[ 0.000000] pcpu-alloc: s5536 r8192 d14944 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 63339 [ 0.000000] Kernel command line: root=31:0 ro noinitrd memsize=0xFFDD000 btab=0xc004100c btab_bootid=2 tbbt_addr=0x7d20000 board=VANT-9 console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs irqaffinity=0 console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs irqaffinity=0 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes [ 0.000000] allocated 524008 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 247272k/255404k available (3797k kernel code, 8132k reserved, 943k data, 212k init, 0k highmem) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:128 [ 0.000000] console [ttyS0] enabled [ 0.000000] Allocating memory for DSP module core and initialization code [ 0.000000] Allocated DSP module memory - CORE=0x0 SIZE=0, INIT=0x0 SIZE=0 [ 0.004000] Calibrating delay loop... 397.31 BogoMIPS (lpj=198656) [ 0.016000] pid_max: default: 32768 minimum: 301 [ 0.017000] Mount-cache hash table entries: 512 [ 0.018000] --Kernel Config-- [ 0.019000] SMP=1 [ 0.020000] PREEMPT=1 [ 0.021000] DEBUG_SPINLOCK=0 [ 0.022000] DEBUG_MUTEXES=0 [ 0.023000] Initializing cgroup subsys debug [ 0.024000] Initializing cgroup subsys memory [ 0.025000] Initializing cgroup subsys blkio [ 0.026000] Broadcom Logger v0.1 Feb 24 2018 01:40:39 [ 0.035000] CPU revision is: 0002a080 (Broadcom BMIPS4350) [ 0.035000] Primary instruction cache 64kB, VIPT, 4-way, linesfDD▒@---- PHYS STRF 400H PHYE DDR3 SIZ3 DINT USYN LSYN MFAS LMBE RACE PASS ---- Technicolor Gateway (c) 2016, All rights reserved Decompressing Bootloader................................ Gateway initialization sequence started Boot Loader Version : 2.0.94 CPU : BCM63168-D0 RAM : 256MB Flash : 128MB NAND, blocksize=128KB, pagesize=2048B Board Mnemonic : VANT-9 Market ID : FFFCExternal switch id = 53125 Booting : Bank 2 Magic packet : SW Version : 0.0.0.0.0 Starting the Linux kernel [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.11-rt19 (repowrt-builder@a807f30d4194) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r48709) ) #1 SMP PREEMPT Sat Feb 24 01:49:14 UTC 2018 [ 0.000000] VANT-9 prom init [ 0.000000] CPU revision is: 0002a080 (Broadcom BMIPS4350) [ 0.000000] Reserving WL memory core 80b8e000-8108e000, init 8108e000-810ce000 [ 0.000000] Reserving DSL memory: 010CE000-011FFFFF [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 00b8c000 @ 00002000 (usable) [ 0.000000] memory: 0eddf000 @ 01200000 (usable) [ 0.000000] Wasting 64 bytes for tracking 2 unused pages [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000002 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0000ffdf [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000002 -> 0x00000b8e [ 0.000000] 0: 0x00001200 -> 0x0000ffdf [ 0.000000] On node 0 totalpages: 63851 [ 0.000000] free_area_init_node: node 0, pgdat 804b07b0, node_mem_map 81200040 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 2924 pages, LIFO batch:0 [ 0.000000] Normal zone: 480 pages used for memmap [ 0.000000] Normal zone: 60415 pages, LIFO batch:15 [ 0.000000] PERCPU: Embedded 7 pages/cpu @81403000 s5536 r8192 d14944 u32768 [ 0.000000] pcpu-alloc: s5536 r8192 d14944 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 63339 [ 0.000000] Kernel command line: root=31:0 ro noinitrd memsize=0xFFDD000 btab=0xc004100c btab_bootid=2 tbbt_addr=0x7d20000 board=VANT-9 console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs irqaffinity=0 console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs irqaffinity=0 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes [ 0.000000] allocated 524008 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 247272k/255404k available (3797k kernel code, 8132k reserved, 943k data, 212k init, 0k highmem) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:128 [ 0.000000] console [ttyS0] enabled [ 0.000000] Allocating memory for DSP module core and initialization code [ 0.000000] Allocated DSP module memory - CORE=0x0 SIZE=0, INIT=0x0 SIZE=0 [ 0.004000] Calibrating delay loop... 397.31 BogoMIPS (lpj=198656) [ 0.016000] pid_max: default: 32768 minimum: 301 [ 0.017000] Mount-cache hash table entries: 512 [ 0.018000] --Kernel Config-- [ 0.019000] SMP=1 [ 0.020000] PREEMPT=1 [ 0.021000] DEBUG_SPINLOCK=0 [ 0.022000] DEBUG_MUTEXES=0 [ 0.023000] Initializing cgroup subsys debug [ 0.024000] Initializing cgroup subsys memory [ 0.025000] Initializing cgroup subsys blkio [ 0.026000] Broadcom Logger v0.1 Feb 24 2018 01:40:39 [ 0.035000] CPU revision is: 0002a080 (Broadcom BMIPS4350) [ 0.035000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. [ 0.035000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes [ 0.045000] Brought up 2 CPUs [ 0.054000] NET: Registered protocol family 16 [ 0.057000] Enabling watchdog [ 0.169000] Internal 1P2 VREG will be shutdown if unused...Unused, turn it off (00008885-00008882=3<300) [ 0.171000] registering PCI controller with io_map_base unset [ 0.398000] registering PCI controller with io_map_base unset [ 0.399000] gpiochip_add: registered GPIOs 0 to 51 on device: bcm963xx-gpio [ 0.415000] bio: create slab at 0 [ 0.421000] SCSI subsystem initialized [ 0.422000] usbcore: registered new interface driver usbfs [ 0.423000] usbcore: registered new interface driver hub [ 0.424000] usbcore: registered new devi ▒---- PHYS STRF 400H PHYE DDR3 SIZ3 DINT USYN LSYN MFAS LMBE RACE PASS ---- Technicolor Gateway (c) 2016, All rights reserved Decompressing Bootloader................................ Gateway initialization sequence started Boot Loader Version : 2.0.94 CPU : BCM63168-D0 RAM : 256MB Flash : 128MB NAND, blocksize=128KB, pagesize=2048B Board Mnemonic : VANT-9 Market ID : FFFCExternal switch id = 53125 Booting : Bank 2 Magic packet : SW Version : 0.0.0.0.0 Starting the Linux kernel [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.11-rt19 (repowrt-builder@a807f30d4194) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2013.05 r48709) ) #1 SMP PREEMPT Sat Feb 24 01:49:14 UTC 2018 [ 0.000000] VANT-9 prom init [ 0.000000] CPU revision is: 0002a080 (Broadcom BMIPS4350) [ 0.000000] Reserving WL memory core 80b8e000-8108e000, init 8108e000-810ce000 [ 0.000000] Reserving DSL memory: 010CE000-011FFFFF [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 00b8c000 @ 00002000 (usable) [ 0.000000] memory: 0eddf000 @ 01200000 (usable) [ 0.000000] Wasting 64 bytes for tracking 2 unused pages [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000002 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0000ffdf [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000002 -> 0x00000b8e [ 0.000000] 0: 0x00001200 -> 0x0000ffdf [ 0.000000] On node 0 totalpages: 63851 [ 0.000000] free_area_init_node: node 0, pgdat 804b07b0, node_mem_map 81200040 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 2924 pages, LIFO batch:0 [ 0.000000] Normal zone: 480 pages used for memmap [ 0.000000] Normal zone: 60415 pages, LIFO batch:15 [ 0.000000] PERCPU: Embedded 7 pages/cpu @81403000 s5536 r8192 d14944 u32768 [ 0.000000] pcpu-alloc: s5536 r8192 d14944 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 63339 [ 0.000000] Kernel command line: root=31:0 ro noinitrd memsize=0xFFDD000 btab=0xc004100c btab_bootid=2 tbbt_addr=0x7d20000 board=VANT-9 console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs irqaffinity=0 console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs irqaffinity=0 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes [ 0.000000] allocated 524008 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 247272k/255404k available (3797k kernel code, 8132k reserved, 943k data, 212k init, 0k highmem) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:128 [ 0.000000] console [ttyS0] enabled [ 0.000000] Allocating memory for DSP module core and initialization code [ 0.000000] Allocated DSP module memory - CORE=0x0 SIZE=0, INIT=0x0 SIZE=0 [ 0.004000] Calibrating delay loop... 397.31 BogoMIPS (lpj=198656) [ 0.016000] pid_max: default: 32768 minimum: 301 [ 0.017000] Mount-cache hash table entries: 512 [ 0.018000] --Kernel Config-- [ 0.019000] SMP=1 [ 0.020000] PREEMPT=1 [ 0.021000] DEBUG_SPINLOCK=0 [ 0.022000] DEBUG_MUTEXES=0 [ 0.023000] Initializing cgroup subsys debug [ 0.024000] Initializing cgroup subsys memory [ 0.025000] Initializing cgroup subsys blkio [ 0.026000] Broadcom Logger v0.1 Feb 24 2018 01:40:39 [ 0.035000] CPU revision is: 0002a080 (Broadcom BMIPS4350) [ 0.035000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes. [ 0.035000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes [ 0.045000] Brought up 2 CPUs [ 0.054000] NET: Registered protocol family 16 [ 0.057000] Enabling watchdog [ 0.169000] Internal 1P2 VREG will be shutdown if unused...Unused, turn it off (000087ea-000087e5=5<300) [ 0.171000] registering PCI controller with io_map_base unset [ 0.398000] registering PCI controller with io_map_base unset [ 0.399000] gpiochip_add: registered GPIOs 0 to 51 on device: bcm963xx-gpio [ 0.415000] bio: create slab at 0 [ 0.418000] SCSI subsystem initialized [ 0.419000] usbcore: registered new interface driver usbfs [ 0.420000] usbcore: registered new interface driver hub [ 0.421000] usbcore: registered new device driver usb [ 0.422000] PCI host bridge to bus 0000:00 [ 0.423000] pci_bus 0000:00: root bus resource [mem 0xa0f00000-0xa0ffffff] [ 0.424000] pci_bus 0000:00: root bus resource [io 0xa2000000-0xa200ffff] [ 0.425000] pci 0000:00:00.0: [14e4:435f] type 00 class 0x028000 [ 0.426000] pci 0000:00:00.0: reg 10: [mem 0x10004000-0x10005fff] [ 0.427000] pci 0000:00:09.0: [14e4:6300] type 00 class 0x0c0310 [ 0.428000] pci 0000:00:09.0: reg 10: [mem 0x10002600-0x100026ff] [ 0.429000] pci 0000:00:0a.0: [14e4:6300] type 00 class 0x0c0320 [ 0.430000] pci 0000:00:0a.0: reg 10: [mem 0x10002500-0x100025ff] [ 0.432000] PCI host bridge to bus 0000:01 [ 0.433000] pci_bus 0000:01: root bus resource [mem 0x11000000-0x11efffff] [ 0.434000] pci_bus 0000:01: root bus resource [??? 0x00000000 flags 0x0] [ 0.435000] pci 0000:01:00.0: [14e4:6326] type 01 class 0x060400 [ 0.436000] pci 0000:01:00.0: PME# supported from D0 D3hot [ 0.437000] pci 0000:01:00.0: PCI bridge to [bus 02-02] [ 0.438000] bcmhs_spi bcmhs_spi.1: master is unqueued, this is deprecated [ 0.439000] bcmleg_spi bcmleg_spi.0: master is unqueued, this is deprecated [ 0.442000] skbFreeTask created successfully [ 0.443000] gbpm_do_work scheduled [ 0.444000] BLOG v3.0 Initialized [ 0.445000] BLOG Rule v1.0 Initialized [ 0.446000] Broadcom IQoS v0.1 Feb 24 2018 01:46:46 initialized [ 0.447000] Broadcom GBPM v0.1 Feb 24 2018 01:46:46 initialized [ 0.448000] NET: Registered protocol family 8 [ 0.449000] NET: Registered protocol family 20 [ 0.450000] Switching to clocksource MIPS [ 0.455000] NET: Registered protocol family 2 [ 0.460000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.467000] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.475000] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.481000] TCP: Hash tables configured (established 8192 bind 8192) [ 0.487000] TCP: reno registered [ 0.490000] UDP hash table entries: 128 (order: 0, 4096 bytes) [ 0.496000] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes) [ 0.503000] NET: Registered protocol family 1 [ 0.507000] PCI: CLS mismatch (64 != 16), using 16 bytes [ 0.513000] bcm_tstamp initialized, (hpt_freq=200000000 2us_div=200 2ns_mult=5 2ns_shift=0) [ 0.525000] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.530000] jffs2: version 2.2 (NAND) (SUMMARY) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) © 2001-2006 Red Hat, Inc. [ 0.542000] fuse init (API version 7.18) [ 0.546000] msgmni has been set to 482 [ 0.552000] io scheduler noop registered (default) [ 0.562000] Broadcom NAND controller (BrcmNand Controller) [ 0.568000] mtd->oobsize=0, mtd->eccOobSize=0 [ 0.572000] NAND_CS_NAND_XOR=00000000 [ 0.576000] Disabling XOR: Before: SEL=40000001, XOR=00000000 [ 0.582000] Disabling XOR: After: SEL=40000000, XOR=00000000 [ 0.587000] B4: NandSelect=40000000, nandConfig=15142200, chipSelect=0 [ 0.594000] brcmnand_read_id: CS0: dev_id=2cf18095 [ 0.599000] After: NandSelect=40000000, nandConfig=15142200 [ 0.605000] Block size=00020000, erase shift=17 [ 0.609000] NAND Config: Reg=15142200, chipSize=128 MB, blockSize=128K, erase_shift=11 [ 0.618000] busWidth=1, pageSize=2048B, page_shift=11, page_mask=000007ff [ 0.625000] timing1 not adjusted: 6574845b [ 0.629000] timing2 not adjusted: 00001e96 [ 0.633000] BrcmNAND mfg 2c f1 MICRON MT29F1G08ABA 128MB on CS0 [ 0.639000] [ 0.639000] Found NAND on CS0: ACC=f7881010, cfg=15142200, flashId=2cf18095, tim1=6574845b, tim2=00001e96 [ 0.650000] BrcmNAND version = 0x0400 128MB @00000000 [ 0.656000] brcmnand_scan: B4 nand_select = 40000000 [ 0.661000] brcmnand_scan: After nand_select = 40000000 [ 0.666000] handle_acc_control: default CORR ERR threshold 6 bits [ 0.672000] ACC: 16 OOB bytes per 512B ECC step; from ID probe: 16 [ 0.679000] page_shift=11, bbt_erase_shift=17, chip_shift=27, phys_erase_shift=17 [ 0.687000] Brcm NAND controller version = 4.0 NAND flash size 128MB @18000000 [ 0.694000] ECC layout=brcmnand_oob_bch8_16_2k [ 0.699000] brcmnand_scan: mtd->oobsize=64 [ 0.703000] brcmnand_scan: oobavail=11, eccsize=512, writesize=2048 [ 0.709000] brcmnand_scan, eccsize=512, writesize=2048, eccsteps=4, ecclevel=8, eccbytes=13 [ 0.720000] Gateway flash mapping [ 0.723000] brcmnand_reset_corr_threshold: default CORR ERR threshold 6 bits for CS0 [ 0.734000] [NAND] : tBBT loaded [ 0.734000] [ 0.738000] Technicolor nand flash translation layer initialized. [ 0.744000] flash mapping initialized, size=125 Mb [ 0.750000] parse_btab: num_banks (5) [ 0.754000] Creating 1 MTD partitions on "technicolor-nand-tl": [ 0.759000] 0x000005060000-0x000007cc0000 : "rootfs" [ 0.767000] Creating 5 MTD partitions on "technicolor-nand-tl": [ 0.772000] 0x000000080000-0x000002000000 : "rootfs_data" [ 0.780000] 0x000002000000-0x000004e60000 : "bank_1" [ 0.787000] 0x000004e60000-0x000007cc0000 : "bank_2" [ 0.793000] 0x000000020000-0x000000040000 : "eripv2" [ 0.800000] 0x000000040000-0x000000080000 : "rawstorage" [ 0.807000] Creating 1 MTD partitions on "technicolor-nand-tl": [ 0.813000] 0x00000001fffd-0x000000020000 : "blversion" [ 0.824000] PPP generic driver version 2.4.2 [ 0.828000] PPP BSD Compression module registered [ 0.832000] PPP Deflate Compression module registered [ 0.838000] NET: Registered protocol family 24 [ 0.842000] brcmboard: brcm_board_init entry [ 0.847000] DYING GASP IRQ initialized [ 0.851000] Serial: BCM63XX driver $Revision: 3.00 $ [ 0.856000] Magic SysRq with Auxilliary trigger char enabled (type ^ h for list of supported commands) [ 0.866000] ttyS0 at MMIO 0xb0000180 (irq = 13) is a BCM63XX [ 0.872000] ttyS1 at MMIO 0xb00001a0 (irq = 42) is a BCM63XX [ 0.878000] Total # RxBds=1448 [ 0.881000] bcmPktDmaBds_init: Broadcom Packet DMA BDs initialized [ 0.881000] [ 0.889000] bcmPktDma_init: Broadcom Packet DMA Library initialized [ 0.895000] IPSEC SPU: SUCCEEDED [ 0.899000] GACT probability NOT on [ 0.902000] Mirror/redirect action on [ 0.906000] u32 classifier [ 0.909000] input device check on [ 0.913000] Actions configured [ 0.917000] TCP: cubic registered [ 0.920000] NET: Registered protocol family 10 [ 0.926000] IPv6 over IPv4 tunneling driver [ 0.934000] NET: Registered protocol family 17 [ 0.938000] Bridge firewalling registered [ 0.942000] Initializing MCPD Module [ 0.946000] Ebtables v2.0 registered [ 0.950000] ebt_time registered [ 0.952000] ebt_ftos registered [ 0.956000] 8021q: 802.1Q VLAN Support v1.8 [ 0.973000] VFS: Mounted root (squashfs filesystem) readonly on device 31:1. [ 0.981000] Freeing unused kernel memory: 212k freed [ 2.795000] init: Console is alive [ 7.516000] Button Hotplug driver version 0.4.1 [ 7.566000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 7.572000] PCI: Enabling device 0000:00:0a.0 (0000 -> 0002) [ 7.578000] ehci_hcd 0000:00:0a.0: setting latency timer to 64 [ 7.584000] ehci_hcd 0000:00:0a.0: EHCI Host Controller [ 7.589000] ehci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1 [ 7.597000] ehci_hcd 0000:00:0a.0: Enabling legacy PCI PM [ 7.623000] ehci_hcd 0000:00:0a.0: irq 18, io mem 0x10002500 [ 7.634000] ehci_hcd 0000:00:0a.0: USB f.f started, EHCI 1.00 [ 7.640000] hub 1-0:1.0: USB hub found [ 7.643000] hub 1-0:1.0: 2 ports detected [ 7.667000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.674000] PCI: Enabling device 0000:00:09.0 (0000 -> 0002) [ 7.679000] ohci_hcd 0000:00:09.0: setting latency timer to 64 [ 7.685000] ohci_hcd 0000:00:09.0: OHCI Host Controller [ 7.690000] ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 2 [ 7.698000] ohci_hcd 0000:00:09.0: irq 17, io mem 0x10002600 [ 7.760000] hub 2-0:1.0: USB hub found [ 7.763000] hub 2-0:1.0: 2 ports detected [ 7.780000] Initializing USB Mass Storage driver... [ 7.785000] usbcore: registered new interface driver usb-storage [ 7.791000] USB Mass Storage support registered. [ 7.809000] init: - preinit - [ 7.951000] hub 1-0:1.0: over-current condition on port 2 [ 10.375000] jffs2: notice: (253) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 100 of xref (0 dead, 0 orphan) found. switching to overlay [ 10.629000] insmod: module is already loaded - bankmgr HOMEWARE_CONFIG_ON_ACTIVE_BANK mounting overlayfs fs 1+0 records in 1+0 records out [ 12.464000] tommath: module license 'unspecified' taints kernel. [ 12.469000] Disabling lock debugging due to kernel taint [ 12.605000] eRIPv2 secrets passed correctly to Linux [ 12.741000] Dsl Annex A board [ 12.743000] Set board (VANT-9) [ 13.036000] procd: - early - [ 13.699000] procd: - watchdog - [ 13.702000] procd: - ubus - [ 14.564000] procd: - init - [ 18.246000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0 [ 18.286000] Initializing XFRM netlink socket [ 18.296000] NET: Registered protocol family 15 [ 18.308000] IPv4 over IPv4 tunneling driver [ 18.404000] L2TP core: blog_l2tp_rcv_check [ 18.408000] L2TP core driver, V2.0 [ 18.416000] L2TP netlink interface [ 18.427000] nat46: module (version 8ff2ae59ec9840a7b8b45f976c51cae80abe0226) loaded. [ 18.439000] gre: GRE over IPv4 demultiplexor driver [ 18.463000] ip_gre: GRE over IPv4 tunneling driver [ 18.505000] ip6_gre: GRE over IPv6 tunneling driver [ 18.522000] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 18.568000] ncr_master_key_set_internal [ 18.573000] ncr: driver 0.2-mr1 loaded. [ 18.583000] Netfilter messages via NETLINK v0.30. [ 18.610000] ip_set: protocol 6 [ 18.689000] bcmxtmrt: Broadcom BCM3168D0 ATM/PTM Network Device v0.7 Feb 23 2018 23:21:10 [ 18.832000] OSCK Loaded! [ 18.928000] Client Private Key Loaded! [ 18.943000] Broadcom Ingress QoS Module Char Driver v0.1 Feb 23 2018 23:17:44 Registered<243> [ 18.952000] [ 18.952000] Broadcom Ingress QoS ver 0.1 initialized [ 18.962000] BPM: tot_mem_size=268435456B (256MB), buf_mem_size <20%> =53687080B (51MB), num of buffers=20712, buf size=2592 [ 18.973000] Broadcom BPM Module Char Driver v0.1 Feb 23 2018 23:15:46 Registered<244> [ 19.513000] NBUFF v1.0 Initialized [ 19.543000] Initialized fcache state [ 19.547000] Broadcom Packet Flow Cache Char Driver v2.2 Feb 23 2018 23:17:44 Registered<242> [ 19.557000] Created Proc FS /procfs/fcache [ 19.562000] Broadcom Packet Flow Cache registered with netdev chain [ 19.569000] Broadcom Packet Flow Cache learning via BLOG enabled. [ 19.577000] [FHW] pktDbgLvl[0xc0616270]=0 [ 19.582000] [FHW] fhw_construct: [ 19.587000] Initialized Fcache HW accelerator layer state [ 19.596000] flwStatsThread created [ 19.613000] Constructed Broadcom Packet Flow Cache v2.2 Feb 23 2018 23:17:44 [ 19.677000] chipId 0x631680D0 [ 19.680000] Broadcom Forwarding Assist Processor (FAP) Char Driver v0.1 Feb 23 2018 23:17:30 Registered <241> [ 19.690000] Enabling SMISBUS PHYS_FAP_BASE[0] is 0x10c01000 [ 19.716000] FAP Soft Reset Done [ 19.719000] 4ke Reset Done [ 19.737000] Enabling SMISBUS PHYS_FAP_BASE[1] is 0x10c01000 [ 19.763000] FAP Soft Reset Done [ 19.765000] 4ke Reset Done [ 19.779000] FAP Debug values at 0xaa3a3fb0 0xa9c23fb0 [ 19.788000] fapGso_LoopBkThread created successfully [ 19.792000] Allocated FAP0 SWQ_HOST2FAP_GSO_LOOPBACK_Q mem=af234000 : 16384 bytes [ 19.800000] Allocated FAP0 SWQ_FAP2HOST_GSO_LOOPBACK_Q mem=afb14000 : 16384 bytes [ 19.807000] GSO LOOPBACK Cached HOST2FAP Q INFO: [ 19.807000] Swq =b0825ef0 qStart=af234000 qEnd=af238000 msgSize=4 dqm=18 fapId=0 [ 19.820000] GSO LOOPBACK Cached FAP2HOST Q INFO: [ 19.820000] Swq =b0825ec0 qStart=afb14000 qEnd=afb18000 msgSize=2 dqm=19 fapId=0 [ 19.832000] Allocated FAP0 SWQ_FAP2HOST_WFD_Q mem=aa230000 : 7200 bytes [ 19.839000] Allocated FAP1 SWQ_FAP2HOST_WFD_Q mem=aa206000 : 7200 bytes [ 19.846000] Allocated FAP0 SWQ_FAP2HOST_WFD_Q mem=aa824000 : 7200 bytes [ 19.853000] Allocated FAP1 SWQ_FAP2HOST_WFD_Q mem=aa208000 : 7200 bytes [ 19.860000] Allocated FAP0 TM SDRAM Queue Storage (aa3b5040) : 390144 bytes @ a9c80000 [ 19.869000] Allocated FAP1 TM SDRAM Queue Storage (a9c35040) : 390144 bytes @ a9d00000 [ 19.882000] [NTC fapProto] fapReset : Reset FAP Protocol layer [ 19.885000] [FAP0] DSPRAM : stack <0x80000000><1792>, global <0x80000700><4576>, free <1824>, total<8192> [ 19.885000] [FAP1] DSPRAM : stack <0x80000000><1792>, global <0x80000700><4576>, free <1824>, total<8192> [ 19.885000] [FAP0] PSM : addr<0x80002000>, used <24464>, free <112>, total <24576> [ 19.885000] [FAP1] PSM : addr<0x80002000>, used <24464>, free <112>, total <24576> [ 19.885000] [FAP0] DQM : availableMemory 14668 bytes, nextByteAddress 0xE00048B0 [ 19.885000] [FAP1] DQM : availableMemory 14668 bytes, nextByteAddress 0xE00048B0 [ 19.888000] [FAP0] Initializing FAP4KE GSO LOOPBACK on fapIdx=0 ... [ 19.888000] [FAP1] IC Timer started [ 19.888000] [FAP0] SWQ: HOST2FAP_GSO_LOOPBACK [ 19.888000] [FAP1] FAP4KE WFD Init Done... [ 19.889000] [FAP0] >>>>------------------ [ 19.889000] [FAP0] swq =80007ef0 msgSize =4 words , maxDepth=1024 [ 19.889000] [FAP0] qStart =af234000 qEnd=af238000 [ 19.889000] [FAP0] rdPtr =af234000 wrPtr=af234000 count=0 [ 19.889000] [FAP0] swq->interrupts 0 processed =0 dropped =0 [ 19.889000] [FAP0] Associated DQM=18 dir HOST2FAP [ 19.889000] [FAP0] ------------------<<<< [ 19.889000] [FAP0] SWQ: FAP2HOST_GSO_LOOPBACK [ 19.889000] [FAP0] >>>>------------------ [ 19.889000] [FAP0] swq =80007ec0 msgSize =2 words , maxDepth=2048 [ 19.889000] [FAP0] qStart =afb14000 qEnd=afb18000 [ 19.889000] [FAP0] rdPtr =afb14000 wrPtr=afb14000 count=0 [ 19.889000] [FAP0] swq->interrupts 0 processed =0 dropped =0 [ 19.889000] [FAP0] Associated DQM=19 dir FAP2HOST [ 19.889000] [FAP0] ------------------<<<< [ 19.890000] [FAP0] FAP4KE GSO LOOPBACK Init Done... [ 19.890000] [FAP0] IC Timer started [ 19.890000] [FAP0] FAP4KE WFD Init Done... [ 19.891000] [FAP1] FAP BPM Initialized. [ 19.892000] [FAP0] FAP BPM Initialized. [ 20.056000] Broadcom Packet Flow Cache HW acceleration enabled. [ 20.063000] fapDrv_construct: FAP0: pManagedMemory=b0820650. wastage 8 bytes [ 20.070000] fapDrv_construct: FAP1: pManagedMemory=b0a20650. wastage 8 bytes [ 20.077000] bcmPktDma_bind: FAP Driver binding successfull [ 20.083000] [FAP1] FAP TM: ON [ 20.086000] [FAP0] FAP TM: ON [ 20.125000] Broadcom BCM63168D0 Ethernet Network Device v0.1 Feb 23 2018 23:20:54 [ 20.132000] Broadcom GMAC Char Driver v0.1 Feb 23 2018 23:21:07 Registered<249> [ 20.140000] Broadcom GMAC Driver v0.1 Feb 23 2018 23:21:07 Initialized [ 20.147000] fapDrv_psmAlloc: fapIdx=1, size: 4800, offset=b0a20650 bytes remaining 7000 [ 20.155000] ETH Init: Ch:0 - 200 tx BDs at 0xb0a20650 [ 20.161000] fapDrv_psmAlloc: fapIdx=0, size: 4800, offset=b0820650 bytes remaining 7000 [ 20.169000] ETH Init: Ch:1 - 200 tx BDs at 0xb0820650 [ 20.174000] fapDrv_psmAlloc: wastage 8 bytes [ 20.178000] fapDrv_psmAlloc: fapIdx=0, size: 4808, offset=b0821910 bytes remaining 2184 [ 20.187000] ETH Init: Ch:0 - 600 rx BDs at 0xb0821910 [ 20.192000] [FAP0] enetRxChannel 0 [ 20.199000] fapDrv_psmAlloc: wastage 8 bytes [ 20.203000] fapDrv_psmAlloc: fapIdx=1, size: 4808, offset=b0a21910 bytes remaining 2184 [ 20.211000] ETH Init: Ch:1 - 600 rx BDs at 0xb0a21910 [ 20.216000] [FAP1] enetRxChannel 1 [ 20.239000] dgasp: kerSysRegisterDyingGaspHandler: bcmsw registered [ 20.271000] eth0: PHY_ID <0x20180001 : 0x01> MAC : A4:91:B1:20:1E:18 [ 20.297000] eth1: PHY_ID <0x20180002 : 0x02> MAC : A4:91:B1:20:1E:18 [ 20.341000] eth2: PHY_ID <0x20180003 : 0x03> MAC : A4:91:B1:20:1E:18 [ 20.373000] eth3: PHY_ID <0x20180004 : 0x04> MAC : A4:91:B1:20:1E:18 [ 20.391000] eth4: PHY_ID <0x0010004c : 0x0c> MAC : A4:91:B1:20:1E:18 [ 20.417000] eth5: PHY_ID <0x02600e00 : 0x00> MAC : A4:91:B1:20:1E:18 [ 20.585000] Ethernet Auto Power Down and Sleep: Enabled [ 20.601000] Chip WAN Only Port 00000000, Defined WAN Only Port 00000000, WAN Only Port Result: 0x00000000 [ 20.614000] Chip WAN Preffered Port 00000008, Defined WAN Preffered Port 00000000, WAN Preffered Port Result: 0x00000008 [ 20.625000] Chip LAN Only Port 00000000, Defined LAN Only Port 00000000, LAN Only Port Result: 0x00000000 [ 20.676000] Broadcom 802.1Q VLAN Interface, v0.1 [ 20.683000] Load wl module core 80b8e000 (size 9037) [ 20.691000] Load wl module init 8108e000 (size 2301) [ 20.702000] Wifi Forwarding Driver is initialized! [ 20.710000] Load wl module core 80b91000 (size 35745) [ 20.715000] Load wl module init 8108e000 (size 7379) [ 22.485000] Load wl module core 80b9a000 (size 4084442) [ 22.516000] Load wl module init 8108e000 (size 193169) [ 22.599000] --SMP support [ 22.601000] wl: dsl_tx_pkt_flush_len=338 [ 22.605000] wl: norm_wmark_tot=10524, pktc_wmark_tot=10524 [ 22.617000] wl 0000:00:00.0: setting latency timer to 64 [ 22.622000] wl: passivemode=1 [ 22.625000] wl0: creating kthread wl0-kthrd [ 22.651000] wl: napimode=0 [ 22.658000] Neither SPROM nor OTP has valid image [ 22.662000] wl:srom/otp not programmed, using main memory mapped srom info(wombo board) [ 22.670000] wl: ID=sb/0/ [ 22.673000] wl: ID=sb/0/ [ 22.770000] wl: loading /etc/wlan/bcm6362_map.bin [ 22.775000] srom rev:8 [ 22.855000] wl: reading /etc/wlan/bcmcmn_nvramvars.bin, file size=32 [ 22.894000] wl0: allocskbmode=1 currallocskbsz=1024 [ 22.910000] wfd_bind: Dev wl%d wfd_idx 0 Type skb configured WFD thread wfd0-thrd RxQId (20), status (0) number_of_queues 2 qmask 0x3 [ 22.923000] Instantiating WFD 0 thread [ 22.929000] +++++ Added gso loopback support for dev=wl0 <8a2bc800> [ 22.936000] wl0: Broadcom BCM435f 802.11 Wireless Controller 7.14.89.14.cpe4.16L03.0-kdb [ 22.944000] dgasp: kerSysRegisterDyingGaspHandler: wl0 registered [ 22.971000] bcmxtmcfg: bcmxtmcfg_init entry [ 23.041000] adsl: adsl_init entry [ 23.068000] PCIe: No device found - Powering down [ 23.077000] [NTC arl] arlEnable : Enabled ARL binding to FAP [ 23.083000] Broadcom Address Resolution Logic Processor (ARL) Char Driver v0.1 Feb 23 2018 23:15:45 Registered <245> [ 23.139000] nf_conntrack version 0.5.0 (3866 buckets, 15464 max) [ 23.233000] Loading PCM shim driver [ 23.461000] ufsd: trace mask set to 0000000f [ 23.464000] ufsd: driver (8.6, Feb 24 2018 01:09:40, LBD=ON, delalloc, ioctl, rwm, tr) loaded at c0f34000 [ 23.464000] NTFS support included [ 23.464000] Hfs+/HfsX support included [ 23.464000] Big endian platform [ 23.464000] optimized: size [ 23.510000] usbcore: registered new interface driver cdc_acm [ 23.515000] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 23.529000] usbcore: registered new interface driver cdc_wdm [ 23.556000] ip_tables: (C) 2000-2006 Netfilter Core Team [ 23.585000] PPPoL2TP kernel driver, V2.0 [ 23.638000] ctnetlink v0.93: registering with nfnetlink. [ 23.652000] nf_conntrack_rtsp v0.7 loading [ 23.681000] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 23.688000] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 23.737000] usbcore: registered new interface driver usbserial [ 23.742000] usbserial: USB Serial Driver core [ 23.868000] xt_time: kernel timezone is -0000 [ 23.878000] usbcore: registered new interface driver cdc_ether [ 23.893000] usbcore: registered new interface driver cdc_ncm [ 23.902000] usbcore: registered new interface driver huawei_cdc_ncm [ 23.972000] nf_nat_rtsp v0.7 loading [ 23.988000] usbcore: registered new interface driver qmi_wwan [ 24.001000] usbcore: registered new interface driver rndis_host [ 24.012000] usbcore: registered new interface driver sierra [ 24.018000] USB Serial support registered for Sierra USB modem [ 24.030000] usbcore: registered new interface driver sierra_net [ 24.075000] usbcore: registered new interface driver option [ 24.081000] USB Serial support registered for GSM modem (1-port) [ 24.093000] usbcore: registered new interface driver qcserial [ 24.099000] USB Serial support registered for Qualcomm USB modem [ 25.812000] jffs2: notice: (254) check_node_data: wrong data CRC in data node at 0x01a75d18: read 0x71eae724, calculated 0xe3ac5584. [ 37.146000] Registered led device: power:red [ 37.151000] Registered led device: power:green [ 37.157000] Registered led device: mobile:red [ 37.162000] Registered led device: mobile:green [ 37.167000] Registered led device: wireless:red [ 37.172000] Registered led device: internet:red [ 37.177000] Registered led device: mobile:blue [ 37.182000] Registered led device: internet:green [ 37.187000] Registered led device: wireless:green [ 37.192000] Registered led device: voip:red [ 37.196000] Registered led device: voip:green [ 37.203000] Registered led device: internet:orange [ 37.208000] Registered led device: wireless:orange [ 37.213000] Registered led device: voip:orange [ 37.218000] Registered led device: power:orange Note: Loading 6300 MDK (default) driver for 63168 chip Note: Forcing 53115 driver for 53125 Switch MDK: num_switches = 2 Switch MDK: unit = 0; phy_pbmp = 0x8; config_pbmp = 0x18 Switch MDK: unit = 1; phy_pbmp = 0x1e; config_pbmp = 0x3e Switch MD[ 39.845000] eth5 (Ext switch port: 5) (Logical Port: 13) Link UP 1000 mbps full duplex K link poll thread: unit=0; phypbmp=0x8 config_pbmp=0x18 Switch MDK link poll thread: unit=1; phypbmp=0x1e config_pbmp=0x3e [ 39.940000] Energy Efficient Ethernet: Enabled [ 47.506000] monitor task is initialized pid= 1201 [ 49.177000] bcmxtmcfg: DS xDSL G.inp Mode = DISABLED [ 49.181000] bcmxtmcfg: xDSL G.Fast Mode = DISABLED [ 49.187000] fapDrv_psmAlloc: fapIdx=1, size: 1600, offset=b0a22be0 bytes remaining 584 [ 49.195000] XTM Init: Ch:0 - 200 rx BDs at 0xb0a22be0 [ 49.200000] fapDrv_psmAlloc: fapIdx=1, size: 128, offset=b0a23220 bytes remaining 456 [ 49.208000] XTM Init: Ch:1 - 16 rx BDs at 0xb0a23220 [ 49.216000] bcmxtmrt: PTM/ATM Non-Bonding Mode configured in system [ 49.222000] bcmxtmcfg: Out of sequence call to XTM_ASM_HANDLER::Uninitialize(). Recovering. [ 49.231000] bcmxtmcfg: ATM Bonding configured in system. Fallback mode = Enabled [ 49.239000] bcmxtmcfg: Bonding State is DATA_IDLE [ 49.244000] bcmxtmcfg: SID MODE SET to 12 BIT MODE [ 49.249000] bcmxtmcfg: ATM Bonding Mgmt Log Area = 8f8e6d14 [ 49.254000] bcmxtmcfg: gulXtmMonitorValid(0xc0ce2dc4) = 1 [ 50.079000] bcmxtmrt: TxPAF Status = Disabled [ 50.083000] bcmxtmrt: MAC address: a4 91 b1 20 1e 18 [ 50.088000] [DoCreateDeviceReq.775]: register_netdev [ 50.100000] [DoCreateDeviceReq.780]: register_netdev done [ 50.105000] [FAP0] xtmCreateDevice : devId 0, encapType 0, headerLen 0 [ 50.111000] [FAP1] xtmCreateDevice : devId 0, encapType 0, headerLen 0 [ 50.916000] bcmxtmrt: TxPAF Status = Disabled [ 50.920000] bcmxtmrt: MAC address: a4 91 b1 20 1e 18 [ 50.928000] [DoCreateDeviceReq.775]: register_netdev [ 50.941000] [DoCreateDeviceReq.780]: register_netdev done [ 50.946000] [FAP0] xtmCreateDevice : devId 1, encapType 1, headerLen 0 [ 50.953000] [FAP1] xtmCreateDevice : devId 1, encapType 1, headerLen 0 [ 62.205000] wl_event_open [ 62.207000] wl_event_open COMPLETED Hostapd starting... (1) Hostapd starting... (2) Hostapd starting... (3) [ 65.682000] *** dslThread dslPid=1702 [ 65.685000] BcmAdsl_Initialize=0xC0D4D050, g_pFnNotifyCallback=0xC0D89760 [ 65.964000] lmemhdr[2]=0x100CE000, pAdslLMem[2]=0x100CE000 [ 65.969000] AdslCoreSetSdramImageAddr: lmem2(0xce000) vs ADSL_PHY_SDRAM_BIAS(0xce000); origAddr=0xA10CE000 newAddr=0xA10CE000 [ 65.982000] pSdramPHY=0xA11FFFF8, 0x59BF9EA7 0x7ABCF8EF [ 65.987000] *** XfaceOffset: 0x5FF90 => 0x5FF90 *** [ 66.605000] *** PhySdramSize got adjusted: 0xF5C24 => 0x129BB0 *** [ 66.611000] AdslCoreSharedMemInit: shareMemSize=33840(33840) [ 66.631000] AdslCoreHwReset: pLocSbSta=88f00000 bkupThreshold=3072 [ 66.637000] AdslCoreHwReset: AdslOemDataAddr = 0xA11B4648, time=18 ms [ 66.643000] VersionInfo: A2pv6F039x6.d26o [ 66.648000] ***BcmDiagsMgrRegisterClient: 0 *** [ 66.652000] dgasp: kerSysRegisterDyingGaspHandler: dsl0 registered [ 67.546000] [FAP0] FAP TM: ON [ 67.549000] [FAP1] FAP TM: ON [ 68.278000] [FAP0] FAP TM: ON [ 68.280000] [FAP1] FAP TM: ON [ 81.796000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 81.802000] device eth0 entered promiscuous mode [ 81.860000] ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 81.939000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 81.951000] device eth1 entered promiscuous mode [ 81.981000] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 81.988000] device eth2 entered promiscuous mode [ 82.020000] device eth5 entered promiscuous mode [ 82.024000] br-lan: port 4(eth5) entered forwarding state [ 82.030000] br-lan: port 4(eth5) entered forwarding state [ 82.040000] ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 83.008000] device wl0 entered promiscuous mode [ 83.016000] br-lan: port 5(wl0) entered forwarding state [ 83.021000] br-lan: port 5(wl0) entered forwarding state [ 84.032000] br-lan: port 4(eth5) entered forwarding state [ 85.024000] br-lan: port 5(wl0) entered forwarding state [ 98.514000] br_netlink_mcpd.c: Setting registration type 0 pid to 3066 [ 118.397000] [sched_delayed] sched: RT throttling activated [ 118.898000] eth0 (Ext switch port: 1) (Logical Port: 9) Link UP 1000 mbps full duplex [ 118.915000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 118.920000] br-lan: port 1(eth0) entered forwarding state [ 118.926000] br-lan: port 1(eth0) entered forwarding state [ 120.928000] br-lan: port 1(eth0) entered forwarding state [ 154.549000] Endpoint: endpoint_init entry [ 154.556000] Endpoint: endpoint_init COMPLETED [ 154.824000] mmConnKrnlBrcm: INIT: num_rtpsock_ctx = 42 [ 154.829000] mmConnKrnlBrcm: INIT: COMPLETED [ 164.757000] endptInitThreadFunc: Thread voice_EPINIT awakened, task:INIT [ 164.763000] BOS: Enter bosInit [ 164.767000] BOS: Exit bosInit [ 164.770000] bosTaskCreate: Task Name: aoRT Binding 0x880f8628 [ 164.776000] [ERROR xdrv_slic] slicSiLabsSetLocaleMap,690: (ts: 5 s 520ms):Set TX GAIN for country = 16: TxGain = -3, Dlp= -8 [ 164.979000] ******* DSP: Found BCM63268 ******* [ 164.983000] ******* DSP: In PCM Mode ******* [ 164.987000] ******* DSP: PCM running in 16 bit mode ******* [ 164.993000] gInterruptCounter = 0xC3448224 [ 164.998000] gInterruptErrors = 0xC3448220 [ 165.003000] gNextRxDesc = 0xC3448358 [ 165.007000] gNextTxDesc = 0xC344835C [ 165.012000] gDectTestMode = 0xc344836c [ 165.017000] dectBuffStart = 0xc3448360 [ 165.023000] gDectRxOutOfSyncCounter = 0xc3448380 [ 165.027000] gDectTxOutOfSyncCounter = 0xc3448384 [ 165.032000] 32 ms ECAN tail-length [ 165.035000] *** gStartRxDesc[0] = 0xA8F4B000 [ 165.040000] *** gBufferSizeBytes = 640 [ 165.044000] *** gStartTxDesc[0] = 0xA8F4B7D0 [ 165.048000] halPcmInit 367 nextTxDesc = 0xA8F4B7D0 [ 165.053000] halPcmInit 367 nextTxDesc = 0xA8F4B7D8 [ 165.058000] halPcmInit 371 Ownership for TX desc not set. Use this buffer. [ 165.068000] bosTaskCreate: Task Name: HTSK Binding 0x880293e8 [ 166.964000] boardHalInit completed [ 166.967000] bosTaskCreate: Task Name: HRTBEAT Binding 0x88028168 [ 166.975000] bosTaskCreate: Task Name: VRGDISP Binding 0x882b8f88 [ 166.983000] bosTaskCreate: Task Name: HCAS Binding 0x88028608 [ 166.998000] bosTaskCreate: Task Name: ISTW Binding 0x882b98c8 [ 167.004000] DSP: Interrupt Ids [ 167.007000] --------------- [ 167.010000] InterruptId/Location = 42/HIGH [ 167.015000] [ 167.015000] DSP: Interrupt Masks [ 167.019000] --------------- [ 167.022000] IrqMask = 0x00000000 [ 167.027000] IrqMaskLow = 0x83806680 [ 167.032000] IrqMask1 = 0x00000400 [ 167.037000] IrqMaskLow1 = 0x00000020 [ 167.042000] [ 167.042000] DSP: Interrupt Status [ 167.047000] ----------------- [ 167.050000] IrqStatus = 0x00100000 [ 167.055000] IrqStatusLow = 0x00038100 [ 167.060000] IrqStatus1 = 0x00100000 [ 167.065000] IrqStatusLow1 = 0x00038100 [ 167.733000] EndpointInit completed [ 167.736000] dgasp: kerSysRegisterDyingGaspHandler: endpoint registered [ 167.813000] [ERROR ept] ProvisionRingParams,3171: (ts: 8 s 558ms):Ring offset of 25 not supported. Using default of 25 V for endpt 1 [ 167.888000] [ERROR ept] ProvisionRingParams,3171: (ts: 8 s 633ms):Ring offset of 25 not supported. Using default of 25 V for endpt 0