[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.15.32-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1538 SMP Thu Mar 31 19:39:41 BST 2022 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.5 [ 0.000000] random: fast init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x00000000fbffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [ 0.000000] percpu: Embedded 16 pages/cpu s35788 r8192 d21556 u65536 [ 0.000000] pcpu-alloc: s35788 r8192 d21556 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1011008 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60 smsc95xx.macaddr=E4:5F:01:B8:BA:93 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=47819d6c-02 rootfstype=ext4 fsck.repair=yes rootwait logo.nologo consoleblank=0 loglevel=0 [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000014890000-0x0000000018890000] (64MB) [ 0.000000] Memory: 3601324K/4050944K available (10240K kernel code, 1390K rwdata, 3292K rodata, 2048K init, 590K bss, 121940K reserved, 327680K cma-reserved, 3264512K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 35355 entries in 104 pages [ 0.000000] ftrace: allocated 104 pages with 3 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 25) [ 0.000000] random: get_random_bytes called from start_kernel+0x574/0x758 with crng_init=1 [ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [ 0.000019] Switching to timer-based delay loop, resolution 18ns [ 0.000312] Console: colour dummy device 80x30 [ 0.000378] printk: console [tty1] enabled [ 0.000448] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [ 0.000479] pid_max: default: 32768 minimum: 301 [ 0.000622] LSM: Security Framework initializing [ 0.000789] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000819] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.002424] cgroup: Disabling memory control group subsystem [ 0.002682] CPU: Testing write buffer coherency: ok [ 0.002741] CPU0: Spectre BHB: using loop workaround [ 0.003205] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004465] Setting up static identity map for 0x200000 - 0x20003c [ 0.004674] rcu: Hierarchical SRCU implementation. [ 0.005670] smp: Bringing up secondary CPUs ... [ 0.006908] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006925] CPU1: Spectre BHB: using loop workaround [ 0.008284] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.008301] CPU2: Spectre BHB: using loop workaround [ 0.009631] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.009648] CPU3: Spectre BHB: using loop workaround [ 0.009807] smp: Brought up 1 node, 4 CPUs [ 0.009828] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.009900] CPU: All CPU(s) started in HYP mode. [ 0.009913] CPU: Virtualization extensions available. [ 0.010781] devtmpfs: initialized [ 0.026296] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.026539] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.026577] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.037099] pinctrl core: initialized pinctrl subsystem [ 0.038412] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.043110] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.043922] audit: initializing netlink subsys (disabled) [ 0.044191] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1 [ 0.044836] thermal_sys: Registered thermal governor 'step_wise' [ 0.045606] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.045627] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.046059] Serial: AMBA PL011 UART driver [ 0.059800] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.100085] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-03-24T13:20:19, variant start_x [ 0.110102] raspberrypi-firmware soc:firmware: Firmware hash is e5a963efa66a1974127860b42e913d2374139ff5 [ 0.168715] Kprobes globally optimized [ 0.174496] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.179226] vgaarb: loaded [ 0.179734] SCSI subsystem initialized [ 0.179959] usbcore: registered new interface driver usbfs [ 0.180020] usbcore: registered new interface driver hub [ 0.180123] usbcore: registered new device driver usb [ 0.181071] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.181581] pps_core: LinuxPPS API ver. 1 registered [ 0.181598] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.181626] PTP clock support registered [ 0.183342] clocksource: Switched to clocksource arch_sys_counter [ 0.274052] VFS: Disk quotas dquot_6.6.0 [ 0.274163] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.274350] FS-Cache: Loaded [ 0.274550] CacheFiles: Loaded [ 0.275728] simple-framebuffer 3e402000.framebuffer: framebuffer at 0x3e402000, 0x7f8000 bytes [ 0.275752] simple-framebuffer 3e402000.framebuffer: format=a8r8g8b8, mode=1920x1080x32, linelength=7680 [ 0.276286] Console: switching to colour frame buffer device 240x67 [ 0.286875] simple-framebuffer 3e402000.framebuffer: fb0: simplefb registered! [ 0.295926] NET: Registered PF_INET protocol family [ 0.296192] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.297861] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.297894] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.297961] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.298040] TCP: Hash tables configured (established 8192 bind 8192) [ 0.298217] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.298259] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.298514] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.299561] RPC: Registered named UNIX socket transport module. [ 0.299578] RPC: Registered udp transport module. [ 0.299592] RPC: Registered tcp transport module. [ 0.299607] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.299629] PCI: CLS 0 bytes, default 64 [ 1.137482] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 1.140210] Initialise system trusted keyrings [ 1.140490] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [ 1.149677] zbud: loaded [ 1.151731] FS-Cache: Netfs 'nfs' registered for caching [ 1.152595] NFS: Registering the id_resolver key type [ 1.152633] Key type id_resolver registered [ 1.152648] Key type id_legacy registered [ 1.152789] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.152805] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 1.153933] Key type asymmetric registered [ 1.153950] Asymmetric key parser 'x509' registered [ 1.154188] bounce: pool size: 64 pages [ 1.154268] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.154509] io scheduler mq-deadline registered [ 1.154526] io scheduler kyber registered [ 1.164234] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.164280] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [ 1.164375] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [ 1.164469] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00ffffffff -> 0x0400000000 [ 1.225449] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.225838] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.225858] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.225882] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.225973] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.226223] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.229997] PCI: bus0: Fast back to back transfers disabled [ 1.230021] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 1.230413] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.230543] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.230975] pci 0000:01:00.0: PME# supported from D0 D3hot [ 1.234724] PCI: bus1: Fast back to back transfers disabled [ 1.234745] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.234791] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.234820] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [ 1.234906] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.234932] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.235355] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.235599] pcieport 0000:00:00.0: PME: Signaling with IRQ 77 [ 1.246718] iproc-rng200 fe104000.rng: hwrng registered [ 1.247117] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 1.248690] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [ 1.262124] brd: module loaded [ 1.272870] loop: module loaded [ 1.273777] Loading iSCSI transport class v2.0-870. [ 1.279192] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.373502] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.374791] usbcore: registered new interface driver r8152 [ 1.374884] usbcore: registered new interface driver lan78xx [ 1.374949] usbcore: registered new interface driver smsc95xx [ 1.426836] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.426877] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [ 1.432563] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00003c0000000890 [ 1.433981] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 1.434007] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.434028] usb usb1: Product: xHCI Host Controller [ 1.434045] usb usb1: Manufacturer: Linux 5.15.32-v7l+ xhci-hcd [ 1.434063] usb usb1: SerialNumber: 0000:01:00.0 [ 1.434870] hub 1-0:1.0: USB hub found [ 1.434969] hub 1-0:1.0: 1 port detected [ 1.435661] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.435690] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [ 1.435716] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.436178] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 1.436201] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.436220] usb usb2: Product: xHCI Host Controller [ 1.436237] usb usb2: Manufacturer: Linux 5.15.32-v7l+ xhci-hcd [ 1.436254] usb usb2: SerialNumber: 0000:01:00.0 [ 1.436979] hub 2-0:1.0: USB hub found [ 1.437051] hub 2-0:1.0: 4 ports detected [ 1.438896] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.439273] dwc_otg: FIQ enabled [ 1.439287] dwc_otg: NAK holdoff enabled [ 1.439300] dwc_otg: FIQ split-transaction FSM enabled [ 1.439319] Module dwc_common_port init [ 1.439814] usbcore: registered new interface driver uas [ 1.439926] usbcore: registered new interface driver usb-storage [ 1.440149] mousedev: PS/2 mouse device common for all mice [ 1.445821] sdhci: Secure Digital Host Controller Interface driver [ 1.445839] sdhci: Copyright(c) Pierre Ossman [ 1.446597] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.450509] ledtrig-cpu: registered to indicate activity on CPUs [ 1.450865] hid: raw HID events driver (C) Jiri Kosina [ 1.451100] usbcore: registered new interface driver usbhid [ 1.451116] usbhid: USB HID core driver [ 1.457742] Initializing XFRM netlink socket [ 1.457802] NET: Registered PF_PACKET protocol family [ 1.457929] Key type dns_resolver registered [ 1.458356] Registering SWP/SWPB emulation handler [ 1.459221] registered taskstats version 1 [ 1.459254] Loading compiled-in X.509 certificates [ 1.460152] Key type ._fscrypt registered [ 1.460168] Key type .fscrypt registered [ 1.460183] Key type fscrypt-provisioning registered [ 1.472775] uart-pl011 fe201000.serial: there is not valid maps for state default [ 1.473116] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.473250] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 34, base_baud = 0) is a PL011 rev2 [ 1.482635] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.483194] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 1.484553] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.484574] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.514834] of_cfs_init [ 1.515104] of_cfs_init: OK [ 1.550666] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [ 1.551093] Waiting for root device PARTUUID=47819d6c-02... [ 1.587373] mmc0: new high speed SDHC card at address 59b4 [ 1.588423] mmcblk0: mmc0:59b4 USD 7.51 GiB [ 1.591926] mmcblk0: p1 p2 [ 1.592501] mmcblk0: mmc0:59b4 USD 7.51 GiB [ 1.601871] mmc1: new high speed SDIO card at address 0001 [ 1.615856] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. [ 1.615952] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.624669] devtmpfs: mounted [ 1.636122] Freeing unused kernel image (initmem) memory: 2048K [ 1.643679] Run /sbin/init as init process [ 1.643695] with arguments: [ 1.643707] /sbin/init [ 1.643720] with environment: [ 1.643733] HOME=/ [ 1.643746] TERM=linux [ 1.723398] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 1.906034] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [ 1.906065] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.906084] usb 1-1: Product: USB2.0 Hub [ 1.908430] hub 1-1:1.0: USB hub found [ 1.908720] hub 1-1:1.0: 4 ports detected [ 2.192588] systemd[1]: System time before build time, advancing clock. [ 2.233393] usb 1-1.4: new low-speed USB device number 3 using xhci_hcd [ 2.324326] NET: Registered PF_INET6 protocol family [ 2.326135] Segment Routing with IPv6 [ 2.326181] In-situ OAM (IOAM) with IPv6 [ 2.375290] usb 1-1.4: New USB device found, idVendor=03f0, idProduct=304a, bcdDevice= 0.11 [ 2.375325] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.375346] usb 1-1.4: Product: HP Business Slim Keyboard [ 2.375363] usb 1-1.4: Manufacturer: Chicony [ 2.388137] input: Chicony HP Business Slim Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:03F0:304A.0001/input/input0 [ 2.395855] systemd[1]: systemd 247.3-7+rpi1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [ 2.396795] systemd[1]: Detected architecture arm. [ 2.408377] systemd[1]: Set hostname to . [ 2.454172] hid-generic 0003:03F0:304A.0001: input,hidraw0: USB HID v1.10 Keyboard [Chicony HP Business Slim Keyboard] on usb-0000:01:00.0-1.4/input0 [ 2.464644] input: Chicony HP Business Slim Keyboard Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:03F0:304A.0002/input/input1 [ 2.533987] input: Chicony HP Business Slim Keyboard System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:03F0:304A.0002/input/input2 [ 2.534446] input: Chicony HP Business Slim Keyboard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:03F0:304A.0002/input/input3 [ 2.535177] hid-generic 0003:03F0:304A.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [Chicony HP Business Slim Keyboard] on usb-0000:01:00.0-1.4/input1 [ 3.346150] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed. [ 3.543202] systemd[1]: Queued start job for default target Graphical Interface. [ 3.544948] random: systemd: uninitialized urandom read (16 bytes read) [ 3.549639] systemd[1]: Created slice system-modprobe.slice. [ 3.550461] random: systemd: uninitialized urandom read (16 bytes read) [ 3.551625] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 3.552145] random: systemd: uninitialized urandom read (16 bytes read) [ 3.553001] systemd[1]: Created slice User and Session Slice. [ 3.554053] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.555707] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.556897] systemd[1]: Reached target Slices. [ 3.557432] systemd[1]: Reached target Swap. [ 3.558888] systemd[1]: Listening on Syslog Socket. [ 3.560069] systemd[1]: Listening on fsck to fsckd communication Socket. [ 3.560897] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 3.562464] systemd[1]: Listening on Journal Audit Socket. [ 3.564155] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.565540] systemd[1]: Listening on Journal Socket. [ 3.568112] systemd[1]: Listening on udev Control Socket. [ 3.569381] systemd[1]: Listening on udev Kernel Socket. [ 3.570675] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [ 3.576401] systemd[1]: Mounting POSIX Message Queue File System... [ 3.583676] systemd[1]: Mounting RPC Pipe File System... [ 3.591555] systemd[1]: Mounting Kernel Debug File System... [ 3.599716] systemd[1]: Mounting Kernel Trace File System... [ 3.600721] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [ 3.610604] systemd[1]: Starting Restore / save the current clock... [ 3.619888] systemd[1]: Starting Set the console keyboard layout... [ 3.627913] systemd[1]: Starting Create list of static device nodes for the current kernel... [ 3.636806] systemd[1]: Starting Load Kernel Module configfs... [ 3.645857] systemd[1]: Starting Load Kernel Module drm... [ 3.660278] systemd[1]: Starting Load Kernel Module fuse... [ 3.666601] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 3.675906] systemd[1]: Starting File System Check on Root Device... [ 3.690683] systemd[1]: Starting Journal Service... [ 3.714103] systemd[1]: Starting Load Kernel Modules... [ 3.722658] systemd[1]: Starting Coldplug All udev Devices... [ 3.744203] systemd[1]: Mounted POSIX Message Queue File System. [ 3.745481] systemd[1]: Mounted RPC Pipe File System. [ 3.746609] systemd[1]: Mounted Kernel Debug File System. [ 3.749412] systemd[1]: Mounted Kernel Trace File System. [ 3.752165] systemd[1]: Finished Create list of static device nodes for the current kernel. [ 3.760054] systemd[1]: modprobe@configfs.service: Succeeded. [ 3.761697] systemd[1]: Finished Load Kernel Module configfs. [ 3.775097] fuse: init (API version 7.34) [ 3.785512] systemd[1]: Mounting Kernel Configuration File System... [ 3.802307] systemd[1]: Started File System Check Daemon to report status. [ 3.807026] systemd[1]: Finished Restore / save the current clock. [ 3.809609] systemd[1]: modprobe@fuse.service: Succeeded. [ 3.811170] systemd[1]: Finished Load Kernel Module fuse. [ 3.819173] systemd[1]: Mounting FUSE Control File System... [ 3.836911] systemd[1]: Finished Load Kernel Modules. [ 3.842957] systemd[1]: Mounted Kernel Configuration File System. [ 3.844267] systemd[1]: Mounted FUSE Control File System. [ 3.852061] systemd[1]: Starting Apply Kernel Variables... [ 3.876209] systemd[1]: modprobe@drm.service: Succeeded. [ 3.877995] systemd[1]: Finished Load Kernel Module drm. [ 3.945753] systemd[1]: Finished Apply Kernel Variables. [ 4.022261] systemd[1]: Finished File System Check on Root Device. [ 4.030239] systemd[1]: Starting Remount Root and Kernel File Systems... [ 4.130439] systemd[1]: Started Journal Service. [ 4.315377] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null). Quota mode: none. [ 4.402360] systemd-journald[134]: Received client request to flush runtime journal. [ 4.520550] systemd-journald[134]: File /var/log/journal/54ea4e12e4c442fc9b0a01df131f5092/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 6.631104] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [ 6.660847] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [ 6.664974] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [ 6.667333] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [ 6.771782] mc: Linux media interface: v0.10 [ 6.807216] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 6.809918] videodev: Linux video capture interface: v2.00 [ 6.822550] bcm2835_audio bcm2835_audio: card created with 8 channels [ 6.840920] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 6.843511] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 6.843544] [vc_sm_connected_init]: start [ 6.873520] [vc_sm_connected_init]: installed successfully [ 6.887346] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 6.895105] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 6.939364] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 6.995438] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 7.012523] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [ 7.194496] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [ 7.233972] checking generic (3e402000 7f8000) vs hw (0 ffffffffffffffff) [ 7.234000] fb0: switching to vc4 from simple [ 7.240128] Console: switching to colour dummy device 80x30 [ 7.320777] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 7.382968] Registered IR keymap rc-cec [ 7.383314] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 7.431448] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 7.440998] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input4 [ 7.495554] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 7.529990] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [ 7.545472] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 7.545526] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 7.555883] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1 [ 7.587724] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 7.587777] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 7.619197] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 7.666000] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 7.669332] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 7.687330] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 7.688828] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 7.690254] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 7.690312] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 7.690613] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 7.690642] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 7.690668] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 7.690692] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 7.690715] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 7.703054] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 7.704058] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 7.704856] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 7.711759] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 7.711795] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 7.711820] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 7.711843] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 7.711866] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 7.712258] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 7.737946] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,4-model-b.bin failed with error -2 [ 7.763282] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 7.771153] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 7.773188] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 7.791949] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [ 7.792001] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [ 7.857986] Registered IR keymap rc-cec [ 7.858694] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 7.859485] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input5 [ 7.895136] usbcore: registered new interface driver brcmfmac [ 7.984882] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 8.019215] Registered IR keymap rc-cec [ 8.019402] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 8.019684] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input6 [ 8.057801] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 8.057958] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 8.067149] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60 [ 8.116122] random: crng init done [ 8.116138] random: 7 urandom warning(s) missed due to ratelimiting [ 8.913653] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [ 9.004103] Registered IR keymap rc-cec [ 9.004372] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [ 9.004701] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input7 [ 9.035627] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.069490] Registered IR keymap rc-cec [ 9.069760] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1 [ 9.070120] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input8 [ 9.076039] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) [ 9.076963] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) [ 9.077911] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.079634] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.080052] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.080402] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.080792] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4]) [ 9.119068] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0 [ 9.222986] Console: switching to colour frame buffer device 240x67 [ 9.249632] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device [ 9.871129] 8021q: 802.1Q VLAN Support v1.8 [ 9.879789] uart-pl011 fe201000.serial: no DMA platform data [ 10.247258] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [ 10.869517] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 11.448279] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [ 11.448527] bcmgenet fd580000.ethernet eth0: Link is Down [ 11.585016] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled [ 15.593504] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [ 15.593535] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.121261] Bluetooth: Core ver 2.22 [ 21.121376] NET: Registered PF_BLUETOOTH protocol family [ 21.121387] Bluetooth: HCI device and connection manager initialized [ 21.121410] Bluetooth: HCI socket layer initialized [ 21.121423] Bluetooth: L2CAP socket layer initialized [ 21.121447] Bluetooth: SCO socket layer initialized [ 21.135159] Bluetooth: HCI UART driver ver 2.3 [ 21.135180] Bluetooth: HCI UART protocol H4 registered [ 21.135256] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 21.135495] Bluetooth: HCI UART protocol Broadcom registered [ 21.393473] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.393486] Bluetooth: BNEP filters: protocol multicast [ 21.393499] Bluetooth: BNEP socket layer initialized [ 21.405130] NET: Registered PF_ALG protocol family [ 21.423853] cryptd: max_cpu_qlen set to 1000 [ 31.833371] cam-dummy-reg: disabling