From 65fcaaaa82d0b33950f0061a9343dbdc29eeaa0a Mon Sep 17 00:00:00 2001 From: Hendrik Busch Date: Mon, 23 Apr 2012 23:43:58 +0200 Subject: [PATCH] Fixed serious bug: the register's CLEAR pin is now pulled high instead of low. The CLEAR pin of the 74HC595 was accidentally connected to ground, pulling it low and thereby active all the time, preventing the register from working normally. It is now pulled to high and thereby inactive, allowing normal operation. The board now bears the version 1.1. The board has been updated to use the parts from the new sub-libraries. The last throughole resister has been replaced with an 1206 surface mount version. The lower right mounting has been moved to the left of the connector and can now actually be used even with a locking connector attached. All of the writing is now on the appropriate layer. --- .../simple-8-digit-connector-board.brd | 151 ++-- .../simple-8-digit-connector-board.sch | 713 +++++++++--------- 2 files changed, 457 insertions(+), 407 deletions(-) diff --git a/SevenSegment/eagle-files/simple-8-digit-connector-board.brd b/SevenSegment/eagle-files/simple-8-digit-connector-board.brd index 949eed2..f5d6096 100644 --- a/SevenSegment/eagle-files/simple-8-digit-connector-board.brd +++ b/SevenSegment/eagle-files/simple-8-digit-connector-board.brd @@ -1,6 +1,6 @@ - + @@ -77,24 +77,24 @@ -http://www.icanmakeit.de -Seven-Segment Board v1.0 -+5V -GND -REG_CLOCK -REG_DATA -REG_LATCH -!REG_ENABLE -DEC_CLOCK -DEC_RESET -https://github.com/hmbusch +http://www.icanmakeit.de +Seven-Segment Board v1.1 ++5V +GND +REG_CLOCK +REG_DATA +REG_LATCH +!REG_ENABLE +DEC_CLOCK +DEC_RESET +https://github.com/hmbusch - + http://www.icanmakeit.de https://github.com/hmbusch -Seven-Segment Board v1.0 +Seven-Segment Board v1.1 +5V GND REG_CLOCK @@ -103,7 +103,7 @@ !REG_ENABLE DEC_CLOCK DEC_RESET -Seven-Segment Board v1.0 +Seven-Segment Board v1.1 @@ -295,6 +295,24 @@ IC size 3.9mm x 9.9mm >VALUE + + + +<h1>ICMI Custom Parts - Passive Components</h1> + <p>This library contains a selection of passive components such as resistors and capacitors.</p> + <p>You can always find the latest version of this library under <a + href="https://github.com/hmbusch/PCB-Designs/tree/master/EAGLE-Libraries">https://github.com/hmbusch/PCB-Designs/tree/master/EAGLE-Libraries</a></p> + <p><span xmlns:dct="http://purl.org/dc/terms/" href="http://purl.org/dc/dcmitype/Dataset" + property="dct:title" rel="dct:type">ICMI Custom Parts for EAGLE</span> by <a + xmlns:cc="http://creativecommons.org/ns#" + href="https://github.com/hmbusch/PCB-Designs/tree/master/EAGLE-Libraries" property="cc:attributionName" + rel="cc:attributionURL">Hendrik Busch</a> is licensed under a <a rel="license" + href="http://creativecommons.org/licenses/by-nc-sa/3.0/de/">Creative Commons + Attribution-NonCommercial-ShareAlike 3.0 Germany License</a>.</p> + <p><a rel="license" href="http://creativecommons.org/licenses/by-nc-sa/3.0/de/"><img + alt="Creative Commons License" style="border-width:0" + src="http://i.creativecommons.org/l/by-nc-sa/3.0/de/88x31.png" /></a></p> + <strong>Resistor, SMD package 1206</strong> @@ -315,7 +333,17 @@ IC size 3.9mm x 9.9mm - + + + +<h1>ICMI Custom Parts - Connectors</h1> +<p>This library contains basic connectors (mainly pin headers) with various different packages.</p> + <p>You can always find the latest version of this library under <a + href="https://github.com/hmbusch/PCB-Designs/tree/master/EAGLE-Libraries">https://github.com/hmbusch/PCB-Designs/tree/master/EAGLE-Libraries</a></p> +<p><span xmlns:dct="http://purl.org/dc/terms/" href="http://purl.org/dc/dcmitype/Dataset" property="dct:title" rel="dct:type">ICMI Custom Parts for EAGLE</span> by <a xmlns:cc="http://creativecommons.org/ns#" href="https://github.com/hmbusch/PCB-Designs/tree/master/EAGLE-Libraries" property="cc:attributionName" rel="cc:attributionURL">Hendrik Busch</a> is licensed under a <a rel="license" href="http://creativecommons.org/licenses/by-nc-sa/3.0/de/">Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Germany License</a>.</p> +<p><a rel="license" href="http://creativecommons.org/licenses/by-nc-sa/3.0/de/"><img alt="Creative Commons License" style="border-width:0" src="http://i.creativecommons.org/l/by-nc-sa/3.0/de/88x31.png" /></a></p> + + @@ -373,7 +401,8 @@ IC size 3.9mm x 9.9mm ->NAME +>NAME + 1 8 @@ -401,31 +430,6 @@ IC size 3.9mm x 9.9mm - -<strong>Resistor, 1/4W, axial</strong> - -<p>Grid 0.5 inch / 12.7 mm</p> - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - @@ -653,29 +657,29 @@ design rules under a new name. - + - + - + - + - + - + - + - - + + @@ -1039,9 +1043,17 @@ design rules under a new name. + + + + + + + + + - @@ -1062,9 +1074,6 @@ design rules under a new name. - - - @@ -1083,9 +1092,10 @@ design rules under a new name. - + + @@ -1355,26 +1365,29 @@ design rules under a new name. - - - - - - - - - - + + - - - + + + + + + + + + + + + + + diff --git a/SevenSegment/eagle-files/simple-8-digit-connector-board.sch b/SevenSegment/eagle-files/simple-8-digit-connector-board.sch index f965df9..5e7e660 100644 --- a/SevenSegment/eagle-files/simple-8-digit-connector-board.sch +++ b/SevenSegment/eagle-files/simple-8-digit-connector-board.sch @@ -1,6 +1,6 @@ - + @@ -268,51 +268,6 @@ IC size 3.9mm x 9.9mm - -<strong>Resistor, SMD package 1206</strong> - - - - - - - - ->NAME ->VALUE - - - - - - - - - -<strong>Resistor, 1/4W, axial</strong> - -<p>Grid 0.5 inch / 12.7 mm</p> - - - - - - - - - - - - - - - - - - ->NAME ->VALUE - <strong>18-lead Small Outline Package Wide Body (0.3in / 7.5mm)</strong> <p>SOIC18 (W)</p> @@ -373,189 +328,6 @@ IC size 3.9mm x 9.9mm >VALUE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME -1 -8 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ->NAME -1 -8 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - @@ -727,47 +499,6 @@ voltage.</p> - -<h1>Resistor Symbol, EU-style</h1> - - - - ->NAME ->VALUE - - - - -<strong>Generic 8-pin connector symbol</strong> - - - - ->NAME - - - - - - - - - - - - - - - - - - - - - - - @@ -1028,6 +759,136 @@ voltage.</p> + + + +<b>Supply Symbols</b><p> + GND, VCC, 0V, +5V, -5V, etc.<p> + Please keep in mind, that these devices are necessary for the + automatic wiring of the supply signals.<p> + The pin name defined in the symbol is identical to the net which is to be wired automatically.<p> + In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p> + <author>Created by librarian@cadsoft.de</author> + + + + + + +>VALUE + + + + +>VALUE + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + +<b>SUPPLY SYMBOL</b> + + + + + + + + + + + + + + +<h1>ICMI Custom Parts - Passive Components</h1> + <p>This library contains a selection of passive components such as resistors and capacitors.</p> + <p>You can always find the latest version of this library under <a + href="https://github.com/hmbusch/PCB-Designs/tree/master/EAGLE-Libraries">https://github.com/hmbusch/PCB-Designs/tree/master/EAGLE-Libraries</a></p> + <p><span xmlns:dct="http://purl.org/dc/terms/" href="http://purl.org/dc/dcmitype/Dataset" + property="dct:title" rel="dct:type">ICMI Custom Parts for EAGLE</span> by <a + xmlns:cc="http://creativecommons.org/ns#" + href="https://github.com/hmbusch/PCB-Designs/tree/master/EAGLE-Libraries" property="cc:attributionName" + rel="cc:attributionURL">Hendrik Busch</a> is licensed under a <a rel="license" + href="http://creativecommons.org/licenses/by-nc-sa/3.0/de/">Creative Commons + Attribution-NonCommercial-ShareAlike 3.0 Germany License</a>.</p> + <p><a rel="license" href="http://creativecommons.org/licenses/by-nc-sa/3.0/de/"><img + alt="Creative Commons License" style="border-width:0" + src="http://i.creativecommons.org/l/by-nc-sa/3.0/de/88x31.png" /></a></p> + + +<strong>Resistor, SMD package 1206</strong> + + + + + + + + +>NAME +>VALUE + + + + + + + + + +<strong>Resistor, 1/4W, axial</strong> + + <p>Grid 0.5 inch / 12.7 mm</p> + + + + + + + + + + + + + + + + + + +>NAME +>VALUE + + + + +<h1>Resistor Symbol, EU-style</h1> + + + + +>NAME +>VALUE + + + + + @@ -1053,6 +914,234 @@ voltage.</p> + + + +<h1>ICMI Custom Parts - Connectors</h1> +<p>This library contains basic connectors (mainly pin headers) with various different packages.</p> + <p>You can always find the latest version of this library under <a + href="https://github.com/hmbusch/PCB-Designs/tree/master/EAGLE-Libraries">https://github.com/hmbusch/PCB-Designs/tree/master/EAGLE-Libraries</a></p> +<p><span xmlns:dct="http://purl.org/dc/terms/" href="http://purl.org/dc/dcmitype/Dataset" property="dct:title" rel="dct:type">ICMI Custom Parts for EAGLE</span> by <a xmlns:cc="http://creativecommons.org/ns#" href="https://github.com/hmbusch/PCB-Designs/tree/master/EAGLE-Libraries" property="cc:attributionName" rel="cc:attributionURL">Hendrik Busch</a> is licensed under a <a rel="license" href="http://creativecommons.org/licenses/by-nc-sa/3.0/de/">Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Germany License</a>.</p> +<p><a rel="license" href="http://creativecommons.org/licenses/by-nc-sa/3.0/de/"><img alt="Creative Commons License" style="border-width:0" src="http://i.creativecommons.org/l/by-nc-sa/3.0/de/88x31.png" /></a></p> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME + +1 +8 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +>NAME +1 +8 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +<strong>Generic 8-pin connector symbol</strong> + + + + +>NAME + + + + + + + + + + + + + + + + + + + + + + + + + @@ -1073,7 +1162,7 @@ voltage.</p> - + @@ -1092,58 +1181,6 @@ voltage.</p> - -<b>Supply Symbols</b><p> - GND, VCC, 0V, +5V, -5V, etc.<p> - Please keep in mind, that these devices are necessary for the - automatic wiring of the supply signals.<p> - The pin name defined in the symbol is identical to the net which is to be wired automatically.<p> - In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p> - <author>Created by librarian@cadsoft.de</author> - - - - - - ->VALUE - - - - ->VALUE - - - - - -<b>SUPPLY SYMBOL</b> - - - - - - - - - - - - -<b>SUPPLY SYMBOL</b> - - - - - - - - - - - - - @@ -1173,20 +1210,20 @@ voltage.</p> - - - - - - - - - + + + + + + + + - + + @@ -1214,7 +1251,6 @@ voltage.</p> - @@ -1228,6 +1264,7 @@ voltage.</p> + @@ -1715,14 +1752,14 @@ voltage.</p> - - - - + + + +