From 1a27a584361ca82ae46c30d7fe8f44da98e01226 Mon Sep 17 00:00:00 2001
From: hiveeyes Workbench <hello@hiveeyes.org>
Date: Wed, 4 Jan 2017 17:51:21 +0100
Subject: [PATCH] prepare RaspIO Makefile

---
 generic/Makefile-Linux-RaspIO.mk | 94 ++++++++++++++++++++++++++++++++
 1 file changed, 94 insertions(+)
 create mode 100644 generic/Makefile-Linux-RaspIO.mk

diff --git a/generic/Makefile-Linux-RaspIO.mk b/generic/Makefile-Linux-RaspIO.mk
new file mode 100644
index 0000000..0efc728
--- /dev/null
+++ b/generic/Makefile-Linux-RaspIO.mk
@@ -0,0 +1,94 @@
+### DISCLAIMER
+### This is an example Makefile and it MUST be configured to suit your needs.
+### For detailled explanations about all the avalaible options,
+### please refer to https://github.com/sudar/Arduino-Makefile/blob/master/arduino-mk-vars.md
+
+### PROJECT_DIR
+### This is the path to where you have created/cloned your project
+PROJECT_DIR       = ../..
+
+### AVR_GCC_VERSION
+### Check if the version is equal or higher than 4.9
+AVR_GCC_VERSION  := $(shell expr `avr-gcc -dumpversion | cut -f1` \>= 4.9)
+
+### ARDMK_DIR
+### Path to the Arduino-Makefile directory.
+ARDMK_DIR         = $(PROJECT_DIR)/tools/Arduino-Makefile
+
+### ARDUINO_DIR
+### Path to the Arduino application and ressources directory.
+ARDUINO_DIR       = /usr/share/arduino
+
+### USER_LIB_PATH
+### Path to where the your project's libraries are stored.
+USER_LIB_PATH     =  $(realpath $(PROJECT_DIR)/libraries)
+
+### BOARD_TAG & BOARD_SUB
+### For Arduino IDE 1.0.x
+### Only BOARD_TAG is needed. It must be set to the board you are currently using. (i.e uno, mega2560, etc.)
+# BOARD_TAG         = mega2560
+#BOARD_TAG         = uno
+#BOARD_TAG         = raspioduino
+#BOARD_TAG         = gertduino328
+
+### For Arduino IDE 1.6.x
+### Both BOARD_TAG and BOARD_SUB are needed. They must be set to the board you are currently using. (i.e BOARD_TAG = uno, mega, etc. & BOARD_SUB = atmega2560, etc.)
+### Note: for the Arduino Uno, only BOARD_TAG is mandatory and BOARD_SUB can be equal to anything
+#BOARD_TAG         = pro
+#BOARD_TAG         = uno
+#BOARD_SUB         = 8MHzatmega328 
+
+# RasPIO Hiveeyes, 2016-12-15
+# NOTE: to flash the raspiduino, this avrdude command is needed
+# sudo avrdude -P gpio -c gpio -p atmega328p -v -U flash:w:../bin/src/gert328/generic.hex
+
+BOARD_TAG         = gert328
+MCU = atmega328p
+F_CPU = 12000000L
+ISP_PROG = gpio
+FORCE_MONITOR_PORT = true
+
+### MONITOR_BAUDRATE
+### It must be set to Serial baudrate value you are using.
+MONITOR_BAUDRATE  = 115200
+MONITOR_CMD = picocom
+### AVR_TOOLS_DIR
+### Path to the AVR tools directory such as avr-gcc, avr-g++, etc.
+AVR_TOOLS_DIR     = /usr
+
+### AVRDDUDE
+### Path to avrdude directory.
+AVRDDUDE          = /usr/bin/avrdude
+
+
+AVRDUDE_CONF = /etc/avrdude.conf
+
+### CFLAGS_STD
+CFLAGS_STD        = -std=gnu11
+
+### CXXFLAGS_STD
+CXXFLAGS_STD      = -std=gnu++11
+
+### CPPFLAGS
+### Flags you might want to set for debugging purpose. Comment to stop.
+CXXFLAGS         = -pedantic -Wall -Wextra -fno-use-cxa-atexit 
+
+### If avr-gcc -v is higher than 4.9, activate coloring of the output
+ifeq "$(AVR_GCC_VERSION)" "1"
+    CXXFLAGS += -fdiagnostics-color
+endif
+
+### MONITOR_PORT
+### The port your board is connected to. Using an '*' tries all the ports and finds the right one.
+
+### don't touch this
+CURRENT_DIR       = $(shell basename $(CURDIR))
+
+### OBJDIR
+### This is were you put the binaries you just compile using 'make'
+CURRENT_DIR       = $(shell basename $(CURDIR))
+OBJDIR            = $(PROJECT_DIR)/bin/$(CURRENT_DIR)/$(BOARD_TAG)
+
+
+### path to Arduino.mk, inside the ARDMK_DIR, don't touch.
+include $(ARDMK_DIR)/Arduino.mk