diff --git a/platformio.ini b/platformio.ini
index f03d18e68..d120dc1aa 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -93,8 +93,6 @@ build_flags =
 	-DHOYMILES_PIN_CS=5
 	-DVICTRON_PIN_TX=21
 	-DVICTRON_PIN_RX=22
-monitor_port = /dev/cu.usbserial-01E68DD0
-upload_port = /dev/cu.usbserial-01E68DD0
 
 [env:wt32_eth01]
 ; http://www.wireless-tag.com/portfolio/wt32-eth01/
diff --git a/platformio_override.ini b/platformio_override.ini
index 03996e141..481552400 100644
--- a/platformio_override.ini
+++ b/platformio_override.ini
@@ -14,8 +14,9 @@
 ; Under Linux, the ports are in the format /dev/tty***, typically /dev/ttyUSB0
 ; To look up the port, execute ls /dev/tty*, then connect the device
 ; then execute ls /dev/tty* again and check which device was added
-monitor_port = COM4
-upload_port = COM4
+;monitor_port = COM4
+;upload_port = COM4
+
 
 
 ; you can define your personal board and/or settings here