Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
Browse files

Updated for green PLA from Voxel

  • Loading branch information...
commit c83b1f2c002bdfe8f46c38f26e1b715b08231aa4 1 parent 8acc3e6
@Fumon Fumon authored
View
4 hacklab_standard.ini
@@ -8,12 +8,12 @@ swap_xz = False
swap_yz = False
model_scale = 1
model_rotate_base = 0.0
-filament_diameter = 2.64
+filament_diameter = 3.05
nozzle_size = 0.40
layer_height = 0.2
wall_thickness = 0.8
solid_layer_thickness = 0.6
-fill_density = 20
+fill_density = 10
skirt_line_count = 2
skirt_gap = 3.0
print_speed = 90
View
2  hacklab_standard_retraction.ini
@@ -8,7 +8,7 @@ swap_xz = False
swap_yz = False
model_scale = 1
model_rotate_base = 0.0
-filament_diameter = 2.64
+filament_diameter = 3.05
nozzle_size = 0.40
layer_height = 0.2
wall_thickness = 0.8
View
104 hacklab_standard_retraction_hollow.ini
@@ -0,0 +1,104 @@
+[profile]
+machine_center_x = 100
+machine_center_y = 100
+flip_x = False
+flip_y = False
+flip_z = False
+swap_xz = False
+swap_yz = False
+model_scale = 1.0
+model_rotate_base = 0
+filament_diameter = 3.05
+nozzle_size = 0.40
+layer_height = 0.2
+wall_thickness = 0.8
+solid_layer_thickness = 0.6
+fill_density = 0
+skirt_line_count = 2
+skirt_gap = 3.0
+print_speed = 90
+print_temperature = 220
+support = None
+enable_raft = False
+filament_density = 1.00
+retraction_min_travel = 5.0
+retraction_speed = 60.0
+retraction_amount = 3.0
+retraction_extra = 0.0
+travel_speed = 170
+max_z_speed = 3.0
+bottom_layer_speed = 30
+cool_min_layer_time = 3
+fan_enabled = True
+bottom_thickness = 0.3
+enable_skin = False
+extra_base_wall_thickness = 0.0
+cool_min_feedrate = 10
+fan_layer = 1
+fan_speed = 100
+fan_speed_max = 100
+raft_margin = 5
+raft_base_material_amount = 100
+raft_interface_material_amount = 100
+support_rate = 50
+support_distance = 0.5
+infill_type = Grid Hexagonal
+solid_top = True
+fill_overlap = 15
+bridge_speed = 100
+sequence = Loops > Perimeter > Infill
+force_first_layer_sequence = True
+joris = False
+retract_on_jumps_only = True
+enable_dwindle = True
+dwindle_pent_up_volume = 0.7
+dwindle_slowdown_volume = 5.0
+retraction_enable = True
+plugin_config = (lp1
+ .
+hop_on_move = False
+
+[alterations]
+start.gcode = ;Sliced {filename} at: {day} {date} {time}
+ ;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ M92 X79.1359 Y79.1359 Z492.307 E810.0
+ G21 ;metric values
+ G90 ;absolute positioning
+ M107 ;start with the fan off
+ G28 X0 Y0 ;move X/Y to min endstops
+ G28 Z0 ;move Z to min endstops
+ G92 X0 Y0 Z0 E0 ;reset software position to front/left/z=0.0
+ G1 Z15.0 F{max_z_speed} ;move the platform down 15mm
+ G92 E0 ;zero the extruded length
+ G1 F200 E3 ;extrude 3mm of feed stock
+ G92 E0 ;zero the extruded length again
+ ;go to the middle of the platform (disabled, as there is no need to go to the center)
+ ;G1 X{machine_center_x} Y{machine_center_y} F{travel_speed}
+ G1 F{travel_speed}
+end.gcode = ;End GCode
+ M104 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+replace.csv =
+support_end.gcode =
+nextobject.gcode = ;Move to next object on the platform. clear_z is the minimal z height we need to make sure we do not hit any objects.
+ G92 E0
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 F{travel_speed} ;move Z up a bit and retract filament even more
+ G90 ;absolute positioning
+ G1 Z{clear_z} F{max_z_speed}
+ G92 E0
+ G1 X{machine_center_x} Y{machine_center_y} F{travel_speed}
+ G1 F200 E5
+ G92 E0
+support_start.gcode =
+
Please sign in to comment.
Something went wrong with that request. Please try again.