Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
Browse files

Added ultra fine profile and updated standard for use with blue trans…

…parent PLA
  • Loading branch information...
commit 0c5473ca8b43b7f5a7e226bd8d0a0956c6dde728 1 parent 29cd61c
@Fumon Fumon authored
Showing with 106 additions and 4 deletions.
  1. +3 −1 README.md
  2. +3 −3 hacklab_standard.ini
  3. +100 −0 hacklab_ultra_fine.ini
View
4 README.md
@@ -1,4 +1,6 @@
Ultimaker_Cura_Profile
======================
-Cura profile customized for the hacklab Ultimaker
+Cura profile customized for the hacklab Ultimaker
+
+Ultra Fine profile is currently extremely experimental
View
6 hacklab_standard.ini
@@ -8,7 +8,7 @@ swap_xz = False
swap_yz = False
model_scale = 1
model_rotate_base = 0
-filament_diameter = 2.75
+filament_diameter = 2.64
nozzle_size = 0.4
layer_height = 0.2
wall_thickness = 0.8
@@ -16,8 +16,8 @@ solid_layer_thickness = 0.6
fill_density = 20
skirt_line_count = 2
skirt_gap = 3.0
-print_speed = 100
-print_temperature = 218
+print_speed = 90
+print_temperature = 220
support = None
enable_raft = False
filament_density = 1.00
View
100 hacklab_ultra_fine.ini
@@ -0,0 +1,100 @@
+[profile]
+machine_center_x = 100
+machine_center_y = 100
+flip_x = False
+flip_y = False
+flip_z = False
+swap_xz = False
+swap_yz = False
+model_scale = 1
+model_rotate_base = 0
+filament_diameter = 2.64
+nozzle_size = 0.4
+layer_height = 0.1
+wall_thickness = 1.2
+solid_layer_thickness = 0.6
+fill_density = 0
+skirt_line_count = 2
+skirt_gap = 1.5
+print_speed = 100
+print_temperature = 220
+support = None
+enable_raft = False
+filament_density = 1.00
+retraction_min_travel = 5.0
+retraction_speed = 40.0
+retraction_amount = 2.0
+retraction_extra = 0.0
+travel_speed = 170
+max_z_speed = 3.0
+bottom_layer_speed = 50
+cool_min_layer_time = 5
+fan_enabled = True
+bottom_thickness = 0.3
+enable_skin = True
+extra_base_wall_thickness = 0.0
+cool_min_feedrate = 10
+fan_layer = 1
+fan_speed = 100
+fan_speed_max = 100
+raft_margin = 5
+raft_base_material_amount = 100
+raft_interface_material_amount = 100
+support_rate = 50
+support_distance = 0.5
+infill_type = Line
+solid_top = True
+fill_overlap = 15
+bridge_speed = 60
+sequence = Loops > Perimeter > Infill
+force_first_layer_sequence = True
+joris = False
+retract_on_jumps_only = True
+enable_dwindle = True
+dwindle_pent_up_volume = 0.7
+dwindle_slowdown_volume = 5.0
+
+[alterations]
+start.gcode = ;Sliced {filename} at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ M92 X79.1359 Y79.1359 Z492.307 E933.3940
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G92 X0 Y0 Z0 E0 ;reset software position to front/left/z=0.0
+ G1 Z15.0 F{max_z_speed} ;move the platform down 15mm
+ G92 E0 ;zero the extruded length
+ G1 F200 E3 ;extrude 3mm of feed stock
+ G92 E0 ;zero the extruded length again
+ ;go to the middle of the platform (disabled, as there is no need to go to the center)
+ ;G1 X{machine_center_x} Y{machine_center_y} F{travel_speed}
+ G1 F{travel_speed}
+end.gcode = ;End GCode
+ M104 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+replace.csv =
+support_end.gcode =
+nextobject.gcode = ;Move to next object on the platform. clear_z is the minimal z height we need to make sure we do not hit any objects.
+ G92 E0
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 F{travel_speed} ;move Z up a bit and retract filament even more
+ G90 ;absolute positioning
+ G1 Z{clear_z} F{max_z_speed}
+ G92 E0
+ G1 X{machine_center_x} Y{machine_center_y} F{travel_speed}
+ G1 F200 E5
+ G92 E0
+support_start.gcode =
+
Please sign in to comment.
Something went wrong with that request. Please try again.