002: HW Validation List

KaiGai Kohei edited this page Sep 25, 2018 · 6 revisions

Summary

This note shares the list of validated hardware configurations. Note that our open source community never guarantee it works fine. This list just informs you the following hardware configuration passed the validation test sponsored by the provider. Please contact to the provider for shipping availability and commercial support.

Hardware Validation List

This section shows a list of complete systems which we have validated.

SuperServer SYS-1019GP-TT

Component List:

Type Parts Name # of items Memo
Barebone SYS-1019GP-TT 1 1U Rack Server
CPU Intel Xeon Gold 6126T 1 12C,24HT,2.6GHz
RAM DDR4-2666 32GB DIMM 6 192GB in total
GPU NVIDIA Tesla P40 1 3840C, 24GB, Pascal
SSD Intel DC P4600 3 2.0TB, HHHL
HDD SATA 2.0TB (2.5inch; 7.2krpm) 6
N/W Built-in 10Gb ethernet 2
  • Installation Note
    • NVIDIA Tesla P40 GPU is installed on the left PCIe slot (x16) from the rear.
    • Intel DC P4600 SSDs are installed on the center PCIe slot (x16), right upper/lower PCIe slot (x8) (by riser card) from the rear.
  • Provider Info

Software Support List

General Requirement

  • Operating System
    • Red Hat Enterprise Server 7.3 or later (x86_64)
    • CentOS 7.3 or later (x86_64)
  • CUDA Toolkit
    • NVIDIA CUDA Toolkit 9.2
  • PostgreSQL
    • PostgreSQL v9.6.x
    • PostgreSQL v10.x

FYI: NVMe-SSD models which we had run

This section shows a list of NVMe-SSD systems which we have tested in the past.

Vendor Model Form Capacity SeqRead [MB/s] PCIe Spec Memo
Intel 750 SSD HHHL 400GB 2200MB/s PCIe 3.0 x4
Samsung PRO 960SSD M.2 512GB 3500MB/s PCIe 3.0 x4 using carrier board
HGST SN260 HHHL 7.6TB 6100MB/s PCIe 3.0 x8
Intel DC P4600 HHHL 2.0TB 3200MB/s PCIe 3.0 x4
You can’t perform that action at this time.
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.
Press h to open a hovercard with more details.