autoload prevents pagination

[dissofiddle]

I am using internal helgobox parameter (p0)
with "when bank selected" to activate/deactivate mapping groups

When auto-load is on (based on unit fx), pages don't work any more

[helgoboss]

The parameters reset after auto-loading a different preset. Is that what you mean?

[dissofiddle]

No,
I mean that if auto-load function is on,For some reason, the buttons dedicated to change the parameter p0, and therefore other mappings doesn't work.

For instance one of my button is a "shift" function that set p0 to 1, and change every other button functionalities, which is a normal usage for realearn. It works normally, but if I engage the "autoload", this stops to work

[dissofiddle]

Being even more precise :
I have a "daw preset" and several "fx preset"
Even when no fx is focused to work, the daw preset actually doesn't work when autoload is engaged in realearn, specifically the "pages" (shift etc) functionality doesn't work.
However if autoload is disengaged, and only daw preset is loaded, then it works

[helgoboss]

I just tested this (with 2.18.0-pre.1). Conditional activation kept working even with Auto-load enabled.

Can you build a minimal example (RPP project, nothing complicated) that shows that it doesn't work?

[dissofiddle]

Ok so, realearn behaviour is even weirder than I though here I share 2 videos :

…

-The first one shows that feedback works when on monitoring fx, but not on a normal reaper track - the second one show that using autoload breaks the mapping auto_load_breaks_all.mp4 <https://drive.google.com/open?id=1xcKOYatRgaXmQAar5cIvHc0QPYcQJOJp> only_on_monitoring.mp4 <https://drive.google.com/open?id=1tncHlf4fl4mU6Xhdm8TrToh3VPz_uMCH> Le dim. 19 janv. 2025, 21:25, Benjamin Klum ***@***.***> a écrit :

I just tested this (with 2.18.0-pre.1). Conditional activation kept working even with Auto-load enabled. Can you build a *minimal* example (RPP project, nothing complicated) that shows that it doesn't work? — Reply to this email directly, view it on GitHub <#1415 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AUIIJKJP2K6HKHRMAAJXJGD2LQCZXAVCNFSM6AAAAABVO3WKIWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMBRGAYDQOBZHE> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[helgoboss]

You didn't make the videos public, I can't access them.

A minimal RPP would be better. I need to be able to reproduce it, otherwise there's no way to solve it.

[dissofiddle]

Sorry, Now they are public. I am ok to make the minimal .rpp, but I have very much difficulties to do so as a lot of things appears to be very buggy now on my system and I can't find the reasons Le mer. 22 janv. 2025 à 19:35, Benjamin Klum ***@***.***> a écrit :

…

You didn't make the videos public, I can't access them. A minimal RPP would be better. I need to be able to reproduce it, otherwise there's no way to solve it. — Reply to this email directly, view it on GitHub <#1415 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AUIIJKPXY3HGJT7V62SWMOT2L7QHJAVCNFSM6AAAAABVO3WKIWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMBXHE4DQNJQHE> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[helgoboss]

I had a look at the videos but I can't do anything since I have no idea what mappings you are using, what FX-to-preset links you have, etc.

I'm afraid there's no way around making a minimal example. My advice: Start with a new portable REAPER installation, go minimal and add things until you can reproduce that ReaLearn issue yourself. Then send me that portable REAPER installation and the example project.

[dissofiddle]

The thing, is because of the bug, I can't even reproduce a normal mapping with the device (feedback don't work as it used too, so I can't event be sure i am doing a right example) I can however send you the full mappings I am using. It is pretty straight forward : the "mode" mapping group contains the buttons that activate conditionnal switch, all other mapping groups use conditionnal activation with bank Le mer. 22 janv. 2025 à 20:28, Benjamin Klum ***@***.***> a écrit :

…

I had a look at the videos but I can't do anything since I have no idea what mappings you are using, what FX-to-preset links you have, etc. I'm afraid there's no way around making a minimal example. My advice: Start with a new portable REAPER installation, go minimal and add things until you can reproduce that ReaLearn issue yourself. Then send me that portable REAPER installation and the example project. — Reply to this email directly, view it on GitHub <#1415 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AUIIJKISIERLX6UESILCR6D2L7WNBAVCNFSM6AAAAABVO3WKIWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMBYGA4TCNJXGY> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[dissofiddle]

OK I have found out that some options were problematic such as "make instance superior" and send "feedback only when track is armed" my bad on the feed back part (these options are mistaking) I will be able to produce a minimal example then. I do it now and send it to you Le mer. 22 janv. 2025 à 20:48, baldwin dumortier ***@***.***> a écrit :

…

The thing, is because of the bug, I can't even reproduce a normal mapping with the device (feedback don't work as it used too, so I can't event be sure i am doing a right example) I can however send you the full mappings I am using. It is pretty straight forward : the "mode" mapping group contains the buttons that activate conditionnal switch, all other mapping groups use conditionnal activation with bank Le mer. 22 janv. 2025 à 20:28, Benjamin Klum ***@***.***> a écrit : > I had a look at the videos but I can't do anything since I have no idea > what mappings you are using, what FX-to-preset links you have, etc. > > I'm afraid there's no way around making a minimal example. My advice: > Start with a new portable REAPER installation, go minimal and add things > until you can reproduce that ReaLearn issue yourself. Then send me that > portable REAPER installation and the example project. > > — > Reply to this email directly, view it on GitHub > <#1415 (comment)>, > or unsubscribe > <https://github.com/notifications/unsubscribe-auth/AUIIJKISIERLX6UESILCR6D2L7WNBAVCNFSM6AAAAABVO3WKIWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMBYGA4TCNJXGY> > . > You are receiving this because you authored the thread.Message ID: > ***@***.***> >

[helgoboss]

BTW, in the video I can see that you don't set the preset to "None" before activating auto-load. This will make the current preset the fallback preset. Not sure if this is desired.

[dissofiddle]

Here is the minimal example. realearn is on track 1 With main mapping : - One button is a switch, the other does solo when the switch is off, and mute when it's on There 's another maping linked to ReaEQ, for autoload there's also a mapping to ReaEQ, that just move the filter cutoff When autoload is set, the switch does not work and the other button always solo and never mutes Le mer. 22 janv. 2025 à 20:58, baldwin dumortier ***@***.***> a écrit :

…

OK I have found out that some options were problematic such as "make instance superior" and send "feedback only when track is armed" my bad on the feed back part (these options are mistaking) I will be able to produce a minimal example then. I do it now and send it to you Le mer. 22 janv. 2025 à 20:48, baldwin dumortier ***@***.***> a écrit : > The thing, is because of the bug, I can't even reproduce a normal mapping > with the device (feedback don't work as it used too, so I can't event be > sure > i am doing a right example) > I can however send you the full mappings I am using. > > It is pretty straight forward : the "mode" mapping group contains the > buttons that activate conditionnal switch, all other mapping groups use > conditionnal activation > with bank > > Le mer. 22 janv. 2025 à 20:28, Benjamin Klum ***@***.***> > a écrit : > >> I had a look at the videos but I can't do anything since I have no idea >> what mappings you are using, what FX-to-preset links you have, etc. >> >> I'm afraid there's no way around making a minimal example. My advice: >> Start with a new portable REAPER installation, go minimal and add things >> until you can reproduce that ReaLearn issue yourself. Then send me that >> portable REAPER installation and the example project. >> >> — >> Reply to this email directly, view it on GitHub >> <#1415 (comment)>, >> or unsubscribe >> <https://github.com/notifications/unsubscribe-auth/AUIIJKISIERLX6UESILCR6D2L7WNBAVCNFSM6AAAAABVO3WKIWVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDMMBYGA4TCNJXGY> >> . >> You are receiving this because you authored the thread.Message ID: >> ***@***.***> >> >

[helgoboss]

I don't see any files. I think you need to attach them directly at GitHub.