Fetching latest commit…
Cannot retrieve the latest commit at this time.
|Type||Name||Latest commit message||Commit time|
|Failed to load latest commit information.|
NewRemoteSwitch library v1.0.0 (20121229) for Arduino 1.0 Made by Randy Simons http://randysimons.nl/ This library provides an easy class for Arduino, to send and receive signals used by some common "new style" 433MHz remote control switches. There are two styles of remote: - "old style", which uses switches or a dial to set the house code. Use the RemoteSwitch library instead. - "new style", which use a button on the receivers to "learn" a signal. Use this library. License: GPLv3. See ./NewRemoteSwitch/license.txt Latest source and wiki: https://bitbucket.org/fuzzillogic/433mhzforarduino Installation of library: - Make sure Arduino is closed - Copy the directory NewRemoteSwitch to the Arduino library directory (usually <Sketchbook directory>/libraries/) See http://arduino.cc/en/Guide/Libraries for detailed instructions. Default installation demo: - Connect the data-out-pin of a 433MHz receiver to digital pin 2. See photo. (Note: your hardware may have a different pin configuration!) - Start Arduino, and open the example: File -> Examples -> NewRemoteSwitch -> ShowReceivedCode or ShowReceivedCodeNewRemote. - Compile, upload and run - Open serial monitor in Arduino (115200 baud) - Press buttons on a 433MHz-remote, and watch the serial monitor Changelog: NewRemoteSwitch library v1.0.0 (20121229) for Arduino 1.0 - Support for receiving A-series Klik-aan-klik-uit remote. (NewRemoteReceiver) - With examples to test and demonstrate.