Permalink
Switch branches/tags
Nothing to show
Commits on Aug 17, 2011
  1. add HID_ORTEK to default defconfig

    John E. Connolly committed Aug 17, 2011
Commits on Aug 12, 2011
  1. cleanup of Ortek commit for 2.6.35

    John E. Connolly committed Aug 12, 2011
Commits on Aug 11, 2011
  1. HID: add support for Skycable 0x3f07 wireless presenter

    This device contains the very same bug in report descriptor as the
    Ortek ones do (i.e. LogicalMinimum == 1, which is wrong for the key
    array).
    
    As we have more reports for the Ortek devices, we are keeping the driver
    name for now. Apparently there is a chip producer which sells chip with
    this buggy descriptor to multiple vendors. Thus if such reports start
    to come at highger frequency, we'll either have to rename the driver
    accordingly, or come up with more generic workaround.
    
    Signed-off-by: Jiri Kosina <jkosina@suse.cz>
    Jiri Kosina committed with John E. Connolly Mar 21, 2011
Commits on Aug 1, 2011
  1. Fix input event generation for jacks and volume knobs.

    The previous version did not actually work.
    
    With this patch, the driver generates keyboard input events
    (KEY_VOLUMEUP and KEY_VOLUMEDOWN) for the volume buttons.  The jacks
    are reported as switches (Line in: SW_JACK_PHYSICAL_INSERT, Mic in:
    SW_MICROPHONE_INSERT, Line out: SW_LINEOUT_INSERT, Headphones:
    SW_HEADPHONE_INSERT).
    committed with Matt Isaacs Jul 29, 2011
  2. oh my, the clock used really is CORE_96M_FCLK

    ... but that also explains why 8000 kHz sample rate does not work.
    Added a check to make sure that the clock divisor is in range.
    committed with Matt Isaacs Jul 28, 2011
  3. clean up white space, remove unused code

    committed with Matt Isaacs Jul 27, 2011
  4. Fix clocking of bmi_audio_driver

    Previously, the bmi_audio driver generated audio only on one channel.
    This was a result of the fact that the bit clock to frame clock ratio
    was wrong.
    
    Due to hardware constraints, the I2S port must be clocked by McBSP, and
    the clock must be derived from the 48Mhz functional clock.  This patch
    changes clock generation and clock divisor calculation so that (almost)
    the right bit clock is generated.
    committed with Matt Isaacs Jul 27, 2011
Commits on Jul 21, 2011
  1. bugduino is well tested, adding to buglabs defconfig

    Far McKon committed Jul 21, 2011
Commits on Jul 12, 2011
  1. cleaned up device table a bit for readability

    Far McKon committed with haveahennessy Jul 11, 2011
  2. updated device table. Still tweaking. figured out how to get MODULE_A…

    …LIAS generated
    Far McKon committed with haveahennessy Jul 11, 2011
  3. added bugduino module coe to the kernel build

    Far McKon committed with haveahennessy Jul 1, 2011
Commits on Jun 20, 2011
  1. NAND partition size fixes for Bug Labs Base.

    Signed-off-by: Matt Isaacs <izzy@buglabs.net>
    Matt Isaacs committed Jun 20, 2011
Commits on Jun 17, 2011
  1. NAND initialization fixes for Bug Labs Base.

    Signed-off-by: Matt Isaacs <izzy@buglabs.net>
    Matt Isaacs committed Jun 17, 2011
Commits on Jun 9, 2011
  1. added extended EDID info to sysfs entries vga_edid and dvi_edid for d…

    …ebugging monitor problems
    Far McKon committed with haveahennessy May 31, 2011
Commits on May 27, 2011
  1. BMI: Keep present PIM powered, even if invalid EEPROM is encountered.

    Signed-off-by: Matt Isaacs <izzy@buglabs.net>
    Matt Isaacs committed May 27, 2011
Commits on May 23, 2011
  1. change USB_SUSPEND=y to =N.

    John E. Connolly committed May 23, 2011
  2. add CDC and ACM to default defconfig (builtin)

    John E. Connolly committed May 23, 2011
  3. change BUG_DOCK=y to =N.

    John E. Connolly committed May 23, 2011
Commits on May 17, 2011
  1. Changed vga/dvi enable to always fallback to defaults if EDID is erro…

    …nous, rather than relying on a force-fallback flag.
    Far McKon committed with Matt Isaacs May 17, 2011
  2. BMI Slot management fixes.

    Ensure Slots are powered off when empty.
    Slots are now power cycled on reboot.
    
    Signed-off-by: Matt Isaacs <izzy@buglabs.net>
    Matt Isaacs committed May 17, 2011
  3. Corrected SPI clock for SC16IS762 on Bug Labs Base.

    Signed-off-by: Matt Isaacs <izzy@buglabs.net>
    Matt Isaacs committed May 16, 2011
Commits on May 16, 2011
  1. some defconfig tweaks following defconfig review.

    John E. Connolly committed May 16, 2011
  2. libertas spurious tx timeout fix.

    Matt Isaacs committed May 16, 2011
Commits on May 10, 2011
  1. Support for revised Bug Labs Video Module hardware.

    Support for EDID monitor data. Fixed EEPROM-EDID I2C Address conflict. New Documentation.
    
    Far McKon <FarMcKon@buglabs.net>
    Signed-off-by: Matt Isaacs <haveahennessy@gmail.com>
    haveahennessy committed May 10, 2011
  2. TFP410 Reset fixes.

    Signed-off-by: Matt Isaacs <haveahennessy@gmail.com>
    haveahennessy committed May 10, 2011
  3. THS8200 Dispaly output fixes.

    Improved init sequence fixes timing and colour issues. Some Timing probelems remain, possibly due to limited granularity in DSS clock division/selection.
    
    Signed-off-by: Matt Isaacs <haveahennessy@gmail.com>
    haveahennessy committed May 10, 2011
  4. Framebuffer mods for working with EDID and video modes via bmi_video.

    Added fb_eidd_show to fbmon.c to print out edid stats.
    Exported fb_do_probe_ddc_edid and fb_delete_videomode.
    
    Author: Far McKon <FarMcKon@buglabs.net>
    Signed-off-by: Matt Isaacs <haveahennessy@gmail.com>
    haveahennessy committed May 10, 2011
  5. Added snprintfcat to vsprintf.c

    Author: Far McKon <FarMcKon@buglabs.net>
    Signed-off-by: Matt Isaacs <haveahennessy@gmail.com>
    haveahennessy committed May 10, 2011
Commits on May 9, 2011
Commits on May 5, 2011
Commits on May 3, 2011
Commits on Apr 29, 2011
  1. defconfig, remove dummy interface from default defconfig.

    John E. Connolly committed Apr 29, 2011
  2. Merge branch 'buglabs' of github.com:/buglabs/bug20-2.6.35-linaro int…

    …o buglabs
    Matt Isaacs committed Apr 29, 2011
  3. Enable frame pointers for ftrace on Bug Labs base.

    Signed-off-by: Matt Isaacs <izzy@buglabs.net>
    Matt Isaacs committed Apr 29, 2011