# CC3000

Running the CC3000 driver under this one, configured by hand.

Generated by `tools/build_drivers.py` from the driver as installed on the machine that
ran it. Do not edit by hand.

> **There is a web interface for all of this.** It is on by default, and the driver
> prints its address when WeeWX starts:
>
> ```
> INFO user.ultimatepush.driver: The web interface is at
> http://1.2.3.4:8080/?token=abcdefg12345
> ```
>
> Everything on this page can be done there instead, and one thing is much easier:
> deciding which reading goes into which database column. See
> [Web interface](Web-interface).

## What it is

Driver for CC3000 data logger
http://www.rainwise.com/products/attachments/6832/20110518125531.pdf

## The smallest configuration that works

```ini
[Station]
    station_type = UltimatePush

[UltimatePush]
    driver = user.ultimatepush.driver

    [[hardware]]
        station_types = CC3000

        [[[CC3000]]]
            role = main

[CC3000]
    driver = weewx.drivers.cc3000
    port = /dev/ttyUSB0
```

The `[CC3000]` section belongs to that driver and is read by it, exactly as it would be
if it were the only driver WeeWX ran, so `weectl device` keeps working on it. What goes
under `[[hardware]]` belongs to this one: see [Hosted hardware](Hosted-hardware).

## Finding the port

The console is on a serial port, which on most machines is a USB-to-serial adapter.
The name to put in `port` is whichever device it appears as.

List them with:

```bash
ls -l /dev/serial/by-id/
```

Use the name under `by-id` rather than `/dev/ttyUSB0`. It is made from the adapter's
own manufacturer and serial number, so it stays the same after a reboot and after
something else is plugged in, which `/dev/ttyUSB0` does not.

```ini
port = /dev/serial/by-id/usb-FTDI_FT232R_USB_UART_A50285BI-if00-port0
```

If nothing is listed, the adapter is not being recognised. `dmesg | tail` after
plugging it in says what the kernel made of it.

The web interface offers these devices as a list, which saves the typing.

## Every option

Straight out of `weewx.drivers.cc3000`, with what its author wrote above each one.

#### port

Serial port such as /dev/ttyS0, /dev/ttyUSB0, or /dev/cuaU0

Default is `/dev/ttyUSB0`.

#### model

The station model, e.g., CC3000 or CC3000R

Default is `CC3000`.

#### driver

The driver to use:

Default is `weewx.drivers.cc3000`.

## More than one station

This driver is one station among however many others. Which of them fills `outTemp`, and
where the rest of their readings go, is in [Several stations](Several-stations).