ 28.940566] [atbm_log]:CAPABILITIES_TX_CFO_PPM_CORRECTION[1] [ 28.946406] [atbm_log]:CAPABILITIES_SHARE_CRYSTAL [0] [ 28.952150] [atbm_log]:CAPABILITIES_HW_CHECKSUM [0] [ 28.957990] [atbm_log]:CAPABILITIES_SINGLE_CHANNEL_MULRX [0] [ 28.963822] [atbm_log]:CAPABILITIES_CFO_DCXO_CORRECTION [1] [ 28.969663] [atbm_log]:EX_CAPABILITIES_TWO_CHIP_ONE_SOC [0] [ 28.975241] [atbm_log]:EX_CAPABILITIES_MANUAL_SET_AC [0][atbm_log]:EX_CAPABILITIES_LMAC_BW_CONTROL [1] [ 28.984934] [atbm_log]:EX_CAPABILITIES_SUPPORT_TWO_ANTENNA [0][atbm_log]:EX_CAPABILITIES_ENABLE_STA_REMAIN_ON_CHANNEL [1] [ 28.996252] [atbm_log]:EX_CAPABILITIES_ENABLE_PS [0][atbm_log]:EX_CAPABILITIES_TX_REQUEST_FIFO_LINK [0] [ 29.006678] [atbm_log]:CONFIG_PRODUCT_TEST_USE_FEATURE_ID [1] [ 29.012781] [atbm_log]:CONFIG_PRODUCT_TEST_USE_GOLDEN_LED [1] [ 29.027664] [atbm_log]:set_block_size=256 [ 29.031802] [atbm_log]:mdelay wait wsm_startup_done !! [ 29.037430] [atbm_log]:atbm_sdio_tx_thread [ 29.041980] [atbm_log]:wsm_generic_confirm:status(2) [ 29.047356] [atbm_log]: wsm_write_mib fail !!! mibId=4132 [ 29.054382] [atbm_log]:apollo wifi : can't open /data/.mac.info [ 29.060840] [atbm_log]:efuse data is [0x1,0x3c,0x1a,0x1c,0x1,0xc,0x0,0x0,0x90:0x31:0x4b:0xc2:0x15:0x64] [ 29.070800] [atbm_log]:apollo wifi : can't open /tmp/atbm_txpwer_dcxo_cfg.txt [ 29.078369] [atbm_log]:apollo wifi : can't open /tmp/set_rate_power.txt [ 29.085737] [atbm_log]:get chip id [14][0][0] [ 29.090322] [atbm_log]:current chiptype 6032i [ 29.095486] [atbm_log]:enable sg [ 29.134688] [atbm_log]:is registered as 'ALTOBEAM' [ 29.139640] [atbm_log]:[atbm_wtd]:set wtd_probe = 1 [ 29.364235] [atbm_log]:mmc1 has been attached [ 29.385106] [atbm_log]:[atbm_module_printk_mask_store]:LOG_ERR=OFF LOG_SCAN=OFF [ 29.385106] [ 29.396861] [atbm_log]:[LOG_ERR=ON]--->[LOG_ERR=OFF] [ 29.401983] [atbm_log]:[LOG_SCAN=ON]--->[LOG_SCAN=OFF] [ 29.407677] [atbm_log]:atbm_module_printk_mask_store end 1 [ 31.179693] [atbm_log]:wlan0:free authen bss ++ [ 31.213963] [atbm_log]:authen:(78:8c:b5:21:50:d2),ssid(aterm-00ff48c-a) [ 31.259764] [atbm_log]:wlan0: authenticated [ 31.264593] [atbm_log]:wlan0:free authen bss ++ [ 31.303961] [atbm_log]:wlan0:free authen bss -- [ 31.324801] [atbm_log]:wlan0: associated [ 31.332031] [atbm_log]:[78:8c:b5:21:50:d2]:40M channel [ 32.459281] [atbm_log]:ieee80211_process_addba_request:mac[78:8c:b5:21:50:d2],tid[0] [ 32.467547] rx ampdu ++ [ 33.115073] [atbm_log]:[PM]:rev ind [ 33.118681] [atbm_log]:[PM]:up pm lock [ 44.219510] v4l2loopback driver version 0.12.5 loaded [ 44.744320] @@@@ tx-isp-probe ok(version H20200506a), compiler date=May 6 2020 @@@@@ [ 44.791810] jz_codec_register: probe() successful! [ 44.803958] cgu_set_rate, parent = 1392000000, rate = 2048000, n = 10875, reg val = 0x01002a7b [ 44.803971] cgu_enable,cgu_i2s_spk reg val = 0x21002a7b [ 44.803992] cgu_set_rate, parent = 1392000000, rate = 2048000, n = 10875, reg val = 0x01002a7b [ 44.804001] cgu_enable,cgu_i2s_mic reg val = 0x21002a7b [ 45.214104] dma dma0chan24: Channel 24 have been requested.(phy id 7,type 0x06 desc a4ea1000) [ 45.223206] dma dma0chan25: Channel 25 have been requested.(phy id 6,type 0x06 desc a3d4d000) [ 45.232647] dma dma0chan26: Channel 26 have been requested.(phy id 5,type 0x04 desc a3e8f000) [ 45.342736] jz_pwm_probe[212] d_name = tcu_chn0 [ 45.354330] The version of PWM driver is H20180309a [ 45.377849] request pwm channel 0 successfully [ 45.391744] pwm-jz pwm-jz: jz_pwm_probe register ok ! [ 47.115665] name : i2c0 nr : 0 [ 47.203975] i2c i2c-0: i2c_jz_irq 441, I2C transfer error, ABORT interrupt [ 47.211103] i2c i2c-0: --I2C txabrt: [ 47.215013] i2c i2c-0: --I2C TXABRT[0]=I2C_TXABRT_ABRT_7B_ADDR_NOACK [ 47.221759] error: sensor_read,285 ret = -5 [ 47.226310] sensor_read: addr=0x3107 value = 0x0 [ 47.231161] err sensor read addr = 0x3107, value = 0x0 [ 47.324273] sensor_read: addr=0xf0 value = 0x20 [ 47.329542] sensor_read: addr=0xf1 value = 0x53 [ 47.334634] info: success sensor find : gc2053 [ 47.339322] misc sinfo_release [ 47.449445] set sensor gpio as PA-low-10bit [ 47.461409] probe ok ------->gc2053 [ 47.534256] -----gc2053_detect: 832 ret = 0, v = 0x20 [ 47.534749] -----gc2053_detect: 838 ret = 0, v = 0x53 [ 47.534757] gc2053 chip found @ 0x37 (i2c0) [ 47.735909] gc2053 stream on [ 47.841483] Err [VIC_INT] : hor err ch3 !!!!! [ 47.845976] Err [VIC_INT] : ver err ch3 !!!!! [ 47.850470] Err [VIC_INT] : mipi ch0 vcomp err !!! [ 47.995808] codec_codec_ctl: set sample rate... [ 47.996140] codec_codec_ctl: set device... [ 48.453774] codec_set_device: set device: MIC... [ 48.698129] codec_codec_ctl: set repaly channel... [ 48.698151] codec_codec_ctl: set sample rate... [ 48.698321] codec_codec_ctl: set device... [ 48.933817] codec_set_device: set device: speaker... [ 48.941193] SPEAKER CTL MODE0 ! [ 52.078172] [atbm_log]:ieee80211_process_addba_request:mac[78:8c:b5:21:50:d2],tid[4] [ 152.799560] [atbm_log]:ieee80211_process_addba_request:mac[78:8c:b5:21:50:d2],tid[6]