Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
Prusa Mendel derivative. This is a working title.

Failed to load latest commit information.
bin y-motor-end changes i forgot to commit a long time ago
lib Lots of work. Nearly at release candidate.
.gitignore ignore bin and build
.gitmodules fix submodule, it needs to point to the hacklabto fork
Makefile fixed name changes
README Added submodule pull instructions for MCAD dependencies.
bar-clamp.scad Adding initial files
bearing-pulley.scad Lots of work. Nearly at release candidate.
belt-clamp.scad Adding initial files
common.scad New z-motor-mount design puts the diagonal bars at the middle on the …
configuration.scad as the x-idler-motor is about 65 mm high, the default should be able …
constants.scad added missing constants.scad file
coupling.scad New 2 peice motor/leadscrew shaft coupler with zip ties and better sh…
endstop-holder.scad Adding endstops
makerbot.scad Merge https://github.com/clothbot/PrusaMendel
partlist.scad Adds partlist file. Compiles to give partlist. WIP
pla-bushing.scad Fixed spacing for different diameters
plate1.scad Converted production plates to new raft type
prusalogo.scad Fixed use syntax to match lib/mcad relative path.
rod-clamp.scad Added rod clamp
sanity_check.scad Somehow anity check didn't get added when it was supposed to.
vertex.scad Lots of work. Nearly at release candidate.
vertexstack.scad New raft type
vertical-bar-clamp.scad Lots of work. Nearly at release candidate.
x-carriage-mendel.scad Misc improvements.
x-carriage-mini.scad added a new experimental (untested) x-carriage-mini for use with Ulti…
x-carriage.scad x-end-idler is fixed. Yay!
x-end-idler.scad Lots of work. Nearly at release candidate.
x-end-motor.scad Lots of work. Nearly at release candidate.
y-carriage-abp.scad Lots of work. Nearly at release candidate.
y-carriage-bushings.scad Lots of work. Nearly at release candidate.
y-carriage.scad y-carriage added for ABPs and frame vertex redesign for angle configu…
y-end-motor-leadscrew.scad cleaning up, missed files in an earlier commit
y-end-motor.scad y-motor-end changes i forgot to commit a long time ago
y-slider-better.scad Adding initial files
z-motor-mount.scad Cut z-motor-mount for easier assembly.

README

Prusa Mendel

Please read http://reprap.org/wiki/Hacklab_RepRap before attempting to build this.

When checking out from git, run the following to check out the MCAD dependencies:
	git submodule init
	git submodule update

Frame vertexes are based on Viks and Tonokips ones

Prusa Mendel part list:

To print:

6x frame-vertex
2x coupling
3x endstop-holder
1x x-carriage
1x x-end-idler
1x x-end-motor
2x z-motor-mount
4x belt-clamp
8x bar-clamp
2x rod-clamp
1x y-motor-bracket
2x pulley

3x pla-bushing

The Mendel build plate contains all the parts except the pla bushings



Vitamins required:

5/16 threaded rods - Measure these by assembling your parts to the build size you need and then figure out how long the rods need to be. (this sucks i know.. it's beta ;)
5/16 smooth rods - same
5/16 nuts - allot? I'd say 50-75?
some zip ties
teflon bushings
screws for your motors
4x nema 17 stepper motors
2x XXmm x 5mm T5 pitch timing belt
Something went wrong with that request. Please try again.